@jamesryplewski2860 11 ай бұрын
That’s a cool build but I think it would have been more reasonable if you swapped the Cummins into a unreliable 6.0 or 6.4 liter truck. The 7.3 is just as reliable as the 24v in my opinion.
@shockr9959 3 жыл бұрын
Awesome! I have a v10 excursion I’m wanting to put a 5.9 in.
@randyharms2307 3 жыл бұрын
I just want to know who would dislike this video. It is a great video
@Jonesys 3 жыл бұрын
LOL thanks
@AlbertoHernandez-sg3uf 3 жыл бұрын
@@Jonesys where can I find the motor mounts?
@douglasdonegan9372 7 ай бұрын
@Jonesys how much is a 06 swap
@smallblockfuelie 4 жыл бұрын
Cool project! That air ride will be nice.
@Jonesys 4 жыл бұрын
Appreciate it!
@fordmuscleluis9710 Жыл бұрын
I'm wondering what the difference between this Industrial Cummins engine and a Dodge pick-up application in terms of conversion kits and parts
@jenkins5824 4 жыл бұрын
Very cool!
@Jonesys 4 жыл бұрын
Thanks appreciate that
@bryanmitchell5728 3 жыл бұрын
Wow !!!! Very cool.
@trentonolivier 4 жыл бұрын
I see the Wagoneer in the background!!
@Jonesys 4 жыл бұрын
Yes I'm hoping to get back on the Waggy soon.
@jimkillen1065 Жыл бұрын
Nice job on the conversation. I was thinking about adding a fluid damper to my truck also . Your thoughts on the damper, thanks .
@PeterHatch-mx7zc Жыл бұрын
Do you sell motor mounts and any wiring harness thks
@douglasdonegan9372 2 жыл бұрын
I have a 06 f350 4x4 and would like a estimate on installing a 06 plus common rail cummins .... jonesy"s looks like the place
@Legendsofthelawn 3 жыл бұрын
Wait...So you can just swap to a GV style head on the compressor and the AC lines will just bolt on? Theres no need to have new ends lines made?
@williamfrost7712 3 жыл бұрын
What changed your mind on using a different alternator?
@AlbertoHernandez-sg3uf 3 жыл бұрын
Where can I find the motor mounts?
@dante04srt 4 жыл бұрын
How do you like the fit/accessibility of the Cummins in the SD chassis as opposed to the GMT400 chassis? I had an 05 F350 prior to buying my 98 K3500 and had determined that fitting a 5.9 in the SD engine bay would be a heck of a lot tighter than in a different platform. The SD is a great, strong platform and the cabs are nice and roomy but they really shoehorn the engines in there.
@Jonesys 4 жыл бұрын
There is a lot more room around the Cummins in the SuperDuty than there was around the 7.3L Powerstroke. I would never try one of these swaps without removing the cab. With that said the Cummins fits great in the SuperDuty chassis. One of the pros of the Ford Cummins swaps is that you already have an intercooler which is a challenge in the GMT400 platforms. Thanks for the comment.
@douglasdonegan9372 2 жыл бұрын
@@Jonesys what's a cummins swap average cost for a 06 f350...
@alabamamotionpictureproduc6626 4 жыл бұрын
Now that you've done both, which one was easier? The Ford or GM?
@Jonesys 4 жыл бұрын
They both have there pros and cons.
@daytoncooper3150 3 жыл бұрын
Just pulled off my 2000 v10 super duty cab, have a fist gen 5.9 to install interested in the Hi mount kit and inter cooling plumbing can you point me in the right direction for sources . Like the video
@Jonesys 3 жыл бұрын
adventurevehiclesnw.com/shop/diesel-conversion-parts/chevrolet-gmc/73-87-chevy-truck/b-series-cummins-hd-high-mount-ac-bracket-kit/
@Jonesys 3 жыл бұрын
We don't sell the intercooler pipes but I have a video that shows you how I built them with our high flow Air horn kit adventurevehiclesnw.com/shop/diesel-conversion-parts/chevrolet-gmc/73-87-chevy-truck/cummins-high-flow-diy-air-intake-horn/
@allfamilyimportanddomestic8508 2 жыл бұрын
I'm looking into doing this to my 2001 Ford f250 5.4 triton is there a kit to make this easier or all custom fab work ?
@kevinredden Жыл бұрын
Diesel Conversion Specialists has a kit. Don't forget to beef up your front coils Diesel ways 400 pounds more than 5.4
@samueldefelice2816 4 жыл бұрын
Hey! What did you use on the frame to refinish it. Looks great.
@Jonesys 4 жыл бұрын
A lot of hard work and SEM's Rust Shield. Thanks for the comment More details on this build can be seen at our blog www.adventurevehiclesnw.com
@aedraz1541 3 жыл бұрын
Very cool What do you think about changing one piston (6th) wich was damged because of the rise of heat ? In cummins 6bt 5,9 12v
@leolopez1854 2 жыл бұрын
What year is the truch
@Jonesys 2 жыл бұрын
2000
@charlesmiddleton5499 3 ай бұрын
It's funny how everyone calls it a fummins well when it's in a dodge it should be called a DUMMINS
The Fast Lane Truck
Рет қаралды 617 М.
Fun King Garage
Рет қаралды 7 М.
TheFumminsPage rpope
Рет қаралды 19 М.