Hello friend, I have a packaging factory in Argentina, I love machines and tools and I want to congratulate you on your way of working and the order of your workshop, and the neatness of your tools, your machines and your way of working. You're a genius! God bless you!

Смотрю и завидую. Какая мастерская, какие станки, инструмент. Какой Мастер 😊. Удачи Вам и здоровья!

You have all the cool toys. I love it👍

The right tool makes the job so much easier. And it finally dawned on me why you incorporated that roll of paper when you built that work bench. So simple and yet brilliant. Keep em coming, buddy.

I am so in awe of how easy you make it look. Im also wicked impressed with the amazing tools you have. You definitely get what you pay for

I left a comment on the power pole table....while watching, i was thinking of all different things to do with the large roll of paper. Laying I out for glue run out didn't register till now😂😂. Incorporating it into the table is perfect👍

Can only imagine how fun it is to work when you have all those tools

I highly rate Freud stuff. I am really jealous of your machines though!

Dang, you make everything look so easy, especially those crazy joints in your other videos. Do you ‘ever’ make a mistake!! Thanks for sharing.

Mr Dusty, The Master Continues!!!! Thank You for sharing Your Talent with All!!! Big Inspiration!!!!

I’ve been kicking around the idea of buying a domino, which clearly has many advantages, but for panel glue-ups, tung and groove would be fine and, a hell of a lot cheaper. Of course, bits for my Rockler router table setup are far cheaper than the monster bits you use. The only downside is that you’d see the tung and groove from the edge of the panel, but I personally like seeing the joinery so it’s not really a downside. Of course, you can cover up the ends with breadboards, but I don’t care for the look of breadboards. You always make everything appear so easy and, yes, the machines you have help, but you are truly the master of joinery and one hell of a great woodworker, at least from the products I’ve seen come out of your shop. I wish I had a set up like your shop, but I’m 64 so by the time this beginner could gain the experience, find the money to buy the tools and establish a customer , or even a KZfaq subscriber base, I’ll be too old to actually make the products everyday. Actually, my wife would kill me before I even got to that point after she saw what I was spending on the machines alone. I enjoy watching your channel and living my dream through you. I wish you continued success my friend.

I’ve not had much luck with the centre referenced glue joint cutter. It never seems to be exactly the correct height and leaves a lip. Your loose tongue method is good as it preserves all the width of the timber when the timber is in short supply. Cheers

I am so jealous of that shaper. It is like a router table that went through puberty.

Each one sounds like a different note on a harmonica lol love it

Skill level is just something else. This man is so amazing 😻

I can't believe I won the drawing you had. Looking forward to my new tools. 🍻

Very cool Equipment you have. I like Woodwork. As a young Boy, I beginning to building boxes and cabinets... But I have only a few Machines. My last new was a tabel saw from Bosch.....

صديقي تحياتي من الجزائر القد ادهشتني حقا انت فعل ماهر شكراً

Love it my friend!! Thank you!

Yes, with the help of such ingenious inventions, you can make a tabletop for a table.

That was interesting. I knew about tongue and groove but I didn’t know some of those other ones.

You make it look so easy dusty!

Your resources are matched to your resourcefulness

Fantastic, loved the work bench, the machining & tooling is made to look easy, but suspect that’s just you 👍🏻

Beautiful you have all the tools that will be perfect for my business. I do hardwood floors for a living. Totally cool.

Is this how ASMR videos are supposed to make you feel? I love this videos

This is fantastic sir ❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤You should start your own college of joinery❤❤❤❤❤❤❤❤❤❤❤❤❤❤

Do you have a preference for which of these 4 you would use for all joints like this? Meaning if you only had to use 1, for all projects, which would it be?

Hi bro, love the way you work and your skills, really appreciate it. God bless you.

I just want to hang out in your shop. What a dream man cave it is. You have great skills also brother..

very good materials! after cooking, my second passion is woodworking! 👍👍😉😉

Dude, your workshop would be like Disneyland for me

What is so special on this, I do this for living every day for 8 hours.

Man… You are one fast guy 😮 0:54

Love your videos can you please do a shop tour

Как же приятно смотреть на новенькие хорошие фрезы. А какого же ими работать

Brother i love your work

Man, you got more toys, I mean tools, than I got.

Привет из Siberia, из города Omsk! Напомнило, как у зубного врача на приёме, он достает из своих коробочек разные фрезы, буры! Шутка! Все-таки классный материал - дерево, тепло от него исходит! Потому что Богом сотворено!

That's a cool and useful tool

Красавчик, очень нравиться твое видео🤟🤟🤟

Good to see what you can do.

I learned a painful lesson with miter-lock and glue. Once cut the fit is perfect and the dry assembly was beautiful. Add glue and the small grooves capture the liquid and have no vent for air and excess to push out. Do you have this cutter? Can you do a video? Jer

Awesome❤

Cool!😊

Yea Man, Sir you are the man

My new work place doesn't have a spindle moulder. I reeeally miss it!

Amazing work. Liked and subscribed. Is there a reason a Canadian woodworker wears a Swedish Blåkläder Tshirt in all his videos?

Как всё красиво и ритмично выглядит в вашем исполнении. Гарно.

Sweet!

Dobrze zrobione sloje są różnie ułożone nie bedzie się wykrzywiac. .Do schodów dawalismy dlugie drewniane kolki by nie było naprężeń.

Man you is on different level

Спасибо за ваш труд удачи вам.

How do you decide which one to use for each project? Is it just aesthetic? Customer preference? Or engineering considerations?

The sound of my weekends growing up watching New Yankee Workshop and the legend Norm Abram.

Мечты сбываются , счастливый плотник, всё у него есть

Tout est parfait , l'atelier, les machines. J'ai une question , je suis pas menuisier, pour vous faite trop de colle? Bon travaille

Fantastico 🤙 🤙 🤙 🤙

Essas máquinas são top. As minhas foi eu mesmo que fiz. Fiz serra fita desempenadeira. Tupia invertida furadeira, Mas essas são top de maisss Parabéns pelos trabalhos

What is call the adapter to use your shaper with router bits? Keep up with the good work 👍

Having the right tools and accessories makes work so easy.

What kind of support system are you using for your jointer? I really want to just know the name brand.

The question is which one of those four would be the strongest joint? Wished he did a 90 degree break or a straight pull. Oh, that is Project Farm dude. 😊

Vc tem muitas máquinas top

Nothin' but awsome!

Excelente

Been thinking of making an 8ft fence like this. Thoughts?

آقا کارگر نمی‌خواهید خیلی خوشم می آیید در این کار نجاری فعالیت داشته باشم ، واقعا خسته نباشید آقای چشم آبی خوشتیپ

Great cutters but only really good for alignment, Butt joint is just as strong, plus you loose width on the tongue side.

Santing ovation 😮 aaaaaamazing !!!!

ты молодец

sup man, why dont you get a power feed for your spindle moulder? seems like money isnt an issue and you'd use it a lot. Great vids and woodworking btw!

Dusty, you’re living the dream, dude - at least mine! Thanks for sharing your shop time with us, and I love that you ‘show’ without ‘telling’ as your style. You seem to have been custom-built for YT! Question: how much power does your shop take? I’m assuming 3-phase power but what’s the service size? OH, and does Festool or King Canada comp you stuff or are those tens of thousands of dollars worth of tools directly from hard-won and hard-earned effort?!?

Hello, I'm from Mexico, how good are Freud strawberries?

Luar biasa, saya iri melihat kecanggihan mesin yang anda miliki 😅😅

Привет! Можеш дать ссылку где можно купить эти фрезы❓Огромный лайк за труды и подписка. 👍

Wow, very cool! What is that machine called and why isn't there a link to all your parts?

What kind of wood is that?

Which joint is strongest?

Satisfying

You got some nice equipment bro and I really enjoy watching your videos keep up the good work only because I said so.

Do you have a link for the tools used?

Please keep your fingers off the end of the work piece as you feed it through. My father lost a finger from a kickback! Use the palm of your hand on the top rear edge or better still get a motorised feed roller.

Do you ever use hardwood I mainly see you use cedar.

What name machine?

I never saw them in their catalogue.

Wooo si ketiene herramienta buena

Do you ever work with hardwood, I mainly see you using cedar.

What do you call such a machine?

When can I come over and play with your toys?

Veyy good

Hello, do you have an internet link to buy Freud tools?

My Uncle bought that like last month and he use it

what machine is this you are using?

Lol looks like a video trying to explain to your wife why you had to buy an expensive tool 😂

я посмотрел его видео - он умеет разговаривать. ура!

Links to the tools?

Hi. Where can I buy them. Product links?

The glue always seems excessive. Is that necessary? Probably a dumb question... You're a professional and that's the amount you use so I'm sure it's good. I'm an aspiring wood worker.

❤