Ford Econoline Skoolie Gets New Front Clip !

  Рет қаралды 9,367

Ryan Kalb

Ryan Kalb

4 жыл бұрын

A time-lapse of swapping my 2003 Ford Econoline to 2010+ Front clip. This was using fenders from an E450 but work on E150 E250 and E350 also. This was done on a skoolie but also works on all E-Series vans. Comment below if you have questions!
Parts List:
All Parts are from a 08 or newer econoline
Complete Swap
- LH/RH Headlights with Wiring Pigtails
- Upper Header Support
- Lower Header Support
- Grille
- Hood
- LH/RH Fenders
- Bumper
- Latch
- Upper Core Support w/ side brackets
- Lower Core Support
- Trans/PS Cooler Mount
- Lower Bumper Aero Plastics
- Hood Support Bar
- Griller to Upper Rad Support Plastics
- Fender Mount Tabs, from Donor
- Inner Wheel Liner
Minimum
- LH/RH Headlights with Wiring Pigtails
- Upper Header Support
- Lower Header Support
- Grille
- Hood
- LH/RH Fenders
- Bumper (Optional)
- Latch or Modify existing latch

Пікірлер: 21
@norcalvandweller8401
@norcalvandweller8401 4 жыл бұрын
Awesome, been looking for this thanks so much for sharing your experience Subscribed and will follow from Sacramento,Ca
@danachristie3862
@danachristie3862 6 ай бұрын
how do u go from the 2003 headlight wiring to the 2010+ headlights, you must be cutting and splicing wires as physically there isnt enough plugs on that harness to accomodate those headlghts, and unless your using a different headlight pigtail the one shown in other videos is for the square glass headlights. also how do u get the bottom on the fender where t bolts on right in front of the door at the bottom to line up as mine sticks out half and inch after its bolted on at the bottom
@RyanKalb575
@RyanKalb575 24 күн бұрын
There is definitely a slicing going on. I use the pigtail from the newer headlights and spliced it with the original harness I can upload a wiring diagram.
@Hatummaster
@Hatummaster 4 жыл бұрын
Fantastic, I am doing my box truck
@user-zz9kv9fd3j
@user-zz9kv9fd3j 2 ай бұрын
Was trying to figure out where to un bolt the screws for the fender but you time lasped through it
@benwright6330
@benwright6330 2 ай бұрын
Why is that better, .. what's the advantage of new vs. old, other than more modern look?
@daddyrehab7599
@daddyrehab7599 2 жыл бұрын
What is the lower white bracket you put on?
@nlambuca
@nlambuca 3 жыл бұрын
the metal radiator support is the one also from 2008+ ? hood hinges can the old ones be used?
@RyanKalb575
@RyanKalb575 3 жыл бұрын
Correct, the hood hinges are original, latch is from the donor. Radiator core support from the 2008+
@danachristie3862
@danachristie3862 6 ай бұрын
how did yoou rewire the headlights
@cesararroyo758
@cesararroyo758 3 жыл бұрын
How you losing the top screw of the passenger fender? Cause I have the same bus I’m going to start mine tomorrow
@RyanKalb575
@RyanKalb575 2 жыл бұрын
That was such a pain! I ended up drilling a hole from the inside of the bus then put a cap on it. Sorry about the late reply! I can send photos if you have further questions
@rsautomotivedetailing635
@rsautomotivedetailing635 2 жыл бұрын
Hey brother. Awesome build. I’m Getting ready to build mine. I was wondering what other parts I need besides the fenders, good and headlights. & what I can re use from the -2007 van. Please help, thanks I’m advance 🙏🏽
@RyanKalb575
@RyanKalb575 2 жыл бұрын
The minimum is headlight, fenders, inner core support to hold the headlights both upper and lower. I also recommend the upper metal with the latch as well.
@RyanKalb575
@RyanKalb575 2 жыл бұрын
In the video the white parts are the ones I used
@binhduong3100
@binhduong3100 3 жыл бұрын
How much would it cost to upgrade 2004 e450 ? Like that ?
@RyanKalb575
@RyanKalb575 3 жыл бұрын
Cost me about $600, but price varies.
@thesuperchargers5819
@thesuperchargers5819 3 жыл бұрын
So I have a 99 van and a wrecked 2012 van that I want to swap the front off of the new one onto the old one. I want to know exactly how hard was this. By the looks of the video it seems really hard to do. But just wanted more info on this. Thanks!
@RyanKalb575
@RyanKalb575 3 жыл бұрын
Honestly its pretty easy, you can skip the step where I weld in the risers. Your going to want the upper rad support though. Also need the latch from the donor. Overall depends on skill set. I chose to try and get all the mounts for the fender you really only need 2
@mechudotico
@mechudotico 27 күн бұрын
Do you did it ?
@thetrueking4535
@thetrueking4535 3 жыл бұрын
Its the freinstien buss. Only prettier.
Econoline Front End Conversion 2 of 2
12:57
TheDirtVan
Рет қаралды 42 М.
Ford 7.3L Diesel Van - Utah to Oregon - Hightop Effect on MPG
8:43
Primal Outdoors - Camping and Overlanding
Рет қаралды 30 М.
Wait for the last one! 👀
00:28
Josh Horton
Рет қаралды 167 МЛН
🤔Какой Орган самый длинный ? #shorts
00:42
Я нашел кто меня пранкует!
00:51
Аришнев
Рет қаралды 4,4 МЛН
Does size matter? BEACH EDITION
00:32
Mini Katana
Рет қаралды 13 МЛН
4x4 Van Conversion - Ford E350 - AJs 4x4 Vans
16:10
Primal Outdoors - Camping and Overlanding
Рет қаралды 338 М.
Ford Econoline E350 Front bumper trim and fender removal and repair
21:38
4X4 Econoline - Front Bumper
15:40
CheatedDeathFabrication
Рет қаралды 9 М.
Ford Econoline Van 4x4 Build
14:14
WeldTec Designs
Рет қаралды 23 М.
Mini-Bus Conversion Timelapse
13:43
TannerAdventures
Рет қаралды 397 М.
Meagan's Ford E 350 4x4 Van Conversion by AJs 4x4 Vans
16:19
Primal Outdoors - Camping and Overlanding
Рет қаралды 198 М.
1992-2002 Ford Econoline super duty mirror Swap
8:58
Dallas Dunn
Рет қаралды 16 М.
Учить дальнобоев, было ОШИБКОЙ
0:49
Дикий ДИК
Рет қаралды 1,3 МЛН
расход топлива грузовиков СССР часть 2
0:34
Сергей Шаров
Рет қаралды 1,2 МЛН
Учить дальнобоев, было ОШИБКОЙ
0:49
Дикий ДИК
Рет қаралды 1,3 МЛН
СЕКРЕТ AMG ВЫХЛОПА РАСКРЫТ #shorts
0:58
Мистер Глушитель
Рет қаралды 1,5 МЛН