Ford 3.0 V6

No video

Ford 3.0 V6

Рет қаралды 51,020

Clint V6

Күн бұрын

Ford 3.0 V6 uprated 4bbl HOLLY 79cam And 2 badass straight exhausts

Пікірлер: 93

@teonthevwwhisperer7316 3 жыл бұрын

Nothing better than the sound of pure raw power

@Your2TiminEx 2 жыл бұрын

Sounds very hostile and aggressive, love it

@dodgeramsport01 4 жыл бұрын

Oh that Ford engine sound!! Oh yeah baby!

@nicholasadams6607 Жыл бұрын

Ford v6 is the best.

@DICKHEADLUKE313 5 жыл бұрын

Sounds the nuts Always been a v6 fan Once u tune them they do sound proper

@gksecure6602 Ай бұрын

American v6s always sound better than other countries

@ryanhester7166 4 жыл бұрын

Rumbles like a v8 at idle but sounds like a v6 revved

@fightnight47364 5 жыл бұрын

Okay when y'all get done playing ,you can put that back in my 01 ranger thanx.... That vulcan sounds CRAZZZZZZY

@jaredalexander3403 4 жыл бұрын

Damn that is a vulcan? I have a vulcan sitting in my truck

@whitehorse1 3 жыл бұрын

It is Not a Vulcan! I see a vacuum advanced distributor, and plug wires in the front of this engine. Vulcans have their distributor/camshaft synchronizer in the back.

@thysdebeer1226 Жыл бұрын

Non upgraded essex motor😁

@FirstOnRaceDayCapri2904 8 ай бұрын

Ford UK Essex V6

@JanKowalski-hv4dh Жыл бұрын

what a monster wow

@EATSLEEPDRIVE2002 Жыл бұрын

Can’t get over this is the same engine that was in my mom‘s 1997 Ford Taurus station wagon😂

@majed6956 5 ай бұрын

Jesus. This is the V6 they should've put in the Raptor. And with a supercharger.

@lincolnsimmonds7658 6 жыл бұрын

Sounds wicked!!!

@teamtoyota9048 17 күн бұрын

How sweet.

@zapwatt Жыл бұрын

I would really like to know what was done to this engine and the cam specs too.

@tommytippee2437 Жыл бұрын

I'm throwing out the Hi Fi this is fuckin awesome.

@JiteshRatanjee 4 жыл бұрын

That's it, I'm straight piping. Screw the neighbours haha. Dam!!!

@joeyysee6632 3 жыл бұрын

I just got a Vulcan 3.0 V6 and I want to do some bolt ins but can’t seem to find headers for them only thing I can think of right now is CAI and exhaust work

@andrewpowell8327 3 жыл бұрын

JBA sells them

@whitehorse1 3 жыл бұрын

Where is there a Vulcan V6 in this video?

@zapwatt Жыл бұрын

@@whitehorse1 Pause the video at 57 seconds and take a good look at the valve cover.

@teamtoyota9048 17 күн бұрын

Is it safe to run straight system like this in a car?

@mrdlud1 7 жыл бұрын

That's badass! Meanest sounding V6 I've ever heard. Is that basically the Ford Ranger 3.0 engine? Thanks in advance. DL

@FirstOnRaceDayCapri2904 6 жыл бұрын

No that's a different engine, this engine is an Essex V6, in the Ranger they used the Vulcan V6.

@panduhishiko7294 6 жыл бұрын

essex used in the sierra/sapphire .

@panduhishiko7294 6 жыл бұрын

cortina as well

@DICKHEADLUKE313 5 жыл бұрын

Essex v6s sounds the bollocks

@davidhalbleib2467 4 жыл бұрын

They used the Vulcan in Rangers as well. My wife had one in her Mazda B 3000 truck, and I owned Vulcans in a Taurus and a Probe. Whipple even made a bolt on roots style supercharger kit for the Vulcan in the Ranger way back in the day.

@alexnorthan2476 6 жыл бұрын

What all did you have done to the engine its a 3.0 from ford ranger right

@clintv6600 6 жыл бұрын

Good day I had the engine completely redone with mild cam. Not sure what vehicle it came out of. But it is the upgraded/uprated version (it has rocker shafts like the 3.4)

@FirstOnRaceDayCapri2904 4 жыл бұрын

No it's not the Vulcan V6 from the Ranger, it's a British Essex V6

@youncyber 2 жыл бұрын

It's can possible make this engine with block 3.8 Mustang 1994 ? I would like to do it carburetor

@lincolnsimmonds7658 6 жыл бұрын

Sorry to bug you 😄what sort of cam

@clintv6600 6 жыл бұрын

No problem it was reprofiled to 79

@user-cq7xs7xg8f 5 ай бұрын

Ford cortina right?

@clintv6600 6 жыл бұрын

Haha ja net omi hoek. Thanx my Father built me that engine start stand but I had the engine built by an engineering company so they broke everything in but that was about 3years ago and was expensive to do 13k

@panduhishiko7294 6 жыл бұрын

What car did you build it into?

@joseponce5652 4 жыл бұрын

No quema cuh

@raymyers4539 3 жыл бұрын

Could you make the 2.8i injection system fit the 3.0

@jareknowak8712 4 жыл бұрын

OMG ❤ 👍

@raisgrr8420 3 жыл бұрын

Здравствуйте! От какой модели двигатель ?

@Chrisanabolic 2 жыл бұрын

Cam??

@panduhishiko7294 6 жыл бұрын

Sir Clint, I don't know if you made this clip yourself. If you didn't please, put me in-touch with the guys tuning this engine. I'm in desperate need of assistance, my V6 sierra is dead because hacked repairs. Please help

@clintv6600 6 жыл бұрын

Hey bro where are you from?

@panduhishiko7294 6 жыл бұрын

If only I was nearby, I'm from Namibia, Africa. Are you from the States?

@clintv6600 6 жыл бұрын

Yes you are far I'm from Gauteng South Africa

@panduhishiko7294 6 жыл бұрын

Julle is net omi hoek. Your establishment is super clean and the engine stand(tester) is what kept my attention

@351cleavland 2 жыл бұрын

Do that's what it sounds like with premium gas.

@davidhalbleib2467 4 жыл бұрын

😎😎😎

@CptnSoapMactavish 5 жыл бұрын

Hi Clint, please advise on what i need to do to get my 3.0 essex sounding like that. Its the older version with the blue block heads. Everything is standard. I also have an RS2000 gearbox which im considering using on that motor, coupled with a 3.08 diff and 13 inch wheels.

@CptnSoapMactavish 5 жыл бұрын

Im in Cape Town, if you can, message me on whatsapp 061 967 1099. im fairly new to this engine building game and I've found the sound im looking for😁 btw, what size exhaust are you using and did you have the heads ported and gasflowed?

@zapwatt Жыл бұрын

Not even close to the same engine family.

@lincolnsimmonds7658 6 жыл бұрын

Any ideas on jet sizes for a 390 holly carb

@clintv6600 6 жыл бұрын

Keep it standard be careful not to over feul

@Hamthe110 4 жыл бұрын

Clint V6 what’s the standard jet sizes and all the other tuning bits on the carb as setting up an Essex v6 with race heads rally cam and high lift rockers and using 390 double pumper

@christiancleland6095 4 жыл бұрын

Is this taken in south africa?

@clintv6600 4 жыл бұрын

It sure is🙂

@clintv6600 6 жыл бұрын

Still busy Nissan 1400 bakkie

@theejoeylee 5 жыл бұрын

These vulcans don't make alot of power, DRINK fuel for the HP, but they wont die!

@jaredalexander3403 4 жыл бұрын

I dont think it's a vulcan

@theejoeylee 4 жыл бұрын

Its probably an Essex. They made them in 3.0L outside of the US. I just noticed the foreign plates in the background.

@jaredalexander3403 4 жыл бұрын

Yeah I think you right, theres some videos of some nasty cammed Vulcans one is in a ranger an the other is in a Ford turas or how ever you spell it they sound good tho

@theejoeylee 4 жыл бұрын

@@jaredalexander3403 There is a nasty turbo Taunus 4.0L colonge v6 ..the pushrod one. kzfaq.info/get/bejne/m750mJpqup_WpIU.html

@theejoeylee 4 жыл бұрын

@@jaredalexander3403 Here is another nasty pushrod Ford v6. One of my favorite kzfaq.info/get/bejne/qsxpe5Bzyq3SfKc.html

@lincolnsimmonds7658 6 жыл бұрын

What carb u running !

@clintv6600 6 жыл бұрын

450 CFM 4160 4 barrel Holley

@ryanpillay2679 4 жыл бұрын

@@clintv6600 Im looking to upgrade my engine, exact same engine, what would you recommend bud:) Also i heard that a 450 is a little too big for this engine but it doesn't seem to be the case here on yours! would you recommend it?

@ryanpillay2679 4 жыл бұрын

Im also in Gauteng btw, if possible maybe you could whatsapp me? i also have a Sapphire 3.0i RS i might build up haha, got that and a GLX, heres my number, 067 079 5076

@clintv6600 4 жыл бұрын

@@ryanpillay2679 Absolutely not bro 390 is going to be the best I ordered mine just waiting for it to arrive it is expensive though 15k brand new

@ryanpillay2679 4 жыл бұрын

@@clintv6600 I was also planning on a 390, then i was going to gas flow the engine, put in branches and a free flow, im just wondering about where i can get a cam upgrade hey, im not too familiar on those!