Focus XR5 / RS mk2 / ST225 Torque mount install guide. Step by step by OEM Denied Performance

Рет қаралды 5,185

3 жыл бұрын

Quick run down on how to replace the torque mount on a Focus RS mk2/XR5 Turbo/ST225.
Step by step by OEM Denied Performance
Torque mount available from:
focusonperformance.com.au/oem...

Пікірлер: 14

@Bennyy7 3 жыл бұрын

very helpful vid got the torque mount installed easy peasy! Cheers

@mrpageee7708 3 жыл бұрын

I’m new here mate love the vids in from the uk and have a Mk2 facelift mountune and your videos are helpful , is this your own person car ?

@OEMDeniedPerformance 3 жыл бұрын

In this video yes it is. Some are shot on customer cars though as dont get much time to work on our own!

@johnmelling9950 2 жыл бұрын

Great vid. Is there a rubber bush in the bracket bolted to the gearbox that the long bolt goes through that can wear?

@OEMDeniedPerformance 2 жыл бұрын

yes there is mate. Watch this video: kzfaq.info/get/bejne/Z9yaZZSVvcnPk6M.html

@johnmelling9950 2 жыл бұрын

@@OEMDeniedPerformance Great, Thank you

@TomS-mo1ox Жыл бұрын

Great vid. Is there a bush on the mount ? I ask as I have a hardrace one and wondered if the bush can be replaced or the whole mount replaced.

@OEMDeniedPerformance Жыл бұрын

have to replace the whole mount with hard race as its part of it

@Brutile94 10 ай бұрын

I’m getting heavy vibration after replacing all the mounts, but only below 1k revs (i.e. at idle). Is this normal for new mounts or could this be an issue with engine alignment?

@5cbst 10 ай бұрын

If all of your mounts are in good order, It could be an issue with your motor. Check for misfires.

@madmac5651 2 жыл бұрын

The clunking noise could that be when changing gears mostly in 1,2 and 3 sounds like its under the center

@OEMDeniedPerformance 2 жыл бұрын

check it using a lever bar like the beginning of the video mate

@Andy21979 3 жыл бұрын

Hallo, paßt das auch beim Mondeo mk4 2.5t 220ps? Würde das auch gern einbauen ist bei mir nicht vorhanden!

@OEMDeniedPerformance 3 жыл бұрын

Nein, tut mir leid, es passt nicht. Sie können jedoch eine verbesserte Buchse für einen Volvo S80 kaufen, der zum Mondeo 2.5T passt. Der Versand würde Sie viel kosten, da wir in Australien sind, aber Powerflex in Großbritannien wird nach Deutschland versenden. Powerflex-Teilenummern PFF88-1030 für oben und PFF19-1925 für unten :)