@@crpyrce My pleasure. I appreciate your encouragement and support.. I try to think of all the different questions people have asked around the given subject.. Enjoy the Breeze...🍻

I spent quite awhile messing with my video feed. I literally have perfectly clean video now. Here's that video...🍻 kzfaq.info/get/bejne/hb5_oLyjyuCXonk.html

I appreciate your support and feedback. I'm glad your issues got remedied. Enjoy the Breeze...👍🏻🍻👊🏻

what is your problem? i am also facing some issues.Kindly reply me.

I appreciate your feedback! Honestly, the use of this video and a redundant ground is needed even more as parts seemingly get cheaper and smaller. Enjoy the Breeze...👍🏻🍻👊🏻

This improved lots, however, I took it quite a bit further, lol.. Link to the way I do it now below...👍🏻🍻👊🏻 kzfaq.info/get/bejne/hb5_oLyjyuCXonk.html

I just now seen this. No notification from KZfaq, as usual...🙄 I appreciate your feedback very much! I'm glad it worked for you too.. Enjoy the Breeze...👍🏻🍻👊🏻

@@propsoff you saw my other comment and replied. 😀

@@JoshDisher With KZfaq it seems hit or miss with comment notifications. It's frustrating but seems to be the nature of the beast..🍻

Thank you for checking out my channel and subscribing! I'm certainly glad this helped you out. The redundancy ground is needed to create a path of least resistance and filter out voltage irregularities in the video feed. Cost me nearly $10K to learn that... Lol

Awesome to hear it helped.. Welcome to the PropsOff family! Yeah, the last video, "Best Video Ever" has cleared me up to the point, going HD is not super enticing. I appreciate your feedback and support...👍🏻🍻👊🏻

@@propsoff no jk I’m so invested in analog at this point going the digital route at this time makes no sense , so my quest for figuring out how I can get the best 5.8ghz video feed possible for all my analog set ups began , then I found these two videos you had an boom 🤯 worked out really well to the point like you say going digital isn’t that enticing at this point lol , thank you for taking the time to post them, really helped me out big time 🤙

hello,what is your problem? i am now facing vtx singal problem.I even want to change new vtx. kindly reply me.

It helped big time on my 5inch racer. Tmotor F55A Pro II to MambaF7 and Swift 2. Had the OSD disappear and video darken a little. Grounded all and perfect.. Thanks for checking out my channel and subscribing...👍🏻🍻👊🏻

Welcome.. I appreciate your time and feedback...👍🏻🍻👊🏻

I appreciate your feedback and support.. Oddly enough, I haven't had to do this to either of my Matek flight controllers. I have wired all my others and have clean video, finally! Please, if you would be so kind and come back and tell me how things worked out - I appreciate your feedback...👍🏻🍻👊🏻

@@propsoff I have noticed a few things in my video I thing will go away. Ill reply with my findings!

Thank you for your feedback. It's a big deal to me to know other people can duplicate successfully what I've done. Awesome to hear. Enjoy the Breeze...👍🏻🍻👊🏻

Your very welcome...👍🏻🍻👊🏻

@@propsoff bro sometimes im having blackout after 2 to 3 mins of vtx running

@@mohitnaik604 What FC, VTX, Cam?

Lol, before loosing my hearing, I competed in stereo competitions in the 90s. Could bounce a quarter over a foot off the top of my car to some Snoop "Pump"... Haha, good times. Your right...👍🏻🍻👊🏻

Do tell of your outcome, never tried a whoop...👍🏻 I'll speak to my friend that has a pile of Tinyhawks...🍻

@@propsoff YES YES YES YES YES!!! 1000 X YES! I added a direct ground from the battery - to the camera - and it's FIXED!!! After a dozen hours of frustration, my issue was gone in 10 min! THANK YOU, SIR!!!

@@propsoff I'm going to make a quick video with pics tonight at work. I've been reading for days now and you are the only one (KZfaq & Reddit) that hit the nail on the head. Great job with the common sense explanation Most people seem to think it's a problem with VTX config in betaflight, incompatible antennas or no capacitor. Looking back it seems insanely obvious what was goin on and I'm kinda ashamed I didn't see it myself.

@@JoshDisher Heck Yeah! So happy you got it. I appreciate your enthusiasm and feedback...👍🏻🍻👊🏻

@@JoshDisher Lol, I took this even farther. My analog feed is comparable to HD720.. Check this video out...🍻 kzfaq.info/get/bejne/hb5_oLyjyuCXonk.html

Welcome...🍻

This is odd, not heard of this issue. Sounds like a posible short. Make a video of this issue and attach it here. I would be interested to see that. However, do check for things touching that aren't supposed to touch and run continuity checks..

The positive side is fine. The ground and positive act differently and the ground has RF/EMF canceling properties...🍻

I think adding the second one is the best. It allows the path to ground, come directly to the component in need. I played around more with this concept in another video and was surprised of the finicky behavior displayed by the FPV system. More grounding the better seemed to play out.

@@propsoff thank you very much!

🤔 First I would determine the type of camera - PAL or NTSC.. Then, I would go to Betaflight OSD tabe and reload it. Then, choose the camera (because auto sucks). If I got black screen with OSD, I would replace the camera. If I only got black screen (not snow) I would check my connections and worry the AIO is crappy...

The ground is the issue because electrons will take the path of least resistance. The ground being lame causes the flow to disrupt the video components and by giving it a solid ground, it allows the flow to be smooth. The biggest issue is the filtration on these boards are not great and the sign wave is of poor quality, thus, improvements to the ground helps clean that up. I've tried to give a couple explanations here, apologies if that makes little sense. It took a year of electronics classes in college to grasp the entire concept, lol.. I have a video that proceeds this one - I'll link it below... I spent about 9 months working things out and the video below is the final result. I wire everything this way, except 1S whoops - they need to be as lite as possible for racing and you get what you get...🤷🏻‍♂️🤣

kzfaq.info/get/bejne/hb5_oLyjyuCXonk.htmlsi=yXU-CGZ-etqefhXC

I appreciate your feedback...🍻

kzfaq.info/get/bejne/hb5_oLyjyuCXonk.html

The best way to start the troubleshooting process is to use a meter. Here's how... kzfaq.info/get/bejne/pMubebSczqrJdKs.html

I found it helpful, yes... I took it even farther here: kzfaq.info/get/bejne/hb5_oLyjyuCXonk.html

Are you using a separate VTX or is it built-in?

Are you using the "Auto Scan" feature of your goggles?

@@propsoff I’m not using auto scan I have the vtx channel on my osd and that’s the channel I use, it works for a few seconds and then I get full screen snow/static. It was working for a day before I started to have any issues.

@@pablomoreno1242 After the snow, it changes channels? What channel does it start for and go to? Do you have DVR you can share? This will be hard to figure out without some example...

@@propsoff yea can I email you a short video? Or how can I send you a video

@@pablomoreno1242 Easiest to do is upload an unlisted KZfaq video and copy the link, come back here and paste it..

I made this video just to answer that question. Not everyday I break a great working quad for a video, but I think the outcome was worth it. I hope you agree...🍻 kzfaq.info/get/bejne/g9t7dMmYvsy2mKs.html

@@propsoff thanks

All grounds are common - path of least resistance. We don't want voltage to build in the video component and a proper ground will open the flood gates (voltage/current in these systems are not in short supply) . Also, grounding properly, will kill RF interference. I have another video after this one, "Best FPV Video Ever", that dives deeper.. I have an Electronics Degree with well over 25 years of field repair. Learning electronics isn't a quick process, therefore, I'm happy to help...🍻

@@propsoff I appreciate you taking the time to respond, and I know little to nothing about electrical systems, with my small understanding about electricity it seems like you would also need to add another or larger positive power cable or the "flow" of electricity would still be hindered by the tiny positive esc wire....but maybe there is something I am just not getting. Anything you can say or direct me to to help me understand would be greatly appreciated.....

@dyeballer777 I'm not sure how to explain it in a KZfaq comment more than above. My understanding comes from a college degree with over 20 years of electronic repairs. I wonder if you look up, "things that remove EMF". I'm sure that will start your journey...🍻 Also, check out the final video I made. This is competition of months of testing and I was not able to get my analog video any better beyond this... kzfaq.info/get/bejne/hb5_oLyjyuCXonk.htmlsi=gLWcE6wMEsq1zfkQ

@@propsoff I understand electrical knowledge is hard won, I appreciate you taking the time to respond. Even though I don't fully understand how it helps, I took your advice and added another ground wire between my flight controller and my VTX and the difference is quite amazing, I don't understand how your channel is the only one talking about this....thx for your insight!

@@dyeballer777 I'm happy with it because my research has improved so many people's fpv experiences. However, it's somewhat frustrating to still be a very small channel that manufacturers ignore. I just refuse to tout only good things and can't afford to give stuff away.. What can ya do, I appreciate your support and feedback...👍🏻🍻👊🏻

@@RaininCatsnDogs Your settings in Betaflight OSD tab for PAL/NTSC/AUTO are incorrect compared to the camera itself, possibly.. Wrong channels is also a possibility, I assume you check that...🤔

@@propsoff thank for your suggestions

@@RaininCatsnDogs Let me know...🍻

Welcome to the PropsOff family...🎉 If your still having noise/osd issues, I took it even farther. This is the way...🍻 kzfaq.info/get/bejne/hb5_oLyjyuCXonk.htmlsi=bQx5fPTJcpP6zOlE

This method has basically made every quad I have, clear and crispy...👌🏻 kzfaq.info/get/bejne/hb5_oLyjyuCXonk.html

Would need to meter the VTX output per power assignment to determine if the VTX is bad. I had my MultiGP race director meter mine when it was acting strange. If it was pit mode, it should act the same and not favor a specific power output level. Did you try a new VTX?

I wish you and Chris was closer - totally want to rip it up there! I think it would help. I tried to stress the importance of a quality ground in DC applications. I appreciate any and all support...👍🏻🍻👊🏻

@@propsoff hopefully one day brother we can all make that happen😁

Yes, all electrons flow to the ground. We are just making the lipo ground the common and applying redundancy...🍻

After many months of free hobby time, this video (see below attached) is my final. I wire all my quads this way that have video noise.. Enjoy the Breeze...🍻 kzfaq.info/get/bejne/hb5_oLyjyuCXonk.htmlsi=Soegd_nXDnrShG1J

kzfaq.info/get/bejne/hb5_oLyjyuCXonk.html Something like this

Not really. The larger the trace, the better..

So can I just ground out all the available grounds on my FC straight to the battery ground lol

@@Chillin-fpv After a few months of testing, I put out a new video. This is the way I wire most of my quads... kzfaq.info/get/bejne/hb5_oLyjyuCXonk.html

👍🏻🍻👊🏻

After about a year of messing around with this, I did this video... kzfaq.info/get/bejne/hb5_oLyjyuCXonk.html

Thank you for checking out my channel and subscribing! I appreciate you! I have had lose or damaged wire harnesses from the flight controller to the vtx too. I replace the harness with a hand built one I make. I get the "SH to Picoblade" kit from Readymaderc..

www.readymaderc.com/products/details/rmrc-ultimate-sh-picoblade-cable-kit?gclid=CjwKCAjwqML6BRAHEiwAdquMnbH3dHewFAlb5xMZm6ysWITGebiPTFehLSUZHs3_MXujY3eK8T9UERoCKPgQAvD_BwE Here's the link of the kit to make your own harness.. If at all possible, I cut the harness away and direct solder it. However, some builds just don't allow that.. Hope this information is helpful...👍🏻🍻👊🏻

This video is to gain a ground directly to the flight controller. I have another video were my experiments took it farther and better..

@@propsoff I saw the video where you installed a power regulator nicely done... However I don't have one it's my speculation that it wouldn't hurt jumping one 9 volt pad to another however I'm inexperienced and a little short for cash I wanted to be sure before I tried I wanted your opinion if you thought I might try it or something I have a really good vtx, but I have it on vcc... I'm going to change it to 9 volt like I had it I just noticed my camera was on vcc last time I should have changed it over to nine volts instead of the VTX to vcc... I'm going to try jumping the ground like you did I just wanted to be sure about the 9-volt before I messed with a hot connection

@@coltonrooster If your VTX is rated for 2-6s then it is okay to power it from a 9-volt pad from the flight controller.. Normally, this would add some capacitance to it that may help (noise reduction).. Then, connecting your camera to the VTX (output pad) is acceptable. However, if your camera must be capable of receiving 9 volts from your VTX.. There are some cameras and there are some VTXs that can only handle 5 volts in, so, just be careful.. What you cannot do is to put two outputs together - it seems like you're far enough along and understand that. My preference, I usually like to use the output voltage pad and ground from the VTX for the camera because of better filtration, but a lot of companies are cheaping out and the VTXs on the market anymore seem like garbage.. So run the VTX from the 9v out pad on your flight controller. Also, run the camera from the VTX, if you want. Then, run a ground to the ground of the camera ground as a 3 way intersection. Should be good.. Note!!! I am not there to personally guide you and don't want bad things to happen, so read the manuals..🍻

@@propsoff Thank you so very much for tanking the time... I had wondered if the filtration would be better through the vtx thanks for clearing that up as well. Hopefully I can fix it properly now. It should be pointed out and is worth noting the obvious fix you've accomplished with a redundant ground. Soldering as a welder is relatively easy for me to understand but whenever you take too long or forget a cleaning step or shake a little too much it can be a pain...

@@coltonrooster You bet! Enjoy the Breeze...👍🏻🍻👊🏻

Sounds like your camera took a hit.. Change out your camera.. Only thing I can think (assuming all the starting stuff) is to see if there's a short. But yeah, camera swap..

@@propsoff ok but what about the osd? It’s affected by it too I think it’s my flight controller. But I’ll try swapping my camera system.

@@jaredallen8054 I had this exact same issues with a 5incher and it was the camera.. I took a hit and it started and progressively worsened. Lines during throttling and blinking osd.. I swapped the camera and is perfect again...

@@propsoff I’ve been flying today and it doesn’t do it nearly as bad or as much the past few flights it actually hasn’t done it at all I added another video wire from the fc to vtx but again it occasionally does it camera is next but I’m going. To keep flying until it’s unbearable

@@jaredallen8054 I went farther with the grounding and redundancy in this video, if your interested.. kzfaq.info/get/bejne/hb5_oLyjyuCXonk.html

What parts are you using? .VTX .Goggle Module .PAL or NTSC .Camera

Then you have something touching.

I've not heard of the TBS Crossfire rolling FPV feed. RCSchim did a video like a year ago about RXloss issues, but not familiar with rolling. What VTX? What Receiver in the goggles? Are they both manually set to the same channel (never use autoscan)?

@@propsoff furious fpv domv3 akkf3 Ill double check on the the channels

@@timmytson1 Make sure to manually set the VTX and then your goggles to the same. I always manually set them, the first time, then check smart audio afterwards.

I had some flannel shirt effect in my feed and it was bothering me. I wanted perfectly clean video - it took a while of testing and playing (about a year).. Here's the outcome.... kzfaq.info/get/bejne/hb5_oLyjyuCXonk.html

@@propsoff turned out to be a board fault. A 9v pad was barely shorting to ground. Video eventually dropped out completely ha, whoops. Had an old foxeer f722 v2 i swapped in with the same configuration and it came out crystal clear. Like almost digital clear.

@@glitchy8429 It's good to hear its awesome...👍🏻🍻👊🏻

What vtx are you using?

No comment is too late.. Question, did you run a jumper ground from your lipo ground to the camera ground? What size quad, what is it? What voltage, 2s, 3s, 4s..etc..?

I took it even farther.. Some would say it's excesive, however, my video is near perfect now. No matter how much throttle. kzfaq.info/get/bejne/hb5_oLyjyuCXonk.html

Hi man, am having the same issue I'm glad I stumbled upon your video it must have been 3x since your video saved me from going crazy about my issues with my whoop. I'll give this a try, im working on a 2.5 inch 2s toothpick atm m.facebook.com/groups/353056891728440?view=permalink&id=1250302255337228&source=48

👍🏻🍻👊🏻

My pleasure...🍻 And a tip of my hat to the razzman...🍻