Ford Transitt 2010 Brakes and Belts Change renovating roto's, discs and electrical repairs.

No video

Ford Transitt 2010 Brakes and Belts Change renovating roto's, discs and electrical repairs.

Рет қаралды 763

Күн бұрын

Inspection time and I need to work on the cheap van. It needs brakes and belts, some lights are out and it sqeels all the time.
The Rotors or brakes discs are badly corroded.
The trailer brakes are also bad so we can work on them as well.
I have been self funding and relying on help with all the media equipment needed to keep the channel alive, if you want to help do so by buying me a coffee, this fund is for a computer able to run editing software to improve your viewing experience.
Thank you.
Contribute here www.buymeacoffee.com/arcticrebel
Swish 1235771712

Пікірлер: 40

@thenorthener6855 Жыл бұрын

Another job well done... and it's waay more entertaining watching you piddlin' with the van than any tv-channel out there👍 All the best buddy🙂

@arctic-rebel Жыл бұрын

Thanks 👍 that has made my day. Have a great one yourself

@Annie6460 Жыл бұрын

OUR 767 is off and away for inspection! That was really fun and very interesting watch thank you Simon. And once again you made it look so darn easy. Have a super weekend.❤️🇦🇺🇸🇪

@arctic-rebel Жыл бұрын

Thank you Anne, Not everyone's cup of tea but another one off the list. Have a great day.

@HallnoutMhall Жыл бұрын

Well done again Simon. Here in the salt belt, makes things even worse on mechanics. Glad to see you continue to check things off your list before winter. Last month and my dead as a door nail thyroid has caused me to start smoking again. Atleast i get to enjoy a smoke with my coffee again. Waiting on an endocrinologists to call and im hopeful to get things figured out and get back to somewhat of my old self. Praying you get great sleep and rest. God bless and appreciate you sharing as always. Thank you my friend. Be safe. Hello Sara 👋

@arctic-rebel Жыл бұрын

Thank you Sr, the age thing is a pain in the backside. I think you brave to even admit it and it does improve the coffee experience I agree. We wish you good health and the best weekend. Stay safe my friend.

@TheBeardedCarpenter Жыл бұрын

Howdy Simon- great job doing all the maintenance. I’ve had to do the same thing with my old work truck. The tension wheel does make a noise when gone. Had to get a half inch break over bar to get it off like you did. Thanks for sharing your day with us. Hope you have a great weekend. God bless

@arctic-rebel Жыл бұрын

Hi Paul, I am not sure how long they last until they eventually seize and take the belt out but it is a relief once done. I see today the long range weather forecast for you is predicting a severely cold winter so get them jobs done while you can. Be well my friend and may all the blessing be with you.

@Alan302-05 Жыл бұрын

Thanks for another ride along. I agree with you about the heat shrink, good stuff. Our weather here has been severe. Rain, high winds, lightening. At least I don't have to go out into it anymore. Take care Simon. God Bless you Sarah and Kasper. Alan

@arctic-rebel Жыл бұрын

Your welcome Alan, if you were here I could sit you in the sawmill building. All the fun of the storm without the wet feeling! We sent our blessings and hope you have a great week.

@Alan302-05 Жыл бұрын

I'd bring coffee. lol @@arctic-rebel

@bradanderson1627 Жыл бұрын

Well did old boy ! Them bearings I just pop the seals out and pump 3-4 squirts of grease in there good for a couple of years. Yeah I’m cheep about them 🤷‍♂️ thanks for the vid have a great weekend folks.

@arctic-rebel Жыл бұрын

Thanks Brad, cheap would not be doing them at all I am sure what you give them is enough . You also have a great weekend.

@matthewnasci2646 Жыл бұрын

Like you Simon, I do my own repairs on my vehicles because it saves tons of money, and I don't trust someone else to be as careful and thorough as me. I've been burned by poor workmanship before and the only time I pay a shop is if a repair is beyond my ability or requires specialty equipment.

@arctic-rebel Жыл бұрын

Same Matthew and it is for that reason I have no requirement for a modern vehicle with computers, if a man made it I can fix it, generally. I learned what limp mode was when I was in my teens I sure as hell don't need help with that. Have a great weekend and as always Thank you.

@marksparkplug7758 Жыл бұрын

Thanks Simon, great job, grinding and wire wheeling on cast iron used to raise my iron levels after that I use a respirator. Lol. Take care have a great weekend.

@arctic-rebel Жыл бұрын

Thanks Mark, never a nice job and this was the worst I have done that I can remember. Be safe and enjoy.

@celticrider06 Жыл бұрын

Hi Simon. A lot of work to be done to keep our vehicles safe on the roads, good job you can do that work yourself. Save a lot of money not giving it to repair shops. You mentioned grease on the trailer brakes. I’m pretty sure there should be an inner seal on the brake drum. I never saw being able to slide the drum over the bearings like that. Just a thought as to why grease is spreading onto the shoes possibly. Keep up the great videos

@arctic-rebel Жыл бұрын

Thanks Dave, The inner seals looked ok but I may need to change them in the future, not driving with the brake on may also help!

@vossierebel Жыл бұрын

Success I'm sure both vehicles passed with flying colours! Took me a while to get through the video but, as always, I enjoy spending time with you... and a bit with Kasper! Greetings Sarah... I trust you're still winning at the fishing!?

@arctic-rebel Жыл бұрын

Thanks AJ, all is good and we set the cages 3 days ago and on Sunday had 50 good sized fish in one cage!

@vossierebel Жыл бұрын

Wow, that's a result!!👍👍

@williamparry9314 Жыл бұрын

No disrespect intended, however the uneven pad wear is because the the sliders in the callipers are slightly seized. split the carrier and grease the pins. The rear callipers are the worst design ever prone to seizeing. As always great work. Stay safe. Old engine oil painted on the under carriage will save her in the long run.

@matthewnasci2646 Жыл бұрын

I agree. If the caliper cannot slide freely on the pins it won't apply pressure from both sides, squeezing both pads evenly. I always remove the caliper from the bracket to inspect the sliders and rubber seals (boots). If rust found, replace. Reassemble with silicone based grease. Petroleum based grease is not compatible with rubber. Simon, you skipped an important step.

@arctic-rebel Жыл бұрын

Thank you William, I agree, in fact I was surprised they were not seized solid given the condition of the rotors.

@arctic-rebel Жыл бұрын

Your right Matthew, not the first time I have missed an important step. Maybe next summer when I do the underbody I should revisit them.

@heithdotysadventures7824 Жыл бұрын

Boom . Number 1 . Brb.. sometimes them serpentine belts can be a huge pain in the ass. If you got it down and all the parts changed out along with it. Brakes you probably work a little better I'm guessing hope you pass the inspection and have a good day

@arctic-rebel Жыл бұрын

Thanks Heith, not a job I enjoy but the results are just great. Enjoy your weekend.

@heithdotysadventures7824 Жыл бұрын

@@arctic-rebel .530 am and getting things together for pouring 7 yards of concrete and stamping it . Hope to be home by noon and having a rum and coke by 1215 😄👊👍. I hope u have a good weekend as well .

@heithdotysadventures7824 Жыл бұрын

@@arctic-rebel 7 yards later and stamped and 0 video and just a few pics 😄😔 I forgot my tripod. . And was done by 1030 and no rum and cokes yet its only noon .😠😄 but soon 👍😄 hope ur day is going or want good .

@arctic-rebel Жыл бұрын

I have done it, or this or that or whatever and a wasted opportunity. I know you did it and am sure it is great well done.

@heithdotysadventures7824 Жыл бұрын

@@arctic-rebel yeh . It came out very nice.

@herrstomell2210 Жыл бұрын

🤠👍 The Word is: Impressed! I am living too far from you. Otherwise I would use Åskilje Bil & Traktor for my car services.

@arctic-rebel Жыл бұрын

Tack, you and half the village. Ta hand om dig.

@bradanderson1627 Жыл бұрын

Sure lots of rust jacking on them rotors not a whole lot ya’s can do about that machine replace or move on works👍

@mp3625 Жыл бұрын

Try u tube Simon? Lol for your serpentine belt and pullies. Do you guys undercoat your cars in Sweden?

@arctic-rebel Жыл бұрын

Hi Dave, depends where you live, further south they use alot of salt and older cars need undercoat and much care. However; if you get a car from here or north of here they are in exceptional condition because we are either frozen solid or in summer just 2 seasons here and little or no rust as long as it does not sit in snow melt. Keep them high and they will last a long time. I have seen many 50,60,70+ year old car with no rust at all here.

@mp3625 Жыл бұрын

@@arctic-rebel kool

@mp3625 Жыл бұрын

Your Toyota isn’t running?

@arctic-rebel Жыл бұрын

The landcruiser is fine and running perfectly, I just don't have a use for this year. It is out of the barn because my Daughter has been driving it. She was born and raised in it and just loves to be in it or better still driving it. We have had it in the mountains, she can drive it there.