Рет қаралды 33,580
FOREVER WILL NEVER BUY SPOL TOA AGAIN‼️It's trivial, Toa quickly breaks, not from the power amplifier
It is rarely discussed about the damage to Toa or the speaker horn which is often damaged on the spol of the speaker.
Many think that this damage is caused by the power amplifier whose watts are too large...
So, before continuing, friends, you must watch it until it's finished... 😀
Here, what friends have to pay attention to is the toa or speaker toa funnel, namely the spol part of the toa speaker
If the spool is damaged, there are scratches or friction on the speaker focus wall, friends, don't occasionally immediately replace a new spol because it won't last long....
If the damage to the spol is burnt around the voic coil or spol, then you can be sure that something has happened to the power amplifier toa.
And it is possible that it was caused by the volume being turned on too loudly so that the speaker spol was burnt...
It's also important, friends, to pay attention when reassembling the toa, that is, don't screw the bolts with the outer bolts because the magnet will come off, so avoid it guys...
Okay, I hope this tutorial is useful
If friends like this video, please help like share and continue to support this channel so that it continues to grow...
Thank You
@agus. tutorial