Ford Vehicles: ABS Module Programming Procedure

No video

Ford Vehicles: ABS Module Programming Procedure

Рет қаралды 213,094

8 жыл бұрын

BEST TO WATCH IN 1080P
A Genuine VCM and subscription is required for module programming-
www.amazon.com/...
Software License-
www.motorcraft...
For general diagnosis with VCM you can use the knock off version Here-
www.amazon.com/...
In this video we show you how to reprogram the ABS from start to finish. This is a request video but may be interesting to others to see exactly how it's done.
BSG Automotive offers Auto Repair services in the greater Chicagoland area.
Website:
www.bsgautomoti...
Facebook:
/ bsgautomotive
Disclaimer:
The information, demonstration and any content contained in this video is for informational purposes only. The user and BSG Automotive (hereinafter “BSG Automotive”) makes no warranty, express or implied, regarding the effectiveness or safety of the contents of this video. In no way should the contents of the video, including the tools used, be repeated or tried by anyone. Viewers should only seek the help of a trained professional located at a licensed auto repair shop for any fix, modification, alteration, or any change to their vehicle. BSG Automotive shall not be liable for any injury, damage, or loss to any person or property that may result from use of the tools, equipment, or any content contained in this video. In addition, there is no way to guarantee that the video is not altered or modified or is not in the final form submitted by BSG Automotive and therefore, BSG Automotive does not warrant that the video is unaltered or not modified. The links on this video to products are for informational purposes only and in no way are an endorsement of the safety or effectiveness of the particular product. Viewers understand that anything contained in this video or linked to or from this video is the sole responsibility of the viewer and in no way provides an express or implied warranty as to the safety or effectiveness of any linked tool, product, or video. Therefore, viewer agrees to release, waive, and discharge BSG Automotive or anyone affiliated with BSG Automotive, from any and all liability, claims, demands, actions, and causes of action whatsoever arising out of or related to any loss, damage, or injury, including death, that may be sustained by the viewer, or to any property belonging to viewer, regardless of whether the loss is linked to the use of the contents of this video, or otherwise and regardless of whether such liability arises in tort, contract, strict liability, or otherwise, to the fullest extent allowed by law.

Пікірлер: 159

@MAGWolf 7 жыл бұрын

This stuff makes me mad. No reason your ABS needs to have ViN number to serve its function. Its sole function is to keep your brakes from locking up and keeping your car stable in the event of hard braking. Just seems like a Dealership money sync to me.

@fercast1395 5 жыл бұрын

completely agree with you... just to get more money from the consumer. on a technical point though these modules are generic and they require to be programmed to the specific vehicle and since it works on SUV or a compact car the VIN is used to get the right software and the right data for example GVW speed ratings transmission type and so forth and so on... I am not a big fan of FORD myself but that is the way they do business so if you don't like it don't buy their products. I stay as far from Ford as possible unless I have to work on it since I am a Mechanic by trade. have a nice day!!!

@abiolamuhammed5843 3 жыл бұрын

You are right.

@JustMike2791 3 жыл бұрын

They aren't stealerships for no reason y'all

@gcposeidon0800 3 жыл бұрын

Is there any info that has to be downloaded from old module?

@ecto1259 Жыл бұрын

U can use a different used model if part number is same u will have a vin mismatch code but will work the same and the code won’t turn the light on

@ablelock 8 жыл бұрын

I have a VCM but the biggest thing about it is that Ford requires you to have software running current on it in order to use the tool and if you don't do enough business to require it constantly it will cost you a whole lot of money. And is hard to get a return on your investment. Great tool though. And for requires you to buy it at a year at a time. So I thought I would put that in there.

@aliabushaiba3754 2 жыл бұрын

thanks for the info

@TradeDiagnostics 7 жыл бұрын

Can you do a video on As Built Data, how to get it and how to load in the module you need the data for.......

@tavogranados06gmail 3 жыл бұрын

What if you install a used abs module, does anything change?

@R3NALDUS Ай бұрын

You get an answer for this?

@alfredp3247 29 күн бұрын

I'm replacing a new abs module on my fusion hybrid 2010, using forscan to reprogram, can you give ne programming instructions please. Thanks.

@michaeldavis8259 4 жыл бұрын

Could you show me how to install a EBC in a F250 that did not come with one and program it to the truck. Thank you

@The_Loading_Cat 10 ай бұрын

Nice ty for the info, here i am with a ford ranger 2015 wich is giving me head aches

@abbasalimortezazadeh3507 5 ай бұрын

Hello brother, my car is Ford Mustang v6 model 2013, the ABS brake unit module is damaged, and I got a healthy used module (the technical code of the modules are the same), after installing the module, when the computer is connected to the car I got a non-support error! Can I give this new used ABS module a program to be compatible with the car and fix it?

@eduardolima4606 6 жыл бұрын

Good evening, I'm from Brazil and here only ford dealers have access to the ids. But in the USA can anyone buy one?

@alexmayor4980 5 жыл бұрын

Can you make a video on how to reflash a used ABS Module? I had to replace mine with a used one and now I am getting a VIN mismatch code. Please Help!

@Scooter210flyer 5 жыл бұрын

ok, can you flash a used module?

@TylerHankss 2 жыл бұрын

Did you get this fixed

@jscons7424 6 жыл бұрын

Can you use passthru device to perform asbuilt data if the old abs module is not communicating, and you have new unit, can a passthru device with fmp software perform asbuilt data, transfer without vcm

@bhanutejageddada 10 ай бұрын

Hi, recently my 2006 ford showing weird behaviors ( Speedometer not working, Not more than 3000RPM, No odometer reading, ABS light on, Brake light on). Ford service confirmed that ABS module is not responding. So a local Workshop guy replaced with around 3 used ABS modules, but still its been same issue(U0121). If we connect to this Software and reprogram, will it work? Please kindly help

@viridian6903 2 жыл бұрын

What does it mean programmable parameters and as- built ?

@nicholasneri1814 2 жыл бұрын

What does a scanner need to do this I have a 01 Ford F-350 4x4 auto I changed the abs module and I need to re flash the module either take off the old module or put new im looking to buy a scanner so I can do these myself being that I have a few ford diesel trucks

@hawaiianf1504 8 жыл бұрын

Brian Great Information!! Sure wished I still had your youth and your passion for fixing vehicles is a game changer for sure. I keep coming back to re-view all of your videos - not just the ones for my truck. You have so much really important and helpful information. Thanks Again Brian. Oh, btw, if you ever do decide to come over to the islands, my wife and I have a 4 bedroom home, so we doubt you'll need to pay for hotel rooms. And you might not need to get a rental because my '09 SuperCab is all yours while ya'all are here.

@BSGAutomotive 8 жыл бұрын

+Hawaiian F150 Nice!! I am think sometime in 2016 for sure.

@TradeDiagnostics 8 жыл бұрын

I have this tool and am trying to program a second hand ABS module for the vehicle which is a 2007 BF Falcon 1 tonner. The problem is I dont have the old module to do the inhale exhale is there a way of doing it still??

@Scooter210flyer 5 жыл бұрын

Why do they not answer the questions? I just had someone bring me a 2008 Mariner, they replaced the master, lines, and abs module. then towed it to me. People should not try to fix things at home when they don't know what they are diving into. SMH Who jumps off the high dive before looking down to see if there is water in the pool???????????

@williamwchuang 4 жыл бұрын

You can rebuild using the AS BUILT data.

@doorymcfly3488 6 жыл бұрын

Had ford flash the pcm and tcm on my 2wd 04 5.4l f150 because the previous owner had replaced the abs module and i had a vin mismatch code. I still have the abs light on and a vin mismatch code. My question is... Do they need to do a spesific abs calibration or should flashing the pcm and tcm do the job?

@BSGAutomotive 6 жыл бұрын

Have them run PMI on the new module with it disconnected at first so the IDS cannot get vin information from it then once they enter the PMI process reconnect it. Then it will prompt them for the as built data to be input manually.

@doorymcfly3488 6 жыл бұрын

BSG Automotive whatever they did today worked and the truck is running great thanks for all the help.

@kidwes61 Жыл бұрын

Does this only work for brand new modules. I took one out of a different car but I can't reprogram it because it still has the information from that car. Is there a way to flash it so I can use it in my car?

@aekrot1 7 жыл бұрын

I just did a transmission conversion on my 2016 Mustang GT from Manual to Automatic (don't ask why). I am having to reprogram just about EVERYTHING and this video was very helpful to me. Thanks for taking the time to create and share it!

@afekhkhideotuogbai9991 3 жыл бұрын

Good day, i tried PROGRAMMING the ABS FROM OLD TO NEW, ALL IT SAYS WAS Module complete, does this process need internet?,but didnt show operation in processing,

@strib2746 Жыл бұрын

What if you are putting in a used module and need to change the vin that is in the memory of the used module ??

@camdog5860 7 жыл бұрын

Can you reprogram a used one? I cannot get a used one to reprogram!

@rodrigomaia2557 4 жыл бұрын

@juantaveras5261 4 жыл бұрын

I have the same problem, did You find the solution?

@camdog5860 4 жыл бұрын

Yeah you have to pull the info out of your old one before you unplug it. Just follow ford reprogramming instructions.

@kwamelewis6488 3 жыл бұрын

How do you get this software to do all of this stuff?

@alejandrovazquez7181 3 жыл бұрын

Cammie Grooms I’m currently trying to do a used abs module on a ‘12 fiesta. Would you mind elaborating on what you meant by pulling the info on the original module? I’m new to the Ford programming system and process.

@reamsfabrication5215 Жыл бұрын

Can you reprogram the vin into a used module for the vehicle you’re putting it in

@terryscott7453 3 жыл бұрын

I just recently had a used ABS module installed by a mobile mechanic In my 2008 F150. Now my truck won’t start. Is it because it needs to be programmed?

@mrflinstone2553 2 жыл бұрын

I replaced my abs module on my 2005 expedition using my autel maxisys elite by going to program module instalation, copy data ftom old module still in vehicle then scanner will tell you to install new one and done. Took less than 10 minutes

@cj1613 3 ай бұрын

Doesn't forscan do the same with obII now in 2024?

@edwinruiz2202 Жыл бұрын

Hi. It's possible to reflash an used ABS module with a FDJS subscription or it need to be a IDS package subscription?

@Twinkies79 4 жыл бұрын

Getting the brake control module on my ford explorer changed. But after mechanic replaced it. He says it marks low brake fluid. What could it be?

@billrimmer5596 8 жыл бұрын

Thank u Brian!! I am sure Ford charges a pretty penny for that program. The things required would b a laptop, the little gizmo u plug into the DCL and the program u rent for a year. Correct?

@BSGAutomotive 8 жыл бұрын

+Bill Rimmer Yes pretty much.

@1fnjo790 4 жыл бұрын

Using an Autel MS908 Elite ,Trying to do the IVD calibration procedure correctly and so far it's not working on an 04 Expedition to address the C1998 Module calibration failure code and a flashing traction symbol. The Tool says to start engine and turn wheel from one stop to the other stop. It does not say in which direction (left or right) to initiate , turn slowly? Should I Hold wheel at each stop a couple seconds? Should I Return wheel back to center position after going from one stop to the other. The vehicle is on level ground with fully inflated tires though three of the four original TPMS sensors no longer work anymore. Do you know the more specific detailed Ford instructions for doing this procedure? Thanks Brian

@NewLevelAuto 4 жыл бұрын

Full left then full right and back to center

@twincanons 3 жыл бұрын

I installed a used ABS module on my 2010 ford explorer , is this what I need to have done at a Ford Dealership to get rid of service ABS alarm and warning lights

@BSGAutomotive 3 жыл бұрын

yup

@sahilsingh3532 3 жыл бұрын

Hey I had a question I have a code u201a-57 and I tried to reprogram it with Forscan but it won’t work

@dannycarlile4797 5 жыл бұрын

Do you have to do this on a 1989 Ford ranger, I have replaced the master cylinder, power booster hydraulic module, rear speed sensor and my brake and antilock brake lights stay on.I ran the codes any got code 4 which is the rab s module.could this be a false reading. Do I have to get it scanned and reprogramed. Please help, thanks

@ivranamriadi709 5 жыл бұрын

Is reprogramming the abs module able to solve u3000:48 fault code?

@fabianjaimes6301 Жыл бұрын

Man you are awesome. However. Story short f. Explorer 2014. I changed ABS Put a new one I am no mechanic and didnt know it requires configuration. "Initial conf. Not completed" is message on scan tool. Very pissed at the moment because I live in Orlando FL and cannot find someone to do what you shows on the video. Even some dealers giving me Be because they did not installed it an some are saying it will be close to a 1000 to put one with guarantee. It sucks when you try to safe money and some places still wants to screw you over. The abs I installed is brand new original bought on line from ford itself. It sucks that they do not sell these type of parts with out loopholes even though you provide vin# which automatically should set product with right configuration. Is like when you installed a new mouse on your computer the system recognize the new hardware and CONFIGURE IT WITHOUT A FUSS. Sorry Man just wanted to vent. Again you are awesome I watch a lot of your videos. Wish you had a shop near my location.

@kronos2137 7 жыл бұрын

Good evening I'm from venezuela I have a ford explorer and it has codes p0011 p0018 p2006 and p2007 imrc you hear noise inside as if the gears were broken. The p0011 code I think you have problem vtc bank 1 and problems p0018 Camshaft Phaser bank 2 and I am not sure if I need to replace it. Please could you give me your opinion that I should do thank you very much

@mballard195 5 жыл бұрын

Do you need to leave the old module in and turn the key to the one position first before putting the old module out, put the new one in and then plug the software in?

@nikafifi8005 2 жыл бұрын

Is it compulsary to do programming after ABS pump replacement? Even replace with the used one?

@johnmc457 4 жыл бұрын

Its why I am buying a new Honda Pilot (non Ford) for the first time in my life (67 yrs). Would have bought a new Expedition a few years ago but no 5.0L available. Ford all my life but I am quiting due to stuff like this. Not reliable and mess when they fail.

@MRM-wp4gr 6 жыл бұрын

I am working on a 2003 Lincoln LS V8. I have the ABS light on..Scan tool shows DTC in ABS as C1998 which is re-calibration of ABS. Is there a way that I can do this my self without taking it to a dealer or shop? All wheel sensors are working properly according to live data on scanner. I think this is due to dropping the steering assembly to the floor for a while when removing the dash for AC evap core replacement. I have an Autel MaxiCOM MK808 ..No bi-directional control, but does about everything else..thanks

@slegsonly 4 жыл бұрын

Would you know if a 2001 Dodge Ram 2500 ABS module can be reprogrammed. Bought a auction vehicle that appears to have had the abs module replaced because it has a mismatched VIN code. ABS and Brake light on all the time.

@NewLevelAuto 4 жыл бұрын

Yes it can but only with the DRB3 .

@ivangaribogutierrez69 7 жыл бұрын

Is that the Chinese kind the one you are using?

@Carz76FAM 3 жыл бұрын

Good morning nice teaching, sir how to get to order for vcm my Ford need to reprogram...

@cherrapincroft2028 7 жыл бұрын

i have a VCM I but i dont know how to use it, please help

@Chris-eh3du 8 жыл бұрын

Brian, I actually need to do this exact procedure for my 2005 Ford Explorer with Advanced Track. The second link, did not work for me. Could you specify about how much the module, and license might cost, When compared to just taking it into the dealership.

@BSGAutomotive 8 жыл бұрын

+Chris Rippy It cost allot in the thousands. I fixed the second link but yeah unless you are going to start repairing Fords on the side it's not worth the cost.

@bobrear505 6 жыл бұрын

Chris nu

@SaadElectric700 8 жыл бұрын

please can you provide me a video how to programming bcm for ford explorer 2013 and the programming offline or online ...regarding

@BSGAutomotive 8 жыл бұрын

+Saad Hasan I don't have an explorer to show this on but the procedure is the same as the one shown in this video.

@juanantomusic9210 4 жыл бұрын

BSG Automotive how to reprogram a bcm on a 2011 Ford F-250 when you unplug the module it powers off everything Your help would be really appreciated

@AndrewEG 3 жыл бұрын

Hey mate, So when you inhale can you find and edit the file that was inhaled. Then change the VIN with hex and exhale it back into the new pcm?

@dougsanders6034 3 жыл бұрын

What are the symptoms of an abs module that just needs reprogrammed?

@SaadElectric700 8 жыл бұрын

hi dear freind i thank u for your reply to me about ABS video that u sent to me and i would like to ask u about new models because that porgramed model 2009 for example model 2013 need online right or no need online and about PCM same way for the ABS moudle or there is a diffrent between each other and i hope not bother u sorry for ask many Q and i glad to talk with u best regards

@BSGAutomotive 8 жыл бұрын

+Saad Hasan Most of the time you will need to be online to get the calibration file from the server. It will prompt you if need be.

@scotthsmith8635 3 жыл бұрын

This is great for mechanics for hire, but for us back alley mechanics and hobbyist's, why not swap out the electronic module from the old to new hydraulics piece and avoid the programming cost?

@myk3ch1chas196 7 жыл бұрын

hey muy english it's no good but i try get what i try to asked yo when i get the tool and the payment i have to pay someting else to ford about some programming por some kind of menbresia por extra charge

@danielubeda9564 3 жыл бұрын

Can I "reprogram" a "used" abs module or i should buy a new one ?

@terrenceceska4111 3 жыл бұрын

Where ca i get part to hook laptop to car computer and is ford codes free to download

@nickayivor8432 2 жыл бұрын

KNOWLEDGEABLE FordTechMakuloco Tutorial great video brilliant thank you FordTechMakuloco From Nick Ayivor from London England UK 🇬🇧

@janajanakan294 7 жыл бұрын

It's your's clone vcm2 or genuine vcm2 in this video also do need internet for programming a new module

@waeiltobgy5301 5 жыл бұрын

how get hexadecimal numbers from old module and but it into dialogue boxes in the programming ?this work if old abs ok

@NewLevelAuto 4 жыл бұрын

That's called as built programming. I've made a video on this

@rodrigomaia2557 4 жыл бұрын

Does It work on used ABS module?

@BSGAutomotive 4 жыл бұрын

yes

@samkahill2845 8 жыл бұрын

what effects does a defective ABS module have on normal braking, if any ? I drive a 2008 Lincoln Nav, the ABS and brake (emergency) lights came on, and the brakes seem to have become less responsive when light braking, the car will keep coasting, until I brake harder. any input is great. thank you in advance.

@debrad53 6 жыл бұрын

sam kahill ABS replace the old foot pumping your brake we used to do.And does it way faster per sec.

@vanessayoga7522 6 жыл бұрын

?what did you try to say ?

@GraysonBowen24 8 жыл бұрын

I had my computer replaced in my 2003 ford expedition and ever since the abs light has been on. I was told it's because the abs has to be programmed to the new computer. would this procedure work in turning my abs light off?

@nikolacockcroft8060 3 жыл бұрын

Yes my friend!

@Carz76FAM 3 жыл бұрын

Can you help what vcm work for windows 10 laptop?

@jedidiah4004 3 жыл бұрын

Can you do a vid on NGS as well?

@raymon9149 6 жыл бұрын

Great video as usual. How would one "program" a used ABS module?

@Scooter210flyer 5 жыл бұрын

Again, no answer. Can a used module be re-rogrammed? or is it one time program?

@NewLevelAuto 4 жыл бұрын

A used module can be used if the part numbers match. It's a slightly different process using "PMI" or programmable module installation procedure

@geeveeme 7 жыл бұрын

what if you replace the pump and get B2900 code ? I put the used one in and getting this error code, am i correct in looking at the vid that you have to transfer info from old to knew before you pull out the old one ?

@Pdubforever1 5 жыл бұрын

I have that same problem

@MK-cc8ih 5 жыл бұрын

I'm having this same issue. Did you fix the problem?

@ilyasnazar 8 жыл бұрын

service RSC" light with code C1991 module calibration failed can be fix by VCM cable and IDS software??

@BSGAutomotive 8 жыл бұрын

+Ilyas Nazar yes

@ilyasnazar 8 жыл бұрын

+BSG Automotive Bundle of thanks I did it the same way you said and now no more C1991 after programing the ABS module and no more DTC. My truck is Ford 2008 Explorer do I need to update the latest calibrations for other module as well and from where can I get there calibration files. Does ford releasing new calibration file to run the vehicle in more efficient way.

@hperf381 7 жыл бұрын

Customer showed up with a 2008 Edge, new ABS module already in place (and of course, ABS /Traction control lamps lit). Request is for a reflash. In the absence of the inhale data, can I just pull the data through module reprogramming, the use PMI to reflash? Just dont want to brick this new module by going at it wrong.

@hperf381 7 жыл бұрын

Found my own answer- IDS procedure says that a PMI must be completed, add As-built data, then an IVD initialization.... easy as pie ;)

@BSGAutomotive 7 жыл бұрын

Sorry I was away yeah Ford makes it very easy for sure.

@Scooter210flyer 5 жыл бұрын

@@BSGAutomotive Found my answer here, thanks...…..

@bravekate 5 жыл бұрын

@@hperf381 Can you elaborate on this please?

@bravekate 5 жыл бұрын

@@BSGAutomotive This is basically my situation. ABS already installed. Is there a way to get the info for my vehicle into the the abs module? 2009 Ford Escape.

@hamzajawed2367 5 жыл бұрын

This only works with ford only or another brands too ??

@Dirtyharry70585 7 жыл бұрын

what does it take to match a used APIM to a newer ford?

@salehalbanna5716 3 жыл бұрын

Does it need online programming or it is just offline?

@jameybarisoff 4 жыл бұрын

Does my 1995 Lincoln continental need programming if replacing? It appears faulty.

@BSGAutomotive 4 жыл бұрын

@robbandera3861 4 жыл бұрын

Ford escape 2008 XLS 2.3 FWD gas, needs to be programmed also if replace the abs module?

@brucefoley1658 2 жыл бұрын

I need BCM programmer what do you recommend?

@opexo 5 жыл бұрын

can you program a module only with ABS to have also TCS (traction control system)?

@NewLevelAuto 4 жыл бұрын

No you cannot . Traction control system includes the Engine control module as well for throttle controlling

@unknowncomic3919 2 жыл бұрын

@@NewLevelAuto if I put a used abs pump and module should it still be throwing up the same codes as it was before I replaced it?

@jjservice2288 7 жыл бұрын

is the IDS need an internet connection to program modules?

@semtex2978 5 жыл бұрын

JULIO JOSE no

@sunnyhongkong 2 жыл бұрын

Hi I want to buy this module

@kwamelewis6488 3 жыл бұрын

My question is where do you get the software from

@qwk58s 4 жыл бұрын

any ideas on code U2100:00-8A & U2101:00-0A

@nightracerx 7 жыл бұрын

Anyone know what is the Ford specified voltage I have to maintain during module programming? I have a battery maintainer and I would like to know what settings I should put, thanks.

@BSGAutomotive 7 жыл бұрын

12v or higher

@unknowncomic3919 2 жыл бұрын

@@BSGAutomotive if I install a used abs pump and module will it still throw up the same codes as before I replaced it?

@ozzstars_cars 8 жыл бұрын

This stuff isn't cheap but looks like fun to own!

@BSGAutomotive 8 жыл бұрын

+Ozzstar That's for sure.

@alexa3389 7 жыл бұрын

BSG Automotive man I need your help, I have 2006 escape hybrid 4x4, I have abs light and brake light on with brake service on the screen, I changed bother tone rings, they were broken, when I push the brake I hear the abs pump running even when the car is off, should I try bleeding brake/ abs? and does forscan do that? or is the abs module bad? if I buy used one can I program it with forscan? please help me out .

@tdrewman 6 жыл бұрын

I just click on the link for the product. You would think that after you spent $1,349 they would give you free shipping.

@carlotheatheist 5 жыл бұрын

hey.. i want to copy that code. may i put that code into arduino?

@edwardmyers1746 6 жыл бұрын

Why does this happen..... like how does it randomly become uncalibrated

@NewLevelAuto 4 жыл бұрын

Not uncalibrated , but not every bit of wear and tear can be calculated when the original calibrations are issued. Sometimes we need to expand the code setting criteria and this is done through programming

@hamodhcruz8620 3 жыл бұрын

Bro it's work on toyota?

@questions6655 4 жыл бұрын

Do I have to do that to a 2002 Crown Vic

@mcfriedchicken1972 4 жыл бұрын

You probably do. I have an 02 Ford with a Abs module fault. Doing some research, it does have to be reprogrammed. You can try Forscan for about $25 Amazon

@leahfriedman7370 8 жыл бұрын

is rsc controlled by the abs?

@BSGAutomotive 8 жыл бұрын

+Leah Friedman Yes

@leahfriedman7370 8 жыл бұрын

+BSG Automotive I've been getting sporadically a "service RSC" light and scanner showed a C1440 code (08 mountaineer ) according to forums its a failed abs sensor in the brake master cylinder. You agree thats what can cause it?

@BSGAutomotive 8 жыл бұрын

+Leah Friedman No on this truck for this code either there is air in the hydraulic system or the pressure sensor which is internal to the HCU on this year must be replaced as an assembly with the HCU.

@leahfriedman7370 8 жыл бұрын

+BSG Automotive i hear ya. So I shoukd tty bleeding the system. Thanks man, keep up the good work. Watch EVERY video, big fan

@automaticosdovale-cambioautoma 7 жыл бұрын

Fantastic!

@DavidGutierrez-zi4dy 4 жыл бұрын

EXCELLENT .

@xepiloguex 3 жыл бұрын

I really like doing my own work on my 09 Escape but this new technology makes it really hard for someone like me to do that. I dont have 25k to get all these tools and software. This is horrible. I like the older cars. At least I could work on my 95 Jeep. 😠