Ford Mustang Repaint Part 2 , Primer Blocking And Paint Prep and TimeLapse Masking

Рет қаралды 12,022

8 жыл бұрын

In this video i will be taking you through the Blocking work and the pre paint prep on this Ford Mustang , Including all tools and materials used in the video , and ending with a time lapse of the masking stage.
#Passion4Paint merchandise now available head to our site at
teespring.com/stores/passion4...
If you have any questions feel free to ask away and as in any video i will do my best to answer you all.
I hope you guys enjoy and dont forget to like and subscribe
/ tonys_refinishing
or like our facebook page
/ tonysrefinishing
/ tonys_refinish
Support our channel in making bigger better content / tonysrefinish

Пікірлер: 35

@markemmett7270 8 жыл бұрын

Another great video Tony it looks like you are helping poeple all over the globe the power of the web. Thanks for posting

@TonysRefinishingTV 8 жыл бұрын

+Mark Emmett thanks man , hard few years and a very hard last year so now just as you know , so now just sharing what i do and if a can help people in the process then thats amazing #Passion_4_Paint

@josephpowers3839 8 жыл бұрын

Also enjoyed the Masking fast forward at the end.

@TonysRefinishingTV 8 жыл бұрын

+Joseph Powers thanks bud i may start oncluding all the masking in the videos in this way from now on as i think it helps keep the video shorter but still including the work

@chidexkofi8789 4 жыл бұрын

Great tips on blocking primer

@TonysRefinishingTV 4 жыл бұрын

Thanks

@toshtwentythree195 8 жыл бұрын

this video could have been 2 hrs long, I till would have loved it....Thats a big area to block sand, I bet your arms were falling off at the end of it.. the information is pure gold mate...your a diamond...thanks

@TonysRefinishingTV 8 жыл бұрын

+Tosh twentythree (tosh 23) haha i dont think many would have watched me blocking for that long, and yeah mate its a days worth of work to block out and then da it all and prep all the edges up ready

@josephpowers3839 8 жыл бұрын

Another great video,can't wait to see the finished product. Great KZfaq channel, wish I came across it sooner.

@TonysRefinishingTV 8 жыл бұрын

+Joseph Powers thanks man just trying to show what i do an if possible help out a few people along the way

@johnswilley6764 4 жыл бұрын

Thank you Sir, I enjoyed the detailed info of the process, and yes, the masking is also needed info. Best wishes!

@TonysRefinishingTV 4 жыл бұрын

No problem your welcome buddy

@clevo351 8 жыл бұрын

Tony you are a champion! This is what we want to see,the prep work to get the panel dead straight. Regards from Sydney Australia Cheers Mate!

@TonysRefinishingTV 8 жыл бұрын

+clevo351 hey man no problem when you asked about including this i had the camera with me so thought i would make sure we got this into it for you, and great to hear people so far away are following the videos too

@davidvazquezvazquez4465 Жыл бұрын

Megusto🎉

@wojciechzyczkowski1321 8 жыл бұрын

Super opis! W końcu porządne objaśnienia co i jak ;-) Pozdrowienia z Polski!

@TonysRefinishingTV 8 жыл бұрын

+WOJCIECH ŻYCZKOWSKI dziękuję za miłe słowa

@marvinhenry1027 5 жыл бұрын

Awesome videos Tony. .. Keep it up

@TonysRefinishingTV 5 жыл бұрын

thanks buddy and thanks for watching

@barrycampbell3442 5 жыл бұрын

Gr8 video m8 alot of info keep up the good work 👍👍

@TonysRefinishingTV 5 жыл бұрын

Thanks Barry

@jasonevans6720 8 жыл бұрын

Nice one Tony, the only thing i do different is the grades of paper once i have used p80 to take down the initial filler i never use 80 again i have found 120 takes things down just as quick but reduces the risk of sand scratches i then switch to 180-240-320 where needed sometimes if its a good sanding primer some grades can be missed out, then i always finish the primed areas with p500 on a small orbit da sander with the interface pad and use a top quality p800 for any blend areas

@TonysRefinishingTV 8 жыл бұрын

+jason evans see we dont use 120 at all in our shop lol, and personally i just dont see the need to prep higher than p400 on a solid colour but on metalics ect i do prep up to p500 on the da and then do my blend panels with scotch and paste or p800 , i find the p800 gives a cleaner finsih and overall job though i have to say

@67cudaksa34 7 жыл бұрын

thanks for the education

@TonysRefinishingTV 7 жыл бұрын

+67 Cuda K/SA thanks for watching

@toshtwentythree195 8 жыл бұрын

a solid color with 240.and 400 with a DA,, what would you do with a metallic Da with a 600 ??

@TonysRefinishingTV 8 жыл бұрын

+Tosh twentythree (tosh 23) yeah mate best way to get a nice finish on a job like this i think and persnally for a solid clour i dont thing theres any point going to a higher grade, for metalics then i would finish with a 500 no higher as i just dont think theres need to and then either scotch or p800 my blend panels

@tony1798 6 жыл бұрын

Hey Tony, How are Those hook and loop disc? I was told that you can't really get a true finish blocking because of the hook and loop pad is not solid

@TonysRefinishingTV 6 жыл бұрын

honestly i find if you are carefull and stick to your way of doing it right its not an issue it comes down the process and prep

@MrProxl 8 жыл бұрын

Tony Im a big fan of your channel. I have learned a lot. I am doing a black car on a guys small budget. Do you think I could do the 240-400 and be ok on black? Thanks

@TonysRefinishingTV 8 жыл бұрын

+Dwayne ST.CLAIR hi yes i dont see why not at all , personally id maybe go 320 then 500 on black it will give it that nicer finish

@MrProxl 8 жыл бұрын

Thank you very much for the advice. I ended up going 320-600. Fingers crossed.

@TonysRefinishingTV 8 жыл бұрын

+Dwayne ST.CLAIR that will be fine mate just 400 can be abit to harsh sometimes on the colours that you want that real deep gloss on and super flat look too

@MrProxl 8 жыл бұрын

You have been a tremendous help and I look forward to your vids every time they come out. Thanks again.

@TonysRefinishingTV 8 жыл бұрын

+Dwayne ST.CLAIR thanks and it's great to hear comments like that 😊