Ford Barra Engine Build 1000 hp for $1000 P 8
Рет қаралды 10,883
2 жыл бұрынFord Barra Engine Build 1000 hp for $1000
@nathanhele2741 2 жыл бұрын
Pays to put head gasket before head studs , and your supposed to lube studs washers and nut, for correct tighting
@Cheato 2 жыл бұрын
Let him learn mate
@thysellis3677 Жыл бұрын
Jip I agree, rookie
@danielspencer486 2 жыл бұрын
Those bores and rings will be dry as all hell now after all the brake cleaner :/
@MrMotorNerd Жыл бұрын
Yep assembly lube for the first start and pump the oil circuit with a electric external pump or crank it with the starter for a minute before ignition .
@farmer3242 Жыл бұрын
Good to see the 3 step head stud nut torqueing was done.
@enesfazlic6017 Жыл бұрын
Man there was a lot of copper spray left in cylinder 2 and cylinder 5 and right at most crucial compression spot. At the top
@glenn.thornton3015 2 жыл бұрын
🤦♂️
@vk3zb534 Жыл бұрын
This is horrible in every way. I bet no RA test was done on the surface of that head. Looks like it was machined with half a house brick. Washed all the lube off the bores, 😂. Plastered everything with copper 😢 Dead set horrible
Garena Free Fire Global
Рет қаралды 56 МЛН
RestoHub
Рет қаралды 1,2 М.
Garena Free Fire Global
Рет қаралды 56 МЛН