Рет қаралды 261,148
How to connect cross and stair switches:
• Jak podłączyć łączniki...
How to connect a cross connector with two stair connectors:
• Jak podłączyć łączniki...
How to connect stair connectors - method No. 1:
• ŁĄCZNIK SCHODOWY - JAK...
How to connect stair connectors - method No. 2:
• Jak podłączyć łączniki...
How to connect stair connectors - method No. 3:
• ŁĄCZNIK SCHODOWY - JAK...
How to connect the temperature controller with underfloor sensor - OSPEL RTP-1Y 230V:
• Jak podłączyć regulato...
How to connect the LED dimmer - OSPEL ŁP-8UL2 - assembly and programming:
• Ściemniacz do LED Dimm...
How to connect a candlestick switch - Method 1: • JAK PODŁĄCZYĆ ŁĄCZNIK ...
How to connect a candlestick switch - Method 2:
• JAK PODŁĄCZYĆ ŁĄCZNIK ...
How to connect a candlestick switch - Method 3:
• JAK PODŁĄCZYĆ ŁĄCZNIK ...
How to connect a single-pole switch - pinless electrical installation:
• JAK PODŁĄCZYĆ ŁĄCZNIK ...
How to connect a single-pole switch - junction box electrical installation:
• JAK PODŁĄCZYĆ ŁĄCZNIK ...
How to connect the OSPEL ŁP-16 motion sensor - assembly configuration manual test:
• Jak podłączyć czujnik ...
The way to flash LED bulbs and energy-saving fluorescent lamps after turning off - capacitor installation:
• Sposób na miganie żaró...
Flickering, glow of an LED bulb - See how to solve the problem - Capacitor OSPEL 0.1µF 275V:
• JAK ZLIKWIDOWAĆ ŻARZEN...
How to remove the glow of LED bulbs and energy saving lamps after switching off the voltage:
• Dlaczego LEDy świecą s...
How to connect a 230V socket with a 5V 2.1A USB charger - OSPEL Aria:
• Jak podłączyć gniazdko...
How to connect aluminum and copper wires - WAGO Alu-Plus protective paste:
• Video
How to protect a 230V socket against a small child:
• Jak zabezpieczyć dziec...
How to reset the electrical socket with pin - electric shock protection, TN-C:
• Jak zrobić zerowanie g...
How to ZERO 230V electrical outlet in a two-wire installation - a way to ground:
• Zerowanie gniazdka ele...
How to replace a single electrical outlet with a double, TN-C, 2 wires:
• Jak wymienić gniazdo p...
Installation of the electric socket in an old two-wire TN-C 230V ~ system:
• Jak podłączyć gniazdo ...
230V double electric socket - reverse polarity in the second socket:
• Gniazdko elektryczne p...
The way to short wires in an electrical installation box:
• SPOSÓB NA KRÓTKIE PRZE...
The Phase Wire in the 230V power socket should be on the left, BUT IT MUST NOT:
• GDZIE POWINNA BYĆ FAZA...
Installation of the 230V TN-S electric socket, 3 wires:
• Jak podłączyć to chole...
How to remove insulation from an electric wire - TOPEX automatic insulation stripper:
• Automatyczny ściągacz ...
How to connect a single channel astronomical time programmer 24-264V AC / DC - BEMKO TPA1:
• PROGRAMATOR CZASOWY AS...
How to replace a glass fuse in a surge protector:
• Jak wymienić bezpieczn...
The stair system with the use of a cross connector allows the lighting to be turned on and off from three different places. The use of stair connectors and cross connectors can take place in staircases, corridors or vestibules.
We can connect any number of cross connectors between the stair connectors, which must be at the ends of the stair system.
-------------------------------------------------- -------
Song: Mario Ayuda feat. Mia Mormino - Nightmare (Instrumental Mix) [Concordia Recordings]
• Mario Ayuda feat. Mia ...
-------------------------------------------------- -------
----------------------------
ATTENTION
Danger of electric shock!
Installation work may be performed by a qualified person.
Before starting work, switch off the voltage of the electrical system.
WARNING
Danger of electric shock!
Installation work may be performed by a qualified person.
Before starting work, switch off the voltage of the electrical system.
--------------------------------
#foruminformation #electrician #vteka # 230v #book #tutorial #manual
--------------------------------
#Forum Knowledge #Electrics #vtek # 230v #Tutorial #Tutorial #Manual #Manual