FORD 6.7L FUEL FILTER CHANGE FAST!!! 2011-2016 F350 Powerstroke how to change fuel filters reset

Рет қаралды 754,506

6 жыл бұрын

PLEASE READ 1ST!
NOTE: AFTER LOOSENING THE YELLOW DRAIN VALVE, IMMEDIATELY BEGIN TO LOOSEN AND REMOVE THE CANISTER. A POPPET VALVE WILL STOP THE FUEL FLOW WHEN REMOVED. IT WILL JUST KEEP DRAINING IF YOU LEAVE VALVE OPEN AND DON'T REMOVE CANISTER. Forgot to mention this in the video.
On Amazon for this truck:
*OEM FUEL FILTER KIT: amzn.to/2EAQD2c
*32mm SOCKET: amzn.to/2vb7M3y
*OEM AIR FILTER: amzn.to/2SibRL0
*OEM OIL FILTER: amzn.to/2LP1A7U
*ROTELLA 5w-40 OIL(takes 13qt): amzn.to/2BFBfTD
*OEM TRANSMISSION FILTER KIT: amzn.to/2Lc9ND5
*MERCON SP ATF: amzn.to/32gQPAH
Check out @FordTechMakuloco who has a more detailed video on this if you need more info/tips `
~~~~~Help Support the Channel Below~~~~~
~Subscribe Here: kzfaq.info...
~Follow on Instagram: / nononsenseknowhow
~Donate via Paypal: www.paypal.com/cgi-bin/webscr...
~Shop on Amazon from this Link: amzn.to/2uDE6eT
~My Gear/Tools on Amazon: amzn.to/36S6J6s
*I get a small commission on any purchases made through the Amazon affiliate links on this page. Doesn't cost you any extra and helps me to continue producing content. Thanks!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Other AWESOME Channels You Should Check Out:
~South Main Auto Repair LLC: / @southmainauto
~BleepinJeep: / bleepinjeep
~Project Farm: / @projectfarm
~Chris Fix: / @chrisfix
~Andrew Camarata: / @andrewcamarata
~Humble Mechanic: / humblemechanic
~Essential Craftsman: / @essentialcraftsman
~EricTheCarGuy: / ericthecarguy
~Sailing Doodles: / @sailingdoodles

Пікірлер: 652

@sbeckius 2 жыл бұрын

Best video on KZfaq. Doesn't start off with 12 minutes of crap about his cat or a story about washing socks. Just gets right into it.

@BLACKMONGOOSE13 Жыл бұрын

Washing socks….lmoa😂😂😂

@sfsgm 3 жыл бұрын

A man that doesn't need to tell his life history. Thank you for culling out the bullsh*t that most other people on You Tube seem to think is necessary. Big thumbs up.

@NoNonsenseKnowHow 3 жыл бұрын

Thanks! I appreciate the thumbs up and feedback

@NewLeafRoofing Жыл бұрын

He says, “Maybe even throw me a subscribe.” I’m thinking what?! This guy isn’t begging like the rest of KZfaq? He’s accurate, to the point, and doesn’t try to hard sell on getting subscribers. I like it. You got a subscriber out of me. Keep up the good work.

@NoNonsenseKnowHow Жыл бұрын

Thanks so much Jordan

@weskent6647 4 жыл бұрын

I get so tired of 30 minute videos for a 5 minute job. Thank you guys for a great video. Very helpful and brief!

@edgaralejandre1522 3 жыл бұрын

i like the way this guy tells you how to fix things,no bull crap and no taking all day to explain a simple thing, thank you nononsenseknowhow..

@MrTexasmurph 3 жыл бұрын

32mm socket is the same as 1 and 1/4 American socket. Thanks for the video, I was going to make one, this saves me the trouble.

@NoNonsenseKnowHow 3 жыл бұрын

My man, thanks. And make sure to check the update notes in description if you didn't do the job yet.

@9maggio66 5 жыл бұрын

Great video. I was going to spend almost $180 at the dealership to have this done, but now I am going to do it! Thanks for the short sweet and thorough video.

@acdii 4 жыл бұрын

On the lower fuel bowl there is a little tab at the very top that meets up with a little tab on the housing itself. When you tighten it, these will touch, and that is the stopping point. As mentioned in the video, if you crank on it, this tab will break off and damage the filter housing. Apparently the previous owner of my truck had done just that as I watched this video to find out how to remove the bowl and after getting it off, found the housing broken at that point. Thankfully the damage is just that little area and it still seals. Get a light up there and watch as you tighten it and that will prevent an Oh Shit moment. This video was quite helpful on the lower filter. Appreciate it. I read a few who had air issues. What I did was replace the top one first, then ran the truck a bit to purge it, then did the lower one. I turned the ignition on and waited until the fuel pump changed pitch before starting. No issues with it starting.

@dirtymax843 2 жыл бұрын

Yes changing one at a time then running it definitely helps. I've had a few times I've been in a hurry and did them both and she wanted to crank for a few seconds before firing. Same goes for semi trucks too we always do one at a time or else you have an oh shit moment haha

@Spanky_McWaffleson 5 жыл бұрын

Great video! I appreciate your keeping it short, to the point and including all pertinent info. Also, 1-1/4" socket can be substituted for 32mm. 😎

@PhillipBlanton 2 жыл бұрын

BRAVO! You didn't waste any time warning me to wear OSHA-approved goggles, gloves, hearing protection, respirator, and a Tyvek suit to protect myself from getting cancer due to exposure to Diesel fuel; then go into excruciating detail about all the ways one can injure themselves while changing their fuel filters!!! Perfect, Awesome, No-Nonsense Video! This is why all the chicks dig you.

@TheOdiesel 5 жыл бұрын

Awesome and straight to the point!! No diarrhea from the mouth! Love it!! Keep up the good work sir!!

@wesdoyle209 4 жыл бұрын

Best 6.7 powerstroke fuel filter change video on KZfaq .. concise and precise!!

@jestofreestone1 2 жыл бұрын

Finally a video that doesn’t go on about the history of fuel filters, where they are made, what synthetic materials they are made of etc etc. on - off. Done. F yeah

@Rattlecanjeff 5 жыл бұрын

Outstanding! Really love your straight to the point approach. It is quick, but contains all the important parts.

@robertvilliard6768 3 жыл бұрын

How great is this guy!

@anthonyflorez2603 3 жыл бұрын

Right he needs to make a video on every part of this truck

@beauulvick4055 3 жыл бұрын

Ok it's about time someone had smarts enough to make a video that everyone needs without all the BS, excellent video.

@kentbullard6917 5 жыл бұрын

Very good video. Clear, concise,thorough and not a lot of wordiness. Thanks.

@user-th1ts3nj7w 5 жыл бұрын

Thanks for the detailed how to. From a Chevy tech that got stuck with a Ford.

@tomdumay3885 4 жыл бұрын

I wish ALL how-to videos were like this. Perfect editing, instructions, and well - like the channel name says "no nonsense". Thank you very much!!!

@NoNonsenseKnowHow 4 жыл бұрын

Thanks for the encouraging words!

@jeromemainmanmanne7496 3 жыл бұрын

This really helped me after our 2014 F350 spilled about 15 gallons of fuel down the highway in 5 minutes and died afterward. Come to find out the top fuel filter housing was cracked on the bottom! Thanks for making this a simple fix after we found out where the massive leak was coming from...

@bobkampmann337 3 жыл бұрын

Agreed! This guy knows how to make a video. No BS and straight to the point!

@chrisromanjenko8279 Жыл бұрын

My 6.7 gelled up today in -15 and -40 windchill (apparently didn't have enough treatment added) this video was awesome! With no experience on this vehicle I had my wrench set out in the pickup and had new filters on in less than five minutes! Thanks for the help!

@reidyrodriguezrodon4280 5 жыл бұрын

this guy is just gold, thanks brother for the video

@paularthur8055 Жыл бұрын

Thanks! I'd changed my filters before but I needed a quick refresher. The note about loosening the filter housing as soon as you open the yellow drain valve was particularly helpful. When I completed the air purge process the engine wouldn't start but then I remembered from the first time I changed my filters that the same thing happened and corrected the problem by tightening the filter housing one more turn. After that everything worked just fine.

@Rogue-Drone 2 жыл бұрын

Just finished my ’16 F350 and everything is great. Thank you for holding my hand.

@Lucky7sDN Жыл бұрын

Gold standard for tutorial videos right here. Bravo sir.

@sfsgm 3 жыл бұрын

Wow, a video that gets right to the point and doesn't drag on with superfluous chatting. Great job. Do more!

@NoNonsenseKnowHow 3 жыл бұрын

Thanks Robert I appreciate the feedback. Make sure to check the description with some updated notes on this if you're doing the job

@thecordlesscarpenter7956 2 жыл бұрын

Hell yeah! Super no-nonsense video, straight to the point with all the info and tips needed to get the job done without breaking $h!t. Thanks bro!

@henritraugott5873 2 жыл бұрын

Hey brotha you are a Rockstar! Love the simple quick explanation it took me about 30 minutes and running great! Love that you don't just ramble straight to the point, Great job and video!

@robertsmith9756 11 күн бұрын

Perfect! I'm a Pro and I learned from you fast because your a Pro!

@thomasking3939 4 жыл бұрын

Short and sweet and to the point. Just what I needed.

@jamesbinder4778 Жыл бұрын

I like the no nonsense style unlike other websites that baffle you with BS 1st then tell you what you need to know. Thanks for sparing me!! 100% will be following you 👍

@studflyer 7 ай бұрын

Great job! short and sweet. Not a 45 min video to say 10min. of info. Thank you!

@thomasking3939 4 жыл бұрын

I wish all DIY videos were as clear and succinct as yours. Very well done.

@NoNonsenseKnowHow 4 жыл бұрын

Thanks man!

@gymsreviews8155 5 жыл бұрын

It is that easy. I do mine every other time I change my oil, need it or not. Good simple video 👍

@michaelpuruleski9192 2 жыл бұрын

Outstanding! Finally a video with no fluff. Right to the point. Easy. Make more my friend.

@kylekarwowski2642 5 жыл бұрын

Thank you! very helpful video. Great camera angles and no nonsense instructions.

@terrybryant 5 ай бұрын

I have had my 2013 F-450 platinum serviced at the dealership since it was new. Once I hit 100K I started doing it myself but I have not changed the fuel filters yet as I didn't think it was that easy thinking about purging the fuel system.. You rock man for this great video. One question is when you pull the bottom filter how do you not loose fuel from the tank?

@billyt4477 4 ай бұрын

Loosen the canister, i guess it breaks the siphoning effect.

@ejokine1 2 жыл бұрын

Excellent video. No nonsense DIY info! Absolutely love it! Thank you! This is how all videos should be! Cheers!

@davidllewellyn6946 3 жыл бұрын

I refer back to this video every time I change my filters. Outstanding video. All "how to's" should be this way.

@NoNonsenseKnowHow 3 жыл бұрын

That's awesome to hear! I appreciate the feedback and thanks for watching.

@s2pointoh Жыл бұрын

Excellent video-perfect amount of detail and video demonstration. Just finished mine and it was easy thanks to you.

@angelaracino6236 3 жыл бұрын

Thank you very much just transitions from a 7.3 diesel two of 2018 6.7 diesel completely unfamiliar with this truck your video was extremely helpful and accurate I’d like to thank you and God bless you and your family

@KyleCullen Жыл бұрын

Thanks for the great video, start to finish, including the 3 minutes of key cycles it took me exactly 12 minutes to change my two filters 😂 this is only the second time ever doing it an the first time took me like 2 hours !

@ROF_85 3 жыл бұрын

Great video. Changed mine for the first time today. Too easy with your block of instructions.

@toddbeattie8384 4 жыл бұрын

It's nice to see that you have to be a contortionist to get to things to replace filters. GREAT job on you video. Keep up the good work!

@NoNonsenseKnowHow 4 жыл бұрын

Luckily these filter locations are pretty accessible compared to some real pain in the butt cars. And thanks for the feedback! If you end up doing the job, make sure to check the notes in the description. I was a little unclear about the petcock

@BJSmith-ll3uw 5 жыл бұрын

Excellent. Thanks for not wasting my time and presise instructions.

@detroit1015 3 жыл бұрын

Just did my 2015 F350 and followed this to the T and all is good so far! Thank you.

@NoNonsenseKnowHow 3 жыл бұрын

Glad it helped!

@nlepard 5 жыл бұрын

That was awesome and direct, no fluff no muff, just pure business. I can't believe you've received 25+/- thumbs down. Keep up the great work, thank you..!!!!!

@NoNonsenseKnowHow 5 жыл бұрын

Thanks man! There's always going to be haters and people you can't satisfy.

@wolfhound4010 4 ай бұрын

Love everything you do. Amazing photography. You and Jen and the Gus man is so interesting to watch. Just love your channel. Keep up the great videos!! God bless all of you.

@annettefritz3712 2 жыл бұрын

Thanks for your video on fuel filters I own 2011 6.7 superduty (the only thing to make this easier is a truck lift.)👍

@MMAdventures 3 жыл бұрын

Nice job on video. Short and informative! The key cycle 6 times was something I would have not known and probably saved me a headache and some money! Thanks.

@NoNonsenseKnowHow 3 жыл бұрын

Thanks man

@HinsonCo 4 жыл бұрын

Great video! Wish I would've read the description before replacing my fuel filter...I drained for quite awhile before realizing it wasn't going to stop until I unscrewed the canister. This was by far the most straight-forward video I saw on this. Nice job!

@natewoolsey1874 4 жыл бұрын

so I have a F350 2016 and the fuel keeps on coming out so you unscrewed the canister and it stopped ?

@markbickle508 Жыл бұрын

The first time I did it, I did the same thing.

@concreteeleganceMI Жыл бұрын

I went to the parts store to get a 32mm and it was still draining😂😂😂😂

@jeffrme 4 жыл бұрын

Best video I’ve ever seen. Straight to the point and simple instructions!

@NoNonsenseKnowHow 4 жыл бұрын

Thanks man!

@zigs95jeep Жыл бұрын

THANK YOU!!! Quick, easy, to the point. Saved me $150! Thanks again!

@chadsarver4792 4 жыл бұрын

Perfect. Succinct and to the point. Didn't need to tell us how cool you were or talk about yourself ad nauseam.Thank you. Will come back for more.

@NoNonsenseKnowHow 4 жыл бұрын

Thanks Chad I appreciate the feedback. Make sure to read down in the comments or the update in the description. As soon as you crack the petcock loose, make sure to loosen the housing right away otherwise it will continue to drain your tank

@laurenbarr4496 5 жыл бұрын

Best video by far. Thanks for keeping it short, sweet, and to the point!

@NoNonsenseKnowHow 5 жыл бұрын

Thanks! Really appreciate your feedback, and glad to hear it helped out! :)

@appalachianheartsong5487 Жыл бұрын

Awesome presentation, man it will make the next 30 minutes so much easier. Thank you!!

@buddhajr82 2 жыл бұрын

This 2015 f350 is my 1st diesel and this was very helpful. Thank you alot

@brianjordan8990 Жыл бұрын

Great video man. Short and sweet. Well done. Thank you for taking the time to do it. I wish more videos were like this.

@kxpilot71 4 жыл бұрын

Highly appreciate the short and to the point video. Exactly what I needed to know to do the job! Thanks!!

@NoNonsenseKnowHow 4 жыл бұрын

No problem man glad to help out!

@joemyersmama 3 жыл бұрын

On my 2016 F250 there is a supporting bracket on the lower fuel filter that swings out of the way after removing a 10mm cap nut. Other than that this video was spot on! Thanks for posting video and parts links.

@democratsaretheDEVIL 2 жыл бұрын

Best how to video ever made, keep up the great work. Update-cycle the key many times, i did 7 and still not enough.

@rickweihers2404 13 сағат бұрын

Clear and concise, fast and efficient! Thanks man!

@jimmetcalf707 5 жыл бұрын

He gives you everything you need to know to do the job good video

@mikem8183 Жыл бұрын

Also thank you for this great video! Guys follow the instructions to cycle 6 times for 30’seconds as per the video- I didn’t and it would not start - and then I saw the end of this great video where he clearly says don’t forget this part ! All running fine now

@rickey5353 4 жыл бұрын

Excellent video. Fellas. Make sure your batteries are up to snuff when re-priming your system. We found out the hard way that low batteries will lack sufficient balls to fully prime. All worked out fine in the end.

@BLACKMONGOOSE13 Жыл бұрын

I second. Just found out the hard way and my batteries are only 3 yrs old.

@paulirwin2204 4 жыл бұрын

I had the same issue as others, followed instructions to a T, got low fuel pressure warning and it was hard to start up. Also fuel pump when you turn the key on but not crank it was making unusual sounds. I tightened the bottom filter as hard as I could by hand but I figured I'd give the wrench a try, sure enough I got another turn out of it. So unless you're super strong or have a brand new truck, you might need to use the wrench for the last turn or so to prevent air from getting in. After doing this and doing the key thing 6 times again, I heard a much more normal sounding fuel pump and could hear the air leaving the system. Started right up fine after that. Hope this helps others, and thanks for the video! Saved me a lot of money! (Also fuel filters are cheap on Amazon, $30 less than my local O'Reilly!)

@timmcguire6949 2 жыл бұрын

same exact thing for me. had to do one extra turn after getting low fuel pressure indicator

@gitrdunelectric 3 ай бұрын

With the exception that he says do not turn with a wrench, spot on. I about freaked out cuz my truck wouldn't start. I needed 1 more turn and it took a wrench to do it, a different KZfaq video saved my ass on that one.

@steveshell6576 5 жыл бұрын

Love the straight to the point awesome video.

@charlesbarzar3775 2 ай бұрын

Thanks for the short and sweet… sooo many others with tons of oh ! Oh no ‘s ! and Bologna…. Solid help tutorial here!

@bobdylan3201 5 жыл бұрын

Appreciate the short to the point video. Great job.

@C.Lynn.Brazy79 2 жыл бұрын

This Video is an automatic subscription! How simple, cut to the chase and no bs. Subbed subbed subbed!

@DanielSanchez-du4ly 4 жыл бұрын

Thanks for being and life saver a macanic was charging me 300 bucks but from this video it took less than 10 minutes and way cheaper

@NoNonsenseKnowHow 4 жыл бұрын

No problem and glad to hear you were able to knock it out yourself. Thanks for commenting

@FredandChase 8 ай бұрын

Great video. No-nonsense and good video angles. Thank you

@jeremylocklear9118 5 жыл бұрын

Now thats a great video.....straight to the point, thanks brody.....

@dmcdow 5 жыл бұрын

I really like your consise videos. Keep doing them.

@MrNino44 3 жыл бұрын

Done it before . Your video was a great refresher .

@glenburns4232 7 ай бұрын

Finally straight to the point.keep making short informative broski!!!!!!

@mikejankoviak8542 2 жыл бұрын

This video is great. Just changed mine on my 2013. To the point and not wasting time

@jamieofalltrades536 3 жыл бұрын

To the point precise, and easy to understand. Thank you!

@raulrubio2862 4 жыл бұрын

Awesome video very helpful just did my new service truck oil change thanks to you

@casewebb7762 3 жыл бұрын

Thank you a million,,, short and to the point,,, exactly how it should be.

@jeepercole 3 жыл бұрын

Finally! Thanks for making a video with no BS!

@NoNonsenseKnowHow 3 жыл бұрын

No prob man. Thats what I strive for. Make sure to check the updates in description if you're doing this job

@johnharvell5716 3 жыл бұрын

Great video...straight to the point...lots of good info....no unnecessary talk

@NoNonsenseKnowHow 3 жыл бұрын

Thanks, I appreciate the feedback. Make sure to read the descriptions for some updated information that I forgot to mention

@jojolozano4868 5 жыл бұрын

awesome video, had a mechanic say that the fuel filters were in the tank.

@TheGicarl 6 ай бұрын

You are the man brother! Go teach everyone else how to make a how-to vid please!

@akdefense 2 жыл бұрын

Great video, great explanation, good pace and very informative. Thanks.

@matelam7168 2 жыл бұрын

to the point, no fluff, great video. Thanks!

@SomethingClever80 5 жыл бұрын

simple & quick, right to the point. you got my sub!

@stewartmcqueen7175 4 жыл бұрын

thanks for the tip made my filter change go better

@coltbuildsit 2 ай бұрын

Way to make it easy on me from this old video!!😉👍

@NoNonsenseKnowHow 2 ай бұрын

How funny! Can't believe this video is still getting views. I figure somebody has definitely done a better job covering it in a video by now. Glad it was helpful.

@mikekurtz9443 5 жыл бұрын

Take note! Short , sweet to the point! Best yet!

@NoNonsenseKnowHow 5 жыл бұрын

Thanks man!

@gogerwi 4 жыл бұрын

That was the best how to video I have viewed on KZfaq. God Bless you sir.

@NoNonsenseKnowHow 4 жыл бұрын

Thank you and good luck on the job. Make sure to check the description for an update I added. Need to loosen the housing as soon as you crack the petcock loose otherwise it will continue to drain

@gogerwi 4 жыл бұрын

This was the 4th time I changed it it was a piece of cake, just wanted to refresh the process. Yea the first time I did it I filled a 5 gallon buck. Got to break that siphon affect. Thanks again.

@NoNonsenseKnowHow 4 жыл бұрын

@@gogerwi oh I got you. Awesome!

@gunsafe357 2 жыл бұрын

Great Clear HD Video and Sound/ Right to it / Thank you Fred Steel F250 2014 6.7 Berkeley CA.

@NoNonsenseKnowHow 6 жыл бұрын

On Amazon for this truck: *OEM FUEL FILTER KIT: amzn.to/2EAQD2c *32mm SOCKET: amzn.to/2vb7M3y *OEM AIR FILTER: amzn.to/2SibRL0 *OEM OIL FILTER: amzn.to/2LP1A7U *ROTELLA 5w-40 OIL(takes 13qt): amzn.to/2BFBfTD *OEM TRANSMISSION FILTER KIT: amzn.to/2Lc9ND5 *MERCON SP ATF: amzn.to/32gQPAH

@randyharris5475 6 жыл бұрын

NoNonsenseKnowHow thanks for the filter link! 48$....... paid 110$ this morning at the Ford dealer. Won't next time, thx.

@joearnold8887 3 жыл бұрын

Perfect video, directly to the point. Great job!!

@milesbeyond3000 6 күн бұрын

Appreciate the quick tutorial, everything worked just like you said

@jimmccabe801 2 жыл бұрын

First time I've done this. Thanks to your video I did correctly. Thank-you .

@NoNonsenseKnowHow 2 жыл бұрын

Awesome to hear it was helpful. Thanks

@Fabiantito10 4 ай бұрын

Helped me a lot on first time filter change! Thank you

@NoNonsenseKnowHow 4 ай бұрын

Glad it helped!

@maxtrehus602 Жыл бұрын

Really nice nice video! Concise and too the point. The only thing id recommend is snapping the filter into the lower housing (bowl) instead of the rail mounted pump (0:55). The filter can get caught on the clips in the bowl when you screw it on and instead of snapping into place can break the retention clips and possibly crack the pump housing. Ask me how I know lol