AEG Upgrade Springs | Fox Airsoft

Рет қаралды 65,306

Күн бұрын

Modifying or disassembling your airsoft gun voids your warranty from us. Consult professional help when performing upgrades or do so at your own risk.
FPS is a limit not as goal!
If you can't verify the results with a chrono, undershoot your target FPS with a spring rating lower. Better to be under than over if you're not able to do the work to change the spring yourself. Your local tech should be able to suggest the best spring based on their experience with the brands and batches of springs they have. Some batches clock in higher than advertised and that is very much a thing. We like ASG and Modify for high quality springs, though the CNC Products ones we carry are a bargain and do the job too.
TL;DR what spring do you need:
For most CQB fields, 1J or 350fps measured with a .20g BB = M100 spring or less
For most outdoor fields, 1.5J or 400fps with a .20g BB or 340fps with .28g or less than 320fps with .32g
Downgrading reduces stress and wear and tear. Upgrading increases wear and tear. Upgrading a gun to shoot harder than stock may require an upgraded battery and/or motor.
Product Link:
Shop Upgrade Springs: www.foxairsoft.com/internal-p...
Airsoft Gun Giveaway: www.foxairsoft.com/airsoft-gu...
Like Fox?
Subscribe: kzfaq.info_c...
Facebook: / foxairsoft
Twitter: / foxairsoft
Instagram: / foxairsoft
We would also love to have you come and visit our walk-in shop in Parker, Colorado.
Fox Airsoft
6260 Progress Lane
Parker CO 80134
(888) 316-7816
www.foxairsoft.com
FAF Airsoft
11321 Dransfeldt Road
Parker CO 80134
www.foxairsoft.com/flat-acres...

Пікірлер: 41

@wiskeywiskey0365 2 жыл бұрын

Thanks alot. I am beginner in airsoft and more videos like this would be awesome…truly appreciated

@gtf_5712 2 жыл бұрын

Thanks for the video tang. Very useful. When I was new I had no idea things like compression parts or bore diameter played a big role.

@benceforgacs1010 2 жыл бұрын

It helped a LOT and was straight on the fact. I like it. You got +1 subscriber.

@apollo9935 Жыл бұрын

Thanks! Great for anybody wishing for an easy upgrade to their AEG.

@ktmkeith13 2 жыл бұрын

Great video, you guys did a great job I appreciate the explanation ! Thank you

@josharnold7729 2 жыл бұрын

Cracking video... short sweet and simple.

@iamdom_720 2 жыл бұрын

I just brought my vfc Avalon with a gatetitan 2 out to my field and would have been classified as a dmr at 370 fps with .32s keep in mind it is an outdoor field so I gotta drop the fps a load if I want to be as aggressive as I wish to be with it.

@astrobob1705 Жыл бұрын

I love the faf range

@DOConnell333 10 ай бұрын

This may be a stupid question but here goes.. i bought an upgrade spring for my Specna Arms Core AEG, i got a Prometheus Non Linear Spring - MS110. I have fitted a gate warfet mosfet and have an 11.1v lipo. The gears are reinforced and the piston has a metal teeth so im thinking the gearbox battery and mosfet are all able for it. The problem is it arrived today and when i went to fit it i notice its about 50% longer than the stock spring that came in the gun which i think was M90. Its also obviously consoderably stiffer. Did i get sent a sniper spring as opposed to a spring suitable for an AEG with a version 2 gearbox or is it normal for the upgraged springs to be so much longer when uncompressed?

@eduardochinchilla2198 Жыл бұрын

Goodness gracious! If I would have watched this video when I started playing airsoft I would have been immediately discouraged. Is almost like they want to discourage you by giving you every single variable that could happen and then telling you that it's still a guessing game. There is other really good videos on Springs and FPS but this one is not one

@RyanAl_36 11 ай бұрын

Hello, can i use guarder sp130 spring for for 40,000rpm motor with 1,450mah 11.1vbattery?. What is your good advise?

@dnr2608 2 жыл бұрын

Can i use 120 spring with 25,000rpm motor ?

@darkxxdude6727 Жыл бұрын

Did a chrono test at an indoor field with some friends just for fun not knowing it was required and got red tagged after seeing that my gun was shooting 386fps when the limit was 350:(.

@qipped1393 Жыл бұрын

Get a m100 spring

@Filiplego1 Жыл бұрын

Hey I have a serious question about this, if I get a CQB gun, and I want to upgrade it to more fps; is the spring everything I need? Do I need to uprage other parts in the gearbox or something else to make it work?

@gusratterman1773 Жыл бұрын

Said you might need to upgrade the motor or batteries

@peter11256 2 жыл бұрын

Very informative. For non-linear springs, the small part that is more tightly compressed coil part (and easier to push) is the one that should go in the spring guide ?

@c0mputer 2 жыл бұрын

My vfc BCM mcmr has tighter wound spring portion touching the piston. I would have thought it would be as you said? In the spring guide. My thought is that there is more mass per mm in the tighter wound portion so you wouldn’t want that part to be moving faster. It would take more energy to get the spring moving albeit very slight probably. So you’d want that at the spring guide where it’s not moving that much and the lighter side of the spring is doing the work. But it looks like I’m wrong.

@peter11256 2 жыл бұрын

@@c0mputer yeah makes sense. Maybe they set up your spring in the wrong direction at assembly. I downgraded my spring as my AEG came in shooting hot, and I placed the compressed part in the spring guide, it's working flawlessly. Also, the spring it came with was set the same way.

@c0mputer 2 жыл бұрын

@@peter11256 Good to know, after talking with an airsoft mechanic friend he said also that the tightly wound portion goes on the spring guide like you have done. I also need to downgrade for a hot shooting gun and will do the same as you.

@muhammadnanazrin3289 2 жыл бұрын

Its ok m145 spring with m160 motor... And how much the fps i will get

@johnpositive2386 Жыл бұрын

So, how did it go?

@itsmemr_savage3097 2 жыл бұрын

I have a g 42

@majorblow01 2 жыл бұрын

Do you think an M130 spring is too much for a lancer tactical gen 2 with metal gears, 19K Motor and 9.6v battery?

@pspmaster510 2 жыл бұрын

Yes, the spring is too high for the gun. The gearbox and maybe the gears will be able to handle it, but the motor and battery aren't suitable for an m130.

@majorblow01 2 жыл бұрын

@@pspmaster510 So if I upgrade the battery to 11.1v, a better motor, and a mosfet it will be fine?

@FoxAirsoftStore 2 жыл бұрын

An M130 is going to be more work out of most gun's stock motor basic 9.6nimh (as mentioned by the other commenter). Especially when upgrading a less expensive base gun, the motors they have will be good enough for stock performance and that's it. Not to mention the integrity of the gearbox shell. You're going to be putting more wear and tear on the other components so starting with a better gearbox will ensure it will last a bit longer. My recommendation is that it's a lot of work to push it up with just a spring and you have to ask yourself if the extra 0.5J of energy is going to be worth $xx that you're gonna spend. That extra performance might be worthwhile to some, but the cost might be a factor too. One way I like to tackle it without adding more wear and tear is through air seal tuning as much as I can. That means squeezing more FPS out of the existing gun and keeping it at an M120 through better air seal components and a tight bore. Just a thought.

@majorblow01 2 жыл бұрын

@@FoxAirsoftStore thanks for the great response! This helps me a lot.

@robertdunn7717 2 жыл бұрын

@@majorblow01 check your gun specs i have a gen 2 but it is a proline so it has a etu with internal mosfetbut mine also came with a 24k motor and i belive the gear ratio is 18:1