Framing a Basement Wall for Beginners in 2024

Рет қаралды 62,405

Күн бұрын

This video is for beginners who want to frame a basement wall. We'll show you the basics of framing a basement wall, including the tools you'll need and the steps you'll take.
My buddy Alan wanted to turn a part of his basement into a home gym, so he asked if I would help and I said, sure! I told him that it would be a perfect excuse to make a video showing others how they can frame their own basement wall.
There are many other videos that go into much more detail so think of this video as a quick crash course on what to expect.
Materials Used in Video
(these are affiliate links which help sponsor the content!)
_______________________________________________________________
Loctite PL300 Foamboard Adhesive: amzn.to/3vcbf0G
Caulking Gun: amzn.to/41zmHzu
Screws: amzn.to/3GTRihD
Tapcon Concrete Anchor Screws: amzn.to/4arnJ4N
FOAMULAR 1/2 in. x 4ft. x 8ft Foam Board Insulation Sheathing
Pressure Treated 2x4
Regular 2x4
Tools Used in Video
(these are affiliate links which help sponsor the content!)
_______________________________________________________________
Box Cutter: amzn.to/3GWcKCC
Tape Measure: amzn.to/3TDCeMU
Safety Glasses: amzn.to/3NGcfR4
Speed Square: amzn.to/3RVinHq
Chalk Line: amzn.to/3GVjXTu
Impact Driver: amzn.to/48rsZU0
Hammer Drill: amzn.to/47dakdN
Circular Saw: amzn.to/47r7dix
Hammer Drill Bit: amzn.to/3NE58sc
Level: amzn.to/4avSIws
Dewalt Battery: amzn.to/3THu5Hj
Carpenter Pencil: amzn.to/3tqCGTZ

Пікірлер: 61

@buildingwithbobby 5 ай бұрын

Biggest take away from todays video is that working with your friends is more fun. Let me know if we should ask Alan to be in more build videos.

@battlefrontnews4035 3 ай бұрын

It may be more fun but unfortunately when I work with my friends I end up goofing off more than working lol

@buildingwithbobby 3 ай бұрын

🤣so true@@battlefrontnews4035

@JT_70 3 ай бұрын

I enjoyed your detailed commentary and delivery. Well done!

@buildingwithbobby 3 ай бұрын

Thank you! 🙏🏻

@SleeperHoundDesign 5 ай бұрын

Awesome job!

@buildingwithbobby 5 ай бұрын

Thank you! 🙌🏻

@ViSongs482 3 ай бұрын

Just curious, wouldn't you want to tape of the seems of the foam board to make it a solid vapour barrier? What about the upper portion of the exterior wall, do you not put up plastic or some form of vapour barrier? Thanks

@buildingwithbobby 3 ай бұрын

Well technically I miss spoke about the foam board being a vapor barrier. You could seal the seams with tape to make a complete seal for sure and it would help some. As for the upper part of the wall that part is above grade so it is just like a normal wall framed up with fiberglass insulation and a craft face as a vapor barrier. I hope this helps.

@rosewilcox7988 4 ай бұрын

How do u measure out you interiors walls lines what more do u add or take off for that measurement

@buildingwithbobby 4 ай бұрын

If I’m understanding your question correctly. You subtract 3 1/2 inches per interior wall that you’re trying to go in between.

@tobynormoyle637 2 ай бұрын

Love that you used screws for everything!

@buildingwithbobby 2 ай бұрын

You might be the only person who does 😂🙌🏻🙏🏻

@mikecrowe3164 Ай бұрын

Love the video! Question: did you use 2x4x8 or 2x4x12? Is there a benefit over using one over another?

@buildingwithbobby Ай бұрын

Most of the 2x was 8’. Longer lengths would be used for longer top and bottom plates. You can use any length you need for your wall height.

@lunam7249 Ай бұрын

if its a king stud or jack stud you have to make it sledge hammer tight...92. 3/16 will leave 1/32 inch gap = fail inspection, 92. 1/4 hammer tight = pass, use level on all 3 sides

@stevenleiler9034 5 ай бұрын

How is the foam a vapor barrier and allowing the concert breath? You get one or the other not both.

@alanheidecke7464 5 ай бұрын

That’s why they invented the foam sheets DIPSHIT

@buildingwithbobby 5 ай бұрын

Yep you are correct. I misspoke there, so best to watch without the sound on to anyone reading this. Sincerely, Bobby's slow brain and fast mouth 👍

@bigjohn2810 3 ай бұрын

As per "homes on homes show", First build 2x4 wall and leave space between studs and concrete, Then spray foam "closed cell", You will have a vapor barrier & insulation, 100% coverage. Your method, the walls will sweat! kzfaq.info/get/bejne/rN1-jK9q1picZ6c.html @ 31:25 kzfaq.info/get/bejne/hrujiKpnyZqblYU.html

@busterhimself 3 ай бұрын

I believe you are to apply the adhesive in straight lines up and down, this allowed for any water/moisture to travel down in-between the foundation and foam insulation.

@Trainman0401 4 ай бұрын

Nice clean job but if you get it inspected there may be an issue with fireblocking. I didn’t see you addressing this critical step.

@buildingwithbobby 3 ай бұрын

I did not do any fire blocking no. I always thought fire block was needed when you went from one room to another or from below to above in homes. You seal all the holes and such with fire block foam to prevent the spread. This build other than drywall on the ceiling not sure any fire block was needed.

@Trainman0401 3 ай бұрын

@@buildingwithbobby Fire blocking is definitely required and can add a great deal of extra work in order to comply with recent building codes. However, if you did not file for a permit then your work will never be subject to inspection until you sell your home.

@JF-gl8hh 2 ай бұрын

Likewise, depending upon how strict your building code enforcement is, you have to build a “fire rated assembly”. Just any spray foam for fire blocking will not suffice. And the thickness of the floor matters as well as the type and thickness of drywall. Any joining walls to the ceiling assembly must also account for fire blocking and fire stopping (two different things).

@lunam7249 Ай бұрын

in california and international resident code requires vapor barrier between concrete floor and bottom plate

@buildingwithbobby Ай бұрын

Right on. Good to know!

@lunam7249 Ай бұрын

@@buildingwithbobby california is viscious with codes!, but do it right and no tear down regrets later!!!!🌝

@stephanie82653 2 ай бұрын

Should I frame my basement walls if I have mirror falling and some mold bubblrs

@buildingwithbobby 2 ай бұрын

If there is any mold I would address that before covering it up. If you cover it, it will continue to grow and become a major issue.

@MStoff88 4 ай бұрын

How far away from the insulation do you put your chalk line? I'm about to start a project and have that half-upper wall insulation going around my entire basement. I head it was 5 inches from the concrete, but wanted to know your thoughts. (Our building codes don't specify)

@buildingwithbobby 4 ай бұрын

You really only need a 1/2" from the foundation and insulation. So if you use a 2x4 wall your chalk line should be at least 4" away from the wall. So I'd say anywhere from 4" to 5" is fine. I hope that helps and best of luck with the project!

@MStoff88 4 ай бұрын

Thanks man!!

@buildingwithbobby 4 ай бұрын

@@MStoff88 you're welcome!

@RaymondTusk74 4 ай бұрын

You can frame right against the foam, you don’t need a chalk line

@JohnnyUtah9173 4 ай бұрын

⁠@@RaymondTusk74as long as the wall is perfectly plumb

@carryssablundon72 4 ай бұрын

Is there a way to add the frames to the floor without drilling a hole in the concrete?

@RaymondTusk74 4 ай бұрын

You can use a ramset. It’s not too expensive if you don’t already have an impact drill

@buildingwithbobby 4 ай бұрын

I once used masonry nails. You drive them with a hammer, but it is pretty difficult. It worked, I was skeptical. It has now almost been 20 years and the wall is still where it needs to be.

@outdoorlife9410 2 ай бұрын

You can glue them down with liquid nail but anchor is best