@mgbfpv 4 ай бұрын
Hi. Have You measured the required lenght for the coaxial cable of the o3? The default cable is too long but I'm nott sure if 60mm would be enough
@velocistafpv 4 ай бұрын
Yup, the stock cable is waaay too long. I think around 80-90mm would be good with a little a bit of slack. Unfortunately, it's either 60mm or 100mm where as the stock is 150mm. I would perhaps go for the 100mm with a bit of slack just in case.
@dubsrcfpvandfamilyfuntimes913 5 ай бұрын
Rad flying man. ❤ looks like a real nice drone. Take care bud
@velocistafpv 5 ай бұрын
Thanks, man! Keep on flying! 😘😘😘
@ko1n570 Ай бұрын
how long flight time ? 4 - 5 minutes ?
@velocistafpv Ай бұрын
3-4 mins if I send it, 5-6 mins if slow cinematic.
@damaca_fpv 5 ай бұрын
Hi man. Great Fly. I have a very similar setup, would you share your filters and pid with a friend? 😅 I am having some vibrations on my footage
@velocistafpv 5 ай бұрын
Thanks bro! I'm actually using Supafly's preset tune in BF (the 3"/4" tune), didn't change anything and with the Dynamic Notch Filter off (as what Supafly recommends). Hope this helps!
@ravib.p5635 5 ай бұрын
3.6 props is okay with volador 3.5?
@velocistafpv 5 ай бұрын
Yes! Officially, FlyfishRC says 3.5" (I asked) but I'm using Gemfan 3630 with no issues.
@strykerfpv 2 ай бұрын
@@velocistafpv yeah you need them. 2105 is muchhhh to large for 3.5-3.6in props and make more sense for 4.5in so they are pretty nessecary
@user-jg5rg3nc5v 4 ай бұрын
bro, can you share the pid
@velocistafpv 4 ай бұрын
hey bro. I'm just using the Supafly preset in Betaflight. Hope that helps!
The Wall Street Journal
Рет қаралды 386 М.
Velocista FPV
Рет қаралды 103
Фани Хани
Рет қаралды 1,4 МЛН
Velocista FPV
Рет қаралды 36
McLogo76
Рет қаралды 482
Velocista FPV
Рет қаралды 42
Velocista FPV
Рет қаралды 33
Velocista FPV
Рет қаралды 20
Velocista FPV
Рет қаралды 122