Four Different Ways to Get a Glow in the Dark Tumbler

Рет қаралды 14,407

Жыл бұрын

I was asked to make a glow tumbler using glow powder, something I don't do very often! So here it is, 2 different glow powder cups and 2 other glow methods. And they all look pretty darn glowy in the end, if you ask me! The halloween gods laughed and laughed and laughed.
Check out my new channel: Luxinda's Other Obsessions:
/ luxindaspaperotherobse...
Check out some of the items I've made, listed in my Etsy store:
www.etsy.com/shop/LuxindaSwirl
Amazon Prime credit card* (earns 5% rewards): www.amazon.com/dp/BT00LN946S?...
=====Ways to help and support my channel or any other KZfaqr's channel=====
***Like a video, share a video, subscribe to the channel
***The "Super Thanks" button directly underneath the video (where the like 👍 is, then to the right -- look for the 🤍 with a $ in it) allows you to directly support your favorite KZfaq Creators.
***www.buymeacoffee.com/LuxindaS...
MATERIALS USED IN THIS VIDEO*:
KS Resin Liquid Stone Ultra UV: bit.ly/2N4JX3i (Coupon Code "LuxSwirl" for 5% discount)
Tumblers Epoxy resin: amzn.to/3KtNuEF
Glow powder: bit.ly/3AwC5iU
Aleene's Tack It Over & Over: amzn.to/3QZ3Jft
Rustoleum glow spray paint: amzn.to/3Kr5zTQ
Hiipoo waterslide paper: bit.ly/3quMCaR 10% code "LUXSWIRL"
or on Amazon: amzn.to/348G6hz
Waterslide full wrap artwork: (currently unavailable - sorry!!)
Green glow sublimation tumbler: rwrd.io/8otctdj?s
==Other Materials I prefer*, with Discount Codes:
WOODES GOODIES, 10% discount on most items use code "Luxinda":
www.woodesgoodies.com/
MAKERFLO tumblers: bit.ly/3FJsIyR
NEATO printable vinyl: bit.ly/3lHM9hw
T-REX alcohol inks: bit.ly/3J7hODc
FOILS Artistic Painting Studio: bit.ly/3o4AwDJ 10%Discount "Luxinda"
ZURI silicone molds: bit.ly/3w84kSZ
Hiipoo waterslide paper: bit.ly/3quMCaR 10% code "LUXSWIRL"
or on Amazon: amzn.to/348G6hz
Hiipoo sublimation paper: amzn.to/3R3jOAy 10% code "LUXSWIRL"
Hiipoo sublimation ink: amzn.to/3C9ri0J 10% code: 4JEC46CV
* As an Amazon Associate I earn a small commission from qualifying purchases, at no extra cost to you.
#glowtumbler #glittertumbler #halloweentumbler
Luxinda (Cindy) Deskins
PO Box 974
Ranson, WV 25438-4974
Lux.Tumblers@gmail.com
** Efforts I Strongly Believe In **
Getting plastic out of our oceans -- teamseas.org/
Emergency food relief -- wck.org/
Music in this video:
Industrial Music Box by Kevin MacLeod is licensed under a Creative Commons Attribution 4.0 license. creativecommons.org/licenses/...
Source: incompetech.com/music/royalty-...
Artist: incompetech.com/

Пікірлер: 154

@Luxinda Жыл бұрын

What’s your preferred way to create a glow in the dark tumbler??

@Wickedkittin Жыл бұрын

The most fun one I did was mixing various colours of glow powder into neon glitters to make a tumbler inspired by Sally Ragdoll's dress in NBC. That I stuck on with Mod Podge. Usually I do a glow in the dark spray paint or mix the powder into resin.

@Luxinda Жыл бұрын

@@Wickedkittin ooooh, that sounds very cool!!

@patriciamnosselliott1893 Жыл бұрын

Spray paint!

@RaesTurquoiseTurtle Жыл бұрын

The hogg and makerflo sub ones are so bright you can basically use them as a flashlight and just so easy to grab and go. But I actually think glow vinyl is pretty easy and consistent. The powders sometimes frustrate me 🤣 but I have a ton...

@Luxinda Жыл бұрын

@@RaesTurquoiseTurtle I don’t think I’ve ever used the vinyl - I have some, just sitting in a drawer 🙄🙄🙄🤣

@Dmedgin7 Жыл бұрын

Absolutely love the graphic. I’m pleasantly surprised at how similar all of the methods came out

@Luxinda Жыл бұрын

Thank you!! 😊😊 I think glow powder has come a long way in its glowiness 🙄🤣 I didn’t used to find it very effective, but that may also have been my inexperience with it at the time.

@kendall5523 Жыл бұрын

I'm so happy you did a video on this! I've been wanting to do one, have ALL the glow products, but just didn't want to do it in a method that made them splotchy. Now I know. Most informative video I've watched since starting 2 years ago. Thank you!!

@Luxinda Жыл бұрын

Thank you so much!! Good luck with your glow 😊😊

@xirtanimodiyotonka7731 Жыл бұрын

I love them all. Thank you for showing options.

@Luxinda Жыл бұрын

Thank you!! 😊😊

@lennescustomcreations Жыл бұрын

Thank you so much for doing this!!! This helped SOO much

@Luxinda Жыл бұрын

Thank you - I’m so glad it was helpful!!🥰🥰

@ocdogmomreviews697 Жыл бұрын

Very cool tutorial. Thanks for that. It's exactly what I was looking for!

@Luxinda Жыл бұрын

Thank you!! Glad it was helpful!😊😊

@tinawaller37 Жыл бұрын

Thank you for this video. So informative!

@Luxinda Жыл бұрын

Thanks very much!! Glad it was helpful!

@robinlosee3411 Жыл бұрын

Awesome! Thanks for showing four different methods!

@Luxinda Жыл бұрын

Thank you!! Sure thing 😊

@cathyhall7457 5 ай бұрын

Amazing results ❤❤

@Luxinda 5 ай бұрын

Thank you!!😊

@naomiward5573 Жыл бұрын

Thanks for sharing. I didn’t think they be so similar. Amazed!!

@Luxinda Жыл бұрын

Thank you!! I was pleasantly surprised by how well they all turned out! 😊

@jmeeks78 Жыл бұрын

That’s so awesome. Thank you soo much for sharing this with us you are awesome for doing this. And they look adorable 🥰 love them. ❤️❤️

@Luxinda Жыл бұрын

Thank you very much!! 😊😊

@AngieO68 Жыл бұрын

Great video. Thank you for making this

@Luxinda Жыл бұрын

Thank you!! 😊

@prptink Жыл бұрын

How cool is this! Awesome job. They are all gorgeous. I love the tack it method for sure. Thank you stay blessed 🥰

@Luxinda Жыл бұрын

Thank you!!😊😊

@ArtByFancyNancy Жыл бұрын

wowww. totally impressed at the glow you got from all 4 options. they were all equally glowing at a decent level. sooo cool! thank you for doing this!

@Luxinda Жыл бұрын

Thank you!! Sure thing - hope it’s helpful 😊😊

@maryeaves4195 Жыл бұрын

Thank you so much!!! Just wanted I needed to move forward with my glow cups. 😁❤️

@Luxinda Жыл бұрын

Thank you!! Glad it was helpful! 😊😊

@susanplunket2717 Жыл бұрын

Watching you sparked an idea of different glow powder on a cup like a coffee swirl tumbler! Now Ive got to try! Thanks

@Luxinda Жыл бұрын

Happy to help 😁😁 have fun with it!!☕️

@Sulzie65 Жыл бұрын

Love the graphic. All 4 glow well. Great comparison video. Super cute tumblers.

@Luxinda Жыл бұрын

Thank you so much!!😊😊

@CrystalWilliams-rt3zm Жыл бұрын

Omg Cindy These turned out GORGEOUS and AMAZING Thank You For making this video showing us how to make glow cups four different ways I Love Your videos and I Love The Music you choose Your Awesome and Amazing ❤️‼️❤️‼️❤️

@Luxinda Жыл бұрын

Thank you so much!!!😊😊

@winonataylor9978 Жыл бұрын

These look so cool. I mixed some glow pigment powder directly into some mod podge when I made some glow glass cans. Made kind of a gel consistency that was easy to paint on. I blow dried mine to make drying time go a little faster as well.

@Luxinda Жыл бұрын

Thank you!! That's a great idea!

@kathleenscattaregia1620 Жыл бұрын

Thank you for doing this video. I have been stressing over doing a cup that won’t be completely covered with glow in the dark and I think you have shown me the way to go! And btw, the music is perfect for this video. Love it!

@Luxinda Жыл бұрын

Thank you!! Glad it was helpful!😊

@lilaflohr602 Жыл бұрын

To me, it looks like one is not better than any of them. Thank you for this! It really helps out considerably! I love when you do comparisons, it helps me to determine what I want to do. Love ya!! ❤💛💚💙💜🌠

@Luxinda Жыл бұрын

Thank you!! Glad you found it helpful!😊😊

@patriciamnosselliott1893 Жыл бұрын

All 4 came out great. Same amount of glow. Loved your music choices, very appropriate. I have only ever used the spray paint, I guess for me it's just easier to obtain. And you proved that it works just as well. Thank you for that! Because of you, I did my first ever waterslide and it came out awesome. So thank you for that, too! 🙃🙂

@Luxinda Жыл бұрын

Thank you!! Yay on the waterslide!!! 🥳🥳

@sherrihammack5403 Жыл бұрын

Love the tumblers!! They all turned out awesome!! Love the sparkle!!

@Luxinda Жыл бұрын

Thank you!!😊😊✨✨

@sherrihammack5403 Жыл бұрын

You are very welcome!! Love that you reply!!

@RaesTurquoiseTurtle Жыл бұрын

These all worked great! I have one A few ofbthose coffee drink character images in the works as well because they are sooo cute!

@Luxinda Жыл бұрын

Thanks! I look forward to seeing them!!!

@Goldie1201 Жыл бұрын

Thank you so much for this video. I think the tack it method is a brilliant idea. I’ve mixed it in resin before and used the spray paint but didn’t love the results of either of those methods. I definitely need to try the tack it one.

@Luxinda Жыл бұрын

Thank you!!! I’m not sure why I had never thought to try it before - I guess it’s just most commonly used for holo glitter so that’s usually what my brain thinks of 🤪

@patriciagregorowicz8141 Жыл бұрын

They all turned out pretty similar. Very cute waterslide. I have glow powder from GC in different colors of glow. II like the resin method. Working on stuff for a craft show. Thanks Cindy 👏👍😊

@Luxinda Жыл бұрын

Thank you!! Yes, I was pleasantly surprised by how fully glowy each of the methods looked at the end 😁😁

@truefemale66 Жыл бұрын

I Love them!

@Luxinda Жыл бұрын

Thank you!!😊

@sandyhardman2268 Жыл бұрын

I’ve had glow powder for a couple years. Never used. Thx for your info!!!! Those all are neat!

@Luxinda Жыл бұрын

Thanks for watching! Have fun with the glow powder!!!

@wintrydragon Жыл бұрын

yep yep great video... i just went crazy and bought a bunch of glow hogg tumblers...i think now i want more..you're awesome by the way 🥰

@Luxinda Жыл бұрын

Thank you so much!!🥰🥰🥰

@margaretsmith7284 Жыл бұрын

OMG LOVE THEM

@Luxinda Жыл бұрын

Thank you!!😁

@joycepugh5347 Жыл бұрын

Cool - this is good to know - thanks for the awesome share have a great weekend

@Luxinda Жыл бұрын

Thank you!! Enjoy your weekend too!! 😊😊

@sherryk5313 Жыл бұрын

That was awesome thanks

@Luxinda Жыл бұрын

Thank you! Glad you enjoyed it 😊

@MDGlasspainter Жыл бұрын

So super cute.

@Luxinda Жыл бұрын

Thank you! 😊

@stacy_thecraftycat6611 Жыл бұрын

These all look awesome! A fifth way and one I like to use as well is glow in the dark glitter. Glitter Makes It has a large selection of different ones both fine and chunky and I think I have them all. lol

@Luxinda Жыл бұрын

Thank you!! Yes, absolutely ✨✨✨

@daniellewhite7096 Жыл бұрын

I think I like the glow sub cup best, but they all look great!

@Luxinda Жыл бұрын

Thank you!! It’s definitely the easiest 😊😊

@kimsnyder8997 Жыл бұрын

I think the tack it method came out the best. It’s more vibrant in my opinion. The spray paint has a more muted color to it if that makes any sense. That’s just my take on them.They all turned out great though.

@Luxinda Жыл бұрын

Thank you!! 😊😊

@gourdhead22 Жыл бұрын

Great comparison. Thanks for video...hugs Sheryl 💙🎨💙

@Luxinda Жыл бұрын

Thank you!!!! Thanks for watching!😊

@staceysmith375 Жыл бұрын

Great tutorial! I always enjoy watching your videos. Thank you for your time in showing these comparisons. Did you spray alcohol into wet epoxy?

@Luxinda Жыл бұрын

Thank you!! Yes, I tend to mist with 99% alcohol to pop bubbles after applying resin to most of my tumblers. The only time I use any heat now is my heat gun on alcohol ink tumblers mostly to encourage movement of all the swirls.

@christineking7469 Жыл бұрын

Look how they sparkle just in the snow

@kimsnyder8997 Жыл бұрын

when I mix my tack it with water, I don’t measure. I just go by consistency. Comes out perfectly. The cups are amazing as always.

@Luxinda Жыл бұрын

Thank you!! Yeah, I agree - I try to impart the idea that a strict measurement or ratio isn’t really a rule that *must* be followed, more of a general guideline. 😊😊

@wtglb Жыл бұрын

They all look very close, but I’d have to give the slight edge to the sub cup. Very cool though!

@Luxinda Жыл бұрын

Thanks! It definitely wins just for the ease factor 😁

@amyaustin513 Жыл бұрын

this is amazing. Thank you Cindy. Just from looking at the finished video, it looks like the tack it method looks the smoothest and the brightest, is that what you found?

@Luxinda Жыл бұрын

Thank you!! Yes, I would say that's the overall takeaway, although the glow/sub tumblers are pretty good, too (and easier, obviously). I was very pleasantly surprised by the tackit glow's look and consistency!

@pennys7317 Жыл бұрын

Learned a lot but was wondering why you put the alcohol spray on the resin tumbler. I had never seen that before. Awesome job!!!!!

@Luxinda Жыл бұрын

Thank you!! I prefer misting with 99% alcohol to pop bubbles rather than using a torch or heat gun. It’s just personal preference 😊😊

@wendyrobinson249 Жыл бұрын

Thanks for doing the experimenting for us. The sub cup seems the way to go as far as being the simplest. Spray paint is too yellow. Tack it is a great idea and looks like it eliminates the blotchiness you can get from putting the powder in resin.

@Luxinda Жыл бұрын

Sure thing!! Excellent assessment! 🥰🥰

@dowarnette Жыл бұрын

Looks like with the spray paint does give it a green look even in daylight. The others still looked white with a very faint green tint. Thank you for this experiment.

@Luxinda Жыл бұрын

Thank you!! Yes, I would agree that when a white tumbler is coated with the glow spray paint, it’s definitely not white anymore. Plus, being next to cups that do look white makes it even more obvious 😁

@luxinastarchild8875 Жыл бұрын

Scented Expressions Supplies has glow powder. They have a peach and orange red thats absolutely amazing!

@Luxinda Жыл бұрын

Good to know! Thank you!!

@nancyjette7 Жыл бұрын

I have one sitting here editing for a decal or whatever. I used a glow vinyl sheet and i have a large tattoo to put it on .

@Luxinda Жыл бұрын

Oh, that sounds great!!! I thought about vinyl but opted not to try it here just because I’ve never done a glow cup that way before. I bet it’ll look wonderful with the tattoo on it!!

@savagetwin52 Жыл бұрын

I haven't done one yet, I think one with a Christmas theme might be interesting. Although I bought some waterslide paper a while ago, I lost my nerve. Must have something to do with the water. But I gonna try. I found some glow in the dark powder in the clearance section in Michael's. They were so cheap, I didn't say a word. No yippee or anything cuz other customers will sneak up on you and grab for themselves not even knowing what it is🤣. So, I think I'll just try it with a name. Thanks for the inspiration 🥰

@Luxinda Жыл бұрын

Thank you!! Go for it!! And congrats on the great find! 😊😊

@heidiewing6566 Жыл бұрын

I super duper enjoyed this tutorial because I had so many question....with my own products sitting here and didn't quite know how to use! I have one final question. How long does the glow from the sunlight last? I hope you answer ~even if it's just a guestamate. Thanks for this answered tutorial from another!!

@Luxinda Жыл бұрын

Thank you!!! The glow can actually last quite awhile, although it keeps fading. I would guess you would keep seeing it for about 20 minutes before it fades out completely, but I’ve never actually tested it.

@michellesweet667 Жыл бұрын

Very cool have you tried with glow paints by folk art..I have some but not sure how to use on a tumbler

@Luxinda Жыл бұрын

Thank you!! I have used those but not since I switched to tumblers. I used the FolkArt glow paint back when I was mostly paint pouring, and I was never very impressed. That doesn’t mean it wouldn’t be good on tumblers, but my guess is you’d get a better overall application and coverage with glow spray paint than a brush on paint (but that’s just a guess).

@pennys7317 10 ай бұрын

I saw you spray something on to the cup that you use the powder and resin but I couldn’t tell what it was that you sprayed and why you sprayed it. I’m relatively new at this and I am trying to learn you did an awesome job by the way.

@Luxinda 10 ай бұрын

Thanks!! Yes, after I applied the layer of resin with glow powder mixed into it, I misted the entire cup - once all the way around - with 99% (or 91% if that’s what you have) isopropyl alcohol. A lot of people use either a torch or a heat gun to pop bubbles in resin once it’s on the tumbler, but I prefer misting with alcohol - it just works better for me. This is the misting sprayer I use: amzn.to/3RHwnVO

@Artiefrog Жыл бұрын

The glo sub cup was a little brighter glow to me but all looked nice

@Luxinda Жыл бұрын

Thanks! Just some different options -- the glow sub cup is definitely the easiest and probably also the most consistent glow over the entire cup 😊

@dorleejohnson8506 Жыл бұрын

Thank you so much doing this video I have a request for a glow n the dark tumbler and I was wondering which method was better. One of the cups had a yellowish tint to it can you tell me which method that was?

@Luxinda Жыл бұрын

Thank you!! Yes, the yellowish one was the spray paint cup - it’s not drastic but definitely no longer white 😁😁

@allijmccoy Жыл бұрын

I love this and thank you for showing us the different ways!! I’ve got a couple questions, hopefully not to annoying. Is there a reason you stopped using the Marabu Rainbow Additive? And lastly, which cup do you prefer out of those 3? If say one didn’t have a sublimation gid cup.

@Luxinda Жыл бұрын

Thank you!! Not annoying at all 😊 I still use the Rainbow alcohol ink, but I noticed awhile ago that it really doesn’t show up much unless it’s on black, so that’s why I started using the 504 for everything that’s not black, so the sparkle actually shows up. If I didn’t have the glow sub tumbler … ? I’m so used to using the glow spray paint that I’d probably choose that just because I’m so familiar with it. But I think once my glow spray paint stash is used up, I’ll switch over to the powder with tackit - I was really impressed with how that turned out! Great questions!!

@allijmccoy Жыл бұрын

@@Luxinda thank you so much! That helps me so much!! I do have about 1/2 can of glow left over from a separate project for my sons room so ima try that! I do have glow powders and I love this tack it method, so ima definitely try that!! And I also have 504 from mng I just didn’t know that it was as awesome for showing up on non black surfaces!! Thanks again Candy I love your videos and your advice and input!!!🫶🦋🔥

@Luxinda Жыл бұрын

@@allijmccoy thank you!!! 🥰🥰

@jurissafebrescraftingspot2162 Жыл бұрын

Lv it

@Luxinda Жыл бұрын

Thanks!😊

@a.ielimba78 Жыл бұрын

I'm gonna make a 7 inch pyramid, how much glow powder should I use ?

@Luxinda Жыл бұрын

Wow! That’ll be amazing!! I don’t actually know the calculations for a solid piece like that. I mean, technically you can add as much glow powder as you want - there’s really not a limit. But at some point, there’s probably an amount beyond which the final piece won’t glow any brighter, if that makes sense. Ok, if you already know how many ounces of resin you’ll need for a 7” pyramid mold, I would suggest - and this is just a guess - 10% glow powder. So say the mold requires 10 ounces of resin, you’ll mix in 1 ounce of powder. OR you could do an experiment first with a much smaller amount, like get a silicone ice cube tray, mix up resin to fill several cubes of the tray, and mix different amounts of glow powder into each cube (10%, 20%, 30%, etc). After the resin sets up, test the cubes under UV light and decide which you like best. Then use the same ratio of powder to resin for the entire pyramid mold. Hopefully this makes some sense. Good luck!!!! I’d love to hear how your pyramid turns out!!

@Wickedkittin Жыл бұрын

The tack it probably looked the closest to the sub cup, but they all look awesome! On a side note, the music woke up the husband-creature and he muttered something about "Bach, nice". I was a bit confused because I just associate it with Dracula! 🤣

@Luxinda Жыл бұрын

Thank you!! 🤣🤣 kudos to the husband-creature for knowing his classical organ music 🎶

@janebellco Жыл бұрын

When prepping the Hogg Glow cup, do you do anything to prep the cup?

@Luxinda Жыл бұрын

I wipe it down with 91% or 99% isopropyl alcohol, but that’s all. However, if you’d prefer to sand it, then that’s fine, too. Another option is to clean it with alcohol and then spray with matte clear spray. I know I’m not providing a cut-and-dry answer, but I have yet to see actual proof that one method works better than others. I think it’s whichever method you’re most comfortable using. Thank you for the question!!

@marilynjohnson2488 11 ай бұрын

I have done power in epoxy and I get streak lines. How do I get rid of those?

@Luxinda 11 ай бұрын

Well, in this case, after I applied the resin with glow powder mixed in, I misted the whole cup with 99% isopropyl alcohol. That usually evens everything out, but you’ll need to test it to see if it works as well with your particular resin.

@luxinastarchild8875 Жыл бұрын

Do you have to put epoxy over them in order to sublimate on them?

@Luxinda Жыл бұрын

Actually, no - once there is epoxy resin on a tumbler, then you can't do sublimation. Only the sublimation tumblers straight out of their box -- with nothing on them yet except the layer of polyester added by the manufacturer -- can be sublimated. So none of the 4 tumblers in this video were actually used for sublimation at all.

@MsBLHaley Жыл бұрын

What is the 504 that makes is sparkle, where do I buy this?

@Luxinda Жыл бұрын

Thanks for the question 😊 504 is a glitter sold by Mr. Nola’s Glitter. Here’s the link: bit.ly/3A1AIdB

@amyfarr1120 5 ай бұрын

What type of sandpaper did you use to sand the tumblers?

@Luxinda 5 ай бұрын

Thanks for the question! I usually use an 80 grit sanding block from Walmart, but a sheet of 80 grit sandpaper would work just as well.

@dawntrail 10 ай бұрын

Could you engrave in the spray painted one??

@Luxinda 10 ай бұрын

That’s a great question, but I have no idea because I have never experimented with engraving so I’m not sure what would happen. I’m sorry I can’t be more helpful.

@daniellewhite7096 Жыл бұрын

When you order from Ali express, how much do you have to order?

@Luxinda Жыл бұрын

Usually just one of anything. If there’s a different minimum, the listing should say so.

@christineking7469 Жыл бұрын

Where do you get the spray bottle for the rubbing alcohol and the metal stir sticks please,,thank you

@Luxinda Жыл бұрын

Sure, here's a link to the ultrafine mister: amzn.to/3CcJ7M3 and here's a link to the metal stir sticks: amzn.to/3LHvpUs

@christineking7469 Жыл бұрын

Thank you

@teenamckinney1753 Жыл бұрын

Did you also add epoxy to the cup that came ready to go? I literally hate the feel of those glow in the dark tumblers.

@Luxinda Жыл бұрын

Yes, to keep this a somewhat level playing field for the comparison, I resin’d all 4 tumblers.

@rubyrobles7955 Жыл бұрын

How do I activate my glow in the dark cup? I left it in the sun? Not working

@Luxinda Жыл бұрын

That could be a problem - the thing that usually happens most often with glow-in-the-dark items is overexposure to sunlight or UV light, and the glow stuff loses its ability to recharge. I don’t think there’s a fix for that, not that I’ve ever heard of. I’m sorry!

@PennyStetson Жыл бұрын

I bought a Hogg Glow in the dark tumbler, but I couldn't stand the rough feel of the tumbler. Did you have the same issue or have you found a less rough option. My customer who wants them is definitely not interested in the feel of that one.

@Luxinda Жыл бұрын

Thank you - great question! I haven’t tried the MakerFlo glow sub tumblers yet, so I honestly don’t know if they are smoother than the Hogg brand. I know Rae over at Raes Turquoise Turtle has used MakerFlo glow cups, so she might be able to help you with that. If you can’t find a smoother tumbler, then another option is a layer of resin over the tumbler once the design is sublimated onto it. It works well but obviously adds to the time and cost of making the tumbler.

@tiatuck3047 Жыл бұрын

What is 504? To make it sparkle?

@Luxinda Жыл бұрын

504 is the name of an ultra fine opal white/rainbow glitter I use a lot. Here’s the link for where I get it: www.mrnolasglitter.com/products/504

@aliciabarbarini1640 Жыл бұрын

Did you put epoxy on the SSD cup before you put on waterslide?

@Luxinda Жыл бұрын

Yes, there is epoxy resin on each of the 4 tumblers before I apply the waterslides, just to keep everything as equivalent as possible. You can see that at time stamp 9:53. Thanks for the question!!

@aliciabarbarini1126 Жыл бұрын

@@Luxinda thanks.. loved your vids, and i just got 1 from SSD and wanted to make sure that I was correct that you added epoxy before.. thanks again for your vid..

@phyllisgast8357 Жыл бұрын

OMG Cindy, it is like they are duplicated even though I saw you use 4 different techniques...... I bet if you wanted them to do that it wouldn't happen LOL 😉😅👍

@Luxinda Жыл бұрын

Thank you!! I bet you’re right!! 🤣

@RainorShine1 4 ай бұрын

Im to scarer to try expoy i would love making tumblers id have 3 of each holiday an some arusim ones an breast cancer ones lol id go tumbler crazy haha.

@Luxinda 4 ай бұрын

Once you get started, it can definitely be addicting 😁

@susanplunket2717 Жыл бұрын

Buy a glow in the dark sublimation tumbler, lol

@Luxinda Жыл бұрын

Definitely the easiest way 😁😁