Four Workbench Building Mistakes (that we all make).

Рет қаралды 2,021,652

3 жыл бұрын

Avoid these common mistakes and make your first workbench last for years.
More video and exclusive content: / rexkrueger
Take the NEW Minimum Timber Bench Course!: tinyurl.com/43yfhjwb
__________________________________________
Build the Quick-Stack Workbench
My most recent bench design is portable! The Quick-Stack bench breaks down into 6 manageable pieces that can be easily moved or stored when you're not working. When you need your bench, you can assemble it in 3 minutes and the only tool you need is a mallet.
Watch the FREE Build Video: • The Portable, Affordab...
Take the build-along course: rexkrueger.retrieve.com/g/0G5...
Get the Plans: www.rexkrueger.com/store/quic...
*When you buy the course, the complete plans are included for FREE.
This course will guide you step-by-step in the process of putting together your bench. Make sure you grab the plans to follow along with:
www.rexkrueger.com/store/quic...
---------------------------------------------------------------------
Build the English Joiners Bench!: (Links Below)
Video: • The incredible English...
Plans: www.rexkrueger.com/store/plan...
----------------------------------------------------------------------
Build your own Vises!
Leg Vise
Video: • Make a big leg vise fr...
Plans: www.rexkrueger.com/store/xngn...
Build a Traditional Twin Screw Vise
Video: • Vise Squad #3: The Anc...
Add a Planing Stop & Holdfasts to your Bench
Video: • You don't need a vise ...
Plans: www.rexkrueger.com/store/plan...
----------------------------------------------------------------------
Get all the plans to build your own:
- Joiner's Bench
- Leg Vise
- Planing Stop & Holdfast
with the Complete Joiner's Bench Bundle!
40 pages, full color, only $10!: bit.ly/2QZls9T
----------------------------------------------------------------------
Become a member of this channel!
Get custom badges and emojis you can use during chats: / @rexkrueger
----------------------------------------------------------------------
Sign up for Fabrication First, my FREE newsletter: eepurl.com/gRhEVT
----------------------------------------------------------------------
Wood Work for Humans Tool List (affiliate):
Cutting
Gyokucho Ryoba Saw: amzn.to/2Z5Wmda
Dewalt Panel Saw: amzn.to/2HJqGmO
Suizan Dozuki Handsaw: amzn.to/3abRyXB
(Winner of the affordable dovetail-saw shootout.)
Spear and Jackson Tenon Saw: amzn.to/2zykhs6
(Needs tune-up to work well.)
Crown Tenon Saw: amzn.to/3l89Dut
(Works out of the box)
Carving Knife: amzn.to/2DkbsnM
Narex True Imperial Chisels: amzn.to/2EX4xls
(My favorite affordable new chisels.)
Blue-Handled Marples Chisels: amzn.to/2tVJARY
(I use these to make the DIY specialty planes, but I also like them for general work.)
Sharpening
Honing Guide: amzn.to/2TaJEZM
Norton Coarse/Fine Oil Stone: amzn.to/36seh2m
Natural Arkansas Fine Oil Stone: amzn.to/3irDQmq
Green buffing compound: amzn.to/2XuUBE2
Marking and Measuring
Stockman Knife: amzn.to/2Pp4bWP
(For marking and the built-in awl).
Speed Square: amzn.to/3gSi6jK
Stanley Marking Knife: amzn.to/2Ewrxo3
(Excellent, inexpensive marking knife.)
Blue Kreg measuring jig: amzn.to/2QTnKYd
Round-head Protractor: amzn.to/37fJ6oz
Drilling
Forstener Bits: amzn.to/3jpBgPl
Spade Bits: amzn.to/2U5kvML
Work-Holding
Orange F Clamps: amzn.to/2u3tp4X
Screw Clamp: amzn.to/3gCa5i8
Get my woodturning book: www.rexkrueger.com/book
Follow me on Instagram: @rexkrueger

Пікірлер: 2 500

@Marc83Aus 3 жыл бұрын

My biggest mistake is watching a dozen workbench videos and not even starting a workbench build.

@WigglesNation 3 жыл бұрын

mine too :(

@Packless1 3 жыл бұрын

...good point...!

@jibcot8541 3 жыл бұрын

Watching workbench gang here! I sometimes chisle on my foldable workmate and just try and hold it from moving with my legs!

@richardpaulhall 3 жыл бұрын

How about not having space for a workbench?!

@candicewaller403 3 жыл бұрын

Same

@TheCaptainmaim 3 жыл бұрын

Rex, I built your version of the English Joiner's Bench least year, and it's been great. If anyone is considering a bench for hand tools, I was a complete beginner and built that bench with minimal swearing.

@RexKrueger 3 жыл бұрын

A little swearing, I'm sure!

@aaronstanley6914 3 жыл бұрын

This video and your comment came at the perfect time! I was researching what bench I should make for my shop and was almost ready to make the English Joiner's Bench when I noticed that Rex had to plane down the top of the bench in his "The LEGENDARY Six-Board Chest" video. This made me paranoid about making the Bench, I wasn't sure of other undisclosed problems I would encounter with the bench. I assumed Rex Would inform people about addons/updates to the project in the original video's description or Comment section. but looking into it now I realize that's, not the case. this made me seriously reconsider making the bench. but now that he created this video I feel that I can pursue it again. Quick question, on a semi-related note. in your opinion, do you think that adding an embedded Router like in this video from the YT Channel The King of Random named "Make a Flush Mount Router Station!" is a good idea?

@the_attic_woodworker 3 жыл бұрын

@@RexKrueger swearing came when I used my saw on both my thumbs and destroyed one of my toe nail with the first leg assembly, but I still ove my bench

@CONEHEADDK 3 жыл бұрын

You gotta swear man. Fucking nice, bloody good, damn near perfect, aso..

@SugarCreekWoodwright 3 жыл бұрын

Built the bench myself modified the half laps for full length runners for a shelf and love it

@BibleMoth 3 жыл бұрын

0:23 Overview/breakout of main issues 2:29 Problem 1: Joinery 8:56 Problem 2: Work holding 11:57 Problem 3: Sizing 14:20 Problem 4: Adaptability

@stevenrosbury7341 Жыл бұрын

Thx ;-)_?

@johnwiks2597 7 ай бұрын

Not all heroes

@blaiketillman3691 6 ай бұрын

Wear capes.

@b33ft0n6 Ай бұрын

P@@blaiketillman3691

@jamesmunro9661 2 жыл бұрын

I loved this. Also, I feel like Rex is the animated version of the Lockpicking Lawyer. Not an insult at all, just to be clear.

@khill8645 2 жыл бұрын

"Now in order to build this workbench, we're gonna use this joinery jig Bosnian Bill and I made..."

@stanislavpres 2 жыл бұрын

It's the way he talks...

@christopherbullock2644 2 жыл бұрын

That’s all I have for today…

@waynedavis3956 2 жыл бұрын

Oh Man, you just freaked me out, Rex sounds just like him. They might be related.

@jack002tuber 2 жыл бұрын

Now I can never unhear that again

@jaystang4042 3 жыл бұрын

I was just at my “bench” thinking about how counter productive it is. When I built it I had power tools, but quickly realized I HATE all the racket.. so very early on I moved to all hand tools, and have been “improvising” work holding as I go, not realizing what a GIGANTIC problem is really is.. every build, I need to whip up some other half baked idea on how to hold a component.. my solution? Lay on the couch and watch Rex justify EVERYTHING wrong with my bench..

@davidcurry7801 2 жыл бұрын

I'm glad to see that I'm not the only one who is just turned off by the noise of power tools. I sometimes dread going to the next step of a project because of the noise of the saw or thickness planer.

@fishhuntadventure 2 жыл бұрын

Hearing protection? I understand where you guys are coming from but there’s so many useful sometimes even non-standard ways of using a router, jig saw, band saw, and table saw I just couldn’t put those into retirement. I don’t actually use my routers that often now that I think about it, but when I reach for one I’m very glad it’s there. Noise is temporary.

@johnbesharian9965 2 жыл бұрын

@@fishhuntadventure, Yes, "Noise is temporary". So is hearing loss, until it ain't. [Old, 'Experienced" guitarist here.]

@pecker556 3 жыл бұрын

"The more woodwork I do, the more I kinda become a grumpy, old traditionalist". Haha! Love it!

@crcurley 3 жыл бұрын

Love you too.

@harimuzumdar8269 2 жыл бұрын

ha ha, yes, evidence of hard lessons learnt, painful rework, frustrating fails, reluctant compromises... oh it pains me just thinking of it. and i'm not even a weekend woodworker... more like a year-end one. it would take me two more lifetimes to get to Rex's level. ah well...

@julienthiriet4638 2 жыл бұрын

Smart/modern way of tenons would probably been using few dominoes.. probably not as good as a well done tenons and mortise but surely less worrying. But maybe not that beginners to be able to buy the machine like that before building a bench

@rw7532 2 жыл бұрын

Lol. Isn’t that pretty much true about any walk of life? I remember the grumpy old salty Marines, the veteran teachers at my school, the guys I the barber shop…etc. now that I’m 54 I’ve crossed over to that side of the street..umm….lawn and see my grumpyness with all this new fangled stuff grow.

@RicardoCristofRemmertFontes 2 жыл бұрын

Same here.

@user-ub4fx5lq4n 9 ай бұрын

I've (literally) hundreds of KZfaq on making workbenches. Out of all of them, this one has been the most thoughtful and helpful. I have a unique need in my workbench and, by clearly explaining the "why" of things, I'll be able to modify one of the hundred designs successfully (or at least know what will be a problem down the line). Thank you Rex, and God bless.

@Tom-hz9oc 2 жыл бұрын

I’ve built a few work benches and your recommendations are great! Like all others, my benches have needed something added in a short time. The reduced width is sure going to save my back when I build my new shop this summer! Thank you!

@williammaxwell1919 2 ай бұрын

Each time we "rebuild" a standard workbench, we resolve problems we have previously identified and add new problems for future resolution 😂

@Tom-hz9oc 2 ай бұрын

@@williammaxwell1919 Very true! And the added weight just makes it harder to move.

@RobMacKendrick 3 жыл бұрын

Now wait a minute. You're telling me that those old woodworkers who apprenticed at 13 and spent their entire lives building complex stuff out of wood knew more than me about woodworking? That's impossible, Rex. I own a car and a TV and an iPhone. No way some primitive lamplit dude knows more than me! (I'm also a history teacher and bang my head against this malarkey every day.)

@johnbesharian9965 3 жыл бұрын

You, my dear Horatio, are probably amongst the very few who would appreciate this observation: “In 100 years we have gone from teaching Latin and Greek in high school to teaching Remedial English in college.” -Joseph Sobran. And this one: "However beautiful the strategy, you should occasionally look at the results." --Sir Winston Churchill, British prime minister

@chipsterb4946 2 жыл бұрын

@@johnbesharian9965 2 excellent quotations!

@jakedoom8807 2 жыл бұрын

i use to think i knew everything, now i just watch youtube videos and have learned that i know reality is fake, only back pain is real

@NeedsMoreToys 2 жыл бұрын

You forget to mention your sharp wit and command of sarcasm.

@rw7532 2 жыл бұрын

@@johnbesharian9965 I am a history teacher also. I see the wisdom and truth in both quotes. In fact, I a. Going to print them in llarge font and post them behind my desk.

@propertystuff7221 3 жыл бұрын

Candidness about mistakes is what makes this channel authentic. Thank you!

@eugenetswong 3 жыл бұрын

I agree, because it builds his credibility. He helps us to avoid important mistakes, based on common sense and experience. That's something to be proud of; not ashamed.

@eugenetswong 3 жыл бұрын

@CAD Thinking good call! I never thought about him "lying" to us. :-D I wonder how many times he has to refilm, because keeps accidentally getting it right. :-D

@ulysses2138 3 жыл бұрын

An old fashioned English joinery bench is between 5 and 6 fet long and has an open ended well running down the middle deep enough to take most hand tools and is easy to clean off with a hand brush, I was taught on one in the early 1970s. My father was tought on one in the 1930s and still used one at work in the 1990s when he retired. they also usually have a vice mounted at opposite ends on the sides, anything too big for these is held with a clamp or easy to make bench hook, they also have cupboards underneath for the most used tools

@jonway7845 Жыл бұрын

I also built Paul Seller's inspired bench as a novice. I had the plans and watched his series step by step as I progressed through the build. Building it taught me quite a bit by having the hands on experience and the understanding of how the joinery works and functions.

@CalmBeforeTheStorm76 2 жыл бұрын

Rex, I'm currently building my first workbench. This video gave me a lot to think about, as I know I've absolutely made some of the same mental mistakes by assuming new technology would *have to* prevail over something older. Thank you for preventing me from making at least a few mistakes I know I'd be cursing years after I made them!!

@williammaxwell1919 2 ай бұрын

Choosing to learn from our mistakes is the sign of a person who wants to be better than they currently are. This applies not only to woodworking but especially to life. Also, learning from the mistakes of others is rare in our current woke zeitgeist.

@mongocrock 3 жыл бұрын

"the more I woodwork the more I become a grumpy old traditionalist"... Same. I wouldn't call it boring though. Just wisdom.

@ColonelSandersLite 3 жыл бұрын

Wisdom is boring. The energy of youth is secretly really just hardheaded stupidity!

@johnbesharian9965 3 жыл бұрын

@@ColonelSandersLite, Reminding me of my favorite Faint Scotts Praise: "I am strong minded and you are stubborn. However, they are pig-headed". (Which are three ways of saying the same, exact thing.)

@khogg3581 3 жыл бұрын

For those new to joinery, mortise and tenon isn’t as intimidating as it may seem. I recommend you jump right in. The process of refining your skill is a fun adventure.

@tenaciousjeebs 3 жыл бұрын

It also doesn't need to be a *through* at all. 1/2-2/3 of the way through the leg, throw in a couple drawbore pegs and you'll have the strongest possible joint for a bench.

@bennyhaha43 3 жыл бұрын

Go Sounders!

@AtypicalADultHooD 3 жыл бұрын

Also, a bench is closer to house framing than furniture making. The tolerances don't need to be super tight. My Low Roman Workbench is nothing to look at. I made it with through tennons that are as ugly as they get. It is tippy, but it doesn't rack at all.

@nedshead5906 3 жыл бұрын

Challenge accepted

@grumblycurmudgeon 3 жыл бұрын

A worthwhile revision to consider that adds VERY little complexity to a mortise and tenon, but which gets far less play is the "WEDGED Mortise and Tenon" (there's a million videos on it). These are cut identically to the normal on, but you make your tenon (the piece that passes through the mortise) about 2 inches longer. Then, once you've inserted said tenon, you cut or drill a hole in the tenon, such that one side of said hole is coplanar with the outside of the piece you cut your mortise through. a wedge shaped rod, dowel, or piece of square stock is then sunk. into that hole. This carries the added benefit of exerting lateral, tightening force on the tenon, pulling it in MORE tightly to the mortised piece. It also make for very easy disassembly: pop out the wedge, the tenon is freed, pull it back out of the mortise. "Whatever," you might be thinking. "I'm making this a forever bench and I'm gonna GLUE this bad boy together." Capital! because you know what's really awful? Having a joint held EXTREMELY tightly and ENTIRELY flush while your glue dries. I sure do hate it when that happens. "I need the the exterior edge to be FLUSH!" No problem. The great part about this technique is one that glue is set/you've added any additional mechanical fastener you intend to, grab your ryoba or a flush-cut saw, and hack it right off, wedge and all. You'll still have gotten the value of the tightness without purchasing a 10-foot pipe clamp. I'm not saying it's the only way to do these things, but it's easy, cheap, and you can use the OFFCUTS you got from MAKING the mortise and tenon AS your clamp! Just saying.

@dustinharber3744 10 ай бұрын

My first workbench was 2 matching dressers placed back to back with some plywood placed on top and then covered with some second hand laminate flooring to make the surface smooth and uniform. It worked amazing and if I still had the same space for a setup with my bench in the middle of my shop, I'd still be using it. My new workshop space is significantly smaller and I've gone with a kitchen base cabinet against the wall with a top made out of 2 pieces of reclaimed maple that are jointed, planed and finished with a laquer of some sort. This video and others like it are great but sometimes you just have to go with what you can achieve for the budget and space. Don't feel bad if you can't make some amazing fancy workbench with traditional or semi traditional jointery.

@bingojamas4786 3 жыл бұрын

"I can improve on that, I'm a smart guy" sounds like almost every new supervisor I've ever had. They always think the people doing their jobs are mental midgets and proceed to implement their genius "better" way of doing things. Given enough time, the tried and true always bubbles back to the surface.

@stephend3961 2 жыл бұрын

All this is personal preference and opinion - always more than many ways to skin a cat.

@joeminpa6705 2 жыл бұрын

LOL, we just had to re-arrange our entire repair shop because of that type of thinking. Now, I am working harder than before, taking more steps, and less product is getting out.....but hey, it looks better!

@deanwoodward8026 2 жыл бұрын

Obviously they're smart, they got to be the supervisor. #PeterPrinciple

@russellritenour9202 2 жыл бұрын

@@deanwoodward8026 or the got promoted out of the way of effective people -- the dilbert principle.

@Lagged2Death 3 жыл бұрын

Your point about the way wood can compress, through time and wear, in joints based on metal fasteners, is really important, completely true, and generally underappreciated. I'm so glad you're explaining this.

@1pcfred 3 жыл бұрын

You just need to use washers to spread the load.

@Zzzrrrretttgthvt 3 жыл бұрын

Or maybe just get some joist hangers cause nonadismattas

@1pcfred 3 жыл бұрын

@@Zzzrrrretttgthvt you really cannot beat joinery when it comes to wood construction. Joist hangers are used because they save labor and they're good enough.

@cchavezjr7 3 жыл бұрын

Of course, ignoring that you can pull out 2 wrenches and retighten when it happens

@victorquesada7530 3 жыл бұрын

As someone who has an Ikea drawer that won't keep the face on anymore, I fully agree. Wood joints subjected to forces that are not in line will compress with metal squeezing wood.

@johnarnold6623 3 жыл бұрын

I made your joiners bench about a year ago. It is still rock solid and by far the best bench I have ever had. Ive seen so many benches on YT since then and nothing comes close to yours. The greatest thing I've ever made.

@michaelcambareri101 2 жыл бұрын

Thank you for making such an incredibly thorough, thoughtful video. I’m a new homeowner, and getting ready to refit the basement workshop and get rid of some of the less than ideal benches from the previous owner. I can’t wait to build something sturdy, adaptable, and pleasant to work with.

@GentlemanH 2 жыл бұрын

I am in a similar position. Fairly recently I bought an old character stone cottage in rural France and want to arrange a workshop in my basement. The above video made some points which I had not considered e.g. not too wide. Many thanks.

@ThreenaddiesRexMegistus 2 жыл бұрын

Great analysis and very methodically talked through. I’ve built a few over my 63 years and still like the wide plank top, much like your English joiners bench. I generally build them out of what is ,lying around or what can be got cheap. One of my best was an outdoor work station much like your joiners bench. The demands of space required this but you had to put the gear away every night. But having a bench beats not having one. 👍🏻

@johnbushur6080 3 жыл бұрын

Bringing on more workbench content! You’re one of the only woodworkers on YT covering it and it’s fundamental to everything we do in the shop.

@DavidKirtley 3 жыл бұрын

The biggest problem is that people start out thinking that a workbench is a table instead of a large clamping device.

@AhmetCnarOzuneUyans 3 жыл бұрын

👍👍👍

@olliecrow3547 3 жыл бұрын

My mistake exactly! Learning is always an adventure.

@andrewl3692 3 жыл бұрын

What if you don't want or need to clamp anything to it??? I'm pretty sure when you look up the definition of work bench there's no mention of clamps anywhere, see for yourself if you don't believe me

@DavidKirtley 3 жыл бұрын

@@andrewl3692 Then make a table. The whole point of the kind of woodworking workbench we are talking about is workholding. If you are working with say a hammer and a chisel, that takes two hands. Now, that is not the only solution. Many traditions use a different strategy where you sit on the workpiece to hold it. That's what the Japanese and the Romans did.

@andrewl3692 3 жыл бұрын

@@DavidKirtley work bench, not wood working bench. Not a table... What you said was wrong. You do not need a clamp for a WORK BENCH to be a WORK BENCH!!! You might want a clamp on your work bench but it would just be in the way on my work bench!! What you're trying to say is a work bench wouldn't be a work bench without a clamp!!??!! According to Webster's definition you would be wrong. So you're not arguing with me you're trying to argue with Webster's definition that's been around longer than you have. So now you sit here with your comment looking like a fool trying to argue against a dictionary!?!!? Smh... I love how old people try to act like they know everything but don't understand Google!?? No my work bench doesn't have a clamp on it and it's still a work bench!!

@MrTimesetter 2 ай бұрын

Two years later and still one of the better videos on workbench building I've seen.

@matthewshannon6946 2 жыл бұрын

Hey, Rex- I was a Union Cabinetmaker in Chicago for 22 years. We worked off of English Joiner style benches. I found your video interesting and your observations very useful! Nice Job!!!👍

@trumpetguy8371 3 жыл бұрын

My bench was my first project. It's the portable moravian workbench brought back in to popularity by Will Meyers. I love it and I learned a bunch of joinery.

@andaleandersch2833 3 жыл бұрын

Perfect timing Rex! I just started building my first workbench yesterday, will definitely implement your tips! Love your videos! Supports and shapes my woodworking philosophy!

@marcgamez3119 2 жыл бұрын

Rex, I love your videos and find them super informative. As for a work bench, I started “woodworking” about three years ago in my spare time. My first bench was a used harbor freight bench… I think you know the one. I mounted my miter saw on it and worked on it until I recently purchased a large table. Very sturdy, very old. I used these because they were the cheapest options. What I would like is a video on how to modify a large bench. What are the options and how can I make my life easier? This video already has great ideas to start with but something more detailed would be appreciated. Keep up the great work!

@Angelfacesongs 3 жыл бұрын

I recently built your joiner's bench and it's been an amazing improvement for every project, even rewiring a guitar is easier! So many thanks for the inspiration. It makes me want to toss my miter and table saw out the window, if I had windows in my basement 😂. Your 'modern' bench is very similar to what I scavanged to build my bench. That design would maybe make a good auxiliary glue up/assembly bench? Anyhow, many thanks for the insights and inspiration!

@theintelligentcarpenter9407 3 жыл бұрын

Hey Rex. I've been woodworking in my spare time for maybe a year, and I have been watching a lot of KZfaq. I really like the way you put this video together and explained things. I'll be watching from now on and going through your archives. Cheers.

@aebfroman 3 жыл бұрын

Thank you for your videos. They are the perfect blend of organized information, clean production and humor. Many times your videos inspire an idea and then act as a perfect resource to come back to. I'm glad I found your channel when I did it has helped me in many ways.

@arkansaswoodworking5913 2 жыл бұрын

Rex, great video! I wish I could do videos like you - Nicely done. I did just like you, but I had the experience to build much better. I built a personal design multi-layer plywood top, 36” wide and 4’ long, with tool storage underneath (whole other subject), and not enough overhang for any type of serious clamping - Live and learn. I got a copy of Chris Schwarz’s Workbenches - great resource like your video to guide me. I found a very cheap supply of rough cut ash. 2 months and a lot of patient chopping, handsaw, chisel, planing...I built a beautiful Holtzapffel. Mine is a little taller than knuckle height...2.5”...But, I have a serious grenaded back from the military. However, your height recommendations are spot on. I just subscribed. You might encourage me to do some woodworking again. I still love mortice and tenons and hand-cut dovetails!!! Cheers, and keep up the fantastic work and passing great knowledge.

@vladimirnekic3241 2 жыл бұрын

Thanks for the knowledge Mr. Krueger, I never realized there was so much to think about when building a work bench. Just like you mentioned, it is the Wisdom (experience) of the craft that makes you see your mistakes of the past.

@johnbesharian9965 2 жыл бұрын

LOL! If we were perfect, we'd just "Will" our creations into existence.

@TimH86 3 жыл бұрын

I love the cover pic for this video 😆 you have a talent to be goofy and serious at the same time, and your videos have made things less complicated for me. To the point where I actually got started in woodworking, hand sharpening, etc. Thank you for your efforts!

@RexKrueger 3 жыл бұрын

Thank you so much!!

@guitfidle 3 жыл бұрын

Great video!! I love your no nonsense, down to earth approach about this. I ended up saving up and buying the large entry level Sjoberg's bench when Woodcraft had it on sale. (wow, more than 20 years ago now!!) It came with a bench vise, tail vise, dogs, and a holdfast. Worked pretty well for me for several years. But then, much like yourself, I started getting in to more hand tools. I found the bench is good, the different clamping options are still good, but the whole thing is just too light. I would use a hand plane, the material is firmly clamped in the bench, but the whole damn bench would rock around and slide across the floor. I also found that the 30" height was too low for my bad back. I ended up getting a couple really heavy pressure treated 4x6s, bolted them side to side underneath the bench legs, and then building a cabinet with drawers to hold tools that fits in the open area under the bench. Between the large beams, the cabinet, the heavy tools in said cabinet, and the diagonal stretcher I added to kill the side to side movement, it is now super solid. Plus the whole thing was lifted by 5 or 6 inches when all is said and done.

@joelskolnick5470 3 жыл бұрын

My present bench has limitations for long boards as you've noted in this video. I've had to use long pipe clamps to accommodate those long boards which is cumbersome. I agree with your comment about building bench for long boards. I'll integrate that in my next bench. My bench top is made of two sheets of 3/4" plywood making for 11/2" thickness. I like the idea of adding a masonite top.

@aroundhomediy 3 жыл бұрын

Great video Rex! I can definitely recommend a Roubo-style bench and am very happy with the laminated mortises and tenons on the one I made a while back. Mine ended up being 6.5' x 22.5" deep and 3.25" thick which is pretty close to your recommendation, and with a leg vise and end vise it's done everything that I need it to so far. Can't wait to see what you come up with!

@wernerviehhauser94 3 жыл бұрын

"Boring and works" beats "innovative and doesn't work" every time :-)

@stopabusingstatistics6291 3 жыл бұрын

When you have the time and patience, the latter is still a great learning experience though!

@vittocrazi 3 жыл бұрын

you dont know if it works until you try it, though

@wernerviehhauser94 3 жыл бұрын

@@vittocrazi true. But then its "innovative and works". I agree with Rex' point - innovate on your product rather than your tool. If your goal is to innovate on tools - go ahead. But if your goal is a good product, use the tried and proven tool if possible.

@Comicsluvr 3 жыл бұрын

Saw the title...clicked. I'll be building a new workshop next year and so I'm doing HEAVY research into my bench, storage, etc.

@Taskarnin 3 жыл бұрын

Great video! Glad to see content like this coming out of Ohio. NE Ohio here. I do more metal working, but I happened to have 7 or 8 very large machine pallets (think sized for semi truck) laying around. I didn’t have the tools to make a good wood workbench. I made a top out of the 4x4s by cutting to length, having a friend help with their jointer by squaring up the boards and then planing to thickness. I then made a lap joint for the legs to the table top. The trick is that I made the lap joint between two laminated boards turning it into a mortise and tendon. Boards were glued together. Then I drilled holes all the way through the stack through those joints and clamped with all thread. Finally pallet wood is pine and not very tough. Had my local steel supplier shear a quarter inch plate which went on top. Pretty happy with it, the setup will allow me to add vices/tool hangers with ease later. I primarily use it as a beating table. Added angle to the edges so I can bend sheet over it. Every craftsman needs a different bench based on what they do. Well worth doing the research and building it right the first time!

@jenniferbarnes5312 11 ай бұрын

I don’t mind admitting that my workbench design has been living in my head for a while but I am happy you shared these tips! Because I’m pretty much on the right track. I wanted the legs in at the ends just for looks … 🙂 glad to hear an end vice may work well there in the future Mortise and tenon is freaking me out tho, but I’ll jump in and see how it goes Cheers Thanks again

@emmmmmmmmmmmmmm511 3 жыл бұрын

I really like the portable design of the Moravian benches.

@johnc6339 3 жыл бұрын

Me too and I'm in the middle of building mine. I hope it's as good as I have been told.👍🔨

@pimpmyrustbucket 3 жыл бұрын

Me too, that's why I built one! 👍

@BradsWorkbench 3 жыл бұрын

Love the half lap! Easily cut with a cheap circular saw too 👍

@JustinShaedo 3 жыл бұрын

I make small ones with my router; surprised at how well that worked

@noelnicholls1894 3 жыл бұрын

Now I realize using titebond and screws might have a downside, never considered bolting it.

@SgtJoeSmith 3 жыл бұрын

Brad!

@MRichK 3 жыл бұрын

Yes I did that and it was very satisfying - a few back and forths and pop the little "cards" left out and smooth the bottom. I was happy I was wearing ear protection though.

@waynedavis3956 2 жыл бұрын

G'Day and thanks Rex, I'm in the process of planning the layout of a workshop section in my new shed - garage - man cave, your advice will make me re-jig my plans and hopefully end up with a more efficient workshop area. Now I'll have to binge on your videos. Cheers Mate.

@Ukepa Жыл бұрын

really good advice... I'm starting woodworking in retirement and I appreciate seeing how to use hand tools. I a little afraid of power tools and don't have a big budget either. Thanks a lot!

@donmahan2374 3 жыл бұрын

Rex, I made a work bench 35 years ago using half lap joinery. It has stood the test of time including 5 major moves. One of the key features I used was a ladder like superstructure to support the 2.25 inch plywood top. I glued hardboard to the top and replace it every 10 years or so and banded the edges with poplar. Great video.

@keithswanson2102 3 жыл бұрын

I guess I was lucky cause I found your channel and built your English Joiner's Bench as my first project, your plans were simple, easy to follow & well explained video

@c.a.g.1977 2 жыл бұрын

I made the Paul Sellers Plywood workbench as my first workbench. A pretty decent bench, actually very doable for a novice woodworker. With the skills I've developed over the years I might make the same bench, but then with some nice hardwoods. Great video, Rex, with good tips!

@1988dgs Жыл бұрын

I was considering Paul’s plywood bench but went with Rex’s quick stack bench, started it this weekend

@c.a.g.1977 Жыл бұрын

@@1988dgs With today's lumber prices I'd probably go for the cheaper option 😄. Both are fine benches, in my opinion. Good luck with the build ans I hope the bench will serve you well!

@1988dgs Жыл бұрын

@@c.a.g.1977 thanks, I saw Paul’s bench in a recent video and his looked a little beat up, I couldn’t have got the Baltic birch ply he used so it would have aged quicker, and there are lots of ply repairs in what I would have been using so wouldn’t have looked as nice

@c.a.g.1977 Жыл бұрын

@@1988dgs yes, the blatic birch would look the best. I slightly deviated from his plans by not using laminated strips for the top, but just wider boards cut and stacked horizontally ( instead of small strips vertically). Put a few coats of clear poly on it, seems to be holding up fine. Whatever you choose: making your own work bench and then using it: awesome!

@RenameUranus2Caelus Жыл бұрын

How do I like this video more than once? I'm so glad that I found this before I started building my* first bench. I'm confident that I would have made at least one of these mistakes, and I look forward to reviewing Rex's plans.

@JN-hp1cc 3 жыл бұрын

Lighting and film production is looking great Rex!

@chagildoi 3 жыл бұрын

Agreed, it looks go good now!

@Jacksparrow4986 3 жыл бұрын

You need to work on your haircut though. You start to look like barber shops have been closed for too long ;)

@nickmagma7745 3 жыл бұрын

Thanks for the measurements in metric. Supporting you on patreon is really worth it. Love your content.

@matts.8342 3 жыл бұрын

Oh yeah, I agree. Just the forum alone is worth the $2! I was skeptic as I wasn't sure it would actually be an active community but I am also from NEO and wanted to help someone local to me out a bit, but the people there have been very friendly and active!

@robertflournoy2308 2 жыл бұрын

Fantastic video. I’m currently gathering ideas to design my third workbench and haven’t seen as many well thought out ideas before.

@mannihh5274 2 жыл бұрын

Great recommendations about this topic - wish, I had known 40 years ago. To make bench-dogs and hold-fasts work with your soft table-top, double it up with a nice hardwood top, attached with carpet-tape and 4 or six wooden dowels (3/4"). You can plane it several times, and when iit gets too thin, remove it and put on a fresh one. Switching from your bolt-and-nut joinery to a half-lap shouldn't be a problem either. Keep up your great work and stay safe

@TheLunchbox99 3 жыл бұрын

"I want the Pangea of Workbenches" needs to be on a t-shirt! LOL

@davegiddings6052 3 жыл бұрын

Agreed!

@rw7532 2 жыл бұрын

No doubt..lol. I have gotten into the habit of just scrolling past any woodworking video that has the word “ultimate” in its title. There are few you tubers who have been woodworking for about three-four years and have the audacity to apply that title to their most recent creation.

@fernosan 3 жыл бұрын

My bench was my first project. It was literally a door made of composite wood, partially hollow. Never been so proud to build something out of wood since.

@0ddSavant 3 жыл бұрын

Same here. It was a resounding C effort on my part. I’ve since retrofitted it up to a solid B-. I’ve done better work, but that was special.

@mdbbox5660 3 жыл бұрын

Solid core doors make great benchtops. They're pretty solid, heavy, dead flat, relatively cheap, and good sized. I nail a sheet of masonite to the top and trim the edges flush with a router. It's cheap and easy to replace when it gets worn out.

@robbie6625 3 жыл бұрын

@@mdbbox5660 I agree, Habitat 4 Humanity ReStore is a great place to get solid-wood doors at a cheaper price than you could even get whitewood from the big-box

@wadestanton 3 жыл бұрын

I buy the returned interior door for $5 ant use it as benchtop when I want to do a lot of cutting on the top.

@caseyspeaks6380 3 жыл бұрын

same here - it was greeat -until I missed a hammer strike and added unwanted dogholes. lol. Depends entirely on what the bench will be used for....

@Javonis 3 жыл бұрын

First video of yours that I have seen. Immediately hit the like button, subscribed and clicked the bell. Information was clear, experiences shared with context and even shares the importance of thinking ahead with examples of what awaits if you don't. When you changed locations to highlight elements of the bench you took the time to get your lighting setup properly so that we could see those details. As you discussed each joint you had physical examples and rotated them to the cameras perspective as you demonstrated the different vectors of force applied and how they deflect. You take pride in the quality of your work and the little details like that in the layout of your videos makes a huge difference when trying to learn. Great work!

@MMMS75 5 ай бұрын

Happy you often talk about pragmatic approaches to woodworking. I’m in that same „transitioning out of power tools” phase and want to build a real bench for handtools too. I have an annoying space in a Chicago basement and want to be able to disassemble the bench, bit somewhere you get lost overthinking long term, pragmatic approaches, and everything else. Can’t wait to start this after finishing my kids bunk beds.

@DarkAvenger1234 3 жыл бұрын

Paul sellers made a comment, I can’t remember in which video. I actually think it was his blog, one in which she was dispelling myths. In which he said that people had listed benches height as ideal being at the break in the wrist. And he said that is too low and you’re gonna end up with back problems. He recommended a bunch even taller than where your wrist breaks.

@mccormackclass 3 жыл бұрын

He also has a great trick for figuring out the height. He says to make it higher than you need, then work on it for a while standing on platforms of different heights. Once you have a platform that feels good, take away the platform and cut that amount off the legs of the bench.

@silmarils94 3 жыл бұрын

@@mccormackclass I did the " Paul Seller's workbench ", works really great BUT it's very tall and I'm thinking in do it again. Paul Seller's only uses it for joinery and rarely prepares wood buy hand, he's working with 4S boards mostly.If you are dimensioning wood buy hand you need another concept of a bench to hold the work efficiently ....and you need a lower bench.

@2adamast 3 жыл бұрын

I agree, low benches were likely for hand sawing (the height of a saw), I would expect working between the wrist and the elbow

@silmarils94 3 жыл бұрын

@@2adamast and hand planing

@2adamast 3 жыл бұрын

@@silmarils94 The elbow is mostly nearly in line with the plane (even in Japan), so high is also ok. Where for saw, axe and chisel work the hand can reach quite high.

@howardhiser8078 3 жыл бұрын

@Rex Krueger If you are willing, I would love a video going over the pros and cons of the European Continental, the Roubo, the Nicholson, and the English Joiners workbenches. I think that would help beginners in deciding what style will fit their needs/projects the best.

@johnbesharian9965 2 жыл бұрын

Don't forget the "American" style with a metal face vice on the front at one end and either a tail vice on the front at the other end or a single or double screw face vice on the end opposite where the front face vice is mounted.

@postandghost9391 2 жыл бұрын

Im really tight on space and I wanted to design a workbench with a balance of storage and workbench features. After watching this, I think its best if I just dedicate a single cabinet to do the majority of storage first, then a workbench with all the features I immediately want with room for expansion and minor storage. Been holding off for months now on making my workbench but I feel it coming soon.

@JoeSchliewe 3 жыл бұрын

Great vid. I’m a first time garage owner with very little tools... going to build a 2x4 basics workbench to get me started. Wish I would have seen this sooner! Thanks Rex.

@allenjpl 3 жыл бұрын

"If you're watching this video, it's likely that you're mostly a power tool woodworker, just looking in to getting your first real bench." I don't think I've ever been called out by a KZfaqr as accurately as this.

@BeauChampion 3 жыл бұрын

I thought he was talking about me! 😀

@assassinlexx1993 3 жыл бұрын

Skip the wood a steel bench is truly the best. You do all your projects. Drill holes for all the places . Zero worries of warping. If have to bolt a sheet of plywood reversible with a sheet of counter top.

@robbie6625 3 жыл бұрын

@@assassinlexx1993 The problem with a metal benchtop is it can damage your work, damage your tools, and tends to be slippery for most woodworking activities. If you have planes, you can set them on a wooden bench with little fear of damaging the blade, not so on a metal surface. For any of my metal-work, I would choose a metal workbench 10/10 times, but for woodworking, not so much. I saw this bench at my local Grizzly store (Yeah, I'm one of those very luck people who lives within easy driving distance to one of the 2 actual stores) and I thought it would be a phenomenal addition to my shop, if I could ever justify it to my SO:www.grizzly.com/products/grizzly-78-x-39-3d-steel-welding-table/t28981

@assassinlexx1993 3 жыл бұрын

@@robbie6625 for those rare times i am working with dead tree carcasses. Got sheet of plywood to put on the steel deck. The other side is cheap laminate. A couple of clamps. That way I don't damage those tender wood planes and chisels. Fun no one bolts their bench to the floor 🤔

@robbie6625 3 жыл бұрын

@@assassinlexx1993 that makes sense. If your primary medium is metal, then it makes sense for you not to have a fully featured woodworking bench. That being said, I could just as easily say that you could build a woodworking bench and then put a metal surface on top of that. Honestly, this discussion now has me thinking about the possibility of making a reversible benchtop that just had a permanently attached metal work surface. You're really triggering my engineering inclinations LOL

@Joey-bq4hu 3 жыл бұрын

Hello from Texas... I hear you loud and clear ;)

@shaynesabala 2 жыл бұрын

Brother you have a new fan. You gave me so much information I’ll need to rewatch this. You would not believe me if I told you what I’m working on. I am (today) making a top just to throw over a portable table so I’ll have a flat surface to work with. My though was to add to it as I learn what is important to me. You gave me so many ideas, thank you.

@monicaolaru5228 4 ай бұрын

Ok this is terrific. I’ve been completing my imperfect projects on the ground and on a bad farmhouse table I also built on the ground, but no more. Thank you!

@borjesvensson8661 3 жыл бұрын

Regarding inovating. The golden rule is copy first and inovate afterwards.

@Steve_1401 3 жыл бұрын

My engineering mentor used to say 'Any idiot can come up with version 2, it takes brains to come up with version 1" :D

@passwordpassword2199 3 жыл бұрын

truer words have never been spoken

@etpelle72 3 жыл бұрын

I thought the golden rule is “he who has the gold makes the rules”

@johnbesharian9965 3 жыл бұрын

@@etpelle72, The secret is to figure out how to get the gold.

@blimlimlimm 3 жыл бұрын

As they say "learn the rules before you break them."

@mobaumeister2732 3 жыл бұрын

With the half lap joint it’s better to offset the two bolts so that they aren’t in line, this way you avoid wood splitting and also have greater strength.

@dthellard 2 жыл бұрын

Thank you so much for this video. I ran out to the garage, got my notes on the design and measurements, and make a lot of edits!

@rabbitovsteele6167 2 жыл бұрын

Hi Rex, I always enjoy your videos and learn a lot. I built a workbench in February. Wish I would have seen this video first. I did a lot wrong, or possibly "different," but it works and I've finished a lot of projects on it. My budget for the build was,... actually, I didn't have a budget. I went to local factories and home centers and asked, "you throwing that out?" I used cast off wood and materials on hand. 72" x 17" and 34" high. Weighs a few hundred pounds. Still am doing tweaks to it, but the big thing for me is that it has helped me blast through a bunch of projects that there was just no good way to do without a bench. I need a vice though. I admired your leg vice in the corners of the screen. Just a few more projects to finish and I might give that a try.

@cronkthecrunk 2 жыл бұрын

I clicked into this thinking I probably did it all wrong and found out I aced the test 😂 I prefer metal fabrication so working with something that's always flipping moving is frustrating but somewhere along the line I became fascinated with Japanese joints.

@danielelliott3659 5 ай бұрын

Hard to beat 7018..

@cronkthecrunk 5 ай бұрын

@@danielelliott3659last time I ran 7018 it kicked my butt. Been on ER70S-6 and ER4043 too long

@myphone7568 3 жыл бұрын

I've been woodworking for 20 years (still terrible at it, btw...much better at metal working) and I am extremely appreciative of your approach to woodworking education here. Thank you for this!

@ChrisStCyr-gnt7 10 ай бұрын

😂 30+ years and still am not very good either!

@aradenatorixveckhomaveclus2276 2 жыл бұрын

I'm just starting out in woodworking and I know I need a workbench, but at the moment I'm looking for something more portable and small. However, I liked your video with the one I just gave and I liked the tips you give and the observations, and although I want to equip myself and use power tools in the not too distant future, for the moment everything is manual, I love it, it has its difficulty but also its charm. And I just discovered the versatility of the holdfasts and I think that for the moment they are a practical option for clamping for what I have in mind. Greetings to Ohio and thank you for this video.

@perryconnell5809 2 жыл бұрын

Thanks for this. I did a bunch of research before building my bench which I just completed with my kids. …and then I saw this one!!! Lol. You explain things very well. Love it. I probably would have done a few things differently. …but you’ve also explained a few things that I can still integrate. Thank you again for sharing.

@K9Megahertz 3 жыл бұрын

Haha, I'm still at the nine 2x4's glued together and supported on two home depot buckets phase, but it works for now given the limited space I have available.

@pawpawstew 2 жыл бұрын

Outstanding points, Rex. Thanks for taking the time to share your tips. Things like this definitely help us solidify the features we need in a useful bench.

@Proximax9 6 ай бұрын

I just bought a small farm and in the barn there is a perfect place for a wood working space. I have been wondering where to get started, but after seeing this video I definately wanna start my woodworking hobby by making a work bench. Great video, I'm sure I will make a lot of mistakes but at least now I know to avoid a couple of them :D

@BobMuir100 Жыл бұрын

Brilliant Rex truly brilliant! It can take a long time to stop fighting the old , traditional, way against the new and wonderful. I can’t begin to tell you how much time effort and money has been wasted on the new! Love your openness. Bob England

@39MercFlathead 3 жыл бұрын

Great suggestions for most of us. My father built our house, barns and all our furniture by himself starting in 1945. He built his workbench with masonry walls for legs and a railroad tie table topped with a piece of 3 inch thick laminated maple flooring from an old bowling alley. It was 16 feet long, 18 inches deep and very stable. He never moved it either.

@johnbesharian9965 2 жыл бұрын

Having spent my 12th summer helping my father terrace in three tiers the 50+ foot wide, 45 degree, 45 foot high embankment behind our home on the Providence River with Rail Road Ties, I understand exactly why he never moved it.

@marcusmarcus8616 2 жыл бұрын

When I was a pup, my grandfather built his back porch out of railroad ties that were left over from when they replaced ties on the tracks in front of his house. This railroad ran through town at the time. He built it in the late 70's and as few as 5 years ago, that was the last time I laid eyes on it, that porch is still standing.

@johnelwer3633 3 жыл бұрын

A lot of beginners want a big top. When we actually start working, we realize we only use about 16 square inches. My top is 18" wide and 6' long and it is plenty.

@JOJO-se5cm 3 жыл бұрын

and not everyone has a big shop ;)

@cheesesniper473 2 жыл бұрын

My workbench is 8 foot long by 3.5 feet wide. Most of the powertool work and storage is done on that. My "squaring table" is a solid 2x4 top about 3 foot by 3 foot. This is my setup, but works well with the mixture of handtools and power tools i use. Also the squaring table fits underneath my workbench so it condenses nicely when i dont need to use it. The workbench is higher for stain, varnish, and miter saw work, the squaring table is shorter for hand tools and is the perfect size for construction and hand tool work. You really just gotta copy the masters, then improvise for your own needs. This somehow all fits in my little shed too lol. I might build a real classical workbench, but its gonna be a minute till i have room for it. Also i suggest using a plywood top and put about 7 coats of spar on it. When it gets bad you can either sand it back down, or sand and recoat. Keeps weight down, and looks nice.

@MaryAnnNytowl Жыл бұрын

An excellent list of things to look at, anticipate, and plan for, before you ever build that bench. Thanks!

@bluemagoo3116 2 жыл бұрын

Very detailed video, I would also recommend a light on an articulated arm, for extra vision of details. like an old school drafting table light.

@peterchase2425 Жыл бұрын

Rex, just discovered your channel and I wanted to thank you for your thoughtful and thorough approach to the whole art of woodworking. I'm an utter novice with some aspirations to learn more but I'm saddled with a ridiculously small amount of workspace. Can you or anyone recommend an approach to build FOLDABLE legs on a decent no frills workbench? Any advice highly appreciated.

@bwood6337 Жыл бұрын

I *think* the most recent video might be made with this in mind.

@ethanshaw9789 3 жыл бұрын

Id love to have seen a mention of the moravian workbench. To me its perfect.

@krungstar4541 3 жыл бұрын

Rex, thanks for your videos. Just started , but i managed to set up a Stanley No4 today. Busy working on the floor and a step at the moment, wood working for humans is king!!

@scottszoke9958 2 жыл бұрын

I just watched this video today, Aug 7,2021. I have watched many of your videos and learned from all of them! I like your honesty the way you “call it as you see it”. Example: when type say, “but you probably won’t”…regarding redesigning an existing part of a bench we made. Yep, I do it often. Fortunately,I did anticipate ‘future ideas’ when building my first work bench. M&T joinery, added bench dogs, beefed up my vise, etc. But I still got knew ideas from this video and WILL make those modifications….sometime🤣! I heard a good quote recently that I think you can grasp…”I’ve done a lot of stupid things in order to prove how smart I am”. Thanks for your knowledge. Scott

@pashaveres4629 Жыл бұрын

Speaking as a theoretician, Rex, I really appreciate this video. Good theory learning supports EVERYTHING else. Sometimes "Okay, make this piece 3 1/2 inches and that one 1 1/2 inches..." is the right approach - but it leaves no room for anything else. Theory, with the voice of EXPERIENCE, teaches the timeless (maybe even, uh, traditional) principles that help you make decisions when you get stuck. First vid, have subbed. Thank you. Aloha

@youcanthandlethetruth6976 3 жыл бұрын

Yo Rex, can you make these lumber prices come down so I can build this stuff again? hahaha

@1pcfred 3 жыл бұрын

I was getting my raised bed garden ready this year and saw I needed a new board on one side. So I went on the big box store website to see what a new piece of wood would cost. I ended up patching the rotten bit with some scrap 2x4 I had lying around. One 2"x6"x8' piece of wood is almost $11!

@youcanthandlethetruth6976 3 жыл бұрын

@@1pcfred I know bud it's outrageous. I was buying 2x4 for a couple bucks and it's like 9 bucks now. The plywood is off the scales expensive right now. I'm seriously thinking of just buying one of those home milling machines now and cutting the timber on my land. The cheap money the central bank is giving out at 0% interest is dangerous, because tight markets like Lumber can be easily manipulated and I just don't trust the financial sharks. We'll see what the rest of the year holds, hopefully things start getting better.

@ohgary 3 жыл бұрын

You ain’t seen nothing yet...

@youcanthandlethetruth6976 3 жыл бұрын

@@ohgary Oh Lord, don't remind me, I don't even wanna think about what's coming next.

@1pcfred 3 жыл бұрын

@@youcanthandlethetruth6976 there's just so many factors steering the market right now. So we're in a perfect price storm for lumber. Hopefully it will come down someday. But it won't be soon. Figure on years before we recover.

@valvenator 3 жыл бұрын

I used a cheap solid core 32" door for the top and half lap joints for the legs. The thing is solid as a rock. I was quite proud as it was my first major project. But I stopped patting myself on the back when I realized, yep, I made a huge mistake. I made it too damn big. Since the only place I have for it is against a wall a 24" door would have been perfect. I tried to hang my tools on the wall behind it but reaching over to grab a tool is impossible especially with my short frame. Live and learn. I need to tear it apart and cut it down.....yeah, maybe someday.

@nnntc 11 ай бұрын

I missed such a program on YT, I start with wood and you are like a book for me. Greetings from Poland!

@GazBadger Жыл бұрын

I wish I had seen this before building my first or even second (re-engineered) benches. I will soon be embarking on a new bench build and will definitely be incorporating a lot of these ideas. What I would like to see (if you're still looking for ideas), is more information on work holding and how to incorporate them into my bench. Full disclosure, I haven't yet searched your library to see if you have already covered this so if you have then my apologies. I may even vlog my build... If I do I would love your feedback if I post to YT.

@ReverendTed 3 жыл бұрын

18:36 - I _wondered_ what that was, down here in Texas.

@ernestgalvan9037 3 жыл бұрын

Yeah!! Me too, woke me up from a nice nap, ye dern Yankee!! Complaint from down the Rio Grande, near Old Mexico. 🐴

@ohgary 3 жыл бұрын

Probably thought it was a Democrat reacting to Cruz’s re-election.

@antoniolopes8776 2 жыл бұрын

I also heard something here in Portugal, Europe.

@donaldorr8508 2 жыл бұрын

I am getting ready to build my first work bench, thanks for the advice.

@a_mustache_of_great_repute 3 ай бұрын

I made my first bench out of a hollow core door some 4×4s nails screws and joined lanks for a shelf. Worked great for a long time but eventually became my paint/stain table.glad I can still use it

@patregan 3 жыл бұрын

I can confirm. We most definitely heard you here in Texas Rex!

@Tonyhouse1168 3 жыл бұрын

\m/

@Mikey__R 3 жыл бұрын

Rewatching this video again. I often see people talking about their composite tops staying flat, but I can definitely imagine them sagging between the supports, especially if they get damp. And unless the supports are also made from an engineered product, they're also susceptible to warping, which will pull your top out of true. I think designing your bench top such that it can be planed true is the only way to be sure of its flatness.

@Bustermachine Жыл бұрын

On the other hand, I think a lot of people put way too much stock in extreme flatness in their woodworking benches, and extreme precision in their wood working in general. Woodworking is not machining. The same level of precision is neither needed nor even desirable.

@Mikey__R Жыл бұрын

@@Bustermachine it depends on the work you do. I built my first guitar on a Black and Decker Workmate, and it was totally not easy. I imagine if you're trying to cut accurate joinery at either end of a 6ft board, then having both ends of the bench coplanar might help this. I don't know, I don't make big stuff.

@johnossendorf9979 2 жыл бұрын

I built my first work bench when I was 8 years old out of scraps from the boarder and batten siding Dad was putting on a building on our property. It was mostly nailed together with nails I picked up off the ground and straightened on Dad's anvil. It was rickety and didn't last, but I remember building a few other scrap projects on it that summer before I chopped it up for kindling.

@stevebates2393 Жыл бұрын

What a fantastic Video!! Rex you are a mind reader, as everything you mentioned about building a bench and the reasons for doing so is me down to a tee. I like my power tools and I had the vision of a huge bench to hold everything, as well as dump some of my day to day stuff on, and whilst I may well still do some of that, not as much now as I can see ahead in where I need to be with my bench. BRILLIANT!! I have now subscribed and look forward to playing catch up with some of your other videos

@billgilbert6841 3 жыл бұрын

Have you tried the Moravian bench? Sturdy, relatively simple and takeapartable (yes, it's a word!) with no mechanical fasteners. I built one and I like it a lot.

@arrayofemotions 3 жыл бұрын

How hard was it to build? I'm a total beginner and after looking at a lot of benches, the Moravian workbench appeals to me the most. But it does seem rather complex to build.

@billgilbert6841 3 жыл бұрын

@@arrayofemotions Yeah, if you're a total beginner, it might be a bit much. But for your second bench - definitely!

@johnbesharian9965 2 жыл бұрын

@@arrayofemotions, Thank you for for proving Clint Eastwood's point: "A man's got to know his limitations" as "Dirty Harry" Callahan in the movie of the same name. Only small people with oversized egos can never admit they don't know or can't do everything.

@jblewis1975 3 жыл бұрын

Man, anyone thinking about building a workbench should watch this video first! I've made all of those mistakes, lol 🤣

@johnnygeejr500 3 жыл бұрын

KEEP YOUR WORKBENCH CLEAN .................FROM ONE WHO KNOWS !

@teetuccillo4259 Жыл бұрын

Thank you, Thank you, Thank you for making this video! I have been building and having such issues with not having the proper setup, e.g., no vice, no support at the end for holding the wood up or considering the layout. I have been trying to figure the garage out as it is 12’ wide with 2.5 feet on both sides dedicated to storage, and one of those sides has a countertop with cabinets underneath, which has been the main area of my work. You gave me so much to think about for now & the future, especially before diving in and buying something too big or building some fold-a-way bench. I'm excited to sketch it while figuring out how to work the storage. At least it's a start. Did I say thank you!!