No video

FOLDFORMING PART 6. "USING FOLDFORMING IN YOUR JEWELRY DESIGNS"

  Рет қаралды 6,964

Greg Greenwood

Greg Greenwood

2 жыл бұрын

PART 6. Get ideas for your jewelry projects with Designer Craftsman Jeweler, Greg Greenwood.
Greg has taken 17 demonstration examples from the entire Foldforming Series and has made them into pieces of jewelry. Lots of ideas for you! He also demonstrates the process of taking a copper air pierced example and combines it with foldformed silver leaves and silver wires, to make a pendant.
You will definately get crative ideas for your own projects by watching this video! Check out the entire Foldforming Series.

Пікірлер: 47
@interludo
@interludo 21 күн бұрын
These series are a gem. Very grateful for your legacy. Peace
@greggreenwood4628
@greggreenwood4628 20 күн бұрын
Hello Interludo, Thank you for your kind comments. Keep watching. Greg Greenwood
@angelaab1892
@angelaab1892 2 ай бұрын
I love your channel, the most comprehensive ❤
@greggreenwood4628
@greggreenwood4628 2 ай бұрын
Hello Angela, Thank you for your kind comment. Keep watching. Greg Greenwood
@Frigger20
@Frigger20 2 жыл бұрын
Whow Greg, those are GORGEOUS !!!! Thank you ! My head is spinning with all the things I will make !!
@greggreenwood4628
@greggreenwood4628 2 жыл бұрын
Hello Anne-Marie, Thank you so much. Glad you are getting good vibes and ideas!!! Greg Greenwood
@customcraft1
@customcraft1 Жыл бұрын
Outstanding !!!
@greggreenwood4628
@greggreenwood4628 Жыл бұрын
Hello Bob, Thank you for your great comment. I really appreciate it. Glad you enjoyed. Keep watching. Greg Greenwood
@dienkko
@dienkko 2 жыл бұрын
Thank you mr. Greenwood
@greggreenwood4628
@greggreenwood4628 2 жыл бұрын
Hello Dienkko, You are more than welcome. Greg Greenwood
@merilynl.3907
@merilynl.3907 Жыл бұрын
Wow and Wow Greg!!!!!What beautiful pendants!!! I love the creativity and the classyiness. Thank you ML
@greggreenwood4628
@greggreenwood4628 Жыл бұрын
Hello Merilyn, Thank you so much for your kind comments. I appreciate it. Greg Greenwood
@FranconiaFriend
@FranconiaFriend 11 ай бұрын
Thanks for this series. I was introduced to fold forming in a class I took at an art center, and subsequent study. Your videos are very clear with great explanations with many interesting techniques. The vise mod is very helpful, almost have mine done. P.S. I have a 35 lb Cliff Carrol anvil that looks similar to the one you are using in the videos. Seems to work well for this application.
@greggreenwood4628
@greggreenwood4628 11 ай бұрын
Hello Franconia, Thank you for your kind comments. I appreciate it. You will love the vise mod. It is the only way to go. Yes, I have a 35 lb. Cliff Carrol anvil. I have had it for about 40 years. It is a great anvil. Let me know how you are doing. If you have any questions and need to send pics, I have my email address in the "about" section of my channel. Have a good one. Greg Greenwood
@donobototron
@donobototron 2 жыл бұрын
enjoyed watching you make this pendant. nice job.
@greggreenwood4628
@greggreenwood4628 2 жыл бұрын
Hello David and Laura, Glad you enjoyed the video. Have a good one. Greg Greenwood
@jessiekml
@jessiekml Жыл бұрын
Hi Greg, I have to say that your energy is very infectious! I have loved watching your fold forming videos and will try the techniques outs. Thanks so much for sharing your gift. Much appreciated!
@greggreenwood4628
@greggreenwood4628 Жыл бұрын
Hello jissiekml, Awesome, thank you! Fold forming is a very exciting process. Have fun and thank you for sharing. Greg Greenwood
@WalkNancy
@WalkNancy 2 жыл бұрын
great ideas! thank you so much!
@greggreenwood4628
@greggreenwood4628 2 жыл бұрын
Hello Nancy. Glad you like them! Thank you for watching. Greg Greenwood
@frogfairy1163
@frogfairy1163 2 жыл бұрын
There really are some beautiful pieces among the pieces you made. The round one with the silver wire with balls on the end and the 3 boatfold one being my favorites. They have a beautiful flower feel to them. I would definifely wear them. Such a shame that hammering that much in an appartement building isn't really neighbour friendly. I like my Neighbours and visa versa so i prefer to keep it that way. But this video sure is inspiring. 👍
@greggreenwood4628
@greggreenwood4628 2 жыл бұрын
Hello Frogfairy, Thank you very much for your nice comments. I really appreciate it. Glad you have some favorites. You are correct about forging in an apartment. Thanks again. Keep watching! Greg Greenwood
@alicerosa6766
@alicerosa6766 2 жыл бұрын
Beautiful artwork!. Thank you for sharing your videos😊👍.
@greggreenwood4628
@greggreenwood4628 2 жыл бұрын
Hello Alice, Thank you so much, I appreciate it. Enjoy. Greg Greenwood
@Jose.Alejandro
@Jose.Alejandro Жыл бұрын
Muchas gracias Greg por compartir tus conocimientos! Saludos desde Chile!
@greggreenwood4628
@greggreenwood4628 Жыл бұрын
Jose, De nada. Estoy feliz de compartir conocimientos contigo. Gracias por avisarme que eres de Chile. ¡Sigue mirando! Greg Greenwood
@rickstrodder129
@rickstrodder129 2 жыл бұрын
Hey Greg. All of this series was totally fascinating. I just loved it. I can't wait to get started... inspiring! Thanks for making these awesome movies.
@greggreenwood4628
@greggreenwood4628 2 жыл бұрын
Hello Rick. Thank you for your great comments. I appreciate it. Have fun and if you have any questions, please feel free to let me know. Greg Greenwood
@rickstrodder129
@rickstrodder129 2 жыл бұрын
@@greggreenwood4628 hey Greg... well, as you offered.... I guess it'll works equally well with silver as long as there's plenty of annealing? Having said that.. you get such awesome colours with copper.... mixing both might be spectacular......
@greggreenwood4628
@greggreenwood4628 2 жыл бұрын
Hello Rick, Sorry for the delay in replying. Yes, you can use silver too. Definitely annealing is a must. Mixing metals and colors is always fun and gives jewelry pieces a special look. Go for it!!!! Thanks again for your comments. Greg Greenwood
@jadeplympton9119
@jadeplympton9119 Жыл бұрын
Hello Greg, I absolutely love watching your videos, I'm learning so much. You said your vise is handmade if I remember correctly, I have been looking at buying a vise to do some of the foldforming and I can't find anything large enough to make a cuff. Any suggestions would be greatly appreciated 🙂
@greggreenwood4628
@greggreenwood4628 Жыл бұрын
Hello Jade, I am glad you are enjoying and learning from my videos. Rewatch Part 1 of the Foldforming series. I have "modified" my vice with angle irons. I replaced the textured jaws with the angle irons. This way you can fit cuffs etc in the jaws. You can buy almost any kind of vice from a box store or hardware store. They can by cheaper brand if that fits your budget. Just make sure that you can remove the textured jaws. Please let me know how it goes. Greg Greenwood
@keys61
@keys61 Жыл бұрын
Hi Greg, love the tutorials. Would you be able to tell me what fi ish you put on the copper to keep it from tarnishing
@greggreenwood4628
@greggreenwood4628 Жыл бұрын
Hello keys61, I am glad that you are watching my tutorials. Thank you. Copper is difficult to keep a finish on it. I use clear lacquer and that works ok. Thank you for asking. I am here to help when I can. Greg Greenwood
@mustardforall
@mustardforall Жыл бұрын
So beautiful- Can you please tell me what gauge is used for the silver leaves? And what gauge of copper For the final project? Thank you
@greggreenwood4628
@greggreenwood4628 Жыл бұрын
Hello Renee, Thank you for your kind comment. The gauge for the silver is: 26gauge / .405mm. The copper is 26 gauge also, .405mm. Thanks for your question. Keep watching. Greg Greenwood
@Susannevoges
@Susannevoges Жыл бұрын
Hi Greg, thanks for your fantastic and really helpful videos. I'd really like to know how the tool is called you're using at minute 11:22. I understand "steak", but that might not be correct :-) Would be glad to hear from you. Have fun
@greggreenwood4628
@greggreenwood4628 Жыл бұрын
Hello Susanne, Thank you for your nice comments. The stake you are talking about is an "Eid Longhi Anticlastic Forming Stake" It is a multi purpose forming stake to make anticlastic curves (Metal curved in opposite ways in two directions). Make from a plastic type material "Delrin". Great stake for bending metal over in many different curves. Thanks for asking. Greg Greenwood
@Susannevoges
@Susannevoges Жыл бұрын
@@greggreenwood4628 Thanks a lot for your answer,, Greg. And I have another question, I really would appreciate it if you could comment that too: How thick is the steel you are using for the construction on your vice ? Do you think that 3 mm would be strong enough for hammering the metal sheets ? Best wishes, Susanne
@greggreenwood4628
@greggreenwood4628 Жыл бұрын
Hello Susanne, 3mm should be fine. Mine is a little thicker. Go for it!!! Greg Greenwood
@jaynewman3388
@jaynewman3388 2 жыл бұрын
I have a question regarding putting a bezel around a glass eye so it will look like a natural lid top and bottom. Any ideas would be appreciated.
@greggreenwood4628
@greggreenwood4628 2 жыл бұрын
Hello Jay, I will get back to you about the lids soon. I want to go into detail with you. Talk to you later . Greg Greenwood
@greggreenwood4628
@greggreenwood4628 2 жыл бұрын
Hello Jay, Sorry for the delay in responding. I would dome a circle of silver using a dapping block, forming around a steel ball, or forming over a stake. Then you could cut the dome in two pieces to make two eye lids. You could solder the lids to an other dome or back sheet. Decorate as you wish. Sounds like a fun project. Let me know how it goes. I hope this has helped you. Greg Greenwood
@jaynewman3388
@jaynewman3388 2 жыл бұрын
Hi Greg! That is a great idea, Thank you so much and keep up the great work. I’ll let you know how it works out!
@greggreenwood4628
@greggreenwood4628 2 жыл бұрын
Looking forward to it. Greg Greenwood
@mohammadtashayoi1132
@mohammadtashayoi1132 2 жыл бұрын
Hello, I use Google Translate. I had a question. When I melt the silver, after casting and cooling, I saw dark spots on it. What is the cause? What is the solution? Thank you.
@greggreenwood4628
@greggreenwood4628 2 жыл бұрын
Hello Mohammad, The dark spots are copper oxide. They are caused by the silver mixing with the oxygen in the air producing copper oxide. They can be removed by "pickling" in a mild acid solution. See my video "What is Pickle? This will give you several options of acid. I hope this helps you. Thank you for watching. (Google translate is very helpful.) Greg Greenwood
FOLDFORMING PART 1.  "LINE FOLDS"
17:29
Greg Greenwood
Рет қаралды 16 М.
LOW TECH POLISHING TECHNIQUES
16:47
Greg Greenwood
Рет қаралды 12 М.
World’s Largest Jello Pool
01:00
Mark Rober
Рет қаралды 100 МЛН
Summer shower by Secret Vlog
00:17
Secret Vlog
Рет қаралды 13 МЛН
Alex hid in the closet #shorts
00:14
Mihdens
Рет қаралды 16 МЛН
JEWELRY DESIGNS FROM NATURE:  PART 1
14:38
Greg Greenwood
Рет қаралды 5 М.
UNEVEN CABOCHON STONE SIDEWALLS?
9:10
Greg Greenwood
Рет қаралды 10 М.
UNDERSTANDING FIRESCALE
13:33
Greg Greenwood
Рет қаралды 15 М.
Cool Tools | Introduction to Foldforming by Robert Dancik
26:23
Cool Tools Videos
Рет қаралды 410 М.
JEWELRY BUFFS AND COMPOUNDS. WHICH SHOULD I USE?
9:13
Greg Greenwood
Рет қаралды 13 М.
Dapped Copper Earrings
21:23
Fire Mountain Gems and Beads
Рет қаралды 16 М.
SILVER SOLDERING HIDDEN DETAILS
19:22
Greg Greenwood
Рет қаралды 110 М.
TOP 5 SILVER SOLDER PLACEMENT METHODS
11:01
Greg Greenwood
Рет қаралды 8 М.
Gallery wire as a bezel: Studio vlog tutorial with a hack
17:36
Vanessa Verve
Рет қаралды 2,8 М.
Foldforming: making a simple brooch using line folds
9:40
Charles Lewton-Brain
Рет қаралды 10 М.