No video
Flysky FS-A8S Micro Receiver Review 👍👍👍
Рет қаралды 66,932
Күн бұрынFull review of this tiny micro Flysky receiver.
Spoiler alert.... it works really well!
You can get it here - goo.gl/Z6Zy6L
▼ RC Gear
Turnigy Evolution - goo.gl/xp5AGq
FrSky Taranis X9D Plus SE - goo.gl/N4PxtR
Fatshark Dominator V3 Goggles - goo.gl/ixDi1w
▼ Camera Gear
Sony RX100 Mark V - goo.gl/yaQvft
GoPro Hero Session 5 - goo.gl/4PA6Bn
Hawkeye Firefly 7S - goo.gl/v2NGCQ
RunCam 3 - goo.gl/SU0gtS
RunCam2 - goo.gl/QS3pzu
Xiaomi Yi Action Camera - goo.gl/u30TkK
Mobius Mini - goo.gl/L2oNNu
Samsung Galaxy Note 5 - goo.gl/1uOSFg
▼ My Video Drones
DJI Mavic Pro - goo.gl/ecxdZQ
Yuneec Breeze 4K Selfie Drone - goo.gl/3YhDwY
Hubsan H109S X4 Pro - goo.gl/FL4jss
What I use to edit my videos - amzn.to/1VJHWp7
SUBSCRIBE TO MY CHANNEL - goo.gl/b1cZZM
@john1945xxxxxx 7 жыл бұрын
Nothing like a actual live test to ensure it actually, fer shure, works as expected. Better than seeing your quad disappear over the horizon and wondering why. Thanks for all your wonderful videos. You do a great job, kiddo. John
@AlbertKimTV 7 жыл бұрын
I might do a follow up video and will be sure to show this is working.
@john1945xxxxxx 7 жыл бұрын
Thanks. You're a good egg (something my parents said, I think it means you're not rotten).
@2crashy545 7 жыл бұрын
Nice review. Not much of a range test but I guess you couldn't risk a failsafe beyond the park. I see why you love that little quad, it flies great!
@scottfirman 7 жыл бұрын
Yeah,not sure how they could add telemetry into something that small so that should have been obvious. I dont know the cost of it. I bought a bunch of the micro lemon receivers a year or so ago. They work as well as expected too and the price made it worth buying them. Some guys really dont get that you are not going to fly FPV beyond what your viewer transmitter and receiver is capable of so really range means nothing unless you like wondering where your mini quad went after your goggles went blank. Nothing disappointing about that. You did a good job presenting this and honestly,what more could you expect.
@sptrader6316 7 жыл бұрын
Great setup and test for failsafe working or not.. My ibus receiver worked like your example, my ppm receiver didn't.. I'll never use ppm again on any long range quad ...I always thought that the failsafe feature was solely dependent on the flight controller, not the receiver.... great to know....Ibus rules !
@AlbertKimTV 7 жыл бұрын
Thanks for watching!
@hollywood4u21 7 жыл бұрын
Awesome video brother! been waiting for a small rx to work with the Evolution. like the videos man keep them coming!
@AlbertKimTV 7 жыл бұрын
Thanks! I'm pretty much gonna stop using the Taranis for multirotors but keep it for my planes. The Evolution is just that good and for what I need it works great.
@amitkeynan922 7 жыл бұрын
Thank you so very very much, I thought that it's not binding... I almost gave up on it...!
@hawat1 7 жыл бұрын
The (very old) Flysky FS-A6 RX behaves the same way: No binding confirmation, no telemetry, no RX based failsafe. Not a big problem IMHO as you always setup FC based failsafe anyways. Plus the standard telemetry from the FS-IA6B only show the stabilized 5V supply voltage .. so really not that useful. The FS-A6 doesn't do PPM though and is about 3 times the size :-)
@jasoncross6151 7 жыл бұрын
At last a video that shows failsafe working on this receiver, I'm currently running PPM and had no luck so going to go over to sBus as per your instruction....thanks so much 👌🏼🚀😎
@AlbertKimTV 7 жыл бұрын
+Jason Cross try and rebind and switch the mode on the receiver per the user manual
@jasoncross6151 7 жыл бұрын
Do you know how to wire the sbus into a Airbot F4?
@jasoncross6151 7 жыл бұрын
Thanks Albert, good advise on the manual and pressing the button for 2 seconds to change from iBus to sBus, all works fine however when I cut power and reconnect I have to always press the bind button for 2 seconds on the receiver for it to respond??
@AlbertKimTV 7 жыл бұрын
Hmmm, that's a new one I haven't seen before... you might want to completely reset the model and rebind in the correct output mode and see if that fixes it.
@Clif_Brown 7 жыл бұрын
Hi Albert I have a Evo radio and love it. Looking for the smallest Rx and the FS-A8S fits the bill but did notice on HK "The FS-A8S is built for use in multi-rotor drones and is a 1-way receiver (no telemetry)"
@AlbertKimTV 7 жыл бұрын
Yes, it's one way but the only one this small. It's been working great for me. I have like 20 of these small receivers in various builds now.
@Clif_Brown 7 жыл бұрын
Thanks. Now if they could just stuff telemetry in that little Rx it would be perfect!
@AlbertKimTV 7 жыл бұрын
I bet one will be out in the next 6 months
@DLM517 3 жыл бұрын
Voltage to run the a8s, good review.@@AlbertKimTV
@WildCaptures 7 жыл бұрын
Thanks for sharing this micro rx. looks great👍
@juliobryan2285 6 жыл бұрын
Can i use this receiver for the plug an play emax babyhawk r. Thank you
@p.chuckmoralesesquire3965 7 жыл бұрын
thanks for the help man. i was messing with this for about an hour trying to get it to bind and freaking out
@simonwallace699 7 жыл бұрын
Looks great. I won't run it on carbon fibre quads though; it really needs dual diversity to be competitive with a LemonRX satellite. Carbon being a signal blocker and all...
@burgsenior 7 жыл бұрын
Awesome video as always ? I should of pre ordered them saved a few bucks but will be getting 2-3
@TheMadmacs 7 жыл бұрын
that tomoquad build looks amazing, bit expensive or me.
@johngraboski 7 жыл бұрын
8:36 with the music put a smile on my face. Nice touch, Albert. I'll have to look at the specs. I have iA6c on myx220. Now, I happen to have one of these A8s' lying around and with a Gt2 200 on the way i', not sure I should use it permanently. What flysky rx would you recommend on the gt2 200? I'm not interested in telemetry.
@awaisahmed6013 5 жыл бұрын
Every body makes video on binding prosses only.no body makes video on complete wiring connection of reciver and controller and escs.as you told in this video about binding only.can you make complete video how to wiring controler with escs also
@freddybanuelos9039 7 жыл бұрын
I just ordered one... super excited You were Abel to I use ibus with no problems ? I thought I seen on other channels where they say you can only use ppm or sbus. Thanks
@AlbertKimTV 7 жыл бұрын
+Freddy banuelos ibus no problem
@dannygaron 3 жыл бұрын
Haha.. Same thing happened to me. Didn't seem to bind , but it was. They should really have that in the instructions.
@adrianantones4909 7 жыл бұрын
hey kim does it also bind with FlySky T6 radio transmitter?? thanks!!
@AlbertKimTV 7 жыл бұрын
+Adrian Antones I don't know
@cheapskatefpv1903 7 жыл бұрын
hi i can bind receiver but when in cleanflight receiver tab doesn't do anything . eachine i6 controller f3 flight controller not evo .help help please
@AlbertKimTV 7 жыл бұрын
+craig jenkins most likely your output mode in the i6 doesn't match what's in Cleanflight. Also double check your connections to the flight controller and that the bind is true.
@pointeddown 6 жыл бұрын
Hey Albert, is this plug and play on the GTR90. I just got my GTR today and the connector is 4 pin but only has the 3 wires. I assume white is the signal. I am running a Qx7 with a multi-protocol module. thanks very much, always watch your videos and have learned a lot!
@AlbertKimTV 6 жыл бұрын
No, it's not PNP. You need to use UART6 instead if you use IBUS. If you use SBUS, it might work, but I've never tried it.
@CORINKERSTEN 6 жыл бұрын
I wonder if you can help me? i got this receiver for my drone set it up and it worked fine But then one day a few flights later it now just has a huge delay in the throttle low throttle works fine then it is all or nothing like a switch. anyway it is super weird and dont know what to do besides get a new kind. what receiver would you recommend for the AFDHS 2A thanks!!!
@AlbertKimTV 6 жыл бұрын
Are you sure it's the receiver? Have you tried another one to see if it behaves the same?
@CORINKERSTEN 6 жыл бұрын
my old receiver broke and i replaced it with this new one and now throttle is like a switch
@HumbleHeartMinistry 6 жыл бұрын
Have you tried the fsa8sv2 yet? I saw a range test between four flysky micro receivers and it did the best.
@victormooreracing 7 жыл бұрын
Hey Albert, did you end up ever shortening up the antenna on the fs-a8s receiver? What is proper way to do this? I'm currently running this on my tiny whoop and would like to cut down weight, but I can't imagine its okay to just snip the existing antenna to make it shorter.
@AlbertKimTV 7 жыл бұрын
You can watch my other video to see how to properly shorten it - kzfaq.info/get/bejne/e9Vdls-Ula7Inac.html
@victormooreracing 7 жыл бұрын
Thanks!
@MrBombom25 7 жыл бұрын
thanks that was very helpful 👍
@BumpierDrake960 7 жыл бұрын
So I got a couple of these RX's to try and I am having latency that I didn't have before using the stock RX. I maybe missing something in my setup but wondered if you have flown the stock RX the Evolution comes with vs the micro RX? Just wondering if it's just me...Love your videos. I too ditched the Taranis for the Evolution, since I only fly Multirotors I love it!
@AlbertKimTV 7 жыл бұрын
+BumpierDrake960 I'm not experiencing any latency. Are you using IBUS or PPM?
@kermets 6 жыл бұрын
please tell me why a range test of a 300m Rx was only tested to 100m ?
@AlbertKimTV 6 жыл бұрын
I would if I had a larger place to fly at.
@peterperry7626 7 жыл бұрын
Hi I have fitted flysky I range x receivers to my micro quads but concerned they don't have failsafe would this board be a good alternative thanks
@AlbertKimTV 7 жыл бұрын
If you setup this FS-A8S receiver properly, failsafe does work on IBUS and SBUS. It doesn't work on PPM however.
@Artie6937 6 жыл бұрын
My one doesn’t always disarm on the evolution, if there is a bit of throttle or on its side, any clue?
@AlbertKimTV 6 жыл бұрын
check your receiver channel extents in Betaflight
@AHTOH4uk1979 7 жыл бұрын
Please test maximum range on ground. Swap antenna to coaxial dipole and test it again.
@AlbertKimTV 7 жыл бұрын
What's a coaxial dipole and where would I get one?
@AHTOH4uk1979 7 жыл бұрын
this is suitable ru.aliexpress.com/item/2Pcs-150mm-2-4G-Receiver-Antenna-Aerial-3DB-w-Copper-Tube-IPX-Plug-for-Frsky-Series/32478684181.html?spm=2114.13010608.0.0.0I40bE
@pennywildone 7 жыл бұрын
hi guy these small receivers are they just for drones friends just bought one on bangood with transmitter for a plane .ive not come across this type before .iam old school receivers with 6 points to plug into servos throttle flaps etc
@takiparilimpossivel 7 жыл бұрын
I'm new to this hobby, so it might be a dumb question but how do you know the compatibility between receiver and transmitter?
@AlbertKimTV 7 жыл бұрын
They have to be from the same brand. FrSky, FlySky, and Spektrum are the big ones in use right now.
@takiparilimpossivel 7 жыл бұрын
Albert Kim ohhhh I see... thanks for the fast reply
@endoplasma 6 жыл бұрын
Thats a very nice micro quad you got there, any link to it?
@boz2awesome906 Жыл бұрын
I have the turnigy evolution, and FS82. When I bind the blue light on the rx goes from fast flashing blue to slow flash, and when I back out of binding screen the receiver light goes solid blue. Turn everything off and on, the rx blue light responds to the transmitter being turned on, but there is no output on the drone. When it starts up it beeps to signify calibrating the throttle limit, but fails to find the other side of the limit, as if there's no signal being transmitted. Any ideas?
@MrJolppy 7 жыл бұрын
show how you bind it and set it all up I have 3 drones and can't figure out how to hook it all up plus have it on betaflight
@Pomaufour 7 жыл бұрын
Thanks man, I had the same issue
@MrBombom25 7 жыл бұрын
I can't seem to get mine to turn on, it's bound but in cleanflight it doesn't recognize my transmitter
@AlbertKimTV 7 жыл бұрын
You probably don't have the correct protocol selected or you have the signal on the wrong UART. Double check your connections and make sure you are using the proper protocol.
@MrBombom25 7 жыл бұрын
Albert Kim OK
@MrBombom25 7 жыл бұрын
Albert Kim do I need to connect the yellow wire from the RX to the FC
@ChrisRiley3D-Everything 7 жыл бұрын
will the turnigy evolution work with the kingkong 130 fly egg ? thanks.
@stickboyfpv4742 7 жыл бұрын
I bought 2! What would you say the range is compared to the fs ia6b receiver? Thanks a lot!
@AlbertKimTV 7 жыл бұрын
about 300m. I flew it in this video - kzfaq.info/get/bejne/rbRnisaHyNqxqGg.html
@EngDrewman 7 жыл бұрын
Is there a way to permanently put this receiver in ibus mode so you don't have to push the bind button every time you turn it on?
@petertothRC-FPV 7 жыл бұрын
cool quad i just got an irange ir6x tx 10ch from bg looks like it came with the same rx rebranded clone dirt cheap. nice tx you have i did want that one but still learning my i6 having too much junk already was going to upgrade the firmware my tgy-i6 but dont want to screw it up.after 2 1/2 months my eachine v-tail finally came after changing the settings in cleanflight via seby`s video it flys well enough.i definately want to install this very small rx in my mini tricopter so far have only set up pwm so must learn this ppm ibus sbus keeps the wires minimal.as always good informative video.still much to learn.will this be good install on tricopter with an atom cc3d fc?
@benjien2007 7 жыл бұрын
Will this work on the flysky i6s
@AlbertKimTV 7 жыл бұрын
+joel ben yes
@benjien2007 7 жыл бұрын
thank you
@1australianbeacon 5 жыл бұрын
What sort of lipo battery are you using will a 3.7v lipo work. I am trying to fix a 2ch glider that pcb died
@AlbertKimTV 5 жыл бұрын
This rx needs 5v
@mikesmall6719 6 жыл бұрын
Hey Albert, is the fs-a8s compatible with 1s batteries? I saw that the required input voltage for the receiver was a minimum of 4v, I’m trying to build a custom 1s micro
@peterperry7626 7 жыл бұрын
Hmmm tried to set this up on my tarot 130 it bound to flysky i6 no problem but wouldn't show in betaflight no matter which port I tried and all settings yet ppm on tiny irange was no issue
@FPVPortugalTV 7 жыл бұрын
Binded mine fine but i cant get it to work on any protocol, PPM/ibus or Sbus none work... Its this un-inverted signal? Anything im missing? Thanks for the great reviews. This micro brushless quad is insane, i think i need one. :P
@AlbertKimTV 7 жыл бұрын
What transmitter are you binding it to?
@FPVPortugalTV 7 жыл бұрын
Albert Kim the i6X, the new Flysky Tx, the the stock receiver and the TGY-iA6C both work fine... :( I wanted to do a range test with the A8S, oh crap. :(
@bernardosanchotena 4 жыл бұрын
How far does the reception of the FS A8S? in approximate meters... Thanks!
@AlbertKimTV 4 жыл бұрын
About 200-300m in good conditions... 100m or less in bad conditions.
@tagurumoy1101 5 жыл бұрын
Just out of curiosity what is the purpose of the side terminal of a8s
@jurajkraus 5 жыл бұрын
Its PPM
@vincentb.1977 5 жыл бұрын
Hi i have a wizard x220hv with this receiver and i haven't the telemetry battery voltage of my quad on the screen do u know why? Thanks for help
@AlbertKimTV 5 жыл бұрын
This receiver doesn't send telemetry back
@vincentb.1977 5 жыл бұрын
damn I'm disgusted, anyway thank you very much for your quick answer it's really nice. you win a subscriber and a like ... good continuation and greetings from paris 😉
@AlbertKimTV 5 жыл бұрын
This flysky receiver will send telemetry back but it's a bit unclear on how to utilize the data - kzfaq.info/get/bejne/Z7eGkrqglbnDcok.html
@vincentb.1977 5 жыл бұрын
Ok Thanks i'll check this video, i know it's so important cauz i can see it on osd, but i found it strange not seeing it on my receiver...
@Aaronloganm 7 жыл бұрын
Hello, good video I have the same problem with the receiver I have the flysky i6s transmitter, you could give a little more detailed solution, greetings from Chicago
@AlbertKimTV 7 жыл бұрын
Can you describe the problem you are having in more detail?
@WCO3 7 жыл бұрын
I'm sold on the size!!..and I could care less about telemetry, but do you think it's got the range, of the fs-ia6b?
@AlbertKimTV 7 жыл бұрын
I think I will try a longer range test... need to find somewhere bigger to fly. Kinda hard where I live. Stay tuned!
@riversma 7 жыл бұрын
The specs say 300 meters without any ground interference
@riversma 7 жыл бұрын
For a device that small that is pretty impressive !!!!!!
@RCFlyer85 7 жыл бұрын
I wouldn't push it much past 100m unless your in absolutely interference free environment with the antenna in a good location on the craft
@juanfpv0881 7 жыл бұрын
how about the failsafe 0n that rx sir?
@AlbertKimTV 7 жыл бұрын
+Joli Nychill De Pedro it works in ibus and sbus modes
@juanfpv0881 7 жыл бұрын
Albert Kim thank you for that very informative review.☺
@charlieisgnarly 6 жыл бұрын
I cannot bind this to my Taranis , would the iRangeX 4 in 1 help this problem ?
@AlbertKimTV 6 жыл бұрын
Yes, you'll need the multiprotocol module to bind to flysky. Get the newer version of the 4-in-1 with the USB port. If you can't find it let me know.
@charlieisgnarly 6 жыл бұрын
Yes I have the new version with USB port and yellow PPM dial..
@fpvdreams8190 6 жыл бұрын
Hi Albert. Thanks for your tips. Unfortunately I’m having a”bad Rx” showing on my osd warnings. And my brand new babyhawk r won’t arm. It shows the input when I move my sticks so I’m bound but something is not right in my set up. I’m kind of new at this and don’t have all the answers. I’m running this receiver and set it upon ibus. Need some help. I know it’s a simple fix. I’m just not able to get going :( Maybe I can record a vid and post it on my channel. You can see my screens on Betaflight. Will that be helpful?
@AlbertKimTV 6 жыл бұрын
First read this page and see if it helps you... after that you should have more information about why it won't arm. Without that information I don't know where to start to help - github.com/betaflight/betaflight/wiki/Arming-Sequence-&-Safety
@fpvdreams8190 6 жыл бұрын
Albert Kim thank you. Like I said before it’s saying “ Bad RX “ In the github there is an explanation Saying receiver recover from failsafe and to turn arm switch off. What does this mean for me to do. How do I do that ? Can you walk me through it ? Thank you. I also just posted a video on my channel showing my set up with Betaflight. It would be much appreciated if you can help me figure this out.
@jbalatutube 7 жыл бұрын
looks like a good receiver but is there anything that small with the voltage feedback ?
@AlbertKimTV 7 жыл бұрын
Nothing I'm aware of. Perhaps the next revision will include more features.
@jbalatutube 7 жыл бұрын
have you had any luck with voltage monitoring using the supplied receiver ?
@AlbertKimTV 7 жыл бұрын
Yes. See this video - kzfaq.info/get/bejne/mbNziZyBrp26mWQ.html
@cheapskatefpv1903 7 жыл бұрын
I got receiver plugged in on sbus spek side of flight controller ppm on other side but eachine controller do not have ppm mode 😕
@TheMadmacs 7 жыл бұрын
great, i've been wanting to buy some of these but was worried about the failsafe, so it seems that the FC takes over failsafe duties? i've never used that option window to set failsafe before, i usually just select the drop option and set up my tx to failsafe...hopefully e can sort out the rssi... and on the cc3d too
@AlbertKimTV 7 жыл бұрын
The receiver does go into failsafe but I wanted to make sure it disarmed for sure so I set it up this way. It probably works the normal way as well but because of the strange binding I just wanted to be sure.
@BumpierDrake960 7 жыл бұрын
Using IBUS...I will try again.
@kastrifpv9299 7 жыл бұрын
Can I use it for a 220mm racing dron? regards
@AlbertKimTV 7 жыл бұрын
Yes, I have on the Diatone GT200
@volodymyryurovych7264 5 жыл бұрын
Albert Kim, how far you can fly with this reciver?
@randywetzler5976 3 жыл бұрын
Can this receiver be used without a flight controller? I have a skid type rover build with two ESC's and use mixing with a FS-i6 radio with a FS-iA6B receiver to run it. The two ESC servo leads plug into channel 1&2 of the iA6B receiver. Could this be accomplished using the FS-A8S? I see how it connects using a flight controller via IBUS but not sure how else it would work. I like the tiny size of it and would work better with my build.
@AlbertKimTV 3 жыл бұрын
So this is a super complicated question and difficult to answer here. You can switch the receiver into PPM mode and use a PPM to PWM converter to do what you want. I have a video on how I used one of those converters with a crossfire receiver but it's the same concept... you can watch the video here... kzfaq.info/get/bejne/irJzhbd83dnSk58.html
@angelfpv4825 6 жыл бұрын
Would you recommend this if i’ll put it with a 5inch racer?
@mrsanti3287 6 жыл бұрын
Hi. The signal output on the station as it is set for SBUS ?. Thank you
@troncho81 6 жыл бұрын
Hi Albert, is it possible to get the RSSI values to the betaflight OSD with this receiver...?
@AlbertKimTV 6 жыл бұрын
+Avi Harazi no... There's no telemetry coming back from the receiver with this one.
@troncho81 6 жыл бұрын
Albert Kim Thx! But😔... is there any other flysky micro receiver that can?
@AlbertKimTV 6 жыл бұрын
+Avi Harazi none in the micro class.
@SuperTHEHALOMAN 7 жыл бұрын
Can you make a video showing setup of failsafe on the evolution? For a quad
@AlbertKimTV 7 жыл бұрын
I already made that video... about half way through I think - kzfaq.info/get/bejne/n7Kjhrh_zbq4noU.html
@SuperTHEHALOMAN 7 жыл бұрын
+Albert Kim (marblekit) thanks! ;)
@AL-cf9jb 6 жыл бұрын
do you have a video of how to set up this reciever on a drone on beta flight
@AlbertKimTV 6 жыл бұрын
The setup will vary based on which FC you use. I believe there are already a lot of setup videos on this receiver. Try to find one where they use a similar FC to what you are using.
@AL-cf9jb 6 жыл бұрын
Im new to building drones and Im not quite sure what "FC" stands for dose it mean like sbus and ibus and ppm
@AlbertKimTV 6 жыл бұрын
FC means flight controller
@AL-cf9jb 6 жыл бұрын
i have the spracing f3
@ladamw1967 7 жыл бұрын
This micro receiver work with FS-T6 Transmitter ?¿
@AlbertKimTV 7 жыл бұрын
Does that transmitter work with the new 2A protocol? If it does, then it will work with this receiver. This receiver only does the 2A protocol and not the older one.
@ladamw1967 7 жыл бұрын
Ok, many thanks Albert. I'm afraid the protocol is different, it's a real pity.
@kerwinfernandes9583 7 жыл бұрын
Great Video!! :D
@Aganoify 7 жыл бұрын
Hello, thx for your Video! I hope i can find some help here... sry for my english, i just want to ask you guys if its possible to connect an turnigy on/off switch receiver to this FS A8S receiver to control leds on the radio. i dont have any of these material but i am about to order everything to build my quad, thats why i am interested to know if that is possible. i dont see any channel pins on the FS A8S like on the FS i6B but maybe there are solder possibilities and i cant find any pictures on the internet. Tank you very much for your time! Happy Flying
@adrianneandal7166 7 жыл бұрын
Will this work on a 1s battery? Planning to put it in a micro quad.
@danny_fpv 5 жыл бұрын
Can i use this receiver for Flysky Ct6b transmitter . Thanks
@107honda 7 жыл бұрын
Looks like Thousand Oaks
@kastrifpv9299 7 жыл бұрын
Friend sepude put a racing dron x220mm?
@volodymyryurovych7264 5 жыл бұрын
How far can you fly with this reciver?
@AlbertKimTV 5 жыл бұрын
depends on your RF environment.... anywhere from 100m to 300m typically.
@young.shredder2536 3 жыл бұрын
What IS that cable called That you can Plug inbetween the resiever and the FC??? (With the two pinns)
@AlbertKimTV 3 жыл бұрын
Not sure, but it came with the receiver and if you have the receiver, you should have it.
@kastrifpv9299 7 жыл бұрын
How far is that receiver?
@AlbertKimTV 7 жыл бұрын
300m range
@pilotgalau4614 4 жыл бұрын
Hello, how long can fly this micro Receiver?
@107honda 7 жыл бұрын
Will this work work with taranis x 9d plus?
@AlbertKimTV 7 жыл бұрын
+Russell Kegler no
@miguel-iyofpv6046 7 жыл бұрын
Hi, I have this receiver and I have interference problems. When I go to maximum gas I lose for 1 second the communication with my flysky i10. Have you had any problems of this type? I use motors t-motor f40 controller kiss, esc kiss, thank you.
@AlbertKimTV 7 жыл бұрын
Your PDB 5v regulator is probably too weak. In a low voltage situation like a big punchout, its not supplying 5v to the receiver. This is probably what is going on.
@miguel-iyofpv6046 7 жыл бұрын
Albert Kim Ok I will try to change pdb I use matek v3 and recently I have acquired the new version with osd thanks for your help. Like
@rubensenentsanchez3776 6 жыл бұрын
you can bind it with the fly sky fs-t6?
@garretts5416 6 жыл бұрын
Will this work with a fly sky i6s
@randylachman5273 7 жыл бұрын
soo small 👍🔥
@kastrifpv9299 7 жыл бұрын
How far away does this receiver have? Thank you
@AlbertKimTV 7 жыл бұрын
about 300m
@SteveWinnard 7 жыл бұрын
No telemetry as there is only 1 antenna. 1 to receive and the other to send... That's how I understand it.
@AlbertKimTV 7 жыл бұрын
My understanding is this is a "1-way" receiver only. The other receivers that have telemetry are "2-way" so this receiver is less capable. Probably had to do it to get it this small.
@SteveWinnard 7 жыл бұрын
Exactly :-)
@devjitpaul1191 6 жыл бұрын
will this work with flysky fsi6?
@AlbertKimTV 6 жыл бұрын
Yes
@babylonhobbiesandfpv4862 4 жыл бұрын
Will it work with fs i6s controller
@AlbertKimTV 4 жыл бұрын
Yes
@scottcooper8993 7 жыл бұрын
Would this be ok on a tiny whoop or even a qx95
@AlbertKimTV 7 жыл бұрын
Possibly. I would suggest shortening the antenna and getting rid of the connector and heatshrink. Basically, you gotta get the weight down as much as possible.
@mattress38 Жыл бұрын
Did you have to make changes in that transmitter to connect to the reciever, I also have the turnigy but have never really used it for anything other than simulator. I'm semi new to all this and I'm having troubles binding recievers to the jumper t lite. I've tried xm+ and radiolink r12dsm. And I'm pretty frustrated up to this point haha. I'm thinking about trying the flysky receiver with the turnigy or I also have the flysky fs-i6 I I got with another drone I bought years ago. Nice video and thanks for any info you can provide to me.
@AlbertKimTV Жыл бұрын
Your issue is really strange. Sounds like you need to update firmware on your transmitter but that's just a guess.
@mattress38 Жыл бұрын
@@AlbertKimTV maybe I will try that, thanks
@timlangley5387 7 жыл бұрын
I am building a 5 inch quad and cant fit a normal receiver, how do you think this will perform compared to a full size receiver with dual antennas?
@AlbertKimTV 7 жыл бұрын
+Tim langley it has less range and if your antenna placement is poor you can get failsafes.
@timlangley5387 7 жыл бұрын
I went ahead and bought one, I think I will look for a longer antenna that might help a little bit.
@p.chuckmoralesesquire3965 7 жыл бұрын
what is that battery pack you are using to power the flight controller ?
@AlbertKimTV 7 жыл бұрын
It's 4 AA NiMH batteries
@p.chuckmoralesesquire3965 7 жыл бұрын
ah nice, so 6v is close enough to 5 that it works ?
@AlbertKimTV 7 жыл бұрын
rechargeable AA have a slightly lower voltage so mine is just about perfect at 5v.
@aaronwilliams6616 7 жыл бұрын
Hey man, nice vid. My receiver is bound up, but not showing anything in CF. Serial uart port is checked, and checked the rx Serial and I bus in the receiver tab. Using the eachine i6 and the diatonic naze3 Rev 6, any ideas?
@AlbertKimTV 7 жыл бұрын
+Aaron Williams Could be a lot of things. I dont have enough information to provide a diagnosis. I'd double check all your connections and make sure you didnt mix up TX and RX on the UART
@aaronwilliams6616 7 жыл бұрын
Albert Kim it should be in the urx right?
@aaronwilliams6616 7 жыл бұрын
Did you put your a8s in the youbi? As trying to put it in a different quad but now I'm gona try to put it in the youbi
@AlbertKimTV 7 жыл бұрын
+Aaron Williams yes its in the youbi
@aaronwilliams6616 7 жыл бұрын
Oh OK nice, did you use the provided sbus connection wire harness provided to set it up ibus?
@bmoreking443 7 жыл бұрын
Albert, Will this work with a flysky fs-t6 ?
@AlbertKimTV 7 жыл бұрын
I don't know. Does that radio speak the 2nd gen 2A protocol? That's that this receiver is compatible with. It's not compatible with 1st gen.
@blueski4326 7 жыл бұрын
Mr. Albert can it go on a brushed flight controller
@blueski4326 7 жыл бұрын
An if so can you do a video on it. Love your channel man
@AlbertKimTV 7 жыл бұрын
Yes, and I put it on a 2S brushed quad. The Coretex Tiny 115. Build video will be out on Monday.
@Zillawill 7 жыл бұрын
Just to confirm it worked on 1S fine?
@AlbertKimTV 7 жыл бұрын
I did not put it on a 1S brushed. It was a 2S brushed. However, it was the same F3 board I run my 1S brushed on and it is powered by 5V on the UART. The board has a step-up/down regulator to provide 5v to the receiver.
@Zillawill 7 жыл бұрын
Thanks man, when I bought radio didn't know it didn't work with older protocol
@john1945xxxxxx 7 жыл бұрын
Do you know if this thing will work with my FlySky FS-I6?
@AlbertKimTV 7 жыл бұрын
Sorry, I don't have that radio, however, I suspect it should work just fine since the i6 is compatible with the 2A protocol that this receiver bind with.
@RCFlyer85 7 жыл бұрын
john1945xxxxxx Yes it will
@john1945xxxxxx 7 жыл бұрын
I just ordered 2 of them.
@a1maxxx 7 жыл бұрын
heloww, this working when 1s lipo ?
@AlbertKimTV 7 жыл бұрын
no. needs 5v
@tkdzeek 7 жыл бұрын
FS-A8S has known brownout and signal drop issues! Tons of crashes. Version 2 has not fixed it. www.rcgroups.com/forums/showthread.php?2792377-FS-A8S-help
@TheJeremyw16 7 жыл бұрын
Thanks for the great videos! I really want to get that evolution controller but I want to use it for my tiny whoop too... I see that eachine is releasing a Flysky version of the beecore fc for the E010/tiny whoop... Any idea if the evolution might bind with that as well? Here's the link:m.banggood.com/Beecore-F3_EVO_Brushed-ACRO-Flight-Control-Board-DSM2-For-Inductrix-Tiny-Whoop-Eachine-E010-pnew-1089021.html
@AlbertKimTV 7 жыл бұрын
+Jeremy Wilson That one doesnt work with the Evolution unfortunately
@TheJeremyw16 7 жыл бұрын
Albert Kim wow thanks for the quick response! Have you seen or heard of anything promising coming out for a tiny whoop sized quad you can control with the evolution Tx ? That controller just seems great to me...
@AlbertKimTV 7 жыл бұрын
+Jeremy Wilson I will be doing a conversion of the Furibee F90 soon. Videos coming soon.
@lahawtho 7 жыл бұрын
Albert Kim, Is there a Tiny Whoop that someone that has built that is compatible with the Turnigy Evolution? (Meaning the tiny whoop accepts the AFHDS 2A Protocol) Maybe someone has stepped up voltage to use this receiver?? Anyone mounted a Eachine AIOF3_Brushed flight controller/reciever to a tiny whoop? (Link Below) bit.ly/2i33sXE
@AlbertKimTV 7 жыл бұрын
I'm not aware of any. Also, that AIO board is much too large for a Tiny Whoop frame. Hopefully, they will come up with a V2 version of the BeeCore F3 that will work with the 2A protocol soon.
@sabeamixtades6658 7 жыл бұрын
Hi Albert! One question, I want to connect this receiver to f3 osd of other video ( kzfaq.info/get/bejne/oK1in5eYx9TWj3k.html ) I want to connect for ibus...where I should connect the receiver in fc?? io2? io2c (uart2)?? This receiver works with 5v and f3 too wright??
@AlbertKimTV 7 жыл бұрын
Use IO_2, serial-RX CH3 pin and 5V. Yes, it will work. Also, I believe that UART is UART3, not 2.
@sabeamixtades6658 7 жыл бұрын
thank you so much!
@sabeamixtades6658 7 жыл бұрын
Other thing...I want connect my fpv to the same flight controller. Them, I connect vin and vout to fc. But my camera and transmitter only have one ground. I conect the ground cable to fc ground or to pdb ground?? The osd information of flight controller is given for vin/vout pins directly to transmitter wright??
@AlbertKimTV 7 жыл бұрын
ground is the same everywhere. Just pick something on the FC, it should be fine. VIN is from the camera, and VOUT goes to the VTX.
@sabeamixtades6658 7 жыл бұрын
Thank you so much!!! Follower and fan forever ;)
@AndrewMcClenaghan4182 7 жыл бұрын
No telemetry :( or diversity
@AlbertKimTV 7 жыл бұрын
True on both, but I think it works great and does what I need. Telemetry is nice but not required for my purposes.
@lucky1968 7 жыл бұрын
s bus. work
@RCFlyer85 7 жыл бұрын
Erik Haugland Yes
@lucky1968 7 жыл бұрын
thanks :-)
@AlbertKimTV 7 жыл бұрын
Yes, but I recommend you use IBUS instead. It works better than SBUS on the Flysky setup.
@AndrewMcClenaghan4182 7 жыл бұрын
How is iBUS better?
@AlbertKimTV 7 жыл бұрын
It's the native digital protocol that Flysky developed and not a copy of SBUS which is found in Futaba and Frysky. There is less jitter in the signal. I'll have a video later showing the differences.