Franklin Armory AR15 binary trigger complete reassembly trick

Franklin Armory AR15 binary trigger complete reassembly trick - no tools needed

Рет қаралды 73,820

2 жыл бұрын

This will show you how to put the trigger back together without pulling out your hair or launching anything across the room. Please understand I may have the official names for some of the components incorrect.

Пікірлер: 65

@Frankie5Angels150 10 ай бұрын

I really appreciate how you leave in the “oops” and then show us how to recover from it without editing tricks to make it look perfect! It shows us how even a non expert can do it.

@smithn.wesson495 9 ай бұрын

This is one of the best reassembly videos for the Franklin Armory trigger anywhere on the internet. As an owner of this binary trigger, I can assure you that trying to get that tiny IDS spring back in during assembly and having the master slave pin go in just right to hold the disconnector and IDS together at the same time is an absolute bitch from Hell if you are not doing it the exact right way. Download and save this video as everyone who owns the Franklin Armory trigger will need it at some point.

@BrianMoore-p5o 25 күн бұрын

I have 10 thumbs and have difficulty with small pieces. I put a piece if scotch tape on one side to hold the idea spring in leaving enough room for the slave pin. Worked for me. Great video by the way.

@einzelganger9970 7 ай бұрын

Excellent video! Clear and to the point. Not sure I ever could have ever reassembled mine without your help. Thank You!

@4237650 6 ай бұрын

*****TIP: I figured out that applying just a little gun grease (ex. EWG Slip 2000) to the part (2nd disconector) that held the IDS spring kept it firmly in place and made installation much easier so spring would not just keep falling out***** thanks for video make it easy to do.

@reyvinarms1420 6 ай бұрын

That's a great idea, thanks for sharing!

@newblackgta 2 жыл бұрын

Thank You for showing us how to put it back together. My trigger came apart during installation and your video saved the day for me.

@michaellane1661 Жыл бұрын

Thank you! You saved me as well! I had that idea spring installed vertically at the front in the “deepest groove” of the right disconnector. Thank goodness you posted this video! I appreciate it sir! 🤘🏽🤘🏽🍻🇺🇸🤘🏽🤘🏽

@tsafa 2 жыл бұрын

Thank you. I didn't know where that little spring was supposed to go

@zachstone8526 Жыл бұрын

Didn't need to reinstall one just needed a sort of understanding on how it works , hopefully I can try to replicate it myself. Thank you for the video!

@Gator412pgh 2 жыл бұрын

love the video the paper instructions that came with the bfs3 was damn near impossiable to see the pics so thanks clearing things uo

@ScizzyGibbler Жыл бұрын

Seriously, for the price they should send you a high resolution photo color guide, what a joke!

@Blahman240 Жыл бұрын

Thank you for the guide, but I'm just going to continue to never let my trigger come apart.

@roberthunden1757 Жыл бұрын

You just saved me so much frustration. Wish I could buy you a beer! Thank you.

@ScizzyGibbler Жыл бұрын

Thank you for this! Helped me out with that little spring. Popped out on me during the installation, lmao

@blakewilliams5165 2 жыл бұрын

Great video, huge help!

@dwreck96 17 күн бұрын

Thanks for the detailed video.

@joshfernandez6892 Жыл бұрын

Super helpful video. Thank you so much

@shawnfarrell5380 Жыл бұрын

I have to say thank-you also....saved me having to go to a gunsmith

@sw640 Жыл бұрын

This video saved me thank You !!!

@liljohn309 Жыл бұрын

Great video just needs a little bit more light so we can actually see a little bit better

@Subhuman828 3 ай бұрын

Lifesaver, thanks man!

@platanoman8913 4 ай бұрын

Watching this video made me realize that i lost the slave pin, yikes, thank you!!!!

@treverlawrence5183 Жыл бұрын

Thank you very much I appreciate it Great video

@tacticaloutdoors7553 Жыл бұрын

Any input on whyy trigger when in binary selection only runs just as it does in semi??????

@phatphingers9788 Жыл бұрын

LMAO 🤣 somehow I just knew my dumb ass was going to need this video as soon as started lookin at the install. I was right, so thank you!

@barrybell100 10 ай бұрын

Great video. Thanks

@lsx6.279 3 ай бұрын

Can I swap out the safety Selector nobs for different ones

@hoganlarvey 6 ай бұрын

Thank you SO MUCH

@yayyo24 4 ай бұрын

Life saver bro

@rampage_45 3 ай бұрын

Question. If you have a binary trigger and want to change the safety selector, will it render the binary application useless??

@rafaellugo5747 Жыл бұрын

Where can I order the trigger?

@AlexMurray-lh7wn 5 ай бұрын

Hello sir, I had a quick question regarding your other video on the installation of the Franklin Armory binary trigger group to your zastava M70. I wanted to ask your vertical foregrip is amazing of that rifle. Where did you source it? If I may ask. Thank you for your content and appreciate your time sir.

@reyvinarms1420 5 ай бұрын

It was designed and 3d printed by a friend. I will see about getting the file posted somewhere. Thanks for the comment.

@israelsolis6426 10 ай бұрын

Great video does it work on the Ruger 556 MPR?

@reyvinarms1420 10 ай бұрын

Since I do not own the Ruger I cannot give 100% certainty. From the research I have done, the Ruger has a small pin configuration like most AR15s out there. I am 99% sure it will work fine.

@TheATFcanSuckmyDicc 8 ай бұрын

Are these triggers comparable for any AR15?? I have a set delta and im thinking about getting one

@reyvinarms1420 8 ай бұрын

They make binary triggers for a few different makes/models if firearms. This particular one is for ar15 variants.

@TheATFcanSuckmyDicc 7 ай бұрын

@@reyvinarms1420 yes I’m aware it’s for ar15 variants, on their site it said “fits most models” and I was curious if anyone knew if there was a way I could confirm it would fit mine. Btw great video, I subscribed.

@BigMC422 7 ай бұрын

Anyone know where I can get a replacement e-clip? One of mine must have fell off somehow.

@gq7654 27 күн бұрын

Have you figured out where to get e clips? Mine fell out too!

@BigMC422 27 күн бұрын

@@gq7654 nope

@kojinus Жыл бұрын

thank you so hard

@mail-qh2qc 5 ай бұрын

What is the "idea spring" called on the Franklin Armory store. It's bent and useless now.

@reyvinarms1420 5 ай бұрын

This has what you are looking for. franklinarmory.com/shop/binary-triggers/bfsiii-parts/bfsiii-sticker-ids-springs-and-slave-pin-package/

@NeckbeardActual 6 ай бұрын

I love you.

@Rambo30522 7 ай бұрын

Does it come ready to install from the package ?or do we need to assemble it ?

@reyvinarms1420 7 ай бұрын

It comes ready to install with the slave pin in place. If you take it apart, this video will help get it back together.

@Rambo30522 7 ай бұрын

@@reyvinarms1420 Thx 4 feedback

@bornnaked424 2 ай бұрын

Thank you for that 😮‍💨😂

@jayvetaw219 Жыл бұрын

do i take the eclip pen out when i actually install the trigger??

@reyvinarms1420 Жыл бұрын

No, the only pin that get removed is the slave pin when it is pushed out of the receiver by the trigger pin.

@jayvetaw219 Жыл бұрын

@@reyvinarms1420 okay thanks!!

@jimverw5863 Жыл бұрын

It would be better to have a longer slave pin.

@jonathassousa4623 Жыл бұрын

👍

@G.M.N_tactical Жыл бұрын

You need to re do this 🤦🏽

@reyvinarms1420 Жыл бұрын

What about it would you like to see different?

@gettoclickin1376 Жыл бұрын

@@reyvinarms1420 like can you put it into the gun step bye step pls I don’t understand how we supposed to do this if your only showing lil parts not the the full thing 🥹

@user-qx5se7hj2x 11 ай бұрын

Can’t see sht

@xxc-strokesxx6247 2 жыл бұрын

0:47 “no tools required” why?!? Why do you lie #Clickbait

@reyvinarms1420 2 жыл бұрын

Please read the title. "No tools needed" for REASSEMBLY. Removal of the E-clip is a disassembly operation LOL

@xxc-strokesxx6247 2 жыл бұрын

I was just being goofy! Looking to get a binary trigger for my Voodoo but I was very curious on how they operate compared to a semi auto trigger! Video was very helpful in understanding that process!

@reyvinarms1420 2 жыл бұрын

@@xxc-strokesxx6247 I was being goofy as well. They run really well provided you get the timing down. If you just pull and release as fast as you can, you will outpace the bolt carrier and get a failure to fire. Then you have to cycle the action and start again. If you get into a nice rhythm, you can RIP through a mag in no time.