FOUR Cylinder RC Car - Hydro Brakes, Improved Cooling & Run!
Рет қаралды 2,662,796
Күн бұрынEngine of this video & other interesting stuff:
➥TOYAN FS-L400: bit.ly/3jxejdR
$100 OFF Coupon Code: L400 , Only $699.99 ,Save $100
➥Starter kit: bit.ly/36ShQhS
➥Toyan Engines: bit.ly/2VGhYuR?ref=8_o3dxgl2q...
➥Toyan Parts: bit.ly/3rzyY3D
}}}}} Use code: jq90 for 10% discount {{{{{
----------------------------------------------------------------------------------------------------------------
►NEW UPCOMING TOYAN V8 ENGINE!
➜ bit.ly/3rkRM94
---------------------------------------------------------------------------------------------------------------
➥My electric screwdriver:
SEQURE SQ-ES126: ban.ggood.vip/XyHU （Sale code: BGSQES126, US$81.44, 24th-27th only; usual code: BGSQ126, 10%off）
➥My 3d printers:
- Creality Ender 3 Pro:
ban.ggood.vip/XyHT (code: BGE3P36，US$186, US/UK/CZ/ES/AU warehouse)
- Creality Ender CR-6 SE:
bit.ly/3wZnKZ4 (code: BG8cfba7, CN warehouse, US$389, BG175e98, USA/AU/PL/ES warehouse, US$379)
➥Favorite radio system:
RadioLink RC4GS: ban.ggood.vip/XyHS (code: BG685310, 10%off)
➥Other stuff you might be interested in:
Coupon Center: ban.ggood.vip/Xw6T
Tools and Electronics Sale: ban.ggood.vip/Xw6S
RC Toys Sale: ban.ggood.vip/XxT8
--------------------------------------------------------------------------------------------------------
BANGGOOD 11.11 Global Shopping Festival:
Super Sale :ban.ggood.vip/10pPk
Saving Tips : ban.ggood.vip/10pPm
Coupon Deals：ban.ggood.vip/10pPo
-------------------------------------------------------------------------------------------------------
➥Subscribe! bit.ly/2m1d1y7
➥Instagram: johnnyq_90
➥Support my videos!: / johnnyq90
@Vault1337 2 жыл бұрын
"You would't download a car" Then this madlad prints almost everything, even the tires. Nice job again!
@Hitycooking 2 жыл бұрын
kzfaq.info/get/bejne/ldOjp8V_zuCzmn2o.htmlyt4
@allisterroy6604 2 жыл бұрын
The return of a king
@Artiick 2 жыл бұрын
Your damn right
@Hitycooking 2 жыл бұрын
kzfaq.info/get/bejne/ldOjp8V_zuCzmn2o.htmluy54
@fellmen2194 2 жыл бұрын
Indeed
@fdloop 2 жыл бұрын
Finally! It’s been a while. What took you so long to come with a new video? You exaggerate !
@MrDannyd9 2 жыл бұрын
Word!
@comeberza 2 жыл бұрын
I would love to see this with the grippiest rubber tires you could find! That engine and AMAZING brake system deserve the softest rubber to put the traction down
@kieranhendy 2 жыл бұрын
Was honestly shocked when I saw the 3D printed tires lol... after all that work, especially the brake upgrades just felt like such a backwards step to use plastic tires.
@ChunkyWaterisReal Жыл бұрын
@@kieranhendy not really. Rather have a tire crack and absorb impact than the frame
@kieranhendy Жыл бұрын
@@ChunkyWaterisReal what? I was meaning I expected him to use foam or rubber not literally solid plastic....
@em4703 Жыл бұрын
@@kieranhendy Why do you think only plastic can be 3d printed? Plastics, metals, even sand can be 3d printed. NinjaFlex is for all intents and purposes, rubber.
@Turbowagon Жыл бұрын
@@em4703 it is not even remotely as grippy. I've personally done the same. Tpu/ninjaflex tires might as well be plastic
@MikeLaRock88 2 жыл бұрын
The brake calipers and master cylinder are on another level. This is the best project RC car I've ever seen
@Jeff44 Жыл бұрын
JohnnyQ90 is a fantastic craftsman and astonishing engineer, of that there is no doubt. After seeing Keith57000's car and homemade V10 WITH VVT I would hold off on the"Best RC Car" title for a while.
@ManualdoMotorStirling 2 жыл бұрын
I never imagined that it would be possible to print tires with a printer, very good! The difference in grip from one tire to another is really big, very interesting. That first wheel you printed, I was wondering if it could withstand the power of the engine, and it really was a problem, but you solved it. Very beautiful your cart, congratulations!
@karyjas1 2 жыл бұрын
I think the difference in grip was becouse the front wheels were unpowered
@Hitycooking 2 жыл бұрын
kzfaq.info/get/bejne/ldOjp8V_zuCzmn2o.htmly4
@Ronnaferd 2 жыл бұрын
Knowing a little about 3D print strength I had a feeling those first rims weren't going to survive the power. But they looked nice. I'm also impressed with the print quality on those supple tires 😍
@aserta 2 жыл бұрын
@@Ronnaferd if he'd machine an aluminium drum for the printed spokes, it would work. Alternatively, you can put aluminium rings, which then makes the wheel very strong.
@typing...3109 2 жыл бұрын
if you can 3d print organ you can print anything
@joshuasterling2144 2 жыл бұрын
Things you traditionally can't get from an RC car, literally everything you have done. On top of that this version actually moves like you want it to, you must be very pleased.
@johnwoodland690 2 жыл бұрын
I smoke a lot of weed like...
@alirezajafari6724 2 жыл бұрын
Radiator gear box hidrolic brake fuel system thats incredible
@tonywalton532 2 жыл бұрын
good morning. Does anyone have instructions you would give on how to put the toyan FS-l400 engine in a RC car, i need complete ideas. Thanks
@catbucketgamingmoonlightme9555 2 жыл бұрын
Wq²à
@ChunkyWaterisReal Жыл бұрын
@@tonywalton532 measure twice cut once bb. Figure it out as you go
@SlimTheGoat 2 жыл бұрын
Tires account for so much of the handling characteristics, some proper rubber tires and a post-less body mount are the only two things needed for this to be the ultimate rc car build of all time🙌 🤞🤞🤞🤞👀
@gsrocks71321 2 жыл бұрын
Incredibly impressive stuff here. Watched from the engine build on, and with my basic car/engine knowledge I was able to recognize and understand what parts did what immediately. I feel now like I might be ready to actually do this myself, so thanks for inspiring me and giving me the confidence that I can do it! Earned a sub for sure.
@BLX187 2 жыл бұрын
Best sounding Rc car ever. Next project needs to be a record breaking speed run special
@Hitycooking 2 жыл бұрын
kzfaq.info/get/bejne/ldOjp8V_zuCzmn2s.htmlyt
@dannyb9083 2 жыл бұрын
202 mph has been pretty unreachable for some time. Some are just now starting to get close since 2014. Electric tech is the only way to go.
@BLX187 2 жыл бұрын
@@dannyb9083 a gearbox would be needed
@1one3_Racing 2 жыл бұрын
Sounds like a sport bike. I'm wondering if it's got a 270 degree crank
@bdub1682 2 жыл бұрын
@@BLX187 it has one i believe
@mealex303 2 жыл бұрын
Get yourself a flir to see where the heat spots are and how the radiators are working next to each other and if they could do with having being turned round?
@Hitycooking 2 жыл бұрын
kzfaq.info/get/bejne/ldOjp8V_zuCzmn2o.htmlytr
@rayhai6781 2 жыл бұрын
not only that, would use ASA for the rims, it's like ABS, but won't fume that much. Enclosure for the printer needed. Got the Ender 3 Pro too and just use the original fireproof enclosure, so you can put it away in a small box if not needed. But nice to see TPU printing on that one, most people say you would need a direct extruder, but hey, it get's the job done without one :)
@summerkaymike 2 жыл бұрын
Love how the hobbyist can now have the tools at home create masterpieces like this. People's genius can shine through and we all get to appreciate it 👍.
@offalyman1 2 жыл бұрын
I would love to see the plans for this, including the engine, i just sat through this video with a massive smile on my face muttering to myself, "wow" "excellent" and more, this is definitely one of the best RC builds i have ever seen, and the fact that you built is all from scratch is a credit to you and your creativity. absolute awesome work, the only thing i would like to see on it, would be some proper race soft rubber compound tires, this will allow you to really give it some, and maybe a little tweaking on the bell housing so when you lock the brakes up the clutch will give just enough to stop the engine from cutting out.
@DirceuCorsetti 2 жыл бұрын
"Body shell too low to the ground". I know man, there's no reason having a RC car if it can't be a daily driver.
@martyn5799 3 ай бұрын
Got to admit it looks bad ass
@sebastienseb919 2 ай бұрын
🤣
@That_Stinger_GT5 2 жыл бұрын
This is an RC build on "GOD MODE", I love this thing!
@shankroidbeast4644 2 жыл бұрын
This video showed up in my algorithm. I’ve never seen anything like it. I didn't know R/C cars this sophisticated even existed. I'm blown away at the tech, precision, and engineering. Holy crap!
@shawng7902 2 жыл бұрын
I don't know if the 4 strokes will ever make the power of nitro engines, or if nitro can out perform brushless, but 1 thing is for sure. You have created one that the sound blows them all out of the water. That thing sounds awesome!! The design layout blows me away too. You can obviously make anything it's proven, but the design is so neat and well planned out it blows me away. So well organized. If the tires keep causing an issue, you could always CNC a set of aluminum beadlocks to fit a production tire. I have proline street tires that are sticky enough to break every axle I've ever tried to run lol.
@bigvik24 2 жыл бұрын
My friend made custom tires for his track car, he 3D printed segmented tire molds, that are fit on the existing rims and injected them with silicone caulk. It gives a lot of grip on smooth concrete, but tires are very soft and rip quickly, they may last longer if the caulk will be mixed with some sort of fibers.
@danielrouw2593 2 жыл бұрын
Nylon rope should make for killer fibre. There is a reason they put it in high grade rubber tubing.
@simoneiorio9703 2 жыл бұрын
your fiend need to find a way to put some right tissue inside the mold to give the right structure (like real tires).
@st33lwill22 2 жыл бұрын
Kevlar
@peterzingler6221 2 жыл бұрын
@@simoneiorio9703 steel grit. Just like the real deal
@simoneiorio9703 2 жыл бұрын
@@peterzingler6221 In that scale steel can be difficult to manage and find for exact needs. Maybe the solution can be a middle way from 3d printed wheel inside skeleton (with right material in elasticity and stiffness) and a molding techniques. If well engineered that wheel, maybe, would be covered more times when worn out. A gyroid (CURA infill style) elastic filament structure can solve many many problems in final weight, functional stiffness, and rubber covering, in mold.
@titanary68 2 жыл бұрын
It’s all around badass and I’m jealous as hell but that fully functional cold air roof scoop is not only next level but pure genius! Excellent build.
@Chris-ey6rn 2 жыл бұрын
This has got to be one of the coolest RC cars I’ve seen and it definitely makes me miss the hobby . Amazing how far a lot of that has come
@lukebaines7785 2 жыл бұрын
This will blow you away in that case: kzfaq.info/get/bejne/hd2AeJeCuZvMmKs.html
@lamboplays1663 2 жыл бұрын
as someone who owns the big-6, in the original form and with a body and all of the collectibles parts, it hurts to see a big-6 chassis go, but, i can tell you, this is a bad ass build with amazing work.
@pfg72 11 ай бұрын
I just finished watching the complete playlist and I must say I'm in complete awe of you! I mean it, I'm at a loss for words. This is nothing short of a work of art and an amazing feat of engineering. Cheers from Patagonia!
@gutsngorrrr 2 жыл бұрын
Things have moved on so much now with what you can create at home, as long as you have the skills to do so. Amazing work throughout this build.
@540Baseball 2 жыл бұрын
It’s been so long I have forgotten why I subscribed. Oh, now I remember…
@Hitycooking 2 жыл бұрын
kzfaq.info/get/bejne/ldOjp8V_zuCzmn2s.htmlytr
@wadewilson2361 Жыл бұрын
Cnc the rims and use rubber tyres...would be awesome
@teabags3632 2 жыл бұрын
You should dip those tires in flex seal
@TheJaredScheller 2 жыл бұрын
Yeah, as soon as I saw the first rims I was thinking that would be the outcome, especially once I saw the overall car weight. glad you got them sorted with the second attempt.
@Hitycooking 2 жыл бұрын
kzfaq.info/get/bejne/ldOjp8V_zuCzmn2o.htmly
@thedude8046 2 жыл бұрын
@@LUNA-fx2udYOU STOP IT!
@XBullitt16X 2 жыл бұрын
Yeeep, was thinking they were too small and thin when I first saw them.
@SteliosRcdrift 2 жыл бұрын
Your suspension is very inclined in the rear and reacts very slowly. Try to mount it more straight up and down to see the difference. Great job, you are an artist!
@Sky_TEC_Illustraition_Systems 2 жыл бұрын
Never seen this level of customization on an RC platform before. Superb effort. Hats off to you chief.
@AmzP88 2 жыл бұрын
This build is phenomenal! I never knew there was such thing as a 1/6 4 Stroke engine with working radiator and disks !!!!!! Btw great intuition with the earphone covers.. 👍🏽
@typicalg7051 2 жыл бұрын
the making of this is like an ASMR for me, so relaxing
@Fix_It_Again_Tony 2 жыл бұрын
I enjoy that there is no speaking.
@RileyBanksWho 2 жыл бұрын
Yeah, no irrelevant life stories, ads, dumb rap music etc. Oldschool YT style, just how I like it😎👌🏽
@KushNL 2 жыл бұрын
Man what a fantastic project. Love the skills. I wish i had the knowledge and equipment to do this. Thankfully you do so i can watch it!
@Hitycooking 2 жыл бұрын
kzfaq.info/get/bejne/ldOjp8V_zuCzmn2b.htmltr
@kevinsellsit5584 2 жыл бұрын
The bleeder screws on the calipers should always face up because you are bleeding the air out of the fluid. Love the fiberglass disks. This thing is awsome!
@anthonylodi8980 Жыл бұрын
Well, it is an rc car, he can turn it upside down… lol
@mmoradiointeractive 2 жыл бұрын
Way more money and brain power than I'll ever have, but great ingenuity and creativity. Love the build.
@keepitfrosty9405 2 жыл бұрын
So talented love all the things you make I’m always left in awe the time and passion you put into you projects is second to none 👌
@rbrown_barber4231 2 жыл бұрын
Amazing build! Some fine tuning with Rubber tires, body off the ground, and more downforce and it’s ready for some laps. Great build 💯
@highwaytoquail754 2 жыл бұрын
Def needs some real rubber bands on there. Game changer then.
@marshalllove 2 жыл бұрын
This is by far the best RC car I've ever seen and I admire ur work. I am years behind on the RC technology and this makes me want to get back in it again. And I must add this is the best sounding RC I've ever heard. Good job!
@wildcat650power 11 ай бұрын
I'm a 40+ year RCer. You need to stiffen up that suspension in the front with a heavy oil. You can see in the video that it dives forward when you break or let off the throttle.
@BOT_Phoeba 2 жыл бұрын
You're an absolute chad, man. First, custom making all this, then assembling it all by yourself? Awesome. Then upgrading it to be even better? Perfect. Then 3D printing NinjaFlex on an Ender 3? Absolutely godlike. Didn't even know you could put this much maker skill into one channel.
@robertrose1098 2 жыл бұрын
Your definitely a master !!! Beautiful work, amazing fabrication skills. !!! A real pleasure to watch your work!!! 10/10 for sure.
@kofiedixon-ue8yd 6 ай бұрын
This amazing RC car is the best amongst the rest iin the world
@evlkenevl2721 Жыл бұрын
21:48 Aw, that was nice of you to include your neighbor playing around with their RC car in the background.
@knartfocker_ 2 жыл бұрын
Johnny, make sure to get an enclosure and air filter for that 3D printer, it'll improve both your prints and your health.
@yourstrulylocal3673 2 жыл бұрын
Something I think that might work for the tires, is reduce the rim size (if clearances of anything permits), then make a tire with a taller wall and a comb-like structure on the interior to give them some some squish so the wheel can bite down better. Another idea, you could also try deeper treads, more blocky treads
@suzysuzuki8865 Жыл бұрын
Tires get better traction with no groves or tread. The tread is there since driving conditions aren’t always perfect. Like for example, while you grip better with no tread while it’s dry out, should you hit a puddle without the tread your risk of hydroplaning is very very high. Or off-road vehicles with the super aggressive tread for mud and what not
@dudscoconut 2 жыл бұрын
corvette c8 body with 4 cylinder RC, nice!
@joshstauffacher819 2 жыл бұрын
The masculine urge to build an extremely accurate RC car
@bencapobianco2045 2 жыл бұрын
Great videos!! And as a CNC machinist myself I love the pocket mill and your attention to precision and detail!!!!
@ThomasPCGuruENGINES 2 жыл бұрын
Outstanding. Like your whole life has led up to this...some of the detail extremes you go to are amazing and you're getting so much better at building your own...nearly everything. 10/10
@Greenmachine305 2 жыл бұрын
The exhaust seems very close to the electronucs box. Awesome build.
@ihaveanunorigionalname Жыл бұрын
the fact that you 3d printed your hubs and wheels keeps me coming back every month to watch this lol
@aidanc3982 2 жыл бұрын
I feel that an MR2 body would have also been super fitting given the mid engine and front radiators, but the vette body looks rad!
@marctheman13 2 жыл бұрын
You do know c8's is mid engine too right
@aresakmalcus6578 2 жыл бұрын
@@marctheman13 but not a 4 cylinder :D
@marctheman13 2 жыл бұрын
@@aresakmalcus6578 yeah but it sounds more like a v8
@americanmaker8608 2 жыл бұрын
I have been watching this build for the beginning. It’s freaking awesome. Love the sound of this car. Amazing work
@FarmerFpv 2 жыл бұрын
Quick pro-tip. Get a 2 liter of coca-cola poke a small hole on top and shake the bottle. Spray the street with coca-cola, wait 10 minutes to dry and you will have amazing grip on tires. Thats what we do for on-road RC car racing.
@Noobixm-GGD Жыл бұрын
Mans really just built an entire car
@hqlion 2 жыл бұрын
Simply amazing craftsmanship as usual. I think you may need a full underbody pan to stop the body deflecting when it touches the ground.
@matns1382 2 жыл бұрын
A little tip: Use leftover lexan to make washers under body clips. After some driving clips leave dark, permanent marks. Great job with the project!
@Hitycooking 2 жыл бұрын
kzfaq.info/get/bejne/ldOjp8V_zuCzmn2b.htmlytr
@TryNotToHate1 2 жыл бұрын
This level of hobbying is sincerely impressive. Breaking wheels because of axle to work, it’s just something that needs to happen from time to time.🤣😎👏🏽😎 It’s like a little tiny Ferrari engine in an RC car. Can’t lose!! Awesome. Top work
@riz_e9 3 ай бұрын
I find myself online looking for interesting engineering projects of no particular bias as a last point of call before bed. Im genuinely in awe here. This is nothing shirt of brilliant, well done!
@DomEngines 2 жыл бұрын
You know you get your time worth of content, when Johnny makes an upload. Thank you!
@2001pulsar 2 жыл бұрын
Great work! That road surface is incredibly rough for a small scale. Maybe try on cement. Also, body roll, perhaps some sway bar upgrade would help.
@DJDevine 6 ай бұрын
Awesome build! So intricate! I love the sound of that 4 cylinder engine, it sounds like an actual car compared to single cylinder engines only at idle do they sound similar because of the same clutch system. Absolutely beautiful work! You are meticulous and passionate about your RC Hobby/passion. Cheers
@tonyradmilovich3154 10 ай бұрын
Seriously, some of his builds should go to a science museum someday. If these don't inspire future engineers, I don't think anything could.
@YancySmithTurboRexPerformance 2 жыл бұрын
I would have thought that the bleeder valves would need to be facing up in order to purge the air from the calipers.
@flukey98 2 жыл бұрын
Love the vids, 1 query I do have is if the bleed nipples for the callipers are at the bottom when bled, will the air not just stay at the top? Maybe turn the car upside down to bleed.
@barrybritcher 2 жыл бұрын
Swap caliper side to side. Common issue
@codytrent9887 2 жыл бұрын
Considering the extent you went to with this build, I'm a little surprised that you didn't make functional headlights and tail lights hahaha!
@Dat550go 2 жыл бұрын
The world needs to see this. This will inspire so much creativity within the world. This is what we've been looking for. This is what the world needs to bring the future (a.k.a our youth) back to a higher mental state and lead the world to a better ascension.
@timessix8434 2 жыл бұрын
I really love the machining and assembly, fantastic work - but it would also be extremely interesting to see the design process of all unique parts!
@Gavs_rc_hobbies 2 жыл бұрын
This would have to be one of the coolest builds ever.
@alex_inside 2 жыл бұрын
@Keyzer Soze there is a guy building a V10 one with a hybrid system. Not trying to knock the build, both are great.
@vijaykrishnan2520 Жыл бұрын
An RC car with an Idle….never thought of it, THIS IS AMAZING!!!!
@krs1476 Жыл бұрын
This might be the most beautiful thing I've ever seen. I might cry.
@jasonparsons3301 2 жыл бұрын
Such a great build, thanks for letting me be a part of it!
@broli123 2 жыл бұрын
You should really get a resin lcd printer. Your parts will be much stronger, you will print much faster (ex. 4 rims at once) and compliments your hobby very well for making detailed accurate things.
@DoRC 2 жыл бұрын
Resin is not inherently stronger than filament. As a matter of fact most resin is weaker than most filaments. There are specific tough resins you can get that are pretty strong but they are expensive. Resin is also have pain to work with compared to FDM.
@Hitycooking 2 жыл бұрын
kzfaq.info/get/bejne/ldOjp8V_zuCzmn2s.html54
@ThatBlueHoe 2 жыл бұрын
@@LUNA-fx2ud shut up bot
@MisterMikeTexas 2 жыл бұрын
That Four sounds like a multicylinder engine! Great sound, great work!
@danw1955 2 жыл бұрын
What a cool project this has become! Surprisingly, that 4 cyl. sounds a LOT like the new Z06 with the flat plane crank!! Go figure!😂 👍
@gustiolodeh 2 жыл бұрын
my dad said, someone who is good at creativity will never disappear, it's just that they secretly want to give something special. And sure enough, you're back with something new and even more exciting
@Zo-Rage1 2 жыл бұрын
Who the hell dislikes this kind of thing? Great job I've been watching since 10k subs
@andrezesna3920 2 жыл бұрын
Maybe Greta because its not Electric car
@olafberend8837 2 жыл бұрын
Cool sound and when you installed the first hubs, I was afraid of the fiddle transitions from hub to spokes… Great job, hope it was to your pleasure, too.
@tm5123 2 жыл бұрын
Oh wow it sounds awesome. None of that annoying lawnmower sound, its like a mini rallycar!
@bobz1736 2 жыл бұрын
Awesome work. I can't imagine the hours of CAD design... Best to buy some proper RC racing tyres - they are super sticky ! 👌
@bunger8658 2 жыл бұрын
Been watching the channel for years now and I gotta say you have some of the best RC/making stuff content on youtube. Keep up the good work man
@hhmking6852 Жыл бұрын
I don't know why I was expecting all wheel drive with this build.
@kimjong-un4954 2 жыл бұрын
RC hobby is an expensive sport but, worth it when your car does what you dreamed of
@tamuct01 2 жыл бұрын
Great job on the project. I've done the OpenRC F1 car and I can say that TPU printed tires are garbage. The plastic has so little grip that donuts is about all you can do. I see you have found out the same. Good job on the design. It's a work of art!
@gabrielvalencia1395 2 жыл бұрын
As soon as I saw the tires were printed I thought grip was going to be an issue. Can’t beat good ol’ rubber. Even with the spikes I don’t think they match. Solving the rim problem was nice though.
@wrappnalaskan 2 жыл бұрын
The amount of awesomeness in this video is almost too much...from the fabrication to the imagination and detail this whole project is jaw dropping...i love it dude
@sjdennis 2 жыл бұрын
can we just stop to appreciate the sync at 22:12.
@CryptomeNL 2 жыл бұрын
Are you kidding me? Even the tires and rims made? Excellent job!👌🏻
@ymerejtsujsti 2 жыл бұрын
Great build! I would think the caliper bleeders should be at the top to allow air to bleed out as you push the brake fluid through?
@jobdone3700 2 жыл бұрын
He could easily turn the car to have the bleeders on top .
@Truroben 2 жыл бұрын
Watching your videos is akin to meditation for me. Very enjoyable, and amazing work.
@jeroldbreazeale4717 Жыл бұрын
This video is absolutely ridiculous!!!! The craftsmanship pure genius
@danne77sthlm 2 жыл бұрын
This is insanely fun to watch and so impressive that I dont think my jaw will close again for a week or two, and then I have not even mentioned the "want-to-have" factor!
@PALM311 2 жыл бұрын
Your work is phenomenal. I like that your talent speaks for itself through your work without you having to say a word letting everybody know just how talented you are. lol I would love to see you build an engine from scratch. Obviously you have the skill level and I think it would be cool to see an engine that you built from the ground up and running!
@MrKingdavis13 Жыл бұрын
Every single caliper is installed upside down. The bleeder has to be at the to of the caliper to get the air out so they all need switched let for right to work properly.
@s.hooper4683 Жыл бұрын
Lol.......I actually found that out the hard way on my first hot rod build. I accidentally put the rear calipers on backwards so the bleeder screws were on the bottom instead of the top where the air could be bled out. It took a very frustrating few days to see it. The engine l built lit the first time out and ran perfectly. Go figure huh?
@kyzor-sosay6087 Жыл бұрын
Looks like Johnny got them air free too me. Why should it make any difference where the bleeder is located? Not trying to be a smart ass,just asking.
@agtronic Жыл бұрын
@@kyzor-sosay6087 Because air always always pools at the top. So no matter how many attempts you make to bleed the brakes, there will always be a pocket of air trapped in the top of the caliper. Air is bad because it can be compressed, so instead of the hydraulic pressure pushing on the brake pads, it compresses the air. But to be fair, many motorcycles have the rear caliper with the bleeder on the bottom, but you have to remove the caliper and put it upside down to bleed it correctly (with a spacer between the pads obviously.) But in reality, I don't think a bit of air in the system on an RC car would be that much of an issue. If anything, it probably adds some buffering in the control which could be helpful.
@agtronic Жыл бұрын
Another thing, you could bleed them backwards, where you push fluid into the bleeder and let the air out at the master... If design allows.
@MrKingdavis13 Жыл бұрын
@@kyzor-sosay6087 Because air is lighter than oil so when you are trying to get all of the air out of the system the bleeder has to be at the highest point on the caliper. This is where all the little bubbles will collect and have a place to exit. Having the bleeder at the bottom makes it impossible to get all of the air out and the laws of physics don't change just because someone thinks they know better. Hope this helps.
@gtgodbear6320 Жыл бұрын
RC car knowledge has definitely improved since my childhood nitro cars. A functional i4 in a rc is awsome.
@crazyblsidiotspace Жыл бұрын
I absolutely LOVE the fact that you used the C8 body!
@jakematthews6982 2 жыл бұрын
I’m halfway through the video and you’re bleeding the brakes right now. I hope you noticed that the calipers are either upside down, or you’re going to have to swap the fluid inlet and the bleeder valve locations on all of the calipers. The bleeder valve needs to be the highest point on the caliper to allow air to be bled.
@-DEATHSTROKE 2 жыл бұрын
Incorrect, if the bleeder valve is at the top of the caliper you are supposed to remove it, let it hang and then bleed it with gravity.
@waynedavis42o 2 жыл бұрын
Well all car manufacturers must have it wrong then 🤣 they are all fitted at the top 🤣 even worked on cars with brake issues because people fitted wheel cylinders upside-down (bleed valve down) easy fix, flip and bleed 🤣👍
@beeftec5862 2 жыл бұрын
@@waynedavis42o rc and and real not the same though, cant pump master cylinder
@waynedavis42o 2 жыл бұрын
@@beeftec5862 but he literally pumps them in the video and the only way it would really work is back bleeding the physics apply to both rc and cars
@americanwillpower 2 жыл бұрын
@@beeftec5862 hydraulics is hydraulics no matter the size..lmao
@tricky4g63 2 жыл бұрын
I'm surprised you were able to get all the air out of the braking system with the bleeder pointed down that's usually a major issue
@Fix_It_Again_Tony 2 жыл бұрын
Yeah. It's a common installation issue on full size cars when the calipers are replaced. People get the sides mixed up and the bleeders end up on the bottom. Air bubbles rise so the bleeder always needs to be on top. It's possible the hydraulic pressure is much lower here so maybe it isn't as important, but I'd still want to get the air out.
@FILBZ 2 жыл бұрын
Great job as usual! Love the sound and brakes. Just thinking out loud ... do you think a little weight would add the traction and braking effect you're after? Maybe distribute via weighted/metal bumpers? Just a thought ... looks fantastic!
@garypeterson9083 Жыл бұрын
Awesome build, what a work of art. The bleeder valve on the brakes should be on top to remove air in the system. Keep up the good work.
@salmiakki5638 2 жыл бұрын
I don't think the suspension arms are designed to sustain the torque loads form the brakes, it's seem like the original model had inboard disk brakes right?
@ejcrashed 2 жыл бұрын
Yeah, particularly the front ones seem to be weaker...
@bobnoblesjr.465 Жыл бұрын
Awesome build! You are a true craftsman.
@adammorris3082 10 ай бұрын
Brilliant, The car looks and sounds so good as always! The printed wheels tyres along with all the mechanical detail, the brake and improved cooling system all looked top notch, I thought the tread on the first 2 sets you printed didn't look to have much traction ,It got me thinking about printing my own wheels if I can find the foam that's the right density/composite for the tyres. Watching your videos really is still inspiring after all this time- Stay well, All the best.
@kenricknelson310 Жыл бұрын
Bro are you serious??? The way you built this car is AMAZING😲😲😲👍👍👍💯💯💯
JohnnyQ90
Рет қаралды 179 М.
WORLD´S LARGEST RC AIRWOLF BLACK BELL-222 ELECTRIC SCALE 1:3.5 MODEL HELICOPTER FLIGHT DEMONSTRATION
RC MEDIA WORLD
Рет қаралды 49 МЛН
František Hajdekr
Рет қаралды 548
Misha Charoudin
Рет қаралды 61 М.
刘木头LiuMutou
Рет қаралды 6 МЛН
Infinity Circus
Рет қаралды 10 МЛН
RIHAN ARMY YT
Рет қаралды 12 МЛН