Ford F-150 ignition switch fix 1991 or 1987-1991 electric switch fast fix diy

Рет қаралды 28,454

Жыл бұрын

1991 f150 ignition switch was finicky and would stay engaged after starting. Fixed in 15 minutes with Napa part # KS6694. Need 11mm wrench or 1/4” socket drive and some patience. Do not need to drop steering column!! Please subscribe

Пікірлер: 26

@krispyytv7067 5 ай бұрын

If you want to do this and you’re a bigger guy, would recommend taking off that silver plate (steering column bracket) it’s easy to take off and on, & it makes it ALOT easier. Hats off to this guy for being able to do it with the bracket still on 👏

@ALPHAGROUND1 3 күн бұрын

My buddy keeps saying I need to replace the steering column to fix this that might be a way but I'm glad I found this video gunna try this out soon

@kencanoe 6 ай бұрын

This worked just as described, on my 91 f150...it would have been a lot more work for me to drop the steering...thanks for posting this!

@dtmxing 6 ай бұрын

You’re welcome! Please share and like!! Lord bless you sir

@windjammer1958 10 ай бұрын

Thank you for this video, I've been holding off doing this job, until I saw how easy this really was for you, I just finished mine, the only trouble I had was getting the pin back in line, but once I slide farther to the middle of the truck where I could see the pin and the back of the switch it when back together easy and quick... Thanks !!!

@Dnixlv 7 ай бұрын

Thank you so much for your video ❤❤❤❤. I have to do this in my 86 F150 I was ready to drop the steering column.

@captian1000 10 ай бұрын

Hey just wanted to say your video just saved me so much time. Thanks for uploading! 🎉

@betotrokas 8 ай бұрын

Glad I found this video, my broncos key is super sensitive, I barely touch the key while it’s running and it shuts off, hoping this will fix my issue

@natechilders5027 11 ай бұрын

You know you could of literally unbolted the steering column bracket and it would of made you life so much easier

@dtmxing 11 ай бұрын

Already only took a few minutes

@Truckster_Metfan91 Жыл бұрын

Good explanation! 🤘🏻

@robertj5290 Жыл бұрын

I'm glad you made this video. If you explained things a little slower and in better visual detail it would have been more helpful. It really left me confused. Communication is key!

@dtmxing Жыл бұрын

So it was a quick video to lead people in a proper direction. Not super detailed and I did it after and wanted to help lead people into the direction if they had the issue. Not a full step by step video

@mikeyholec1136 2 ай бұрын

Huge question, I have ‘87 f150 manual transmission, 5.0 4x4. I got the truck from a guy who didn’t know anything. I have replaced the battery, solenoid, and now this ignition switch. I turn the key, my lights come on and the dash as well. But I still have 0 click and 0 crank. Any suggestions?

@dtmxing 2 ай бұрын

Try manually operating the switch, you sure it got hooked up right so the key pushes the rod on switch properly ? Start from there and trace power and see where you aren’t getting power from

@TLF43 27 күн бұрын

Have you found a solution for this yet?

@ribeye-03 6 ай бұрын

Mine just has no “defined” accessory slot then ignition slot.. like its smooth. Is that what this video will fix basically?

@JoseLopez-tb5mk 7 ай бұрын

Can you liwer the steering column as well....?

@luv5sides 3 ай бұрын

Nice but what if the harness if it broke how do you replace that because the wire not color coded

@dirtfloorgarage8489 4 ай бұрын

I turn my key all the way, then all the way forward. Me and my dad took apart the steering wheel to put a new ignition cylinder and the truck still wouldn’t turn on with the key. Still have to use the push button start. Could this be one of the culprits?