That's a professional video!!! Good explanation how to do it. I am beginner from Holland with a lot of open minded ideas. thanks a lot!!
@condesystems3 жыл бұрын
Thank you so much fro your kind words! Please let us know if you have any questions to help you out along your sublimation journey.
@ronhawks12773 жыл бұрын
This was the best video for information I've seen. Good job.
@condesystems3 жыл бұрын
Glad you enjoyed it! Thank you for watching! If you have any questions, please contact us directly at saleshelp@conde.com
@wisdomunderstanding90786 жыл бұрын
Great video! I have faith in Forever again, I cant wait to try these techniques
@lawandahodges30025 жыл бұрын
Great vid! Chris explained things very clearly.
@chrluc6 жыл бұрын
A really great video!
@TheWorldisSoDivided2 жыл бұрын
Great video.
@condesystems2 жыл бұрын
Glad you enjoyed it
@aliciamando2 жыл бұрын
Very informative.. great video
@condesystems2 жыл бұрын
Thank you!
@sniedrich2 жыл бұрын
Thank you for this support ;)
@condesystems2 жыл бұрын
Any time! Please let us know if you have any questions.
@ispearo5 жыл бұрын
What a very helpful vid.....Brilliant.....Thanks....Nige UK
@yvonnedugbazah1413 жыл бұрын
Great video. Thanks so much for sharing. I'm new to this. Can I use inkjet or sublimation printer? I'm using both cotton and 100% polyester shirts.
@condesystems3 жыл бұрын
Hello Yvonne, Forever no-cut transfer paper only works with toner based printers.
@11retodd3 жыл бұрын
When printing with an OKI C711WT Printer, using Forever Laser Dark Transfer paper on an all white design, I am getting a distressed look when I peel off the heat transfer from a 100% Cotton shirt. Sometimes it is ruing the design in that a big chunk of the design/lettering comes off, and thus ruining the shirt. I am super cautious pulling it off, just as outlined in your video. I feel maybe it was a setting issue when I printed the design initially or a setting issue in the RIP software?? I would like the design to be a solid white, not a distressed looking white. I am using the RIP software and had initially configured as outlined in your videos. Any suggestions?
@condesystems3 жыл бұрын
Hello R Todd! Thank you for watching our Video. For best assistance, please contact our technical support at Support@conde.com.
@davidsamuels67346 жыл бұрын
Good, Good video
@coolpetworld4 жыл бұрын
great video FOREVER . where i can get that materiel : print and paper
@scottfraze77434 жыл бұрын
So do you use a sublimation printer for this process?
@melatmekonen29093 жыл бұрын
What do you put the top of the clear paper can u please tell me the name of it please. The two papers the one you put on it.
@condesystems3 жыл бұрын
Are you talking about the finishing sheet that they use after the apply the material to the garment? If so, you can find it here dyetrans.com/details.php?item_no=SS8511XXV
@kaylacorbin64133 жыл бұрын
For 100%polyester what settings would I use?
@condesystems3 жыл бұрын
Heat Press setting should be between 250-265(F) for 30 seconds with medium pressure. Remember to allow the A-foil sheet to cool before removing.
@jonathanjaca57784 жыл бұрын
Is it compatible to any lazer copier
@daan39673 жыл бұрын
My print on on the a sheet from the printer isn't as solid as yours. It has some freckles with less color on it. But i have got a good laser printer. Is it maybe a problem that the printer hasn't got a transparent paper setting?
@condesystems3 жыл бұрын
Hello Daan, we are sorry to hear that you are having an issue with your printing. For the best support, please contact or techincal support team at Support@conde.com.
@condesystems3 жыл бұрын
Your "freckles" issue could be related to humidity. Make sure your operating environment is between 40% - 60% RH for best results. This issue could also be related to media type/media weight setting or a bad image drum (if using an LED-based printer). If a transparency setting is not an option, then select thick or heavy stock media. As long as toner is bonded to the page after printing, you should be good to proceed to the marrying/weeding step of the process.
@MsWearer3 жыл бұрын
Hi I recently bought some Koala heat transfer paper from Amazon thinking I could start printing from my Epson Stylus R3000 and I had to cut around the image. It looked so unprofessional. Once I heat pressed it and then I had to put it in the wash it came out all ripped and screwed up! Can you tell me how to create a heat transfer at home but one that I can sell? Do I need special inks? The paper you’re selling is definitely on my list.
@condesystems3 жыл бұрын
Hello Ms Weaver, thank you for watching our video. Forever No-Cut transfer paper requires a white toner printer. Here is a link to the models that we sell ----> dyetrans.com/products.php?webmaincat=laser_printer&websubcat=printer&websubcat2=oki&websubcat3=c711wt If you have questins please contact us at (800)826-6332 or Saleshelp@conde.com
@TEESCOTT3333 жыл бұрын
Thank you for this video! I may have missed it but what pressure number is your geo knight on for full color? What number for all white? I want to try it using the same pressure.
@condesystems3 жыл бұрын
Hello TNTV Crafts! Our pressure settings for this materiel can be found at the following link. dyetrans.com/search.php?search=forever
@TEESCOTT3333 жыл бұрын
Thank you so much!
@antoniaclanton73324 жыл бұрын
Can you use sublimation ink?
@rodiron3 жыл бұрын
how do we prevent glue inside of transfer sheet. Sometimes I get small spots of glue around image.
@condesystems3 жыл бұрын
If excess emulsion appears (spots around the design), it usually means you are using too much heat or pressure. Try reducing your press temperature 10-degrees first. If emulsion dots still appear, then reduce heat press pressure by 1/2 turn or 5-10 psi.
@rodiron3 жыл бұрын
@@condesystems Thank you!
@darrellhawkins97063 жыл бұрын
can you still print white with forever dark and without white toner?
@condesystems3 жыл бұрын
You can produce a "white only" design with FOREVER Laser Dark (No-Cut) LowTemp paper. However, you use a White Toner printer and you must physically print white in order to transfer the design. Here is a related video that explains the process: kzfaq.info/get/bejne/bp1jnpuJxq20eIU.html
@gorgeland20084 жыл бұрын
What happens if I peal hot??
@samjap6 жыл бұрын
Do I need white toner printer to print white design?
@leahkimberly-lowe2705 жыл бұрын
Sam yes
@Daniel-iu4ci2 жыл бұрын
Please What forever transfer paper can i use with any laser printer ?
@condesystems2 жыл бұрын
Here is a link to FOREVER Paper with a list of transfer paper products that can be used with a standard, 4-color (CMYK) laser printer: www.forever-ots.com/product-category/transfer-media/laser-printers/
@inspyre.design2 жыл бұрын
Any trick to remove a print from a garment?
@condesystems2 жыл бұрын
Contact us at support@conde.com :)
@911token2 жыл бұрын
what kind of paper are you using both papper
@condesystems2 жыл бұрын
Forever No-cut transfer papers
@bibasingh82893 жыл бұрын
What kind of printer do we need for this transfer sheet??
@condesystems3 жыл бұрын
Hello Biba! Please visit the following link to see the type of printer we recommend for the Forever No-Cut Transfer. dyetrans.com/products.php?webmaincat=laser_printer&websubcat=printer&websubcat2=oki&websubcat3=c711wt
@teeteebrown45652 жыл бұрын
What is the paper call that you guys using ?
@condesystems2 жыл бұрын
Forever No-cut transfer paper
@stephenhenderson43723 жыл бұрын
I am a beginner how do get all colours with white
@condesystems3 жыл бұрын
This printing is done with a "White Toner" color laser printer. These printers use white poly toner as the "last color down" to create an underbase white for transfer paper printing to dark-colored fabrics. If artwork is designed correctly and raster image processing (RIP) program is used, then white can be both an underbase and spot color. Popular models for this process include the OKI C711WT, OKI Pro8432WT and OKI Pro9541WT printers.
@zak48533 жыл бұрын
will it work with inkjet printer ??
@condesystems3 жыл бұрын
No Forever No-Cut Transfer paper is only recommended for white toner printers.
@janiew483 жыл бұрын
Are you putting this on cotton shirts?
@condesystems3 жыл бұрын
Hello and thank you for your question! Forever no - cut transfer paper does work on cotton shirts and is most likely what they are using in the video.
@ysaraflores3 жыл бұрын
where can i get this paper
@condesystems3 жыл бұрын
Hello Sara! Thank you for your interest in our Forever No Cut transfer paper. You can get your here...dyetrans.com/details.php?item_no=LLT-8511C
@kaileefleming57604 жыл бұрын
Where can I get this paperrrrrrrrr
@condesystems3 жыл бұрын
You can find all the products used in this video on our website at dyetrans.com/index.php
@deltafusioncloggers89073 жыл бұрын
Not sure why this transfer paper does not work for me.
@condesystems3 жыл бұрын
Please contact our technical support at Support@conde.com.