How to program 2013-2015 BMW 328i Smart Key with Autel IM608 FEM/BDC System "Process Explained"

Рет қаралды 33,666

Жыл бұрын

If you are looking to program a 2013-2015 BMW 328i key with the Autel IM608 FEM/BCD system, then this video is for you! In this video, I'll walk you through the entire process of programming a smart key with the Autel IM608 FEM/BCD system.
By the end of this video, you'll know how to program a 2013-2015 BMW 328i smart key with the Autel IM608 FEM/BCD system. So if you're looking to upgrade your car's key, then this is the video for you!
Check out my social media!!!!!
Snapchat- / javin
facebook- / regzastar
Insta- / nietojavi
Tiktok-www.tiktok.com...
=====================================================================
Hi guys welcome to my channel i have been working on cars my whole life and now that i have accumulated tons of experience and knowledge i want to share it with you.
I upload new videos every week stay tuned!!!!
Thanks for watching, please like and subscribe and god bless you!!
Disclaimer: JVFIX assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. These videos are only for educational purposes and i am not responsible for ANY INJURIES OR ACCIDENTS, DO IT AT YOUR OWN RISK!!!

Пікірлер: 109

@fadilabban5769 8 ай бұрын

Hello, I love your videos, I have not done a BMW yet, but programming keys is sometimes stressful.

@JVFIXLLC 8 ай бұрын

yea sometimes specially when is all keys lost

@partoems9376 Ай бұрын

depends on the tool employed to do the add key or akl. autohex does it simple with little or no stress. just autohex is very expensive tool but among the best in its class.

@alejandromillan4519 Жыл бұрын

Gracias a tu vídeo pude programar una llave para un 2016 bmw 328i y me paso lo mismo que a ti que después de programar la llave no prendió y me fui a restore eprom data and it works the car starts. Gracias muchas gracias por tu vídeo

@JVFIXLLC Жыл бұрын

gracias por visitar el canal

@computerisedcarandtruckdia9489 Жыл бұрын

Very informative video. Thank you.

@JVFIXLLC Жыл бұрын

thanks for watching

@Best-hz8wt 11 ай бұрын

Place, could you please make one more video for bmw 2016+ . I think a lots of people interested in that.. Thank you.

@JVFIXLLC 10 ай бұрын

as soon as I get one I will make a video

@julezxbandit6734 3 ай бұрын

well if you had a 608 pro 2 you can read from the obd 2 socket

@JVFIXLLC 3 ай бұрын

yes u can

@mihaicatalin9701 4 ай бұрын

Hi. Can it be done without the J box? Thank you

@JVFIXLLC 4 ай бұрын

yea u need it

@bobhutchins557 Жыл бұрын

Thanks for a great video (as always)! However, I did get lost several times from the middle of the video to the end. I've never done one of these FEM systems before so it's all new to me. But I really got lost after you wrote the EEPROM, reinstalled the FEM, took the FEM back out, did some more stuff, put the FEM back in, tried to learn the new key, learned it, key didn't start the vehicle, clicked on "Repair" and something got fixed so the key worked after that. I got (and am still) confused from 15:20 to the end. It seems you did several things (or maybe you didn't) that aren't on the video in that 7 minute span. From 15:45 (or so) to 16:15 you mentioned a bunch of things, ending with "you're going to get your original file. You have to disconnect just the power and plug the EEPROM. I already did that and it worked..." Then you had to get the password (would you have needed to get the password anyway, or was it because of the corrupt EEPROM that had to get restored?). Then, well, I was just lost. Not your fault. I just need to learn more.

@JVFIXLLC Жыл бұрын

ye these systems are a bit complicated sometimes I did it like that just in case it ever happens to someone that way you can restore it back in case you messed up. it's possible that it might work on the first try but yea that's how these new systems for bmw are designed.

@jamescc2010 Жыл бұрын

@@JVFIXLLC I find BMW and Mercedes to be complicated maybe 5-10 times difficulty level, requering more tool investment and learning curve, on different models than Japanese and USA makes for sure. Just got im508 and BGOX so I have to learn. Did VW add key one time as far as Euro car lol. For sure, pay will be much higher once you are good at.

@Best-hz8wt 11 ай бұрын

Is this procedure the same for akl? I got lost while procedure. Sow could you please text what to do. Like 1 read epprom. 2 modify epprom 3 write epprom back. 4 key learning ( precoding) etc. I lost after that. Thank you for your time!!😊

@JVFIXLLC 10 ай бұрын

this process is for all keys lost if you want to add a key u can easily do it by obd2 together with the xp400pro and aki I have never used that one sounds more complicated lol

@Eurosmithpro Жыл бұрын

So your original "modified eeprom file" wouldnt load? why? So you had to flash the original "back up" file and then start over???Is this what happened? Hard to know cause you didnt really explain what happened, why it happened, or even show how you fixed it?

@mitchellnundlall3729 Жыл бұрын

Yes I tried doesn't read

@kennygarland5210 Жыл бұрын

Dont even try and follow this video...They are amateurs that dont know what they are doing..

@JVFIXLLC Жыл бұрын

apologize for the confusion i revised the video and i noticed i cut part of the film by error, this process is used on all keys lost situation if you want to add a key there is no need to open the FEM.

@JVFIXLLC Жыл бұрын

@macartur66 Жыл бұрын

@@JVFIXLLC I was wondering why would you have to do it on the bench just to add a key, I have added keys via OBD to a 2018 3 series

@mbo7613 9 ай бұрын

Will this work for a 2015 manufactured in October 2014? Local locksmith is telling be 2015 and up are dealer only?

@JVFIXLLC 9 ай бұрын

mmm that's an interesting one. do u have vin# maybe I can look something ip

@fishonnelson2353 7 ай бұрын

Great work mi amigo! Muy Bien! Y gracias!

@JVFIXLLC 7 ай бұрын

no problem

@doctorhvacr5869 9 ай бұрын

what if you have no working key every video everyone has a working key we need a video without working key AKL

@JVFIXLLC 8 ай бұрын

with this scanner you can do all keys lost, is pretty much the same process. sometimes is difficult but with time you get experience and it becomes easier

@Peter-hw1yx Жыл бұрын

So what exactly did the Autel im608 do when you pressed write operation ? Just created another slot to use for standard programming?

@JVFIXLLC Жыл бұрын

yea it was done all automatically just following the steps. is easier when u add a key. when is all keys lost u need to disassemble module

@AriasElectronics 4 ай бұрын

Good job bro! Thanks

@JVFIXLLC 4 ай бұрын

no problem

@ronaldkakande6315 5 ай бұрын

Good educational video, can Autel im508s do it!?

@JVFIXLLC 5 ай бұрын

It should if you have the xp400

@arvinmohabir6044 Жыл бұрын

hey bro, the last part where you had to put the key and leave it and press ignition for 10 secs..... i saw you cut the video at that part.. what did you do to get it to work?? I'm having issues with that last part.. remote functions doesn't work and I've to brace key on coil for it to start

@user-jv3fd1zf1w 8 ай бұрын

Otros vídeos remueven el chip. Hay dos maneras de hacer AKL?

@JVFIXLLC 8 ай бұрын

si hay 2 maneras la mas segura es remover el chip

@rodrigoperez2720 Жыл бұрын

Muchas gracias por el video. si tienes una llave lo puedes hacer por obd?

@JVFIXLLC Жыл бұрын

si si tiene una llave que Abra es mas facil por obd2

@ccerwin Жыл бұрын

You don’t have to flash the eprom when adding a additional key. Only if you have all keys lost is that correct??

@JVFIXLLC Жыл бұрын

yes you are correct

@segounlocks5029 28 күн бұрын

No you have to do what he did. Unless its already been motified prior if so you can add key.

@jamescc2010 Жыл бұрын

Why did you modify data file - so you can add a new key? I missed it - how did you save modified data before writing? I agreed with other I got lost but got some basic ideas. What ODB connection cable/device did you use for direct connection? When did you have to disconnect and connect car battery? Please make some more vides that we can follow easily. Thx

@JVFIXLLC Жыл бұрын

@dashtyATG Жыл бұрын

@@JVFIXLLCI noted coz there was 3 used key on the system.

@rodrigoperez2720 Жыл бұрын

great video thank you

@JVFIXLLC Жыл бұрын

thanks for watching.

@DavidPetrisor Жыл бұрын

i am also lost why he read eeprom and then wrote it back it looked like all the bmw ive done so far with the IM608 just read password then add key so not sure why he did that but soon ive be doing one of these and ill find out then

@JVFIXLLC Жыл бұрын

@elviscarey5270 Жыл бұрын

excellent video very detail thanks for sharing

@JVFIXLLC Жыл бұрын

thanks for watching

@CeeeRock1 9 ай бұрын

Please can I do this with Launch x431 pad 7 with xprog3?

@JVFIXLLC 8 ай бұрын

yea I think with xprog3 u van do it.

@user-Alhassany Жыл бұрын

How long did the whole process take and where are you buying these keys from? Thanks

@JVFIXLLC Жыл бұрын

the whole process takes like 20min if all keys lost and about 10min to add a key. the key I bought it on ebay for 20 dollars.

@user-Alhassany Жыл бұрын

@@JVFIXLLC appreciate your kindness

@johnholding107 Жыл бұрын

@@JVFIXLLC if all keys lost do you read the isn from dme?

@car-key-programming Жыл бұрын

@@johnholding107 yes you do need isn.

@user-sr8ir5pn7t Жыл бұрын

@@car-key-programming how to know when ite safe obdm ans when is not ?

@vicogaming5357 Жыл бұрын

So you dont even need to read eeprom on bench anyway to add a key its just needed if they keys are lost . For some reason you backup twice the same file to do the same procedure by obd2.😊

@JVFIXLLC Жыл бұрын

if it is all keys lost you need to read it but if you only add with this tool you can do it by obd2.

@rajushaikh9045 11 ай бұрын

I was confused, thank you sir ☺️♥️

@uKeyMe Жыл бұрын

Hey bro I need some help, can I pay u for some info. I’m Stuck on the part of the video that got cut off

@JVFIXLLC Жыл бұрын

sorry about the confusion in the video I had a part on the video that I cut by accident. you can program the fob just using the USB and obd2 port and u will need the xp400 to generate the dealer key on a blank key.

@jonyovanno4145 7 ай бұрын

What did you modify in the eeprom data???

@JVFIXLLC 7 ай бұрын

the scanner did it by itself I think it does something to the flash data not the actual eeprom memory, this process is for all keys lost but if u want to add a key it can be done by obd2

@user-nu5nl3ob6h 5 ай бұрын

شرح في المستوى

@monteriano1966 Жыл бұрын

Hi JVFIX..... I follow your video and everything went fine to the point of rewriting the original file... then adding the original key and the new key... but after that vehicle will not start and g=aive a bunch of codes on fem module,,, I noticed on your video fem module shows 15 codes/// I tried rewriting the original and the backup file.. now I get (Failed to get version information restore EEPROM data and retry)... any idea how can I reprogram the FEM to his original state... appears that my files got corrupted some how, any input is appreciated... Thanks. my vehicle is a 2017 BMW 330e. FEM module is identical.

@JVFIXLLC Жыл бұрын

if u have the valid subscription just go to main menu and hit programming and do a programming on the fem module and it will code it too.

@AlpeshPrajapat1982 Жыл бұрын

All key lost scenario working video must make

@JVFIXLLC Жыл бұрын

as soon as I get to work on one I'll make a video. this one was kinda of a rush because the customer wanted the car that day.

@Divinemindset04 7 ай бұрын

Uhmm i thought to add key only you just had to clone fast and easy by obd

@JVFIXLLC 7 ай бұрын

yea that's another way to do it too.

@yaboi5686 4 ай бұрын

Is this process same for mini cooper

@JVFIXLLC 4 ай бұрын

mini cooper is more easy. just plug obd2 and good to go

@yaboi5686 4 ай бұрын

@@JVFIXLLC hmmm really ? Because the one I did said it couldn’t do it and it was DBC too ?!?

@yaboi5686 4 ай бұрын

But it was AKL too

@PavLockLocksmith Жыл бұрын

do you have video with akl?

@JVFIXLLC Жыл бұрын

no i don not, what car are u trying to read?

@mehdibechari9444 Жыл бұрын

Hello . Do you unplug the battery cars wires? Before you take off immobilizer from the car and after when returning immo box to the car if there is any changes on the firt key or on car systemes or something else

@JVFIXLLC Жыл бұрын

no need to unplug the battery just make sure the switch is off and u can remove the immo box.

@jordanammanshmesani Жыл бұрын

W Best video out there

@JVFIXLLC Жыл бұрын

thanks a lot. and thank you for watching

@alberts7061 Жыл бұрын

The clamp that comes with Autel never worked. Don’t blame the device for not reading the eeprom. I used another clamp that I used with carprog or other devices and Autel was able to read the eeprom.

@JVFIXLLC Жыл бұрын

yea I actually resolved that issue with the autel clamp by pulling the pins a bit out of the connector I was also having issues trying to read eeproms too.

@DFWAuto_Hack Жыл бұрын

Im surprised carprog eeprom clamp worked. I am suffereing with autel clamp

@mitchellnundlall3729 Жыл бұрын

How do you get to read eeprom I tried doesn't read

@JVFIXLLC Жыл бұрын

your clamp might probably not making good contact I had a similar issue too.

@vahasimon7022 11 ай бұрын

la pince autel ne fait pas une bonne lecture, pour faire une bonne lecture le mieux est de déssoudé l'eeprom @@JVFIXLLC

@CarCareSpotted 10 ай бұрын

Can you help how can write in dme

@JVFIXLLC 9 ай бұрын

that pocedure is abit more complicated, u wanna install a used ecu or program just keys

@OscarHernandez-rj1dl Жыл бұрын

Why do all these videos don't explain why they're taking it off or what they're doing to put it back on

@JVFIXLLC Жыл бұрын

if you have any questions or got confused with some thing let me know i could help you.

@myvideos853 Жыл бұрын

Is it support im 508?

@JVFIXLLC Жыл бұрын

if you have the xp400 reader you will be able to do it

@myvideos853 Жыл бұрын

Ok thanks

@partoems9376 Жыл бұрын

Great video. Just that autel procedure is too long.

@JVFIXLLC Жыл бұрын

yea u right I have seen this process go faster with other tools

@partoems9376 Ай бұрын

@@JVFIXLLC this is just add key. AKL will take you hours with autel including soldering and desoldering the eprom.

@ucsparts Жыл бұрын

Your video is very confusing, didn’t explain/ show properly.

@JVFIXLLC Жыл бұрын

sorry about that 😞