@Bobbyd84 Жыл бұрын
Very good coverage of this job and very professional job thanks bud
@EllsAutoCare Жыл бұрын
Awe thank you so much 🙏🏻
@benemoreira Жыл бұрын
Thanks mate..you vídeo help me a lot..I saw a another video but that’s was wrong and I straggling to fit..and I don’t fit..it I found you very help and easy.thanks
@EllsAutoCare Жыл бұрын
This means a lot! Thanks so much for this comment 🙏🏻 im truly grateful
@leesamwell6483 Жыл бұрын
Didn't secure the pin with spring pin
@gamingforlife4830 9 ай бұрын
Great video mate !.. helped alot ;)
@EllsAutoCare 9 ай бұрын
Thank you so much! Happy I could help! Did you nail it?
@gamingforlife4830 9 ай бұрын
@@EllsAutoCare well in my mind it did ! ;) gonna change it next weekend, .. i had done it before on other cars, but first time im doing it on the RU 8 ;) !...
@EllsAutoCare 9 ай бұрын
@@gamingforlife4830 your be fine! You’ll crush it! Make sure you come back and let me know how you get on
@gamingforlife4830 9 ай бұрын
It went good, had to do both sides, change the exhaust, and the console for the shock obsober, ( the top one with the bearing ) im not sure its the rigth word for it... and we changed Pads plus disc and changed 1 caliber aswell, new oil filter with oil, changed the gear oil ( havent been done before i think, and the car is on 160.000)and Airfilter was changed, plus the airfilter rubber mount to the engine was change, its kind of broken, how i dont know.. :) @@EllsAutoCare
@EllsAutoCare 9 ай бұрын
@@gamingforlife4830 that’s a lot of work that is! It’s basically a new car!
@garethoswald3392 4 ай бұрын
You forgot to put the R clip in the bottom pin after you tapped it in. Thats what the hole in pin is for. With the way the pads work. This pin could work its way out and fall out. Not good !! You can see the empty hole on pin at 8.14 on vid
@EllsAutoCare Ай бұрын
Hey mate thanks for the insight
@garethoswald3392 Ай бұрын
@@EllsAutoCare everydays a school day.
@EllsAutoCare Ай бұрын
@@garethoswald3392 if it’s not your doing something wrong
@Callumseven 2 жыл бұрын
Is this a Mk II Ka ?
@EllsAutoCare 2 жыл бұрын
Yes it is mate
@andrewmatthews7920 Жыл бұрын
Ooo, just doing this, alls going well but my caliper centre is sticking out, so can't get it back down, any ideas?
@EllsAutoCare Жыл бұрын
@@andrewmatthews7920 the piston ? You can gently leaver it in with a screwdriver or get a piston push back tool
@andrewmatthews7920 Жыл бұрын
Awesome! Yeah, I'll get on it now bud, cheers! 😀
@flbyrne99 Жыл бұрын
Great vid. Thanks mate. I’ve got confidence now to do mine. I’ve got the tools and a nice warm garage! Also, main dealer wanted over £240 to do the job. One point: When you push calliper pistons back won’t brake fluid spill out of the filler reservoir?
1A Auto: Repair Tips & Secrets Only Mechanics Know
Рет қаралды 4,4 МЛН
АвтоСтронг-М
Рет қаралды 41 М.
Tuto's Tommy
Рет қаралды 2,2 М.