So, I am actually using this case. Currently I have a 5900X cooled by a Noctua NH-D15S Chromax Black and an ASUS Strix 3090 GPU below. PSU is a Seasonic GX-1000. I am shocked at how cool this case really runs. The GPU is able to draw its own air from the bottom. Given the 3090's size, there isn't enough room for any fans below the GPU (not that you'd want any). The Noctua cooler also touches the GPU backplate. Having said that, I have thrown full load at this setup and couldn't get it to go above 80C. For fans I have only the front 180mm fan, the single fan for the NH-D15S, and a slim Noctua NF-A12 120mm fan at the back. The only thing I've really done outside the box is the case sits on little feet I cut for it to make it sit higher. I noted a drop in temps on the GPU when raising the bottom up an extra inch, but it's likely due to where my computer sits on my desk. One side is stuck against a wall.
@DrTopLiftDPT2 жыл бұрын
why would u want glass to see the cables on the back?
@CuttinInIdaho Жыл бұрын
This is a massive itx case. massive
@pauld42382 жыл бұрын
I really like the look of these Torrent cases. If I only had a reason to build a new pc and the cash flow for it.
@iclonethefirst2 жыл бұрын
Same. But since they only differ in size, I'm thinking about picking the compact over the nano
@BlissBatch2 жыл бұрын
Why do you want a reason to have to build a PC during a GPU shortage? Be grateful that you already have a good system!
@lorenzomasini17152 жыл бұрын
Me too dude
@SUSHI4lyf2 жыл бұрын
I really like the look too. It's just gonna be some extra work cleaning the grills versus just wiping down a somehow flat front. 😁
@Pead9292 жыл бұрын
I’m about to swap my case before a mobo refresh
@samal902 жыл бұрын
It's amazing. Will use this one for my Zen 4 build this winter.
@Otuhh2 жыл бұрын
With the case being that big, it might as well have been an matx case. Still very neat. Still waiting on an update for the meshify c mini to get those pop in glass side panels.
@Lennox0322 жыл бұрын
I was just thinking that, very nice case but its basically a matx sized case
@RussellKasem2 жыл бұрын
They have the Torrent Compact too. Both were released today!
@stancartmankenny2 жыл бұрын
I was gonna say that. GET OUT OF MY HEAD!
@Lennox0322 жыл бұрын
@@stancartmankenny great minds and all! love your profile pic Jack Torrence
@techroom68302 жыл бұрын
my thoughts exactly, this size would've been perfect for those looking for a small matx case since most are only marginally smaller than actual full size mid towers
@Kaymen19802 жыл бұрын
I love big itx cases... Just because I want itx, it doesn't mean I want to build a tiny computer.. I don't want to have an unnecessary large case, but I want room for dual 280 and 360 mm rads. Makes sense?
@RoomInPiss2 жыл бұрын
only the price isn't :(
@ronniekregar34822 жыл бұрын
Makes no sense at all lol
@Kaymen19802 жыл бұрын
@@ronniekregar3482 I want to eliminate the dead space from unused PCI and ram slots, but I still want to run "big cooling".. The O11 mini is such a case.. But more options would be great.
@ronniekregar34822 жыл бұрын
@@Kaymen1980 lol, so you want a big ass box of fans with a few small computer parts mixed in?
@Kaymen19802 жыл бұрын
@@ronniekregar3482 If the 011 Mini is what you consider to be a "big ass case", then yeah.
@antftwx2 жыл бұрын
This case is MASSIVE for ITX, but with one more PCI slot it could've been a decent mid-size MATX case. Missed opportunity there.
@Draaghail2 жыл бұрын
Yep, would rather go for Sama Im01.
@conyo9852 жыл бұрын
They need to make a MATX version for sure.
@stancartmankenny2 жыл бұрын
Yup.
@senraXD2 жыл бұрын
My Noctua NH-D15 fits in it so I'm not complaining. Pretty sure it was meant for big air coolers. Just because it only supports mITX/mDTX boards doesn't mean it has to be tiny.
@antftwx2 жыл бұрын
@@senraXD No, I get that. I'm jut saying that it wouldn't need to be much larger, just a few millimeters here and there, and it could easily fit a micro atx mobo. That would make this a potential case for the mff fans out there. As it is, if I want a torrent case for my build, the smallest I can use is the compact, which would look ridiculously empty with a micro atx mobo and scythe mugen 5 cooler.
@chrisstewart127310 ай бұрын
I have one. GPU Thermals are not good. The intake from the 180mm blows cool air across the top of the GPU and the positive pressure seems to trap hot air around the GPU. I reversed the 180mm to exhaust (and also reversed the rear 120mm and CPU fans to intake) and GPU temp dropped 15-20 degrees (RX7800XT). I can game or run stress tests and the fan never has to exceed 700RPM so it's virtually silent. Just need to somehow put a dust filter over the rear fan back panel now.
@Tech2C9 ай бұрын
Clever
@GainingDespair2 жыл бұрын
I like it, might be the case that finally pushes me into the ITX form factor.
@perdomot2 жыл бұрын
Based on the position of the 180mm fan, I'd say switching to 2 140mm fans would provide better airflow and lower temps especially to the graphics card. Hope you do a follow up on this review Leo.
@samgoff52892 жыл бұрын
So half the money for the case will be wasted pulling that fan out of there and then spend extra to buy 2 140mm fan too? Just buy a better case this thing sucks
@zeoz911 Жыл бұрын
@@samgoff5289It's a pretty good case with great airflow. Saying it sucks it's kind of lame. Can you name some mitx cases that are better than this?
@Fighting-Egg2 жыл бұрын
I really dig the design, too bad it's 33L. If they'd go with SFX (reduce height and width) and no 180 in the front (reduce mostly width) this thing would be better imo. I don't understand that 180 anyway, to me 2x140 aircooled or 2x120 on a rad would make much more sense given the mostly open front
@zwerker Жыл бұрын
You just described a theoretical Torrent Pico case!
@oxyuran59982 жыл бұрын
*me not looking at the screen "At 50% it sounds like this." * ad starts blaring * my brain "... Damn thats an awfull sou... Oh, wait..." 🤣🤣
@bitelogger Жыл бұрын
I love this case from your build, I think I will consider it for my NAS
@joshuaarrebola34302 жыл бұрын
It’s looking good to me, I’m happy with what it can do. I’ve got the Torrent OG and the Nano is the perfect small footprint Gaming Case to me. I’ll be buying once it’s out.
@k12rising2 жыл бұрын
It's crap. Fractal can't make a good ITX case to save there company
@sunlightheaven2 жыл бұрын
Watched your and Steve from GN review for Torrent. Got it. Still watched reviews for Compact and Nano versions. For science. I also have U12A cooling 5900x and It works great. A bit sad that when I got it there was no Chromax Black version.
@aegiltech2 жыл бұрын
IMO, that 180mm fan is placed too high in the case and is starving the GPU of air. Seems almost mandatory to replace the front with 2x140mm. I wonder about fan clearance at the bottom of the case with effectively '3 slot' cards as well.
@stancartmankenny2 жыл бұрын
looking at the diagram at 6:43, it might be possible to flip the brackets upside down for a lower positioning of the 180. Or you can go with 2 smaller fans
@evilmarc2 жыл бұрын
I’d be curious about an airflow smoke test but to me it seems like the GPU is close enough to the bottom it’ll draw in cool air with its own fans
@MrDvneil2 жыл бұрын
turn noctua fans to the other side blowing to the front of the case, and turn the front fan as exhaust, and remove bottom filter. on itx cases gpu requires that the case has exhaust fans, to help the air come in from the bottom.
@alby20462 жыл бұрын
I think you reversed the fan RPMs to 75%, that being said, great review. I think the gpu temps are especially high due to the lack of airflow, the 180 fan is way up there to provide better airflow for the cpu cooler and at the same time to provide more compatibility for the length of the gpu. I think by putting 2 120 or 140 fans in the front the situation could improve.
@KitGuruTech2 жыл бұрын
Yes it's an annoying typo on the chart in the video which has been fixed on the page www.kitguru.net/components/cases/leo-waldock/fractal-design-torrent-nano-dark-and-moody
@chrisbullock64779 ай бұрын
You could also go with two 140mm slim fans for the much longer Nvidia GPU's
@chrisbullock64779 ай бұрын
@@KitGuruTech Where are these cases now, did Fractal cut manufacturing of this case?
@Timmy51m8 ай бұрын
@@chrisbullock6477 Widely available in the UK. Ebuyer, Scan, Amazon
@ghost_of_m4032 жыл бұрын
Well I am surprised by so many M-ATX enthusiasts in the comments. :D I personally wouldn't mind the larger size for this if it were actually possible to get a larger GPU as well as a 280MM AIO in there at the same time. But it seems like you could probably fit a D15 in there for air cooling, so there is definitely a market for ITX buyers on the higher end of the performance scale.
@anhiirr2 жыл бұрын
LMAO its like have they ever seen INTEL matx prices...the cost to run a k chip on M-atx XD. I can understand a 12400 on a b660m Or a b660i. But when i see the amount of vaible b550m and hell i got a 85$ b550m pro vdh as an open box that i sold in a mb311 build. It astonishes me how many ppl want m-atx. I previously used a 205m but it has terrible airflow. i can understand the desire for a good performing m-atx chassis for air cooling that could pass using a 5700xt with an air cooled cpu....as a large basis of worst case scenario. BC they want a beefy gpu and just a few expansion slots like for a capture card. In reality using something like that you would want it further from your gpu bc of heat. But man the recent jump in m-atx more matx love is kind of surprising me. Ive been saying this ever since i built my friend that 10600k build with a well priced 180$ z490m in the lian li 205m. That was the last time i saw a really "decent" k series capable intel m-atx board.
@Grommet20072 жыл бұрын
Sigh, I wish the white version of this case was available when I built my last DIY PC. I couldn't find a white mini-ITX case that met ALL of my needs like this one does, and ended up going with a Define S Nano instead. As for cooling / airflow, I think that could be helped by using a decent exhaust fan, rather than leaving the hot air to find its way out of the case
@jamiehall82725 ай бұрын
exactly this...
@JaschaL2 жыл бұрын
in the new nano you can put out the dust filter in front now.
@Whatness2 жыл бұрын
The styling of this case reminds me of the latest design language in US pickup trucks. Make the grill as large as a Mack Truck (so it looks bigger) while somehow only allowing for the same amount of cooling potential as a truck from the 90's.
@ryanwong34692 жыл бұрын
For those who want itx case and don't want AIO watercooling, this and the Lian Li tu150 are the best choice as both have a front intake fan. This one come with the 180mm fan even better. Tu 150 can fit my Noctua D15 air cooler though. Not sure if this can.
@kost3rtube5542 жыл бұрын
Good day sir. I have found your channel by looking for this absolute beauty of a small case. Thanks for showing the different speeds of fans with temp. I agree, not the best. BUT as you said... Normal use would not push that amount of noise and heat @50% fanspeed Ik think the balance between size, beauty, stockfan use performance is something worth noticing. The GPU having acces to basicly fresh air at the bottom makes all the smaller build with risers, that only work correctly with mesh side panels, unnecessary expensive. I do have a question... In your other video there was a noticeable lack of space for cable management in the Torrent Compact (backpanel) Are my eyes still correct by noticing more space in the Nano version at the backpanel? Could you confirm that? Thanks anyway for a quick review/build/testing vid.
@KitGuruTech2 жыл бұрын
Welcome aboard. You are quite correct about cable space in the Compact and Nano. Fractal told me they wanted to reduce the size of the Compact as much as possible but when it came to the Nano they knew the cables on an ATX power supply would necessarily have a good deal of slack so they had to provide space for cable management. So yes, more space in Nano than Compact. Leo
@kost3rtube5542 жыл бұрын
@@KitGuruTech much appreciated for the confirmation
@anticat9002 жыл бұрын
Great technical video, but poorly specified kit for the case. Preferably, 3 slim 120mm under gpu fans and a 120mm rear fan should been there. Also a test with 2 140mm fans at the front would have been optimal as push alot more than the 1x 180mm?
@johnsteburg58802 жыл бұрын
After reading the comments some where there has been some confusion on the 2 new Torrents size usage. The Torrent Compact is more suited for Micro ATX than ATX and the Torrent Nano is a pure Mini ITX case. Same pattern was used on the original Define series. Being an Mini ITX person this is the right size case to use. Glad the finally did a Nano upgrade.
@kyoudaiken2 жыл бұрын
Hey Leo, please test it with 2 140mm at the front. I think the culprit is the 180mm fan.
@KitGuruTech2 жыл бұрын
As said in the review, removing the 180mm fan and installing 2x 120mm or 2x 140mm would transform the case
@kyoudaiken2 жыл бұрын
@@KitGuruTech So you think it will improve temperatures? I have the feeling the 180mm fans might have not enough suction power to overcome the dust filter that well. I think 140mm is the biggest reasonable fan frame size.
@KitGuruTech2 жыл бұрын
@@kyoudaiken Dunno about that. I'm not saying it would transform it either for better or worse more that you are removing a hefty percentage of the cost of the case and also transforming the aesthetic. It's not an unreasonable thing to do but suggests you would be better starting off with a different case. leo
@kyoudaiken2 жыл бұрын
@@KitGuruTech Yep that is a fair point. Thanks!
@Grommet20072 жыл бұрын
@@kyoudaiken FWIW, for my previous DIY PC build used a Silverstone Tek tj08b case with a built-in 180mm fan and it did a pretty good job of keeping things cool, with the added advantage of being able to run at a lower speed to do so. Adding an exhaust fan at the back of the case however is what made the most difference in that build.
@victorhenostroza18712 жыл бұрын
Could be smaller with sfx-l space ar the top
@Zombie101 Жыл бұрын
they need to make this mATX, thats it
@sckirbyc1 Жыл бұрын
Would a 7900xtx sapphire nitro+ fit in this case, width wise?
@user-tq7ci3wd2z Жыл бұрын
Good video. I love your accent.
@QuentinStephens2 жыл бұрын
What a pity there are so few DDR4 ITX LGA 1700 motherboards to use with it.
@elteacher0223 Жыл бұрын
Hello, thanks for the video... Im planning to buy a Liquid Freezer 2 from Arctic... I have a Gigabyte Aorus z690i Ulta lite d4, it has a junky vrm and nvme heatsink, do you think the pump will fit ok?
@carlosmvaldivia2 жыл бұрын
The lian li tu150 is a smaller mini-itx case with a similar design. Would be interested in the camparrison...
@johnsteburg58802 жыл бұрын
I've used both the Lian Li TU 150 and the Original Fractal Design Define Nano S Silent Window. The Lian Li has no cable management and there really is very little room for bigger GPUs. But the original Nano Had the room and cable management which made a more cleaner looking build.
@meteor1522 Жыл бұрын
Such a shame that this case has bad thermals,because it looks absolutely beautiful and better than compact version.
@user-eu5ol7mx8y8 ай бұрын
Someone should re-test it with 2 additional fans installed at the bottom. I think it would make a difference
@firepro202 жыл бұрын
Is the accessory pack included in the case box or bought separately?
@MultiSciGeek9 ай бұрын
A shame it's such a hassle to remove the 180 front fan. Cause I'd love to have it all black without tinted glass except one RGB fan.
@jonathanellis60972 жыл бұрын
09:14 guessing the fan speeds for the Fractal fan have been mixed up? The chart has the Fractal fan at a higher speed at 75% than at 100%.
@KitGuruTech2 жыл бұрын
Well spotted - the figures at 75% should be the other way around so 900rpm for the 180mm fans and 1,500rpm for the Noctua fans.
@atthelord2 жыл бұрын
I hear you, but dont you think the itx form factor is really picking up off late ? We’re seeing more itx cases, motherboards and even readymade builds..
@StrudlePie2 жыл бұрын
I want to know what the temps would be with 2 x 120/140mm fans in the front... as this case is reasonably priced, good looking and flexible
@MrDvneil2 жыл бұрын
barely the same, is just a bad setup to place an intake fan in an itx case that don't give direct air to the gpu. That case requires a different configuration, same with the torrent atx, 5 intake fans, is a nosense.
@TheFl1pp2 жыл бұрын
Corsair HX1000i will it fit in there?
@falxie_2 жыл бұрын
Just ordered this case to upgrade from my Node 304 so I can water cool
@MultiSciGeek Жыл бұрын
I don't want a full ATX but at the same time laptops are too hot and slightly too expensive. Is this the best middle ground? And thanks for all the tips in this video.
@TheTastefulThickness3 ай бұрын
O.o
@maxabillon2 жыл бұрын
The BitFenix Prodigy M 2022 Edition a bit smaller & takes M-ATX , I Wait & see if we get a Compact Torrent NANO, This could be like the Matryoshka nesting doll, A set of typically seven wooden dolls of decreasing sizes.
@oneone83182 жыл бұрын
Built quality and cable management are good. however i´d rather have metal door with venting holes next to gpu instead of glass door and rgb
@guillaume5035 Жыл бұрын
Ok so considering that there is no fan on the back, the temperature are very good!
@pluviamachina35832 жыл бұрын
Why didn't you put an exhaust fan at the rear? Did you actually try to fit fans in the bottom tray?
@KitGuruTech2 жыл бұрын
We are reviewing the case so adding extra fans isn't really part of the brief. Having said that the rear of the case is fairly close to the fans on the Noctua so it might not be much of an issue and the floor of the case is very, very close the the graphics card and probably would not help the cause.
@alexrahardjazh9 ай бұрын
If the Nano size case can house 2 140 mm fan say noctua then adding deskfan at the front or air cooler that not spray any myat at all, the cooling effect shall be superb. Test that thing ua8ng inverter welder at the workplace. The cooler rhe system the superb the welding performance. So the same should works on the pc. Aircooler nano is superb if the fan can house 2 140 fan The airflow should be greater than a single 180 mm One at he top front the other at the lower front. Adding with the bottom s8de of the fan thar should able to gives more airflow. The airspace of the bottom shpuld be a bit higher. Say around 1 cm higher. The draft of.air should be increase. Use the rubber to make it higher. Will do😊😊😊😊
@AdamAshfordSmith2 жыл бұрын
Quick question. Is the RGB strip built into the case a 5V 3-pin or a 12V 4-pin? Having trouble finding that information. If it was said in the video I missed it 😁
@KitGuruTech2 жыл бұрын
You are quite correct, I did not mention it. It is ARGB so 5V and 3-pin. Leo
@rip.tear.2 жыл бұрын
It doesn't look like there's enough space for that Radeon card plus normal 25mm thick fans, is this correct?
@KitGuruTech2 жыл бұрын
It's fine kzfaq.info/get/bejne/bdWWrap_x9q6ep8.html Assuming you are talking about fans in the floor rather than the front, there is such tight clearance this might be one for deshrouding, rather than adding fans next to the stock cooler
@vsundarraj Жыл бұрын
Great videos... Cant help but you remind me of Gollum ...lol
@blacksama_ Жыл бұрын
Is this portable meaning can you take it with you in a flight? I am thinking in building a portable system for traveling but need it to be heavily cooled yet portable, this case seems like covers the former but unsure how portable it is.
@scarkillerful Жыл бұрын
Go look at the Lian Li A4 H2O. That's 3x smaller than this monstrosity, and actually warrants using ITX components.
@Duelweb Жыл бұрын
Are these cases quite ?? Cos if not, it's a dealbreaker for me.
@jwvst2 жыл бұрын
Damn, with that name I had hoped for something much smaller (NR200 Esque)..
@shankroidbeast464411 ай бұрын
You could add two 120mm low profile fans in the bottom and one in the back and the temps would be quite a bit better, and two 140mm in the front would move a lot more air than one 180mm. Make them all ARGB, and that would look pretty cool!
@GeoStreber2 жыл бұрын
Idk, the top cover and the front on all the Torrents feels too plasticky for my taste. I'll go for Define 7XL with my next build.
@vollhorst1402 жыл бұрын
Damn, that thing is a massiv itx case, could have easily housed a micro itx board. I don't like this case, if i go itx i want a small pc.
@maxabillon2 жыл бұрын
Only draw back is the low bottom GPU mounting, Nvidia /AMD 3 half slot/ 4 slot Cards be a NO,NO & lack of vertical GPU mount.
@RetroBerner2 жыл бұрын
I bet it would work a lot better with two front fans, at least the GPU will get some fresh air that way
@Grommet20072 жыл бұрын
Maybe it's possible to shift the 180 mm fan closer to the bottom of the case? Looks that way from the removable bracket arrangement. Just swap the top and bottom sections and move the fan down a bit.. In any case, it looks like the GPU is drawing fresh air through the bottom of the case.
@unclerubo2 жыл бұрын
It's very poor value compared to its full size counterpart, which came with 2x180 and 3x140 fans. Cutting the price by so little while removing most of its cooling potential is not a good deal by any means...
@swizzler80532 жыл бұрын
It's way smaller. It's for an SF build. I kinda dig it.
@unclerubo2 жыл бұрын
@@swizzler8053 looks great, but it should be waaaay cheaper.
@420Cris2 жыл бұрын
@@unclerubo have you seen most itx cases? Many are $200+ so this is pretty cheap for how small it is, the price is for the convenience of space and travel, not for its cooling potential. It'd be a lot easier to take that PC with you than it would with the full size version.
@unclerubo2 жыл бұрын
@@420Cris my raijintek ophion was 130€ including the optional perforated aluminium side panels, and it includes a pcie riser cable, while being only 14L in volume.
@unclerubo2 жыл бұрын
@@420Cris and I'm not hating on Fractal. My main case is a meshify 2 and my NAS is in a define 6.
@k12rising2 жыл бұрын
Whats the point of making this case if it's bigger than Define Nano S? Nice design but way too big for ITX... And "relatively cheap" is not £120 🤦
@weirdodude11732 жыл бұрын
For me the issue is that it's not really possible to use fans at the bottom of the case and have them work well. The compact version is better than the nano, in this regard. Thumbs up for one of the best reviewers around.
@denysak2 жыл бұрын
Not that nano at all ). FD's concept of nano, but nice 👍
@nunyadambidniss2 жыл бұрын
Ummm... Where do the drives go again ??? One thing that irks me about a decent majority of these modern cases is how they seem to HATE putting the drive bays in a place that actually makes sense ! You don't just randomly throw in a spot here &there, LOL It's already bad enuff we can't get a SINGLE 5.25 inch for a frikkin' BLUE RAY DRIVE O_o
@chloedegurechaff19412 жыл бұрын
theres two 2.5 at the back. and the 3.5 at the top. plus whatever m.2 you have on your board. seeing how most, if not all ITX boards only have 4 sata. I'd say thats a good spread. tho for its size, three 2.5 drives would be more appreciated.
@thatsthamove10 ай бұрын
I wanted this case so bad. It just wouldn’t pass any compatibility checks for any of the 4080s I wanted. Overpaying for a founders edition wasn’t an option, and the proart and msi ventus where reasonable substitutions, but the OC version supposedly makes u download the msi bloat to get the oc advantage and even then it’s core clocks and comparisons with a FE card were identical with almost less than 1% increase in benefits. Such a bummer
@thethiagosc2 жыл бұрын
clearly a tair cooler case, all options to watercooling it shits. Loved it, unfortunately on my thirdy world home we can't buy it.
@Deez_Nutz5102 жыл бұрын
Sweeter than a swisher?
@Fandango2034 Жыл бұрын
THAT IS SEXY. Love the look. def building one
@leedaq77672 жыл бұрын
this is where my cash will go this time
@avgjoesgamin99352 жыл бұрын
i would use this case in a heart beat. but the tg panel on the back kills it for me. its liker there market manager is an IDIOT. I currently use the NR200 the problem i have is the sfx psu with an nvidia 3080ti fe. the 850 watt evga sfx psu still has issues with tripping the overvolt circuitry.
@CurrentRapCurrents2 жыл бұрын
11:45 I disagree. I'd take out the 180mm fan and install 2x 140mm fans... if I were to get this case, which i wouldn't.
@notchipotle8 ай бұрын
I think it's pointless for most people, ITX boards are expensive, so if the case is just as big as an mATX case, there are no benefits to use it
@markusjohansson49496 ай бұрын
For being "nano" it's pretty big. No need for all that empty space.
@vqa3311 ай бұрын
nano huyano, if you want a good pc buy normal initial version of torrent
@edmundyung2 жыл бұрын
There's no way the GPU is able to take sufficient fresh air from the bottom with this kind of positive pressure setup. The front 180mm is creating that positive pressure and the GPU would just take in lots of waste heat from itself. 100% on the 180mm may push fresh air for the GPU, but it is noisy. Try adding a couple of intake fans on the bottom for the GPU.
@James-dy6zh2 жыл бұрын
not worth it to build smaller systems when the itx motherboard and case cost more than the regular ATX size. waste of money lack of performance
@ronniekregar34822 жыл бұрын
So says you...
@Chaserbl2 жыл бұрын
Terrible airflow even though it is supposed to be "good" Just meh.
@thethiagosc2 жыл бұрын
this case asks for the biggest GPU without plastic shit and fans with 2x 140mm on negative pushing air to the bottom of it without filter.
@ivey774262 жыл бұрын
Fractal continues make same mistakes. In times when there are lots of sub 20 liter itx cases... they continue to spit out 33 liter monsters like it's 2010. This product is obsolete on arrival.