Flosstube Special: Tips for DIY Floss Drops
Рет қаралды 571
8 ай бұрынIn this video I share some tips and suggested materials for cutting your own floss drops/ thread drops. Below I've listed the dimensions of my floss drops, the sizes of the holes I cut and links to the products I used. Please comment if you have any questions!!
Floss Drops - 2.02 inches high and 2.75 inches wide
Top hole - 0.25 inches diameter
Thread hole - 0.875 inches (7/8 inch) diameter
Poster Board - www.target.com/p/12ct-11-39-3...
Cardstock - www.michaels.com/product/heav...
Paper design printable - www.gathered.how/papercraft/f...
@suejameson1517 8 ай бұрын
They are lovely. I need to find a friend with a Cricut!
@sewfullyme 8 ай бұрын
Thank you!
@MonaDidWhat 7 ай бұрын
Came from Brenda at Mount Scrapmore
@carlaatkins2619 7 ай бұрын
Did you try gluing two pieces of Card stock after printing? 🎶💐💖
@sewfullyme 7 ай бұрын
No I didn't! I've seen others use that technique. I should try it. I was nervous to do it because I didn't want my floss drops to come unglued while using them. But I should see how long it lasts; maybe it's not as big of a deal as I think. Thanks for suggesting!
Cindys Adventures in Stitching
Рет қаралды 4,8 М.
Wild Berry Quilting
Рет қаралды 326
Chantelle Deimling -141 Design Company
Рет қаралды 5 М.
StitchyFix
Рет қаралды 1,9 М.
Annette's Needles
Рет қаралды 4,9 М.
Diamond Painting by Doni
Рет қаралды 9 М.