Great video with clear explanation and demonstration - thank you!
@forevertechenglish3 күн бұрын
Glad it was helpful!
@hendrikbotes6519 Жыл бұрын
Very well explained, I'm not into electrical stuff at all, but after a explanation like this, even my child will be able to do it.
@forevertechenglish Жыл бұрын
Thanks Man
@AbdulRashidGhulam26 күн бұрын
Excellent explanation for washing machine level switch details
@forevertechenglish26 күн бұрын
@@AbdulRashidGhulam thanks
@tesfahungetahunargachew4328 Жыл бұрын
Nice and apricated your all videos but last time I asked you to tell me about types of refrigerator and the way how to cool tnx for your help
@forevertechenglish Жыл бұрын
No frost refrigerator, direct cool refrigerator, deep freezers And many more, Can't explain the cooling system on comment, it is a lengthy topic. Will make a video on it in future.
@ArtPIsMe3 ай бұрын
OMG, such a good explanation!
@williamd71617 ай бұрын
Thank you for explaining the topic in english 👍
@lazy_lasagna337526 күн бұрын
Great video,just one question,my washing machine's water level changed for some reason on one cycle,do you maybe know why?🤨
@forevertechenglish26 күн бұрын
How did it changed, I didn' got what you are trying to say, can you explain how did it changed.
@WillRobinsonDanger Жыл бұрын
Excellent!!!!! This would explain part of the 4C error code which is not filling; if the water level sensor is damaged, then this will cause the machine to automatically drain and stop operation, let alone if the machine has been restarted so many times, it will overfill. This is basically like having an EFI for washers. Learned the hard way with my Samsung Machine.
@forevertechenglish Жыл бұрын
But this basically work with air pressure, and adjust the level of the water accordingly
@hoihaihoi Жыл бұрын
Very informative and clear... Tq
@forevertechenglish Жыл бұрын
Thanks alot, I am glad It was helpful.
@mazharabbas3925 Жыл бұрын
GREAT EXPLINATION.
@muhammadrazzaq8840 Жыл бұрын
Excellent explained
@forevertechenglish Жыл бұрын
Glad it was helpful!
@2550kong2 ай бұрын
Thank you very much.
@forevertechenglish2 ай бұрын
You are welcome!
@vadimtyutyunnik353 Жыл бұрын
I'll watch all your videos!
@forevertechenglish Жыл бұрын
Thanks
@discoverneweyes Жыл бұрын
That would have confused me hunting for a switch when in reality, there is a variably resonant tank ... ie f = 1 / (2π × √(L × C)) ... thanks for that info!
@zawlwin6375 Жыл бұрын
Thank you for your very good explanation.
@forevertechenglish Жыл бұрын
You are welcome!
@JzoneMD11 ай бұрын
Well explained👍
@rolanddejesus8685 Жыл бұрын
thanks sir for sharing,God bless.
@forevertechenglish Жыл бұрын
Always welcome
@ramdanesahed93055 ай бұрын
Hello thanks for this informations are very important good job thanks 🙏
@forevertechenglish5 ай бұрын
Glad it was helpful!
@rickeykeeton47706 ай бұрын
Should any of the rattle when you shake them? I am researching the one at 5:03 with three terminals. Should the reading not change when pressure is applied? Like continuity from 1 and 3 should switch to 1 and 2 or 2 and 3?
@p.m.6845 Жыл бұрын
Excellent! If coil resistance is approximately 21ohm, between 1 and 3, is it ok?
@samithetechsavvy64858 ай бұрын
Very helpfull thanks
@eidodoos9 ай бұрын
tyvm for sharing this. great explaination
@forevertechenglish9 ай бұрын
Glad it was helpful!
@tharinduuld4 ай бұрын
Grate video
@masoudmontazery907 Жыл бұрын
Good luck sir 🎉
@16valve64 Жыл бұрын
Thanks a lot Bhai
@jermainesalares8777 ай бұрын
Clear info
@sendtodawit8 күн бұрын
Amazing
@forevertechenglish8 күн бұрын
Thanks
@chandanathanthrige42638 ай бұрын
thanks
@simonebulzomi239111 ай бұрын
Maestro.
@aqibali1297 Жыл бұрын
This's so good man you've explained very well thanks man.
@forevertechenglish Жыл бұрын
Glad you liked it!
@sknr1989 Жыл бұрын
Thanks sir
@user-mk2qx3gt2h6 ай бұрын
what do the three adjustment screws near the terminals do. I.E. what happen if you turn the very centre screw anit clcokwise ? etc can u expalin please
@totallyexplored Жыл бұрын
very nicely explained. Good job. My siemens 7kg fully automatic front load wash machine is 13 years old. The problem with it is - now it is always complaining about low water pressure with F17 error code. I checked the water pressure from inlet pipe. It looks good pressure to me. Any thoughts on what could be the problem sir?
@forevertechenglish Жыл бұрын
The Water tray could have dirt or soap scum which is blocking the water, as I have experienced it, Clean the tray, Check for blockages in the water pipes, clean the filter attached with the water inlet valve. And I think the problem could be resolved
@hariTheHuman Жыл бұрын
@@forevertechenglish sir appreciate your quick reply on this. I figured out the problem. As you said i opened and cleaned the soap tray. But the actual problem was in the water pressure here in my top floor flat. Since this is top floor, there is very less water pressure at the inlet of washing machine. Hence I added a pressure booster pump.
@SHAAHLUCKY-rp5eo8 ай бұрын
Wery good.welcome you
@aubreydonbibi42789 ай бұрын
So if the terminal 2 and 3 gives a reading that mean the pressure switch is faulty .the one for top loader with three pin.
@g.j.dutoit44474 ай бұрын
Also want to know 🤔🤔🤔
@ausseamore8386 Жыл бұрын
Thanks
@forevertechenglish Жыл бұрын
Welcome
@dedekurniawan91375 ай бұрын
1:54 got em
@g.j.dutoit44474 ай бұрын
When pressure sensor switch close water inlet valve is the pressure sensor switch wire switch on motor to wash?
@forevertechenglish4 ай бұрын
Yes the motor works after the water level in the drum reaches a level you selected. The water pressure stops the water inlet valve to flow water. And the motor receives signals to work. And start the wash process.
@g.j.dutoit44474 ай бұрын
@@forevertechenglish just want to make sure please. Is one of the 3 wires on the pressure switch send signal to motor to wash. Not a wire on water valve?
@forevertechenglish4 ай бұрын
No, the signals are passed through the circuit board.
@g.j.dutoit44474 ай бұрын
@@forevertechenglish yes that i know, but isnt the pressure switch give the signal to the circuit board after closeing the water valve. If the pressure switch not close the water valve. The circuit board will not get a signal to wash motor. Isnt it?
@forevertechenglish4 ай бұрын
Yes, What you said is correct, first the pressure switch send signals to the circuit board. and the circuit board closes it. Then the circuit board sends signals to the motor to operate.
@harshalrahman994 Жыл бұрын
👌
@HasanProd4 ай бұрын
where to buy 2 wire haier sensor?
@forevertechenglish4 ай бұрын
You can buy it from haier service center.. If one in your city.
@HasanProd4 ай бұрын
@@forevertechenglish jazakallah
@adamcolon Жыл бұрын
Yes... see deez nutz! lololol
@forevertechenglish Жыл бұрын
hahahhaha,
@ydnar71 Жыл бұрын
1:54 came to comment this 😂
@forevertechenglish Жыл бұрын
@@ydnar71 These are screws, I got it wrong, Lol..
@Time4yes Жыл бұрын
So these are basically LC circuits?
@fredericonatividad8316 Жыл бұрын
Hi sir, can you tell me about the main board cold water is not lightning only hot water ligthning what is the problem?
@forevertechenglish Жыл бұрын
Which Washer is it?
@user-hz2mw3st6u Жыл бұрын
Saan po pwedeng bumili ng water level
@rfans4 Жыл бұрын
I measure frequency are 25.xx khz durung no water pressure
@eglaaliaj19736 ай бұрын
Can you give me an explain for my laundry Samsung that take water unlimited , without end, what can happened with my laundry...?
@forevertechenglish4 ай бұрын
Check the water pressure switch or the water inlet, fault they might be faulty.
@edwinov2 ай бұрын
IMMEDIATE DISLIKE for the use of that AI voice. Shame, because the video itself is good.