FLUX beamo Materials Testing with 3D Universe

No video

FLUX beamo Materials Testing with 3D Universe

Рет қаралды 11,628

Күн бұрын

Jen Owen of 3D Universe has been learning to use her FLUX beamo laser cutter and testing lots of different materials in the process.
In this video, Jen shares her experiences with different materials she's tested. Watch the video to learn just how versatile the FLUX laser cutters are.
To purchase or learn more, please visit shop3duniverse...

Пікірлер: 34

@CraigH999 2 жыл бұрын

I'd try a spray adhesive with the leaves and stick them onto a thin cardstock. Great video thanks for sharing your experiments!

@MaximSupernov 3 жыл бұрын

I tested with leather. You need to soak the leather into the water first, the moist leather will less likely to have burn edges.

@thetravelingdork 3 жыл бұрын

Thank you so much!!

@ambiely 3 жыл бұрын

This has been very informative. Thanks!

@pameladeramusheard2312 2 жыл бұрын

Thank you so much. I have the air filter but it stopped working. Will you create more videos on how to make larger projects? I have some files for some tool holders but I don't know how to separate them on to different pages.

@andreabriones9101 2 жыл бұрын

Please more tutorials for regulating power/speed in acrylic hood 🙏🥰

@zer0six472 2 жыл бұрын

Great video thank you 🙏

@lfields249 3 жыл бұрын

Are you using the Beamo Air unit yet? If so, did it help with fumes. Also what thickness (2mm, 3mm) did you use for the acrylic and machine settings for the acrylic. Thank you.

@thetravelingdork 3 жыл бұрын

Yes! It helps a lot. We have ours set up in the garage and for the most part it keeps the fumes at bay but when my roommate engraves on bone or antler, it smells really bad and we try to open the garage door for that! I believe my acrylic was 2mm thick and I used the settings that were pre programed in there.

@tracisusong6991 3 жыл бұрын

Hi how do you know what settings to use on your materials? What was your thickness for the acrylic

@thetravelingdork 3 жыл бұрын

I used the default settings on most of the things I have tried and then adjust speed or power depending on a test run before I do the real cut or etch to make sure it is what I want it to look like. :) I used 1/8 acrylic for this project. :)

@lolasmith5415 Ай бұрын

Hi! I’ve had my beamo for over three years and I’ve only tried using it twice. Do you provide personal training and or do you know if anyone that does?

@3duniverseOrgWelcomesYou 23 күн бұрын

We don't offer personal training for laser cutters at this time, but have you seen the FLUX Laser Cutter 101 curriculum? flux3dp.com/flux-curriculum-laser-cutter-101/

@martinsmith6049 3 жыл бұрын

Looks like fun!

@thetravelingdork 3 жыл бұрын

It is so much fun!!

@joshwardlow8884 3 жыл бұрын

How loud is it when cutting? I just got one and it has a very loud cackling sound

@jeeper22002 3 жыл бұрын

Can you engrave on bigger pieces by removing the floor?

@thetravelingdork 3 жыл бұрын

Yes. I was able to remove the metal piece on the bottom and it gave me another inch or so of room so I could do the top of a box that I made for a friend for Christmas. :)

@gregsandy6560 3 жыл бұрын

Jen could you help me out on another problem other then materials. I want to import and image (lettering) from WORD to beamo. I can get the word spelling on the grid but can not make it load and print. What i do get is square blocks on the grid with out the lettering when I hit print preview.

@3duniverseOrgWelcomesYou 3 жыл бұрын

Jeremy here, jumping in for Jen (I deal with the more technical stuff). Rather than dealing with the complexities of exporting from Word in the appropriate format, wouldn't it be easier to just use the text tool built into the Beam Studio software? Just click the T button in the left-side toolbar to add text. You can position and rotate it as needed. Then you can use the formatting controls in the right-side panel to adjust font, size, etc. If that doesn't do what you need, please clarify what you're trying to do, and I'll provide further advice.

@fernandojimenez3705 Жыл бұрын

Is there any good setting for silicone watch bands?

@3duniverseOrgWelcomesYou Жыл бұрын

That's not something we've tested. The best option would be to do some testing to identify the right settings. If you open the Beam Studio software and look under File > Examples, you'll find an Engraving Test and a Cutting Test option. This will make a series of engravings or cuts using different settings so you can see which works best.

@lepynkcreations7890 3 жыл бұрын

What settings did you use for the paper?

@thetravelingdork 3 жыл бұрын

I believe I used the fabric engraving setting. :)

@emraheski3410 2 жыл бұрын

Can you also make a rubber stamp?

@3duniverseOrgWelcomesYou 2 жыл бұрын

You can! Another KZfaqr showed how to do that with a different laser cutter in this video: kzfaq.info/get/bejne/hsVoqNGpqq2plIk.html

@k23raj2 3 жыл бұрын

is it work on gold ?

@nellieglade1351 3 жыл бұрын

What settngs did you use for the MDF board? Can't get mine to cut through

@3duniverseOrgWelcomesYou 3 жыл бұрын

We used Power = 60%, Speed = 0.2 in/sec, 1 pass. But we did have a little burning around the edges, so a slightly lower power setting might be okay. You may want to use the material cutting test that's included within Beam Studio. Just go to File > Examples > Material Cutting Test. That will cut a bunch of squares at different power levels and speeds. Then you can just see which one cut best.

@lnita9058 3 жыл бұрын

what size acrylic did you use and do you have a link to where you purchased it?

@3duniverseOrgWelcomesYou 3 жыл бұрын

We usually get our acrylic from Inventables (www.inventables.com/categories/materials/acrylic). 8x10" would be the ideal size, but the 8x12" pieces they sell are okay - it will just overlap the sides of the work area a little.

@tonyburzio4107 2 жыл бұрын

Oddly enough, I get the acrylic from Home Depot, masquerading as window glass.