Fortress 2 Gallon Ultra Quiet Air Compressor

Fortress 2 Gallon Ultra Quiet Air Compressor - Features and Review

Рет қаралды 28,425

Күн бұрын

Fortress 2 Gallon Ultra Quiet Compressor - Features and Review. My newest addition to my shop and I love it! The Fortress air compressor is super quiet, portable and has really good cycle times. I give you a close look at all the features this compressor has to offer. Don't forget to check out my Amazon Affiliate links below. Subscribe for more Airbrush tips, tricks and "How To's". It is my goal to help you speed up your learning process by having you avoid the mistakes I have made by trial and error. I also want to help you make some "Do It Yourself" accessories for around your Airbrush shop to make your project easier and save some money.
As an Amazon Associate I earn from qualifying purchases.
Web Site: theairbrushgarage.com
Fortress 2 Gallon Air Compressor
www.harborfreight.com/merchan...
Iwata Eclipse hp-cs: amzn.to/3l32fnf

Пікірлер: 126

@80swerethebest Ай бұрын

Thank you for demonstrating clearly what I have been looking for. Just a frivolous note, the Subscribe arrow is misspelled on perimeter during video.

@carlossolis9933 Жыл бұрын

Just bought this compressor as an open box for under $100 and this thing is quiet! Can’t wait to use it after watching this video!

@TheAirbrushGarage Жыл бұрын

Carlos, good luck with it. I love mine. Happy New Year.

@unklbuk1 2 жыл бұрын

Recently just bought the same one. It's by far the best I've ever used.

@notwrkn2mch 9 ай бұрын

Best review out there..... I purchased one recently and it's still in the box. Looks like i made a great choice

@TheAirbrushGarage 9 ай бұрын

Thanks for the nice comment, Joe. I am glad you liked the video. Thanks for watching, and good luck with the compressor.

@str8edgeify 2 жыл бұрын

Have the same compressor myself and love it. It is definitely quieter than most people even speak. My garage is directly below my master bedroom and needed something very quiet to not wake the wife in the middle of the night. Even when awake she has never heard it upstairs.

@TheAirbrushGarage 2 жыл бұрын

Aaron, great information for other viewers. Thanks for sharing and watching.

@JB-sx3db 2 жыл бұрын

Thanks. I’ve been looking at these.

@John-oj5km Жыл бұрын

Outstanding review! Currently shopping so this was so helpful. Keep on posting!

@TheAirbrushGarage Жыл бұрын

John, it is nice to hear you found the video helpful. Thanks for the comment, and thanks for watching.

@richardbuck1596 2 жыл бұрын

Thanks for the great video and information

@vsar1938 2 жыл бұрын

Really well formed video. Thank you. Will wait for it to go on sale and pick one up. The quietness is just so important. Especially in an enclosed room.

@TheAirbrushGarage 2 жыл бұрын

V Star, Inside Track Club, Harbor's yearly membership ($40) well worth it if you shop at harbor Freight has it on sale for $160. This sale is usually at least once a month. Thanks for the comment and thanks for watching.

@SergeCruso Жыл бұрын

I'm sold! Thanks for the review for 1 and 2,gal variants

@TheAirbrushGarage Жыл бұрын

Cruso, I love mine. Best compressor I ever had for the airbrush. I have mine (2 Gallon) for about 2 years now and it still runs great. Good luck with yours.

@Eubanksproductions 11 ай бұрын

Thanks for the informative video

@anna_doll Ай бұрын

Great Video… You Sold Me… Gettin’ One Tomorrow..!!! 😛

@TheAirbrushGarage Ай бұрын

Anna, I have mine about 3 years now and still living it. Thanks for the comment, and thanks for watching.

@SinCityDeliveries Ай бұрын

When I use mine it won't hold the tank pressure, am I doing something wrong?

@TheAirbrushGarage Ай бұрын

@SinCityDeliveries are you saying that when you spray the compressor doesn't cycle?

@kimers12660 9 ай бұрын

Thank you for creating an informative video on this compressor for airbrushing, I have watched a lot of videos, and I believe this one is one of the better ones.

@TheAirbrushGarage 9 ай бұрын

Thanks, Kimers. I am glad you liked the video. Thanks for the comment, and thanks for watching.

@PhunkyMunk 23 күн бұрын

Great review!

@TheAirbrushGarage 23 күн бұрын

Thanks, Jesus. I appreciate the feedback, and thanks for watching.

@blownmouse 2 жыл бұрын

Bought this compressor a few months ago. Love it. It works great.

@TheAirbrushGarage 2 жыл бұрын

Keith, thanks for sharing your experience with the compressor. Other viewers will find that helpful. Thanks for watching.

@Johnny_Electronic Жыл бұрын

Nice review. I saw another review a few years back on this and replaced my old pancake compressor with this one. I like that I can do airbrushing as well as run nailers and other air tools.

@TheAirbrushGarage Жыл бұрын

Johnny, I only have used it to airbrush and I do really like it. I have had very good luck with it. Thanks for the comment and thanks for watching.

@tyreewhite6653 Жыл бұрын

Thanks !

@HVACRTECH-83 Жыл бұрын

Wow really nice artwork buddy. Very impressive. Wish I could airbrush like that man 👌

@TheAirbrushGarage Жыл бұрын

Bryan, thanks but you can. It just takes some time and practice. You'll get there. Thanks for watching.

@dushanepowell3782 2 жыл бұрын

Great review. I live in an apartment complex and I need something quiet and this looks like it will fit the bill.

@dancuccurullo8453 2 жыл бұрын

Dushane, It certainly will. Your naibors are more likely to hear your sterio or tv lol. If you are putting it on a hardwood floor put a throw carpet or a rubber mat under it. This will also help absorb any vibration or noise. Thanks for the comment and thanks for watching.

@danielerickson3391 Жыл бұрын

Have it love it

@stevemeschede12 Жыл бұрын

I’ve had mine for over a year ❤it.

@TheAirbrushGarage Жыл бұрын

Thanks for the comment Steve. That will be helpful to other viewers.

@kennethrich2107 Жыл бұрын

Based on this review, I ran out and purchased today. Thank you sir.

@TheAirbrushGarage Жыл бұрын

Kennethh, I use mine every day and love it. I think you made a great choice. Good luck with it. Thanks for watching.

@the250mikec Жыл бұрын

Coolness

@NotNowLater 2 жыл бұрын

You also have a lock ring under the pressure regulator knob. Its the red ring which twists to butt up against the top knob.

@dancuccurullo8453 2 жыл бұрын

Dash, good info. Thanks for the comment and thanks for watching.

@stuffstuffstuffyay 2 жыл бұрын

Very cool! I need 2.2 cfm to run my new mini air gun- shame! So nice and portable.

@HVACRTECH-83 Жыл бұрын

This will work fine then. This is 2.1 and that .1 difference won't be a problem

@vladimirlopez7840 2 жыл бұрын

I bought this compressor this morning based on your review. It is very quiet. I’m new to airbrushing I hope I order the right reducer fitting from Amazon to connect my air hose.

@TheAirbrushGarage 2 жыл бұрын

Vladimir, very cool. I hope you like the compressor as much as I do. Good luck with it. Thank you for watching my videos.

@xxbangbang55xx Жыл бұрын

What parts did you order from Amazon to connect your hose to it? I’m having some trouble locating what I would need

@Nosferatuklown 2 жыл бұрын

the voice over when you said "45 seconds" and " one minute and 35 seconds" is hilarious

@humacao01 2 жыл бұрын

You should have sang us a few songs while running the timer.....lol. I do believe this will be my next purchase. At $130 these are a bargain and very well reviewed especially by professionals such as yourself who know what you are reviewing. Thanks so much.

@TheAirbrushGarage 2 жыл бұрын

Humacao01, lol. Thanks for the kind words and thanks for watching.

@144928 2 жыл бұрын

I just bought this compressor for running an airbrush. it is Much Louder than I expected. I have the one gallon Fotress which I am delighted with, and intend to keep. The one gallon will be handy for going outdoors on the back patio to paint models, with enamel paints, etc. I wanted the 2 gallon to stay in my art room. But it sure does shake the floor...I am sure that I am going to return it. I am glad you made this nice video, it taught me a lot, but I can't cope with the noise and rattling.

@TheAirbrushGarage 2 жыл бұрын

Michael, did you try putting it on a piece of carpet or a rubber Matt? This should make it quieter and stop the shaking. The one gallon is a great compressor I like it as well but I do like the longer run time of the two gallon. Thank you for the feedback and thanks for watching. Much appreciated.

@144928 2 жыл бұрын

@@TheAirbrushGarage Yes, I have a brand-new package of exercise mats four layers deep still in the wrapping, I put the compressor on it and ran it again. Still just crazy loud. Be-it-known I am sensitive to loud sounds, and I ran a cell-phone app to measure the sound level. It told me that it was operating at 70. I would have to put this tiny monster in a closet and run an extension hose to be able to put up with this noise.

@__WJK__ 2 жыл бұрын

@@144928 - Thanks for sharing this information, a dB meter is the only way to truly compare and know the noise level between different air compressors, especially seeing how noise tolerance and expectations vary greatly between people's situations and surroundings. Testing noise levels without a dB meter is similar to trying to tune a musical instrument without using a tuning fork or an electronic tuner, point being, without some kind of standardized measurement, guesses, assumptions and biasses begin to creep in.

@hardtymz2517 8 ай бұрын

@@__WJK__yea I agree. The video had no sound pressure measuring and that’s a no no for testing anything “ultra quiet”. It might be quiet to so many because old compressors obviously blew their ear drums out after using them for years. 70db is getting close to ridiculous loud. HF sells a tiny compressor just for airbrushes and it’s mad quiet! Also Db meters are dirt cheap. If it was 60db it would be closer to be acceptably worth the extra money it was charging for that feature. But 70 is almost a deal breaker.

@trevorwesterdahl6245 2 жыл бұрын

I also bought this compressor and think its GREAT!. Its quiet, refills quickly, and offers many more uses than what it can do with an airbrush. I refill my car tires, bike tires, use an air attachment to blow-off/clean areas, and its good enough for low-volume tools like small nail guns or staplers. IMHO... don't get the 1 gallon version. I do suggest, like others have, to add a hose between compressor and water trap to allow air to cool and have water trap actually work. I use a 25ft coiled hose. If trap is attached directly to compressor its basically not doing anything. If I really didn't like noise, I could place outside and run hose to inside though a window or make a wall plate and run through wall, but its was much quieter than I expected and its noise is not a problem for me. If you want super silent or noiseless, they are available, but much more expensive. Most of the normal airbrush compressors are louder and not nearly as good. IMHO: never use any tankless compressor.

@TheAirbrushGarage 2 жыл бұрын

Trevor, great review. That will be helpful for other viewers. And I agree, no thankless air compressors. Thanks for watching.

@NotNowLater 2 жыл бұрын

True the 1 gal. version doesn't have enough capacity for most jobs.

@hardtymz2517 8 ай бұрын

@@NotNowLater”.7 cfm at 90 psi” sounds just downright scary and wrong. Worthless.

@t54760 2 жыл бұрын

Add me to the list of people who are happy with there's. I bought the 2 gallon a few weeks ago because of all the good reviews including the one you did Dan on the 1 gallon back in April. This compressor is a really good fit for me and where I use it. Have a few hours on it now and it has given me zero issues. There is one part of the design that bugs me though. Not a deal killer by any means but I'm going to have to do something about it. Oddly enough it is one of the features you liked, the drain valve placement. Yes, it is out in front but it is not plumbed to the lowest point of the tank. If you drain with it sitting level there is still a lot of moisture left in the tank. To get all of the water out you can't just rotate the entire compressor the approximately 40 degrees needed because the valve will hit the floor. You have to lift the tank, put the back part of the compressor on the edge of a bench or table. This will let you rotate the tank enough to thoroughly evacuate the moisture without the drain valve hitting anything. You shouldn't have to go through this at the end of every session. I'm thinking about welding up a cradle that the compressor sits into. It will keep the tank rotated so the drain is at the lowest point and give easy access to turning the valve. Like I said I'm very pleased with this compressor it's just this one balancing act you have to go thru at the end of each painting session that needs fixing. Maybe I'm the only one that can't walk away knowing there is still water in the tank. I've been bitten by that with my shop compressors when doing full resprays on cars and RV's. If anyone else has a method or idea please let us know.

@TheAirbrushGarage 2 жыл бұрын

Tom, Glad you are enjoying the compressor and thanks for sharing your experience. It's feedback like that really helps other viewers. I really appreciate your support with the channel.

@davidknight133 Жыл бұрын

But since it’s an aluminum tank it won’t rust, right? Agree it would be nice to have it empty but is there risk of damage by leaving it?

@t54760 Жыл бұрын

@@davidknight133 It won't rust but Aluminum forms an oxide layer in the presence of oxygen. Ever seen bright shiny aluminum that has gotten dull and when you run your fingers across it you pickup a little powder? Besides this oxide it's just not a good idea to be spraying paint with pressurized air that has excessive moisture. Even with a water separator and filter located down stream of the tank it goes against the idea of clean / dry air.

@sglee4708 Жыл бұрын

Hey buddy I'm new to your channel and I really like your info I was just wondering if your air compressor is still working good

@TheAirbrushGarage Жыл бұрын

SG Lee, yes! I love my compressor. I had it for a couple of years now with no problems. Just keep in mind that you can get a lemon for anything you buy. Harbor offers a same day full replacement warranty. Thanks for watching.

@ProspectorsGhost Жыл бұрын

Just letting you know that - I just checked the Harbor Freight website. At this time (11/5/2022), the price for the 1 gallon Fortress Air Compressor is $159.99 and the 2 Gallon Fortress Air Compressor is $189.99.

@TheAirbrushGarage Жыл бұрын

1880, yes, they go on sale all the time for 20 dollars less, and if you are an inside track member, 30 dollars less. And yes, unfortunately, everything has gone up. Thanks for the comment and thanks for watching.

@tomdelaney19464 Жыл бұрын

Very informative, what fittings did you use to convert airchuck to airbrush hose?

@TheAirbrushGarage Жыл бұрын

Thomas, this here is a link amzn.to/3LyNu7f for a 1/4 to 1/8. The fitting at the compressor is a 1/4 here is a link for the compressor fittings amzn.to/3RSMA7K thanks for the question and thanks for watching. Hope this helps.

@tomdelaney19464 Жыл бұрын

@@TheAirbrushGarage thank you, I looked at this at Harbour freight down the street from me and the employee who insisting on helping me was not,lol

@eheheh3263 2 жыл бұрын

You have probably heard of the Super Silent 50-TC 1/2 HP Air Compressor, do you think it’s worth the high price or the fortress is more than enough and at a cheaper price? My thing is the noise... I want the quietest one and the Super Silent one is 40 dba... 20 less than the fortress but does it make a big difference?

@TheAirbrushGarage 2 жыл бұрын

Eh, the Fortress is quiet but not as quiet as my master airbrush compressor. 20 dB is noticeable. The Fortress is definitely more than enough but if having the quietness is what you ate looking for you probably will have to spend the money. If you have a harbor freight near you, you can go in and try the one on the floor. This way you can hear it and then decide. Hope this helps. Thanks for the question and thanks for watching.

@joebarry8979 2 жыл бұрын

are you able to continuously spray @ 30psi while the compressor goes into recovery mode & fully recovers while still spraying @ 30psi w/o output pressure dropping the whole time, can you try?

@TheAirbrushGarage 2 жыл бұрын

Joe, I will take a close look for you and get back to you. I have never noticed a drop but I will verify.

@beeperbugs6535 2 жыл бұрын

We're in,watch + sub!😎🖖

@TheAirbrushGarage 2 жыл бұрын

Beeperbugs, thanks. much apriciate.

@kennethnavas 11 ай бұрын

Hi, I really enjoy your videos. Could you please send me a link to where I can buy a water trap like the one you have connected to your hose? I would also like to know the brand and model of your old compressor. Thanks,

@TheAirbrushGarage 11 ай бұрын

Hi Ken, Here is a link for the water trap amzn.to/456f6sG.

@TheAirbrushGarage 11 ай бұрын

And Here is a link to the video with links kzfaq.info/get/bejne/eMqogrqFysyXZoE.html

@TheAirbrushGarage 11 ай бұрын

And...one more. Here is a video on my compressors before I got my Fortress. kzfaq.info/get/bejne/jd2oddp6tMmpdWw.html

@CrowemagModelWorks Жыл бұрын

What adapter do you need to use an airbrush with this unit?

@TheAirbrushGarage Жыл бұрын

Jesse, here is a link to that very question. kzfaq.info/get/bejne/idmbnbuCvciXoqc.html there are links to all parts in the description of the video. Thanks for the question. Hope this helps.

@jallred2 2 жыл бұрын

Hi I just bought this based on your review can you tell me the reducer coupling size for a standard AB hose? Thanks and keep up the vids!!

@TheAirbrushGarage 2 жыл бұрын

JAllred2, Great choice on the compressor, good luck with it. The fittings are 1/4", so depending on what airbrush hose you have will depend on what you will need. I have hoses with 1/8" on both ends so I needed an adaptor that went from 1/8" to a 1/4". Some hoses already have a 1/4" on one end and 1/8" on the other. Here is a link to the compressor fittings amzn.to/3NrmfuX Thanks for the question and thanks for watching.

@jallred2 Жыл бұрын

@@TheAirbrushGarage Thanks for the reply. I've been happy with the compressor but have noticed that the tank pressure does not equal the output pressure regardless of how much pressure I have in the tank. the output stay at about half. Could I have a tiny leak somewhere. This started about a month after I got the compressor. I airbrush just about every day, Thanks!

@TheAirbrushGarage Жыл бұрын

@jallred2 I'm not sure I understand. You have your output pressure set at say... 27 psi at your regulator and when you spray it goes down?

@jallred2 Жыл бұрын

@@TheAirbrushGarage Hi, The tanks pressure gauge says 120PSI the outlet pressure says 60 PSI. Half the the output. It stays constant at 60 when I spray but wont rise above that no matter how much I increase the tank pressure using the regulator dial. Is that normal, thanks.

@TheAirbrushGarage Жыл бұрын

@jallred2 ok. The tank preasure is always going to go to about 120. Now the regulator dial should let you set it at whatever you want. Now. There is a red lock right under the black regulator knob. Make sure that is turned all the way down (lose). That is a stop for the regulator.

@cjadams7434 2 жыл бұрын

Do you have a link to the inline water trap?

@TheAirbrushGarage 2 жыл бұрын

CJ, here's the link. amzn.to/3QEhjW0

@jamesdyer7535 2 жыл бұрын

what about testing it at 60 psi, most t-shirt artist shot at 60-65 psi, because of we want the color to saturate the shirt..

@TheAirbrushGarage 2 жыл бұрын

James, the compressor will handle 60 to 65 psi but the cycle times would be shorter. I apologize, I didn't mean to leave the siphon artist out. Honestly I would probably move to the 4 gallon at a minimum for that type of pressure just for the cycle time. But compressor would not be very portable. Thanks for the comment and watching.

@eyesquish485 Жыл бұрын

Do you think this compressor would run a small HVLP gun for modelling?

@TheAirbrushGarage Жыл бұрын

Eye, it probably won't meet the specified cfm that the gun is speced for, but with that said, as long as you are running a 3/8" compressor hose and you are doing small project like modeling it will work fine. I run my Paasche hvlp .8 for small projects with it, and it works well. Hope this helps.

@douglundy5755 Жыл бұрын

I want the compressor for a dive system and the air output is more than required. Looks like a good fit for me. People are using the b a u e r cordless from Harbor Freight but I don't want to be charging batteries continually. This looks like the next best option. I tried to DeWalt cordless and it was hopelessly defective and then the DeWalt Service people did not speak English and were even worse than their product! Harbor Freight to save the day!

@TheAirbrushGarage Жыл бұрын

Doug, I have mine for a few years now, and it still works great. Thanks for the comment and thanks for watching.

@douglundy5755 Жыл бұрын

@@TheAirbrushGarage I just tried the compressor with the air hose and regulator and it refills very fast and provides plenty of air, very solid little machine, and super quiet.

@hardtymz2517 8 ай бұрын

Dewalt hasn’t been “a thing” or good since like 2000-01ish. It was because the army and blonde women on HGTV used them. Not a great combo as a selling point. It fooled most people though. They used to make unbreakable tools, now the tools just don’t work in the first place. It’s Milwaukee here. Never had a tool/battery break or die yet.

@barbaracushing7476 Жыл бұрын

It seemed like not much use time between the one gal and the two gal - both a little over a minute of constant air...do you still use this air compressor?

@TheAirbrushGarage Жыл бұрын

Hi Barbara. Yes, I use the 2 gallon for all my airbrushing. I've been using it for about 2 years now, and I love it. It's pretty quiet, but best of all, it does not run hot, so I have absolutely no moisture problems, and it holds very consistent pressure. Harbor freight also offers a no hassle warranty that if something goes wrong, you bring it back, and they give you a new one. I never had a problem, but you never know. Hope this helps. Thanks for the question, and thanks for watching

@mannyfnsc29 9 ай бұрын

Hey, I just purchased the 1 gallon Fortress and with an airbrush at about 35psi I only get about 15 seconds before it refills. There are no leaks anywhere. I saw your review of that model and you got about a minute. I'm guessing something is wrong with mine? Thanks for any help!

@TheAirbrushGarage 9 ай бұрын

Hi Manny, the test was done at 27 p.s.i. that is my typical spraying pressure. So at 35 p.s.i the take will drain quicker. I bought that for a relative and he loves it. I have the 2 gallon in my shop. Both perform the same except for the cycle times.

@Deerslyr81 Жыл бұрын

Is it still kicking?? I’m getting started with my bday money and wondering if it was still worth it! Thanks! 🤜🤛👍🙋🏻‍♂️🤷🏻‍♂️🤦‍♂️🌿

@TheAirbrushGarage Жыл бұрын

Deersly81, Yes it's still kicking, I use it as my exclusive airbrush compressor. If you want extra protection against buying a "lemon" because that can happen with anything we buy. Harbor Freight offers a No Questions Return warranty. Where if something goes wrong with it you bring it back and they take another off the shelf and replace it. I did not get the warranty but it is there if you want it. Hope this helps and good luck.

@cerberus2881 Жыл бұрын

How's it doing now?

@TheAirbrushGarage Жыл бұрын

Cerberus, I use this compressor every day and sill going strong.

@michaelelder9432 2 жыл бұрын

Thanks for the review, but you really need to incorporate fast forward in your timing tests.

@TheAirbrushGarage 2 жыл бұрын

Michael, thanks for the feedback it helps me improve my videos and I am glad you found the review helpful. Thanks for the comment and thanks for watching.

@michaelelder9432 2 жыл бұрын

@@TheAirbrushGarage I’m 68 and I know my attention span has succumbed to all the social media postings lol. Keep up the good work!

@jcyoho31 2 жыл бұрын

This compressor of yours still in use?

@dancuccurullo8453 2 жыл бұрын

Jcy, absolutely! Use it just about every day for about a year now. Thanks for the question and thanks for watching.

@jcyoho31 2 жыл бұрын

@@dancuccurullo8453 thanks for letting me know... I may get the 4 or 5 gal version.

@beeperbugs6535 2 жыл бұрын

Reminds me...I will use a spare (aluminum 😎) tank when QUIET EST is needed 👂😴

@chubbyjaydraws 2 жыл бұрын

$160 seems like a very decent price for a compressor.

@davidlastname1315 Жыл бұрын

What are the dimensions? LWH

@TheAirbrushGarage Жыл бұрын

David, 16" x 16" x 13"h

@davidlastname1315 Жыл бұрын

@@TheAirbrushGarage thanks. After seeing them in person I came close to getting the 1 gallon. It's such a nice size but it was hard looking at the size difference in the motors and not going with the 2 gallon for $40 more. Thanks for the review

@Thornbeard 2 жыл бұрын

At $130 that is a great price, though 60db is not something I would call ultra quiet. My Silentaire Super Silent 20-A runs at 30db. My studio is in my house so I need something a bit more quiet. Great review thank you for the content.

@TheAirbrushGarage 2 жыл бұрын

Jason, thank you for sharing. That will be very helpful to other viewer's. I have not had the opportunity to test or own a Silentaire but but my research says they are very good compressors and at 30db....Dam that's quiet. Thanks for the comment and watching.

@LawrenceValverde Жыл бұрын

But are you really comparing a $160 compressor to a $750 compressor??

@merrillwatkins54 Жыл бұрын

I just purchased the Silentaire Super Silent 20A from a nearby thrift store for $60 and have been looking around on here and there to find out just what exactly it is that I have . . . and what all I might can be able to do with it. I need A LOT of info, accessories . . . not to mention operating & maintenance instructions since all I have at this time is a box with air coming out of a hose when I turn it on. HELP !

@colburn888 2 жыл бұрын

I cant see the dislikes, but I got a feeling they're very low.

@TheAirbrushGarage 2 жыл бұрын

colburn888, No dislikes, at least yet. This is the compressor I use and I love it.

@marsbase3729 Жыл бұрын

That's "quite" the air compressor, lol

@doug595959 3 ай бұрын

is this piston or diaphragm

@TheAirbrushGarage 3 ай бұрын

The oil-free designs do not allow oil in the compression chamber and use pistons of self-lubricating materials. I hope this helps, and thanks for watching.