Awesome Brian and Ms. Brian!!! I just received the 1400mm and it's a well finished airplane for the MONEY!!

Awesome little plane. I'm about to put mine together.

thanks for the content, was on the fence about getting into the hobby until watching some of your videos on safe trainer planes.

Your videos are the absolute best. I thank both you and your wife for what yall do. Yall have helped me make so many decisions on which planes to get. Also, What Transmitter would you highly recommend? I'm trying to get a better one seeing that my DX6E won't let me use thrust reverse on the T-28.

AH, Brian...Bob Ross got nothin on you

🎉

NIIIICE 👌

Great video Brian and Camera Crew! Brian, if you use the AR410, how would you get the gyro to work? I thought you have to connect the sbus/ppm to a channel, which means you need 5 physical channels.

Another Awesome video! Christmas tree?

Hi Brian just watching you glue the elevator on but should the paint be removed on surfaces to ahiev securely cheers Rick

I just saw your new video about upgrading to an NX10. So, How about donating a transmitter to a brother; if you do, please sign it; it would mean so much. My DX6E won't allow me to use thrust reverse on my T-28.

hey brian i have the nx8 i found a way to have the voice tell me how much time remaining at a push of the panic button.........go to audio events... click switch changes.........add new sound.... the click panic button.... the on the sounds menu choose time remaining exit exit then when you press the panic/bind button the sweet english lady will tell you time remaining. Not sure you knew this. plus i turned of the annoying beep on the scroll thing cause when your setting thigs up its very annoying

Hi Brian, I have an AR600 and a AR630, can either one be used for the Corsair and if so which one do you suggest. This is my first FMS so it is a little bit of a learning curve for me. Thanks, Dean

Hello buddy

Put a towel under the cowl and support the tail off the counter top.

Very cool setting up the F-mode to display and speak the Stability Control. I did just as you did only using my switch G because on mine the factory Reflex V2 is a 3-way switch mode (stab on, Off, optimized/self-leveling. It worked perfectly just as you showed but now...HELP me, please. How do I keep this and add to it...Throttle Cut so that the NX8 displays and speaks (Throttle Cut, and or something like Motor On, etc.). I tried doing it in FlightMode for Switch 2 in the setup and toggling the A switch and going through the setup but somehow I did something wrong because all I ended up doing was overriding my Switch G position 0 to now say and display Throttle Cut. lol. Please assist or send me a link if you have gone over this before. I am surprised the NX transmitters don't automatically just have a box check or uncheck the option to speak the command next to the main menus (such as Throttle Cut).

Hi friend! I love the Fms F4u Corsair plane...is it possible to fly it with 1 flysky transmitter and receiver? Greetings friend

😀😀😀😀😀😀

does this come with a remote in the box or do i need to buy it

Christmas Tree?.....I hope this was filmed Months ago.🎅🤶🎄

Do you have an FAA license to fly this toy?

Mine was missing so many parts

Why not empty your nut sack onto a white plate? It’ll prevent you losing the screws on your camouflage work tops. The detail on that model is awesome, especially for the size. Thanks for all your hard work to put out so many quality, informative and entertaining videos. 👍🛩

Lemon rx is a trash receiver I have two and both lost signal while flying multiple times