No video
HOW TO CUT VINYL PLANK FLOORING
Рет қаралды 53,658
Күн бұрынIn this video i show how to cut vinyl plank flooring by hand with a traditional utility knife and with a vinyl plank guillotine cutter so you can choose whats best for your project.
This video is sponsored. Some product links are affiliate links which means if you buy something we'll receive a small commission. Thank you for your support!
SHOP Tools4Flooring.....tools4flooring...
Concave Blades......tools4flooring...
D Cut UX 350 Multi Flooring Cutter....tools4flooring...
D Cut AK 360 Universal Flooring Cutter....tools4flooring...
Flooring Cutters....tools4flooring...
@nicholasbrannick9443 4 ай бұрын
Good video. Thank you for providing.
@MsABee1 3 ай бұрын
Great video!!! Thank you for taking the time to share & show!! 🙌🏽
@patriciahuyler4605 Жыл бұрын
Thanks for showing you can do it without fancy tools.
@joelgonzales8342 Жыл бұрын
I literally do tens of thousands of square feet of laminate and LVT planking a year. I'm gonna get me that AK 360!
@FloorsbySouthernboys Жыл бұрын
Great tool
@BriantFabela 4 ай бұрын
Exactly what I was looking for thank you sir
@etmesi 2 ай бұрын
Not all cutters cut lengthwise, For example, Lowes has a $250 cutter that cuts easily and is large but does not cut lengthwise. Using a table saw with new floors with backing added to the Vinyl makes confetti all over the place, these cutters are needed.
@stew8834 4 ай бұрын
Knife works if the flooring is paper thin. I've laid tons of flooring and never use a knife. Compound saw and table saw to rip.
@FloorsbySouthernboys 4 ай бұрын
Thank you
@Paidjig Жыл бұрын
Very informative,thanks you
@ghuff225 Жыл бұрын
Great video! Easy to watch and very informative. Thank you!
@FloorsbySouthernboys Жыл бұрын
Thank you Glad you liked it.
@germsytoad9405 2 жыл бұрын
You can tell this guy's legit just based on the fact that he's using a pair of ProKnee's! They are worth their weight in gold. A little spendy but worth the investment and I've got 5 years out of mine so far and still going. Great video. Just got the D-Cut ak360 today and am excited to try it out. My initial criticism though is that it is ridiculously heavy. Transporting it will not be fun, so I'll probably continue to use the lighter model for most installs.
@DtomDOJ Жыл бұрын
Knee rollers are way better.You should try it.
@germsytoad9405 2 ай бұрын
@@DtomDOJ We gave a couple. We call em' tard carts where I work 😄. They work well in certain applications.
@chrisrrasberry 11 ай бұрын
Thank you! Super helpful for my project!
@FloorsbySouthernboys 11 ай бұрын
You’re welcome. I’m glad that it was able to help.
@VFizz 2 жыл бұрын
Great vid! Super helpful for my current floor project :)
@FloorsbySouthernboys 2 жыл бұрын
Awesome, good luck on your project
@hookedonthebay3890 Жыл бұрын
I use a D cut (forgot model#) to cut vinyl millwork base. It's a money maker for sure!!! Good investment
@FloorsbySouthernboys Жыл бұрын
Yes sir, they are a great product. All of them are.
@stevefoley9448 Жыл бұрын
Great video, thank you.
@FloorsbySouthernboys Жыл бұрын
Thank you, glad to help
@harrytackett1645 3 жыл бұрын
Great instructions, thanks!
@FloorsbySouthernboys 3 жыл бұрын
You’re welcome, glad you liked it
@OldfieldSo 2 жыл бұрын
thank you for the video
@shawnmoore5621 3 жыл бұрын
Hey Ruben hope all's going good for you and your family!
@FloorsbySouthernboys 3 жыл бұрын
Yes sir everything is good, I hope you and yours is good as well and I hope your son is catching on to the trade really good
@greenresidential6026 11 ай бұрын
Great presentation!
@FloorsbySouthernboys 11 ай бұрын
Thank you
@tonton282 2 ай бұрын
Can i know what the brand you used?
@reidcustomfurniture Жыл бұрын
What type brand of knee pads are they.? They look great
@PedroHernandez-ou5wy Жыл бұрын
I like your video i have a question? With one is good to cut 8mm I'm goin with a Corter Calipso oak and I want a clean cut!!
@chorizobear8447 8 ай бұрын
Is the bigger d cut the 360 model?
@barbarad.edmondson2297 3 жыл бұрын
how do you work around the vinyl planks coming out away from the previous plank most likely due to uneven walls?
@blank7643 2 жыл бұрын
The planks interlock and can't separate when connected properly. The planks shouldn't actually touch the wall, they fit under your baseboard and quarter round trim. Your first and last row should split the difference on how much you need to cut off.
@willlard3981 Жыл бұрын
Quick question! I’ve got some floor I can get cheap but a lot of the ends are chipped. Can the flooring still be used?
@FloorsbySouthernboys Жыл бұрын
If you are OK with the chips, then in your floor, you will not be able to cut out all of the chips. If a lot of them are damaged, you could get rid of some of them by using them for end cuts but that will only get you so far.
@ejg34 3 жыл бұрын
Question is how thick does the d cut allow for rip cuts. Some of these planks are thick.
@FloorsbySouthernboys 3 жыл бұрын
1/5” thickness
@user-bp4up3uo3q Жыл бұрын
Does this do Rip Cuts on SPC ( Rigid Core ) LVP ? Lifeproof 8mm with 22mil wear layer. ?
@FloorsbySouthernboys Жыл бұрын
Yes it sure does 😄👍
@user-bp4up3uo3q Жыл бұрын
@@FloorsbySouthernboys Sorry I should said does the large handle tool rip Lifeproof Rigid Core LVP without cracking ?
@FloorsbySouthernboys Жыл бұрын
@@user-bp4up3uo3q yes sir I have not had a problem with it with any product
@kylercarlisle2108 3 жыл бұрын
How would you say the d cut cg230 compares to the bullet magnum 13in shear? I’ve really been eyeing that guy up. Thanks Ruben been following you on fioa and your channel for awhile now great stuff man!
@FloorsbySouthernboys 3 жыл бұрын
The bullet magnum is definitely a heavier duty Cutter, that’s why it cost two or three times more than the CG 230, the CG 230 is just so small lightweight and super easy to deal with makes it my favorite, I only use it for vinyl plank however it is rated for laminate and engineered hardwood
@kylercarlisle2108 3 жыл бұрын
@@FloorsbySouthernboys I definitely meant to say marksman instead of magnum but hey thanks man I really appreciate it I was looking to pick one up for vinyl plank. The dcut seems to work really well with vinyl plank
@EricReitzel 6 ай бұрын
Ive got the big Bullet shear and Im just now finding the D-cut shear that can make notched cuts and rips and wanting one if that helps.I'll sell you my Bullet for $400...lol
@jack91522 2 жыл бұрын
Dont they make a blade specifically for this for a table saw?
@FloorsbySouthernboys 2 жыл бұрын
They probably do
@carpet180 3 жыл бұрын
👍🏻
@FloorsbySouthernboys 3 жыл бұрын
😀👍
@ejg34 3 жыл бұрын
Buy a straight edge with a rubber backing.
@FloorsbySouthernboys 3 жыл бұрын
👍
@emmanuelgutierrez8616 2 жыл бұрын
What about a wet saw?
@khsprotechnik8217 Жыл бұрын
Hi, shipping to Germany (D Cut AK 360) 1000 $ ??????????
@FloorsbySouthernboys Жыл бұрын
Oh snap
@Albanian1 2 жыл бұрын
Link to the tools please
@TheHchee Жыл бұрын
How do follow an uneven wall?
@TheHchee Жыл бұрын
with that last cut surely you need to scribe from the wall?
@FumblingButtons Жыл бұрын
"we got a nice clean cut right there" *edits video* shows cut
@FloorsbySouthernboys Жыл бұрын
😂😂
@rickss69 3 жыл бұрын
No links as promised...
@FloorsbySouthernboys 3 жыл бұрын
Snap I forgot, I’ll get them now
@FloorsbySouthernboys 3 жыл бұрын
Got them
@Yorkie285 3 жыл бұрын
You sure do say "ok" a lot.
@FloorsbySouthernboys 3 жыл бұрын
sorry
@fatmanstudios5335 3 жыл бұрын
So what quit trolling
@FloorsbySouthernboys 3 жыл бұрын
@@fatmanstudios5335 😂😂👍
So That's How You Do That!
Рет қаралды 779 М.
So That's How You Do That!
Рет қаралды 72 М.