John Deere tractor with a BLOWN ENGINE for $1k?! WE’RE IN! Pt. 1

No video

John Deere tractor with a BLOWN ENGINE for $1k?! WE’RE IN! Pt. 1

Рет қаралды 1,172,059

Жыл бұрын

Abandoned John Deere Tractor with a spun crank bearings for a little over a thousand bucks, HECK YES!
Thank you for supporting companies that make our series HAPPEN!
Permatex is our go to for epoxies, silicone, threadlockers and so many more products we use left and right in our shop- www.permatex.com/
Tap here for more details on O’Rewards with our friends at O’Reilly! #OReillyPowered
www.oreillyaut...
Scoop up your next oil change from Kendall Motor Oil! estore.hicorpi...
For tires we go to Continental Tire! Our link below!
bit.ly/3h8Maa5
PEAK Auto for all the COOL FACTOR we need!!! Join the #PEAKsquad for free perks and that car fam feeling!
www.owi.com/re...
CRC Auto for SO MANY of our favorite products like Brakleen!
www.crcindustr...
Chicago Pneumatic for both electric impacts, compressors AND air tools! tools.cp.com/e...
Flying Sparks Garage official Website:
flyingsparksgar...
•INSTAGRAM & TikTok•
•@flyingsparksgarage
•@imemilyreeves
•@pilotreeves
FACEBOOK!
•Flying Sparks Garage
•Emily Williams Reeves

Пікірлер: 1 800

@SadPuppySoup Жыл бұрын

Watching the farmers fix tractors as a kid is what started my road to mechanics and hot rodding. I grew up on a farm fixing tractors with stick/arc welders and oxygen acetylene cutting torch and hand tools bigger then my fist so watching this is comforting and enjoyable. Good job on the rebuild!

@stevenneuwirth871 Жыл бұрын

I can see Aaron is getting excited the coder to startup nice job guys

@richardzackery9934 Жыл бұрын

You keep mentioning the boat videos and how surprised you was about the response to them, it’s not the content, (cars, trucks, boats, tractors, or whatever), it’s the two of you and what you do together that is entertaining! I’d like to add its GREAT to see you Both in the shop, Aaron looks so happy to be able to get his hands dirty again!

@chjp2346 Жыл бұрын

FYI, the front crank bearing/bushing bore has a chamfer on the inside to install the bushing from the inside with a bolt washer type tool to draw it into place. Also the rear crank bearing/bushing can be removed with a punch (drive on the center at an angle) install new bushing with a flat plate until flush.. Your welcome.

@BretWFL Жыл бұрын

I love this video. I am 50. My parents bought a farm when I was 13. The very first thing they bought was a brand new John Deere 650 to care for a small horse pasture. Love that tractor! Bush hog, snow blade, belly mower I wish I had the bucket. But at 13, what can you do? I do remember looking at the attachment brochure the dealership had often. Funny thing is, that was the first engine I have ever done service work on. By myself. I have been an engine builder for almost 30 years now. Thanks for the memories.

@nealscoggins4853 Жыл бұрын

All of your content is a joy to watch .just with you two working together makes it great keep up the great content and I'll keep watching

@BillB23 Жыл бұрын

What Neal said!

@chappyd5109 Жыл бұрын

Exactly...

@TokyoCraftsman Жыл бұрын

this

@dockey6942 Жыл бұрын

Yes iv saw her on another car show before trying to be cute

@nealscoggins4853 Жыл бұрын

@dockey6942 tring to be cute ? She doest have to try at all she a beautiful lady

@olsfield Жыл бұрын

Hell yeah i want to see more tractor content. Tractors are cool. Keep up the good work you two

@billgentry3679 Жыл бұрын

Aaron is very lucky to have a helper like you. Awsome video.

@AlistairBalister Жыл бұрын

simp

@henkholdingastate Жыл бұрын

With these you don't have the problem of modern tractors and that is that everything is completely stuffed with electronics. Oh your tractor doesn't work anymore..... too bad we don't support the software anymore. Buth buth.....sorry your problem.

@ben1canobe150 Жыл бұрын

Just a suggestion: Use a copper hammer or a copper bar to knock in gears, bearings etc... so you don't scar or break things. It just gives it a little bit of cushioning. Copper hammers/ mallets - are easy to make... and you can make a copper bar out of about any copper laying around. Brass will work too - but I prefer copper myself. Great job by the way - thanks for sharing. I love this stuff - keep it coming.

@lewisbolman7862 Жыл бұрын

Zinc works well too, work in a die shop and it doesn't chip as quick as brass or copper

@amberazurescale5617 Жыл бұрын

Shouldn't them bearings rather be pressed in?

@Kentor1701c 11 ай бұрын

I was thinking of a dead blow hammer, yes copper or brass is also better than steel on steel. Also a bench press and a hydraulic press may come in handy.

@wilds7867 10 ай бұрын

Or use a plastic dead shot hammer.

@bulldog5350 Жыл бұрын

Great seeing Aaron working on the engine, the man just looked happy doing something he loves. Great video you guys!

@LaneSherman Жыл бұрын

A refreshingly fun episode. Not that the regular stuff isn't great, it was cool to see how simple the tractor engine was.

@francisvantuyle Жыл бұрын

Gentlemen pay attention to this woman. She is very very rare. She jumps right in to help. She is never in the way. Asks all the right questions. Is not afraid of getting dirty. She loves her man. He loves her. She is also one in 10million. I had a wife like this. She got cancer and had to go. I sure do miss her.

@dustyrhodes9422 Жыл бұрын

what alot of people like seeing others who jump off and fix stuff, not just buy new shinny use and store. and the fact that yall both work together, not just 1 person and another videoing. if more folk did this simple work together and enjoy doing it. great channel

@MadScientistGarage Жыл бұрын

Sweet find! I love watching y'all fix anything that's a machine.

@bobmiller9058 Жыл бұрын

The first flying sparks video i saw was the $5000 boat episode and I said who are these guys that can do this?? Now we have a tractor so you got me. It is so great to see Aaron at what looks like to me at full speed with his dry humor in full force!

@billhoward7730 Жыл бұрын

Aaron is a very talent man, he tackles all these different projects with ease. I really enjoyed watching the tractor engine rebuild. Great job Aaron. Bill

@priceless222 Жыл бұрын

With the empowerment and gracefulness of you helping your husband there is nothing that man can't do... Your a great helper!!!

@RedNeckWelding Жыл бұрын

I wouldn’t worry much about that rear main bearing, I’ve seen far worse and they were running just fine. But I would advise that you invest in a lead hammer for assembly, reduces the likelihood of errant strikes causing any damage to the machined surfaces. Love all your content!

@bbwachter Жыл бұрын

I agree 100%. Tools are the life blood of any shop, buy once and always have the right one forever !

@waltmcconnell865 Жыл бұрын

It made me cringe everytime he got that hammer out, striking machined surfaces, gears, and driving that bearing in with a socket

@gqp4800 Жыл бұрын

Or brass ay least

@davidmorgan5525 Жыл бұрын

A plastic dead blow has served me well for years, a steel hammer on motor parts was a huge nono in my shop.

@davidamato768 Жыл бұрын

I had to look away every time he picked up the hammer. But that's ok...an old tractor on a budget build. Please get a brass or dead blow though😮

@MM_in_Havasu Жыл бұрын

It's all mechanical content, post it! I'm a retired diesel & heavy equipment mechanic myself with 35+ years in the business of mechanics, and this is an excellent tutorial on how to overhaul this little 2-banger diesel engine! Thank you guys for this video, and keep it all coming!

@cyberflyrg 4 күн бұрын

Great job rebuilding the JD. Love watching you two work together.

@johnjacobjinglehimerschmid3555 Жыл бұрын

Ok so here's what I find absolutely amazing. Your wife is right there doing with you. Now that's refreshing to see.

@daleschuler1720 Жыл бұрын

Being a gearhead I enjoyed the heck out of this episode. Great job Aaron

@harryfaberiii3261 Жыл бұрын

Good to see Aaron back in the swing of things. Not that watching Emily turn wrenches is a bad thing. Good to see you’ve recovered well. Look forward to hearing it run.

@davidmalzac3511 Жыл бұрын

So glad to see wrenches and ratchets being used for assembly, not impact drivers. Proof Aaron knows what he is doing. Just makes me cringe when the impact is used for assembly. Good job. And i like the tractor video. Make sure to show us some tractor work in the future too!

@richardmiller8407 Жыл бұрын

I retired 2 years ago after working on John Deere tractor's, combine's and sprayers for 35 years. Working on this size tractor is a lot more enjoyable then working on the newer one for sure. You did a great job on this yanmar engine. Enjoy you tractor.

@michaelhenderson5098 Жыл бұрын

Enjoyed the video. Thanks. Brings back a lot of memories. When I was a little tike about 3-4 y/o, dad would let me ride with him on his JD tractor. I think it was a 1950 something model poppin' Johnnie! :) with tricycle style front wheels. He had a 2 row corn picker and picked a lot of corn for other farmers. I rode in the wagon and played in the corn. :)

@ksokie63 Жыл бұрын

Hey Emily and Aaron 👋, cool little build going on there. It’s good to see what’s going to work for content. But that lunch you had off the grill looked delicious 😋. But thanks for sharing and have a great week ahead 👍

@thublit Жыл бұрын

First timer here! Takes me back to the family farms during summers I spent there and was put to "work". All a blast for me growing up. Spent some time making pistons for John Deere. Demanded very close tolerance work and by golly John Deere sure checked the parts received, great quality control.

@AIRPORT-mc2ys Жыл бұрын

MADE IN JAPAN BY SHIBAURA

@noahorr3480 Жыл бұрын

I have a 650 like this, it was handed down by my father and grandfather, the original owner. I love it, it does so much and demands so little! Mow, move dirt, dig holes, pick up engines, pull fence posts, drag logs, and it'll work for days on a few gallons of diesel. I'm so happy to see one getting restored. Now to watch the first start video!

@davidhill4711 Жыл бұрын

Great timing. I am rebuilding a small JD lawn tractor. Engine done, now stripping rust , then paint. Finally just waiting on replacement parts from JD. All under 1k that would have cost 3500+. Love it. John Deere's parts and manuals are great to help make it happen

@tylerbarrett6652 Жыл бұрын

Don't ever doubt these types of videos... a 2 cylinder diesel engine is rare enough... but to see you guys do this TOGETHER and then put the equipment to use is an excellent use of the channel (IMHO)... I'm sitting here worried that you won't show us the rest of the work on your tractor... and then you won't show us what you end up using it for. PLEASE keep this going for us. I love your channel... more for the types of people you are than for the content.

@MultiCrusher2 Жыл бұрын

That is a Yanmar /john deere

@hughmuir3063 Жыл бұрын

Variety is always good. Seeing each of you projects from beginning to end is very satisfying and educational. So thanks to both of you and keep up the good work.

@johnhintermaier7651 Ай бұрын

Tractors rock! Aaron, as a New York farm boy in the 1950s, John Deere and Farmall dominated the fields!

@robh649 Жыл бұрын

MORE TRACTORS!!!!!! My thanks to both of you for the great content of ALL types!

@douglasarmstrong2748 Жыл бұрын

This is a fun build on that little tractor. I am anxious to see it running and working. I am a John Deere guy myself so this is really fun to watch. Take care guys.

@talvalon999 Жыл бұрын

Loved watching you both do this rebuild, as an old timer and engine guy the only thing I can advise you on is to reduce your metal on metal contact. Don't use steel hammers on steel parts, there are softer alternatives or use a piece of smooth hardwood between the hammer and the part.

@walter2990 Жыл бұрын

I was saying that same thing. Get or make yourself a few brass hammers. You won't be using rat tail file's on deformed bearings again.

@larrycole1400 Жыл бұрын

I admire her attitude and participation.

@hayneshvac2 Жыл бұрын

Can't wait to hear it run...I don't know about anyone else, but the content is sold by the vibe, you two make for good entertainment...I love to watch anything mechanical too, so keep it coming. Thank you for all the time involved, and all the content you bring, and you awesome personalities!!!

@paulwillard5924 Жыл бұрын

Well done! I own two of these tractors, a 650 like yours (4wd but no bucket) and a 750 (3cyl 4wd with bucket) and both are super capable, easy to work on, handy as all get out! If folks out there need parts for these Yanmar built John Deere’s, Hoye Tractor parts in Texas is a great source!

@AverageCitizen333 Жыл бұрын

i grew up in a shop that fixed old tractors and farm machinery, and then later it was my first job. its been 15 years since i worked on a farm tractor probably, but i never lose interest in them.

@davidmahoy4478 Жыл бұрын

Since I’m an old farm boy, yea, I’d love to see you working on a tractor, any part of it. Wish I had something like that on my property. 🤠

@gregoyler944 Жыл бұрын

Love the tractor content! But then again all of your content has been great. Thanks for keeping it real and unscripted. Life happens!

@russse2793 Жыл бұрын

Love the Luv. Brings back memories on my old red Luv with a rusted out frame, It was my first bought truck, and I was very naive when I bought that thing, but It took me home multiple times while I was in the military. God bless.

@SF-fm7ov 11 ай бұрын

I grew up on the farm fixing things and farmed for 26 years until many hailstorms put me out of business. I transferred an F10 loader from an old truck frame to a 1970 Buick 225 with a 455 engine and an automatic transmission with a 4 speed Brownie behind that. I kept the heavy truck rear end as it carries the weight. I later bought a 4-wheel drive articulating loader. My hired man (who helped me with the build), always preferred driving the Buick loader. Too old to do this much now but enjoyed watching you two work together. I think if kids were exposed to this kind of creative thinking, we'd have less craziness in the world. Subscribed!

@jimbates955 Жыл бұрын

Great to see the engine rebuild, as it doesn’t matter what it propels. I feel the nostalgia Aaron feels towards the tractor, and the times spent with his grandpa. I think if there was a question that bearing needed replacing, y’all would have taken it to a machine shop to have it removed…

@lavernengelke8778 Жыл бұрын

Any thing you guys take apart and repair is a learning experience for us to watch; I'm 83 years old and you two inspire me with your automotive ability. I recently bought a poor old 1955 Olds with a 324 c.in. engine that hasn't been started for 20 years today I changed the oil and will begin the process of starting it up using Aaron's and VGG's technique of starting an old engine. Take care and keep the vids coming I watch them all. Thanks for all your tutoring and mechanical knowledge.

@cwdtransport2247 Жыл бұрын

I concur . ChiefD

@davidmcdaniel2615 Жыл бұрын

The great thing about watching you guys is that you enjoy working and being together. It seems that everything you do, no matter how difficult, you find a way to keep smiling. Good to see you smiling again Aaron! P.S. Is walking down a tool aisle and buying something you MIGHT need a bad thing? LOL!

@ritchiesokol1061 Жыл бұрын

I have an aviation background. The John Deere Tractor Fix Hook me. I used to wrench 🔧 for a living; now I push perfectly good snow and now I mow (run) over grass. Ritchie from Ankeny Airport in Iowa

@netfun8 Жыл бұрын

I bought the same tractor last summer. 5 foot brush hog works. Harrow and fert spreader worked great to plant grass. I enjoyed watching you guys get into the guts of your tractor.

@richsmith6952 Жыл бұрын

Watching tear down and reassembly is interesting. Great to see a skilled mechanic.

@SquareSasquatch Жыл бұрын

It’s fun watching you two work together and have fun. I don’t care what the project is.

@jonhaskell9630 Жыл бұрын

Any lady that picks up on the sound of an assembly as it finds home is a keeper! I like the Chemtool over the CRC simply because it doesn't leave a residue after flashing off. Nice video.

@braddokken9191 Жыл бұрын

You two are doing it right. Not only are you saving money but you will know a lot more about the condition of your tractor.

@j2kinflarc768 Жыл бұрын

If it’s got an engine in it and I get to watch you two working together, I’m in. Plus tractors are cool. Especially older ones that are simple workhorses.

@johndoherty8732 Жыл бұрын

Here's a great tip next time you want to do a degrease on a rebuild. It's much cheaper and will definitely remove paint for repainting. Buy a pound of 100% lye crystals (sodium hydroxide), use a 2 gallon pump up sprayer and fill with 2 gallon water, add sodium hydroxide mix and spray on. You'll be shocked how easy this works with just a garden hose to rinse. Just be super careful not to get any on you! But if you do, we call it the hydroxide dance. Almost all degreasers main ingredient is sodium hydroxide. Much cheaper and more effective as you can control what strength you want. John Doherty LykeNew Power Wash Salina Kansas Location

@jamesgilmore-thewaterplusg5470 Жыл бұрын

I am enjoying the smiles, laughter and seeing you two work together. Well done!

@davewilson8308 Жыл бұрын

I bought a JD 1025R new about 10 years ago for around 20K. With a bucket and hoe like mine they are selling for around 30K which is crazy. I absolutely love that little tractor it saves my back all the time! Keep doing the tractor videos they are very interesting.

@rustynail2205 Жыл бұрын

Enjoying the tractor content. It’s great to see Aaron wrenching away and his strength returning. I think it could be therapeutic for him too, diesel engines and a tractor similar to his childhood. Nice to see your pooch about too. OK, just got to the tacos part. Those looked amazing. Edit, now I see the chops. 😋

@rogerjustice8835 Жыл бұрын

Cool a Chevy luv that was my first vehicle,Mine was a 1980 4x4. Bought it in 1983 with my yard mowing and summer jobs money, ended up getting beat bad on the deal as truck had been involved in a serious accident and pieced back together. The frame was severely bent and it went down the road crab walking, it also eat tires at a staggering rate. The first set of tires I bought it spent a lot of money for and only got 3800 miles out of them before they were slick ( yes 3800 miles not 38000 ). It spent all my money trying to get it fixed including 3 different frame repair shops all to no avail, ended up selling it for virtually nothing a year and a half later. I definitely learned a valuable lesson in not everyone is honest and always check out or have someone check a used vehicle before you buy it. Y’all have a great day and God bless you.

@rontorrence 11 ай бұрын

The fact that you are overhauling the John Deere tractor is why I'm here. I listened about your problems and the fact that drinking is no longer a part of your life. I say good for you, your lives will be much better. Good luck to the both ohfyou

@thomaschumley3904 Жыл бұрын

I don't think it is the specific content that brings us all back, I think it is the literal joy that you show with every new project.

@PoconoJoe13 Жыл бұрын

Glade to see Aaron is feeling better. Health is number 1. I love all the content you guy’s do. Anytime you can bring something back is great. Also I get to lean something every time. Thanks for all the content you show

@dunk856 Жыл бұрын

Tractors heck yes!

@jessewatt3613 Жыл бұрын

The difference between a drinking person and a sober person is huge. The productivity of a sober person is off the charts no limits

@brandonmeyer9442 Жыл бұрын

Really enjoyed watching Aaron knock this out. I've been wrenching on cars my whole life but these diesel engines are a different animal. Very cool to really see his expertise in this one.

@SteveC38 Жыл бұрын

Y'all Are Awesome Together! I'll Be Back Tomorrow👍

@bobbywright5983 Жыл бұрын

I love seeing work done on older tractors.its a shame to see them just go to scrap

@jimmyjenkins9240 Жыл бұрын

What a joy it is to watch a master mechanic do his dance! Thanks for filming this and I hope it’s loved enough that we get to see more tractor work!

@edharry3984 Жыл бұрын

Aaron I can relate to your love of this tractor. On a smaller scale I had an International Harvester Cub Cadet .I learned to Drive on it , Plow snow, Cut Grass,Dig , Carry Hay , Spread Horse Manure ,pull Cars , you name it. One Rebuild and two Short blocks. I did sell it 20 + years later and wish I didn't. I hope to find another one someday.

@garybulwinkle82 Жыл бұрын

I have the Cub Cadet I learned to drive back in '69. My dad bought it to mow the grass on his property and I got it when he died. It's sitting in my garage, but the Craftsman tractor runs so much smoother and gets much better "mileage"! I even have the original manual!! I have too many tractors! I've got an old CAT D4 that needs a ring rear and reassembled (bought in partially taken apart). I sure would like to start on these projects, but I live next to thieves in Montana, and the law enforcement here is mediocre at its best; actually the corruption here is off the charts!!! My best friend id my side arm!!!!

@daveb3357 11 ай бұрын

Love seeing the rebuild of a great green machine. LOL I love watching you two. Aaron seems soo patient. I would love to be able to shadow him. You young lady are a keeper for sure. Grab your pork chop and just bite in to it right there in the shop was awesome to see. Good ol country gal. Ya'll have a great day.

@screamingmimi119 Жыл бұрын

This episode really sings to my heart. I recently became the trustee of a JD750, my dads name is also Ralph. ❤❤More tractor content please!!❤❤

@madmit2483 Жыл бұрын

What a score on that tractor 🚜. Aaron hit the nail right on the head. Who wants to have $25,000 tied up in a machine you're really not going to use that much. I would love to have a machine like that around my yard and only have four thousand tied up in it. You guys rock and you're both so fun to watch. I love all your content. The tractor content is awesome too. Nice to see Aaron showing his diesel mechanic skills. Can't wait for part 2!!!!!!!!!

@craiggoodwin9704 Жыл бұрын

Aaron and Emily, I've always wanted to rebuild a tractor motor. I don't have the skills that Aaron has, but I could give it a shot one day anyway. Really enjoyed this video. Kinda fun. Thanks for Sharing!

@gregritter377 Жыл бұрын

I’m enjoying watching you rebuild this John Deere two cylinder that’s quite a lap warmer. You have there. I like him. I’ve got a little 3 pound Chihuahua and he’s just a love.

@docthompson5344 Жыл бұрын

I curently overhauling a 3-179 out of s JD310 backhoe. This is a 3 cylinder engine and is a joy to work on, it very simple and fun because it one of easest ingines I hace ever worcked on. Have fun!

@JaKe-bd2fq Жыл бұрын

Have to agree, tractor content is great to to watch as well. We have a 1961 B414 and always great to watch tractor fun. Looking forward to see the fun you have with yours.

@nofotomojo Жыл бұрын

I think as long as its your project the content is great. Nice to see the innards of an engine and a few tips/tricks to go along with it.

@bertonfeuchtwanger9779 Жыл бұрын

Great find. You will be happy with that tractor and loader. That little two cylinder engine will sound vintage putt putt. That tractor was a joint venture between John Deere and Yanmar of Japan. There was a whole series, 650, 750, 850, 950, 1050, 1250, 1450 and 1650. I helped test these tractors back in the day and was always impressed. I also had a 650 like yours to travel around the factory in Waterloo. Good luck with your rebuild, I will be watching.

@BakerStudiosIndy Жыл бұрын

I resurrected a JD 750 a few years ago, the upgrade to the 650 you have. Both are rebranded Yanmars. Great tractors and easy to work on... And fun to use and own. Rock reliable, with a few caveats. The hydraulic pump is in the transaxle. When the pump fails, replacement or service requires splitting the tractor. Also, the seals in the "locking" valve erode over time and the 3-point will drop until the valve is replaced. But these things run for decades without issues. You got a great little tractor for the money.

@timmcqueer8460 Жыл бұрын

It seemed like Aaron always had an edge to him. I see in it guys I served with who had ptsd or were struggling with things. Since your break that seems to be gone. Best to you both!

@jpotopa Жыл бұрын

I love seeing different ways engine's are engineered. That center bearing was a first for me. Yes to more tractor vids. I'd love to see the case

@65LB Жыл бұрын

You two and your adventures, whatever they might be, are just plain fun to follow!

@jhiggz9258 Жыл бұрын

Tractors work fine for me. I'm a sailor and the more I know about diesels the better off I am. Also, love that natural smile!

@pauljenkins2501 Жыл бұрын

Hello from England. Thank you, you two, for another great video. Personally, I like to see any video where a non running vehicle gets brought back to life. Not taken back to showroom condition, but just turned from a static pile of scrap into a piece of working machinery once again. So I enjoyed this one greatly.....

@richardt3744 Жыл бұрын

I enjoy watching yall working on anything. It's the process that's interesting. Like how descriptive you guys are about everything.

@SuperDriver379 Жыл бұрын

I have a 650 2x4 I’ve used on the family farm since I was probably 9-10 years old. I’m 33 now. I use it all the time it’s a handy little tractor, we have 4 other much larger tractors up to 140 horse but still, we have the little Deere and man is it a handy little tractor to have.

@mittenstategarage9093 Жыл бұрын

More tractors, please!

@bobsmithsonrealtor Жыл бұрын

Great to see how well Aaron is doing. The arms look as if they are healing well and he looks happy to be back at work. It doesn't matter what you're working on if you are having fun! If it isn't fun, close the door and go do something else....it will be better tomorrow! Take care.

@dennisspottedwolf1019 Жыл бұрын

run across your page today and enjoyed the relaxed way in which y'all share what you know. I'm quite fond of old mechanicals regardless of brand etc. I have a '68 JD 140 with a single hydraulic. I replaced the ruined motor with a 15hp knockoff and I am quite pleased with the fit. Keep up the work videos.

@garyalford9394 Жыл бұрын

Good buy on the crank, rear main brg will be fine !

@johncundiff7075 Жыл бұрын

I just enjoy all the content you share with us!! You guys are real and genuine and I do appreciate all the time and effort you put into your channel!! Keep up the fantastic work!

@BlackSolstice07 Жыл бұрын

Phenomenal video. Aaron is in his element doing a diesel. He's like watching a potter working his clay. But to add some humor, did anyone else see Findley crawl out from under the house at 3:42? Watch over Emily's shoulder. 😂😂

@barrypurves4524 Жыл бұрын

I recollect from decades ago an "industrial arts" instructor advising a class of 20-25 senior apprentices......."each minute of stone hone operation is roughly equivalent to one year of engine operation"...... that is a remarkable testament to the efficiency of a micro film of lubricant betwixt the rings and cylinder wall at operating temperatures and pressures

@albertotovar8026 Жыл бұрын

I love this kind of content when yall rebuild engines it just brings me so much joy that there are still people out there keeping trade alive . And watching arons face when he doing what he loves is just pure greatness ❤❤

@jeffreyadams8811 Жыл бұрын

Great job !!! It’s amazing how small that engine is and can still do an amazing amount of work 🤠

@michaelmalloy7063 Жыл бұрын

Just amazed at Aaron's knowledge of engines!! Great job and enjoyed the contents of this video.

@user-nz5js8rx8e Жыл бұрын

you do a wonderful job , those bad comments are know it alls and do not know anything.thanks and keep up the good work

@AIRPORT-mc2ys Жыл бұрын

LIKE THE TRACTOR MADE IN JAPAN BY SHIBAURA

@TF856 Жыл бұрын

My dad had his own small excavation business when I was growing up. I got to run his equipment as soon as I could reach the peddles. He loved doing the backhoe work and I loved doing the rototilling work with his Massey Ferguson 60 hp tractor. I really wish I had my own tractor to this day to do that kind of work!

@amondavis Жыл бұрын

Thank you for showing us rebuilding a motor on a tractor and how it's supposed to be done I appreciate every bit of content that you guys put out on this channel it makes me happy to see a channel that shows the 1st kinds of different things In this world like tractor stuff boat stuff and even every bit from the car industry thank you and keep up the good hard work

@janhjorth965 Жыл бұрын

You two clearly managed a huge garage/shop clear out. That looks fantastic…..thumbs up to both of you….oh…an don’t worry abou content; we will view anything you can manage to post.