Josh u helped me secure a job and take care of my family of 3 babies 🥲no BS💯 May God continue to bless you king.🙌🏿👍🏾✊🏿🤙🏾🙏🏿
@MajesticSoul17 Жыл бұрын
Where you get the license or certificate from?
@dillan5125 Жыл бұрын
@@MajesticSoul17 these days you can take it online but it's better to just look up forklift operator certification location so you can learn in person, then you take test and that's it
@twild518 Жыл бұрын
What's good eastsidetone313 This Monday coming up I will be work at warehouse with a forklift god is good because I came home 8/7/07 16 year later I'm starting a new and better job for my family god bless you and stay safe out here bruh
@redmamba46959 ай бұрын
@@twild518how's your forklift job going brother
@BD-kc9te7 ай бұрын
@@twild518 Dam bro God bless bro 🙏
@headshotnoluv32482 жыл бұрын
You make this shit so simple. Because of you I’m going $15.50 a hour to $21.00
@headshotnoluv32482 жыл бұрын
You should look into starting your own school for this.
@ceoofthen-word88492 жыл бұрын
why are you rich
@parktaejoon17772 ай бұрын
SAME!!!! but just a little more. and hoping my feet stop hurting at work! lol
@bayernfreez24952 жыл бұрын
This guy is a very good instructor.
@DJ_Shmee2 жыл бұрын
I never drove a forklift but I had a ton of warehouse experience. I applied for a forklift job I'm kinda sceptical about it but These videos are definitely making me feel more comfortable about operating one now. Thanks man.
@redmamba46959 ай бұрын
@@MattMan82 Do you think if you already drive a car you can have an easier time driving these forklifts?
@davismillz6 ай бұрын
@@redmamba4695Absolutely! It’s not as hard as you think. There is a lot of multitasking involved with forklifts because you have to operate the levers as you’re driving. But it’s not bad at all and fun if you’re into that kind of stuff.
@jakevanscyoc98262 жыл бұрын
I'm about to use my first forklift Monday at my new job. Thanks for the help man, I'm having more confidence after watching.
@ConfectioneryCorner Жыл бұрын
Can you give us an update how these videos taught you and how similar it was to the real world? Do you still drive a forklift in work? Thanks =)
@dkt_15302 жыл бұрын
Just started a job as a warehouse receiver and found out today that I have to take a forklift evaluation test first thing in the morning. Found your channel tonight and I’m way more confident now. Thanks brotha! You’re making an impact !!
@deebowman352 жыл бұрын
How did the test go??
@deebowman352 жыл бұрын
I have my forklift evaluation test today
@ilovedabsandfireworks Жыл бұрын
@@deebowman35 how did you do on it
@patrickdillon55172 жыл бұрын
I need to learn how to use a forklift my job and your videos have taught me how to in under 20 minutes. Thank you Josh, you're a legend, keep up the great work mate!
@Mianixmusic2 жыл бұрын
I needed this exactly! I told a job I had about a year experience driving forklifts but I’ve never even touched one lol thank you for your videos!
@ConfectioneryCorner Жыл бұрын
Are you still working there driving a forklift?
@jennikasanon9189 Жыл бұрын
LMAO
@4FanBatman2 жыл бұрын
You should film a typical day at work for you. That would be a cool video
@DRAGONT101X2 жыл бұрын
You explained this better than most of all the other professionals I have seen great work man thanks for the knowledge my dude great vid helped me out a lot
@jeremyloucks6662 жыл бұрын
Never driven a forklift but your videos have helped me perform tasks around the warehouse so much easier, can’t thank you enough man!
@sethwatkins5909 Жыл бұрын
My old boss stretched the truth for me to get a job paying 32.50 an hour I'm currently watching this before I start my training so grateful for these videos
@forkliftjoe3620 Жыл бұрын
That’s Great your making good money bro keep it up!
@kerryassee53097 ай бұрын
I'm from Trinidad and Tobago and I have no experience in using a forklift . I'm going to obtain my license for it but I'm at a disadvantage from the other guys who are already working with forklifts in their jobs. By watching your videos gave me a lot of understanding and insight on using it. Hoping to pass the test and getting that job I'm trying to obtain to survive. Blessings to you and excellent job in explaining the use of a forklift lift, thanks for the boost in my self confidence👊.
@woogonzales6451 Жыл бұрын
Thank you you definitely helped me out i just got a forklift job with no experience but your video’s are what helped me thank you and god bless 🙏
@jjjunggg2 жыл бұрын
Helping people from all around the world! Thanks, man
@life_with_twa77782 жыл бұрын
You helped my daughter 19 🙏
@benhall81722 жыл бұрын
That third gas forklift with a "clutch" is like a clutch but called an Inching Pedal. It works like a clutch and a brake combined (if it is connected to the brake pedal too so first its disengages drive then more pressure and it applies brakes) so that you can rev the engine while in gear to make the hydraulics go faster (like lifting the load onto a truck) but bypasses the power to the drive wheels so you can rev the engine to make the loading much faster WITHOUT driving the forklift faster. It disengages drive and engages brake (if it is a dual action) so you can quickly raise the hydraulics to lift a load up without also driving faster. Its safer and easier to keep your fork load low to the ground until you put it on the truck or racking, and this pedal means you don't have to take it out of drive to rev the engine to speed up loading. Without it, you can't rev the engine in forward gear or else you speed up so this makes loading so much easier and faster.
@NN-bv9lq2 жыл бұрын
Yup that bad boi helped out a lot when I had to stack, don’t know why people think it’s a useless pedal or just another brake comes to show they aren’t pros
@Sergelegarsducable Жыл бұрын
kzfaq.info/get/bejne/l7FhgK-FtryVd4k.html demonstration of the inch clutch @1:16
@ZachHuller Жыл бұрын
My 5 minute "forklift training" consisted of my teacher telling me that pedal was useless and then lifting a pallet off the ground and setting it down. This comment helped a lot, thank you
@TheCrawdadman9 ай бұрын
I use the third pedal all the time it is great, especially with our lift it does not like running too good in the cold mornings and full turns or tilts instantly stalls her unless you Rev it with the clutch.
@AndehXАй бұрын
@@TheCrawdadman Sounds like a blocked regulator. Alot of the gas powered trucks at my workplace have had this issue at some point. They take ages to start in the mornings. Apparently it boils down to the quality of LPG you put into it.
@elroderick68652 жыл бұрын
Thanks bro you are the best. I just watched a video u posted 2 yrs back and it was really helpful.
@robertoalvarado48192 жыл бұрын
God bless you again man, God bless you in The Lord Jesús name. Blessings for your family and your entire life.
@forkliftjoe36202 жыл бұрын
Thanks Roberto
@acidlullabyy1476 Жыл бұрын
Thank you SO much for these! I've watched so many and your videos are by FAR the easiest and most helpful!!
@forkliftjoe3620 Жыл бұрын
No problem love
@urbanrevive12092 жыл бұрын
These videos are so great I hope this one blows up too man 🙏
@rickyspanglish1913 Жыл бұрын
you’re literally helping me secure a job RIGHT NOW. Thank you 🙏
@Trainboy4522 жыл бұрын
*You're too late, Sonic! I am now forklift certified! MUHAHAHAHAHAHA!*
@presentnature34322 жыл бұрын
Thanks for information
@D.A.52 жыл бұрын
Yo bro I got a side forklift job watching your Videos! Thank you first Off! Secondly, can you do a video on how to use the clutch. We got the propane forklifts, and the trainer says that's way down the line, but gave a brief example of why the clutch is beneficial. Thanks again for every video you already put out!
@user-ku2gl3fr7n2 жыл бұрын
I love your every videos You are the best 👍🏻👍🏻🔥
@justiceawelgarson8839 Жыл бұрын
u ve solved my problems , this is justice garson from Ghana
@carlosdelacruz86652 жыл бұрын
Thanks brother passed my forklift class with these tips
@jaejae56992 жыл бұрын
I’m the only female on my forklift team ! Just came across your page and it’s so helpful. WE LOCKED IN LETS GOO 💪🏽😈‼️
@kingjosiah2020 Жыл бұрын
My guy you did it all, I really appreciate. God bless you Josh
@christinawilliams1456 Жыл бұрын
I just applied to my first forklift job as a trainee! Your videos are helping me to learn things in advance. Thanks!
@forkliftjoe3620 Жыл бұрын
You got this
@sxmaj Жыл бұрын
i appreciate and like how technical you are, you explain it all thoroughly.
@monie25142 жыл бұрын
Hi Mr. Josh, can you do some videos showing how one would get in started up on each of the different ones showing how you would pick up a load reverse and going back in the last five that you showed I think that would help out a lot. Can you also do a video showing the pros and cons of being a forklift? versus a high low driver?. What is the starting pay? What things should we better prepare for as women when driving each of the five if we ever got a job what things should we know in advance. To drive going forth to drive backwards to drive in neutral when picking up and which ones are less dangerous? 🙋🏻♀️😇😉 I would love for you to do a video and tell me when you might be able to do this. I think as women we all need to learn this I'm thinking about taking this up since it's a one-day class seems simple enough.
@cruiz920 Жыл бұрын
Thank you. I just started a new job and I needed a refresher just like this one just to reacquaint myself to the functions
@brendenrobert866 Жыл бұрын
I learn something every time I watch your videos dude.
@Aladenwsmtv Жыл бұрын
Keep doing it good job I'm watching from Lisbon Portugal
@AndehXАй бұрын
The Toyota Tonero 18 I drive at work has a clutch, and I use it all the time. It's the brake pedal that I never use. The clutch allows me to let the truck roll forward, which is useful for going round corners without needing to brake. The clutch is also always used when raising the forks. As any driver probably knows, the clutch is used to disconnect engine drive from the wheels. In a forklift this allows you to apply gas to the forks for quicker raising, without drive being applied to the wheels simultaneously. Without the clutch, I would have to bring the truck to a complete stop and apply the handbrake every time I wanted to raise the forks or put the truck into neutral, which, while safer, and is to industry standard - is not productive at all, and would likely get you fired for being too slow. The clutch is key to fast and productive workflow on a gas powered truck.
@Carioca4335 Жыл бұрын
the forklift man once again doin it.... thanks man
@gunjan1832 жыл бұрын
Thanks man for this nice video...
@jamesgaudryjr82 жыл бұрын
I need to learn the standup crown forklift reach truck
@jamesgaudryjr82 жыл бұрын
You taught me more then I knew yesterday though best way of explaining things
@forkliftjoe36202 жыл бұрын
I have a stand up Raymond video
@CharanjitSingh-dv5sn2 жыл бұрын
Joshua well done Bro for such a wonderful video,explained nicely
@Gentleman92McKinney2 жыл бұрын
great video man lots of help
@angelsalas5769 Жыл бұрын
I learned how to drive a forklift off this dude and got a good job Thanx bro👍🙂
@gvny882 жыл бұрын
Blessing everyone with knowledge thank you bro
@nonwibb2 жыл бұрын
heyy rock on, you're back. keep at it man 👍
@ousmandeomande755 Жыл бұрын
I really appreciate your teaching videos thanks a lot
@christinalee7985 Жыл бұрын
omg! thanks so much for your easy to understand lessons. I'm starting new job with forklift training, and I wanted to know a bit before I started. Thanks so much. I did drive tractor trailers, certified cdl a but never did forklifts. Thanks so much, your a great teacher!!
@apocgaming150711 ай бұрын
Helped me secure a job for myself God bless 🙏
@reynaldorizo55732 ай бұрын
Thank you bud . May the lord blessed you with health brother
@LaChriszy-hj6kw10 ай бұрын
thanks so much for these video am great may you live long man 🙏🙏🙏
@westwardmonk6122 жыл бұрын
Thank you my brother Iappreciate your teachings
@smackroscoe7 ай бұрын
Well done Sir! Clearly explained & highly appreciated!
@nwodofrancis2348 Жыл бұрын
I already subscribed to your channel all the way from Nigeria
@forkliftjoe3620 Жыл бұрын
Thank You Francis
@nunugomez75853 ай бұрын
Thanks so much I love using that clutch more than brakes. You help alot so thanks your awesome.
@kaitlynnwilloughby2783 Жыл бұрын
I’m so nervous I’ve never drove a forklift before I’m about to have a job that involves that these videos are making me feel better about it thank u so much for making these videos
@drkana7211 Жыл бұрын
I surely appreciate you, bro. If you know anything about how to work the gears for a slip sheet, clamp, PLEASE show a video for that, thanks again.
@user-wu8ru4tj7p Жыл бұрын
I feel certified now thank you
@jhinson202310 ай бұрын
Thank you can wait to take the forklift class. 👍
@forkliftjoe362010 ай бұрын
Hope you enjoy it!
@irishgeddes1860 Жыл бұрын
Bro ur very good in teaching i hv been watchn ur video's and i can say i can drive the forklift without experience make more videos keep it up the good job
@elec-mechsafetyandloadsens60052 жыл бұрын
☑ NICE THOROUGH EXAMINATION - GOOD GOING MAN!
@forkliftjoe36202 жыл бұрын
Thank you!!!
@irishgeddes1860 Жыл бұрын
Im going to drive forklift tomorow even without taking a training i understand all this thanx man
@melpineda76352 жыл бұрын
I stay watching your videos man🔥just started my job about a week ago…learned it all ,except I scraped a wall with the forklift (the back heavy part) i guess i misjudged how big the machine really is…
@monie25142 жыл бұрын
Can you also do a video on the different stand up high low or forklift showing people the different gadgets that they need to use.? Can you do a video that lets people know what should be the standard going rate in terms of pay. I'm in Michigan and I see companies starting as low as 11 to 13 an hour. And then they make it seem that they're doing you a favor if they pay you 15 ,16 dollars an hour. 👎🏼🥴🤷🏼♀️😒😤 What are some of the do's and don'ts when you are in a stand-up forklift what is the difference of the gas powered versus electric?? Thank you for doing these videos 😇🙋🏻♀️👌🏼🥰🎊😎🍷💯‼️
@forkliftjoe36202 жыл бұрын
Keep posted I got you bro
@WithoutReward Жыл бұрын
Bless you man… you help me past
@luccimartian2 жыл бұрын
I see you back at it 💪🏾
@forkliftjoe36202 жыл бұрын
Yes sir Cuz tryna see what the good lord can bring my way lol.
@luccimartian2 жыл бұрын
@@forkliftjoe3620 I definitely feel that
@stevedouye12487 ай бұрын
Your a good teacher and God bless you
@sashabogdan28472 жыл бұрын
many thanks. Thats for help! and keep up !
@TwistedSag152 ай бұрын
Real life superhero appreciate you bro
@rastalife31772 жыл бұрын
Love the way my Boi says the gas lol if u know u know
@devinwalker34562 жыл бұрын
Aye bro your videos the truth , I appreciate the well explained knowledge 💯‼️
@summergbl86112 жыл бұрын
Please do a standup video!!
@forkliftjoe36202 жыл бұрын
It’s coming next week
@soyimparable3111 Жыл бұрын
Thanks brother. For sharing you knowledge.
@forkliftjoe3620 Жыл бұрын
Anytime Carlos
@globaldictator992 жыл бұрын
Awesome content! keep up the good work! 🙏🏽
@BryankumbirayiMatimba6 ай бұрын
Good bless you my man..ur voice is always telling wat to do wherever I'm about to do the wrong thing ...stay blessed
@forkliftjoe36206 ай бұрын
😂💯💯💯
@CstirTheNobody3 ай бұрын
Bro Josh is a fucking real one.
@shaaficimaxamedaxmedshaafi96672 жыл бұрын
Thanks pro 👍
@CabinCruiser2 жыл бұрын
I would have to disagree with you Joe about the clutch pedal on the LP unit as it is also a brake, sort of like older tractors and lawn tractors with one clutch brake which is the ONLY brake pedal. If you're in a hurry like most lift drivers will be at times, you'll always use that clutch/brake and never use the center pedal. You will always use engine RPMs to raise your mast faster, and slip clutching while you switch your shift lever to the opposite direction of travel while you're moving. I'd really like to know if the single wide brake pedal on that other unit actually clutches as well as it is made to use with either the left or right foot. They also call it the "inching" pedal. 🤘
@6parim2 жыл бұрын
is it really that easy to drive the forklift?
@forkliftjoe36202 жыл бұрын
Absolutely
@pokedude104 Жыл бұрын
You can use the clutch when you're lifting something up high so you can give gas for more lift speed without going into neutral. Then you don't have to wait like 30 seconds to get all the way up to the top racks. Good video though. Don't be afraid to get forklift certified people, there's some good paying jobs and its honestly easier than driving a car you will get the hang of it in no time.
@claudydesryjacques9583Ай бұрын
thx bro for ur forcliff video, they help me alot
@ajaybirsinghsandhu6001 Жыл бұрын
Great content joe
@adcu4662 Жыл бұрын
Thank you we love you I'm coming back to let you know I passed the the test and got that 3 extra bucks added
@forkliftjoe3620 Жыл бұрын
🍾💪🏾💪🏾💯
@forkliftjoe3620 Жыл бұрын
Congratulations
@forklifttechnicianguru51262 жыл бұрын
👍🏻👍🏻👍🏻 Good
@forkliftjoe36202 жыл бұрын
Thanks Guru that really do mean a lot!!
@565882 жыл бұрын
Thank you!
@kenzo10992 жыл бұрын
I’d say the clutch is good for small movements as it also inches your forklift if u need to make small adjustments when destacking but other than that he’s right u won’t use it
@reinaldotragnone54492 жыл бұрын
Thanks brother
@kennystewart7030 Жыл бұрын
another great video!
@pawgs8126 Жыл бұрын
that clutch is much faster to use than to keep throwin it in neutral
@JeanChritz Жыл бұрын
Thank you Joe, this was very helpful
@ValdeezyTV2 ай бұрын
i appreciate it Josh! Great video man frfr!!
@calebdynamicsolution Жыл бұрын
Wow Nice job bro for awesome teaching. May God bless you Sir. Please Sir can I get a certificate from you Sir. I really love your explanation. Thank you so much
@calebdynamicsolution Жыл бұрын
Please i reply need a certificate
@michaelmcgehee59322 жыл бұрын
Good videos. I wish they were more consistent though. So, I'm certified and I seem to remember something about with the propane forklifts, unlike the electric ones, you have to be in neutral to move the forks at all and are required to use the accelerator to move the forks along with the handles. Can you speak/make a video on that that is more indepth? Also, and this is a huge one that I'm not seeing anyone talk about. The principles seem quite easy, but I found in my 30 minutes actually operating a forklift, I found it very hard to see where the heck the forks are; angle of tilt, getting the forks into the pallet and clearance. What should an operator look for to see these things? All I saw was a huge block of metal obstructing my view and I find that's the harding thing to overcome. Thank you for your reply in advance.
@deepvoid34042 жыл бұрын
Helpful information 👍
@Wadanolasho Жыл бұрын
You’re certified legend for this brother 🫡
@jevarischambers7822 жыл бұрын
I've driven gas and electric with the gas I find it easy to drive while using the clutch and the gas
@dazedapparition78456 ай бұрын
Thank you so much. We just got a new forklift and the 3rd pedal really confused me. Where we are at, we use forklifts to move my mother in law from room to room.
@thetoxic1 Жыл бұрын
Definitely goin for the forklifts asap
@ERIKOWNSYOASS Жыл бұрын
Thank you bro finna get this job & keep it 🦾
@user-cq3jy1ib2i Жыл бұрын
Thank you for your help bro I got certificate but I never drive I will try to find a training
@TayDay74 Жыл бұрын
Yooo I just got a job off watching your videos . Thanks for your help 👍