Focus XR5 / RS mk2 / ST225 AC compressor repair. Step by step by OEM Denied Performance

Рет қаралды 8,510

3 жыл бұрын

Common fault with air con in the mk2 Focus XR5/RS/ST225 is that is blows cold for first few mins then blows hot air after that.
Before replacing AC compressor try removing a shim first!
Step by step by OEM Denied Performance

Пікірлер: 30

@shamiel00 2 жыл бұрын

Great video. Had all the symptoms you mentioned. Gave it a go today and removed shim and ac works like a dream. Thanks alot for this informative video

@dungareesareforfools 11 ай бұрын

You just saved me several hundred pounds! The AC on my car has never been right, I've asked about 3 "specialists" to look at it over the years, the most recent one after it stopped working almost completely, insisted that it just needed the old gas removing and replacing. He even spotted that the clutch was "sticking", needless to say he didn't fix it. I was ready to order a new compressor until I found this. Thanks!

@haloharry97 11 ай бұрын

That sounds like what I have been going throw, I just about to order a new compressor, am going to give this ago in a few days to see if it works,.

@terryaustin1422 2 жыл бұрын

Jamie thank you for these in depth tutorials have just completed this on the better half's 2006 xr5 as she has MS and the heat was really knocking her around took the car for a long test drive ice cold aircon like a dream seriously thank you really really appreciate these videos

@OEMDeniedPerformance 2 жыл бұрын

most welcome mate, glad to be of help :)

@craigtaylor5391 3 жыл бұрын

I have had numerous tests done and vacuum/recharges due to this happening and driving me nuts was about to spend a fortune on all new parts, going to give this a go first thanks for sharing

@craigtaylor5391 3 жыл бұрын

Pin this comment followed your video to a t and i now have working ac all day long 👍🏻👍🏻👍🏻

@sambarrett1993 3 жыл бұрын

Thanks, my car has just started doing this!

@raduandreiv888 2 жыл бұрын

Awesome! thank you for this video, will perform this operation myself!

@royevans4581 Жыл бұрын

Coolest vid so far 🤣 Sorry I'll get me coat.....

@laurb95 3 жыл бұрын

Thanks!

@davidspring9719 3 жыл бұрын

Thanks, it works :)

@OEMDeniedPerformance 3 жыл бұрын

Glad to have helped!

@justinhanna584 3 жыл бұрын

Hey Jamie I have a question for stage 4 is the crackle map the Same as all the other ones

@AlanXR6 3 жыл бұрын

Great video Jamie! The AC on my XR5 seems to spend more time cycled off than cycled on ... it seems to blow cool enough when it's actually engaged ... and I'd like it to stay engaged and keep blowing cold. Would it be worthwhile putting a bit of Kopr-Kote on the splines before reassembly?

@OEMDeniedPerformance 3 жыл бұрын

Kopr-Kote isnt going to hurt it so long as only on the splines.

@essexlad860 Жыл бұрын

Could this stop the AC from working at all recharged it fine press AC button light comes on but compressor doesn't engage at all?

@troy45uk 3 жыл бұрын

My AC hasn’t worked for a while now, does seem to work at first but then just blows what I assume is outside air. I did test the system last year with an STP AC pressure test gauge thinking it had lost gas but gauge suggested it had ok or actually high pressure. Does that sound similar symptoms to what you’ve fixed here? It’s on a UK ST so you can see how I don’t miss the cold air on for most of the year 🙄

@OEMDeniedPerformance 3 жыл бұрын

yeah sounds about right mate. But be aware the car switches AC off under full throttle operation so if its doing it whilst at cruising speed well worth giving the shim removal a whirl.

@troy45uk 3 жыл бұрын

@@OEMDeniedPerformance it rarely gets full throttle, goes quick enough without having to do that 😉 so it could well benefit from taking a shim out - I’m going to get a puller sorted and give it a go. Massive thanks for putting this fix up 👍

@steveothedeveo 4 ай бұрын

My xr5 blows cold air then warm air intermittently. Maybe 15secs of cold air followed by 10 secs of warm air. It continues this pattern.. Could that be the start of the issues in this vid or something else entirely?

@OEMDeniedPerformance 4 ай бұрын

sounds like the start of the clutch slipping to me

@craigtaylor5391 3 жыл бұрын

Could i please pick your brains? Had a new rs clutch kit including flywheel fitted last year, it sound like i have flywheel rattle at idle but if i rev it i get what sounds like a rod knock, BUT knocking goes away when clutch i pressed, ever come across it before i tear it down

@OEMDeniedPerformance 3 жыл бұрын

was deff and RS clutch kit with DMF not a SMF setup? If SMF setup noise is normal, if DMF then id be inclined to say flywheel is faulty (should have been replaced when clutch was done) or something isnt quite tight like the CSC bolt or a flywheel bolt

@craigtaylor5391 3 жыл бұрын

@@OEMDeniedPerformance definitely a rs clutch including a new dmf, looks like a day on my back again 😂 thank you for replying much appreciated

@mrhuss4939 3 ай бұрын

I tried doing this but it seems the ac clutch on mine is seized in there Any advice? Thanks

@OEMDeniedPerformance 3 ай бұрын

need to make sure that the center bolt youve refitted isnt threaded all the way in otherwise the clutch cant slide off the splines because the head of the bolt will stop it

@mrhuss4939 3 ай бұрын

@@OEMDeniedPerformance thanks i tried that, it seems its seized so i left some penetrating wd40 so will try again tomorrow