I have been waiting for a vid like this im making an mandalorian and iron man helmet
@g-ready18872 жыл бұрын
Same im doing a death trooper helmet for my son and I'm almost done about 2 prints left out of 14 parts , love watching these videos
@AllTheBestVideos2 жыл бұрын
Cool! Are you gonna make a video about it? I’ll watch it!
@kingkiller_33332 жыл бұрын
I hope it comes out good
@KornPlaysGames2 жыл бұрын
Your lucky you have the courage to start this
@radish6691 Жыл бұрын
@@KornPlaysGamesIt’s not about the courage to start, it’s about having the courage to deal with the unexpected. Nothing ever goes as planned.
@The1Goby2 жыл бұрын
THANK YOU! I'm extremely new to the hobby and I was struggling to find a proper tutorial for printing helmets on my Prusa Mini
@FranklyBuilt2 жыл бұрын
Glad I could help!
@cosmos78762 жыл бұрын
@@FranklyBuilt hi
@matthewcurtis5531 Жыл бұрын
I just started this Hobby with an Ender 3 Pro and thought I was limited to my prints; thank you for these videos and guides on using smaller printers, as I just printed my first Halo ODST helmet thanks to you. Please keep up these great videos for novices like me.
@MikeJones-qc1ju10 ай бұрын
Hey, did you find a free ODST helmet file, or did you pay for one? either way can you point me in the right direction?
@stormhought5 ай бұрын
@@MikeJones-qc1juThe 405 forum should have everything you need
@MrGanomedeАй бұрын
Thank you for being calm and uplifting in teaching this craft. It helps for when my children get nervous and have questions!
@brianmccurdy8246 Жыл бұрын
THIS MAKES ME SO HAPPY! I got a small 3d printer for christmas and was worried it was too small to print mandalorian armor, and now I'm gonna learn how with my small printer! Mainly using this video. I definitely subscribed to your channel!
@insaneturbo2 жыл бұрын
Big thanks to you for doing these videos, got my Ender 3 one week ago with intent on rebuilding my Predator costume with NO fiberglass, way to heavy. Your to the point, no bullship approach to teaching is perfect, thanks again!!
@SkunkLifeMedia2 жыл бұрын
Exactly the kind of video I needed to see. Getting into 3d printing for a few reasons, but one of the larger reasons was printing the helmet/cowl and some other pieces for the main character of a super hero series I am working on. Had been wondering how I was going to print it if I didn't have a super large, super expensive printer. Nice to know I can easily break it up. Now the hard part of picking my first printer....
@Hellooooo3782 жыл бұрын
Get an ender 3 v2
@SkunkLifeMedia2 жыл бұрын
@@Hellooooo378just got one to have a 2nd printer
@Hellooooo3782 жыл бұрын
@@SkunkLifeMedia nice
@twotruckslyrics2 ай бұрын
im late but anyone recent reading this thread check in witth your local libraries to see if they have an available 3d printer 😊
@Grillbysans24810 ай бұрын
THANK YOU! YOU SAVED ME 24 HOURS OF TESTING RINCE AND REPEAT!
@devinne75352 жыл бұрын
I'm alreaady a 3D-printing veteran, still had fun watching this. Keep up the great work!!!
@gunplajrtoysreviewer2 жыл бұрын
I just got my first 3d print- Ender 3. This video is amazing and just hit the point where I'm looking for.. Thanks bro 😊
@That_Stinger_GT5 Жыл бұрын
Bro I just want to say, seeing what you've accomplished, I'm excited to see how my journey will be, I ordered an Ender 3 pro with everything already upgraded, just got my filament today, can't wait to learn this new hobby and make my own 3D projects come to life.
@kaylaambriana11012 жыл бұрын
Love the blooper reel at the end 🤣
@georgefernandez25662 жыл бұрын
This was great, I already when through learning this but the other videos weren't as clear and concise.
@FranklyBuilt2 жыл бұрын
Glad it was helpful and thank you for the feedback!
@RiotTrail Жыл бұрын
I constantly come back to this video just to refresh my knowledge on how meshmixer functions
@cl63222 жыл бұрын
Just got a 3d printer a couple of weeks ago and was inspired by your videos to start working on an Ironman Mk 3 helmet on my Mega Zero 2. Couple of large pieces left to go that I was thinking about cutting up into smaller parts to avoid the 12 or so hour build times all at once. Going to have to get that Mesh mixer tonight and start cutting. IF I manage to not mess up too badly on the sanding and painting and such, next project will need to be some Halo helmet for my son. At least that one will be scaled a fair bit smaller so hopefully less work on the cutting to fit the printer. I have a feeling the house is going to be chock full of various helmets, armor, and accessories in the coming years. I think I'm going to need more printers lol
@fakermakerprops39482 жыл бұрын
Awesome video! Quick tip though, on cura, use the mirror tool. On a symmetrical helmet like Samus, you only have to export 1 half, saving room on your computer, and if you have one piece positioned great, you can just duplicate and mirror it, so you don't have to try and copy the positioning.
@FranklyBuilt2 жыл бұрын
Good tip!
@kraalwig2 жыл бұрын
i have been wanting to ask you this on tiktok on just about all your videos.... you are a blessing to this community
@K4k1__12 күн бұрын
Finally, i'll be able to print my 1:1 galactus cosplay
@kenisthistoo74992 жыл бұрын
GREAT VIDEO BRO! PLA welding next level!
@thegrimone13182 жыл бұрын
Dude thank you found your channel like 2 weeks before getting my printer and just did my first cos play item for my gf so your guides and tips helped out alot
@FranklyBuilt2 жыл бұрын
That is awesome! Happy to hear it!
@ssdaniel1872 жыл бұрын
Great job as always brother!!! I learn something new everytime
@studiohubstudiosofficialst67574 ай бұрын
This video is getting me through to my next printer. In the meantime I'll be doing spider man, Mando, Kylo Ren, Vader, iron man and a bunch more
@mikemccabe27582 жыл бұрын
Thank you for making this video, I just bought a Ender 3 Pro. I also bought the Classic Ironman file from Do3D. I think I can now get the helmet on my Ender.
@FranklyBuilt2 жыл бұрын
Glad I could help!
@doomslayer18792 жыл бұрын
Awesome work very clever on the slices
@connorkeefe2 жыл бұрын
Been wanting to do a barbuta knight helmet for a while now and this all helped out a lot!
@FranklyBuilt2 жыл бұрын
Glad I could help! Good luck with your build!
@calebchandler87672 жыл бұрын
I love the fact you have so many printers now you can use them as props for intros haha
@vladtheladjw41422 жыл бұрын
Yeah his creations are amazing
@B1GG339 ай бұрын
I am doing a cosplay for megacon, and i am already getting a 3d printer(elegoo saturn 12k) for other reasons, so this video really helped.
@walmartdoomguy11312 жыл бұрын
I dont even know how to thank you for this tutorial!
@jackybones58872 жыл бұрын
That was one high quality camera! And great mic too!
@FranklyBuilt2 жыл бұрын
Thank you for the feedback!
@alexrobles77442 жыл бұрын
Thanks so much, thanks for the content and the tutorials. You are the creator that got me to buy my ender 3 pro and start learning it. I was just wondering how to weld two pieces (for an arcade coin door) and there is your video.. Thanks so much.
@Mike0405H2 жыл бұрын
Great video, easy to follow I understand the ways to weld / melt it all back together. But Are there any ways to reinforce or strengthen the print? Like maybe fiberglass, or some kind of spray / resin?
@rockinHurley7772 жыл бұрын
Yes.
@Mike0405H2 жыл бұрын
@@rockinHurley777 thank you, is that yes to there being a way? Or yes to the fiber glass being a valid option?
@Tomas9705062 жыл бұрын
@@Mike0405H Both. Some use resin and UV lights. Some use epoxy, other use fiberglass. Really it depends on what u actually want to achieve.
@nottoofast2 жыл бұрын
@@rockinHurley777 wonderful response lol
@rockinHurley7772 жыл бұрын
@@nottoofast short and simple
@jaysvlog98032 жыл бұрын
Dang this guys channels a gold mine
@mattbarachko52982 жыл бұрын
Dude, you are literally one of the best teachers on KZfaq
@FranklyBuilt2 жыл бұрын
Oh what! Thank you so much
@erikarivas888111 ай бұрын
Thank you so much for this! This is exactly what I needed. And you made it easy to follow, thanks.
@Wildforce352 жыл бұрын
Thank You. This Tutorial is easy and i print in next days my mandalorian helmet. ^^
@AngeloHenriquesygma62 жыл бұрын
Thanks a lot Dud.
@billykoscielny98262 жыл бұрын
Great video, answered all the questions I was just beginning to search for, thank you.
@GriMM00712 жыл бұрын
thank you I had no idea how to do this and I love helmets.
@joeribeiro28392 жыл бұрын
You should make a glowing green lantern ring and lantern, also a working omnitrix. Nobody's done those for some reason and as far as I can tell they are very simple to do but awesome
@Shad0w_Z2 жыл бұрын
Well a working omnitrix is, well, rather hard to make as I don’t think we have access to technology that changes a human into an alien at will then can transform them back.
@SymphonicKnight2 жыл бұрын
Thank you so very much for taking the time and helping explain this in detail. And your prints are absolutely epic!
@Merc-ws9zh8 ай бұрын
just figured this so I can print a fill size Darth Revan Helmet, Thanks for the advice keep up the good work.😁👍
@roycertr51672 жыл бұрын
He is so well articulated and awesome at explaining stuff I saved so many videos of his to a Playlist!
@FranklyBuilt2 жыл бұрын
Thank you!!
@rose_d_mary2 жыл бұрын
I appreciate all of these videos, I'm trying to print armor with an ender 3 pro and, while it's been somewhat of a nightmare to troubleshoot sometimes, I feel like I can do it now!
@lynn8313 Жыл бұрын
Hi! I’m brand new to 3d printing and I’m debating which size printer to get (im between an ender or cr10) and I know that a lot of what I wanna print is larger pieces like helmets and armour stuff, so I’m wondering, if you could go back and redo it, would you still get a smaller printer or would you get a bigger one? I’m drawn to the ender because it seems like it’ll teach me a lot and the less space taken up the better but at the same time I’m worried the learning curve is too steep
@rose_d_mary Жыл бұрын
@@lynn8313 learning curve is not bad at all, it’s quite simple. this 3D printer has taught me a lot about how printers work and how to maintain them and that’s important. above all, the important thing is practicing fusing stuff! if u put the time in sanding, fusing, etc, you’ll get much better products even with a small printer. you’re probably gonna have to fuse anyway even if you get a bigger printer
@ulfhugud2 жыл бұрын
Great, cuz I only have an Ender 3 and needed to print that glorious mk 5 helmet boxandloop just released
@davidfriedlander9868 Жыл бұрын
Thank you very much. You’re videos are amazing and so helpful.
@dustfoxyt2 жыл бұрын
Hey, thank you for this video! I just got my first ender 3 and was excited to get into printing, but was bummed because I thought it would be too small to really make some cool builds like this. Thank you for showing me what it can do, and inspiring me with a goal to get to!
@matthewchartrand5442 жыл бұрын
Im sure you get it alot but thank you for these videos. Extremely helpful to noobs like me. Seriously, thank you!
@piehi39622 жыл бұрын
How is he not famous yet he's better than KZfaqrs with 1mil
@And1ewww2 жыл бұрын
My printer is a 10cm by 10cm :/
@YTEnderLIVE3 ай бұрын
I can’t even count that high
@Mr_leen4462 ай бұрын
Mine is By
@hal-o-studios12 ай бұрын
Average size
@GhostyCanGame2 ай бұрын
How
@Mr_leen4462 ай бұрын
@@GhostyCanGameyou missed the joke bro
@jacobg1796Ай бұрын
awesome video man
@douglassanchez59022 жыл бұрын
Amazing tutorial! You just saved me from a major headache. Can’t wait to see your next one!
@Tony-ww4dn2 жыл бұрын
Thank you you've been a great help
@jdmchinoteg21168 ай бұрын
I love you! Great tutorial
@FTKJoskontjes3013 ай бұрын
Would you add connectors when splitting them?
@Valintone2 жыл бұрын
Exactly what I needed. Thank you so much.
@Purfunxion2 жыл бұрын
I never thought about using a soldering iron. I'm working on a Mandalorian Helmet and I might do this instead of using Epoxy and risk it sliding.
@MrSakata652 жыл бұрын
Thanks for this ☺️ I only just got my printer and have been trying to configure it for a helmet file I have 😁🙌
@pacificrimstation77392 жыл бұрын
This helped me a lot
@damomo132 жыл бұрын
I would love to see you do this with a Monoprice Select mini
@nottoofast2 жыл бұрын
Lol, that Cartman "I do what I want" was golden xD
@thekermitshowonbudget66302 жыл бұрын
Are you gonna do a garage check up soon
@tay802hall2 жыл бұрын
Just printed an Ironman helmet on my Adventurer 3 and going to do try and weld it together! Great tips and how to!
@FranklyBuilt2 жыл бұрын
Awesome! I have a video linked in the description box that goes more in-depth into how I PLA weld. Hope it helps!
@maazahmed90102 жыл бұрын
Greetings , Sir Frank. I hope you're doing alright. Can you kindly make a playlist on How to 3D Print and what are the essentials of 3D printing and what are the softwares? Thank you for Reading.😀
@FranklyBuilt2 жыл бұрын
I have a playlist literally for that already haha
@maazahmed90102 жыл бұрын
@@FranklyBuilt Oh , I see it now , I really appreciate your reply , Sir Frank. May God Bless you. Aameen!😁
@WEBSTUDIOS2 жыл бұрын
Could you make, say a clone trooper armor on a small 3D printer?
@FranklyBuilt2 жыл бұрын
Yep!
@WEBSTUDIOS2 жыл бұрын
@@FranklyBuilt thanks, I’ve been looking at purchasing a 3D printer for Cosplay purposes, and your channel has really helped guid me.
@DrolthKar2 жыл бұрын
I'd love to see more on that gundam helmet and the potential cosplay to go with it if any. I've seen it in the background of a few videos and its got me excited on a potential build series for it.
@Delta9Church2 жыл бұрын
I found this video with that exact same Samus helmet printing. I cut it up in Ms 3d builder. Worked great. Should have created registration pins or something.
@GSZ282 жыл бұрын
I use microsoft's 3D Builder to do exactly what is shown in the video, and i think it's much more user friendly AND it doesnt leave any remainig glitchy mashes!
@saatwik__99052 жыл бұрын
Please make the full taskmaster suit or even the helmet would do💛 plssss
@jenniferdelgado3670 Жыл бұрын
This was super helpful, you da man👍
@Martin-zd8eb2 жыл бұрын
This Video free me from the chains of limited buildvolume🤣
@woocity8 ай бұрын
Do you have a video how to add/edit helmets? Like if i want to remove something to add something different.
@Silversurferthereal1210 күн бұрын
hello, i just wanted to ask what 3d printer do you use, and how much does it cost?
@scoringgalaxy842 жыл бұрын
I love your videos they help me out so much I can't thank you enough man
@joelsimon10002 жыл бұрын
Great helpful video! Loving the editing on the videos keep it up!
@FranklyBuilt2 жыл бұрын
That’s mah wife
@joelsimon10002 жыл бұрын
@@FranklyBuilt yeah I believe you said that in the last stream, she’s kicking ass man, let her know that for me will ya.
@bigcarlos65552 жыл бұрын
Hey could you help with something. So basically I just got a rotary tool for me to sand things down but I need help with I need protection or not , if so what kind
@calfischer80202 жыл бұрын
Amazing video! super helpful been trying to find something like this for a long time thank you!
@FranklyBuilt2 жыл бұрын
Happy to help! 🙂
@ghostridergaming7318 Жыл бұрын
Video Idea: Can you make a war machine or iron patriot? those are some really cool suits same with the heart breaker too.
@macoyvg2 ай бұрын
Just a quick question. I know orca Slicer allows you to cut models as well. Do mesh mixer give additional / better cutting options?
@SaUs4g32 жыл бұрын
WOW! You are definitely getting better at editing your videos!
@FranklyBuilt2 жыл бұрын
That’s my wife 😅
@SaUs4g32 жыл бұрын
@@FranklyBuilt Great job to her then on that 😂
@kaylaambriana11012 жыл бұрын
🥰
@aaroneclipse5142 жыл бұрын
0:30 Id like to know what helmet that is on the right please. That looks so cool!
@FranklyBuilt2 жыл бұрын
kzfaq.info/get/bejne/Zp92gqmr19DddJs.html 🦇
@sdkv.graphics19 күн бұрын
i don't even have a 3d printer, but thanks for tutorial
@MrKlawUK7 ай бұрын
would you replace this workflow these days with slicer cutting tools and consider the dowel/plug options for helping stick together?
@georgeghabious46232 жыл бұрын
Thank you so much man, this was SO helpful.
@jonathandelgado867128 күн бұрын
Wwooo thanks brother you are the best
@skronosp2 жыл бұрын
Thanks, it was very good information.
@thisislokisshadow2 жыл бұрын
I also use a wood burner to fuse my pieces together
@true_cannon_workshops Жыл бұрын
😂 I figured that welding out on accident
@clementineduskbow36482 жыл бұрын
First? I love your creations ^^
@adscomics2 жыл бұрын
Thanks a ton for this video! I own an Ender 3 and have been wanting to print out Samus's helm for a while now, but just didn't have the space for a big boy printer.
@bugle00752 жыл бұрын
Hey Frank. I was wondering if you had any advice for scaling helmets that are already sliced. I’ve seen videos about using head scans to scale the helmets before, but the files they use show a complete helmet instead of a sliced one.
@zachmhuber2 жыл бұрын
Yeah, I’ve been wondering this as well.
@punktic86532 жыл бұрын
The same way they are scaling the full helmet, cut up or not the pieces will stay the same size. Or cut it up after you have the proper scale.
@fakermakerprops39482 жыл бұрын
Well that depends. If you open mesh mixer, sometimes they will snap into the right place, in which case you can combine the parts to find the best scale, then break them up. If there is a main piece of the helmet, you could scale that piece and then once you find that scale apply that to a smaller piece. For example the red hood helmet, which has the main helmet, then a back plate. Anyway, that's my 2 cents, hope it helped
@zachmhuber2 жыл бұрын
@@fakermakerprops3948 Thanks so much!
@fakermakerprops39482 жыл бұрын
@@zachmhuber no worries hope it helps!
@badiboys86842 жыл бұрын
Mr Frank when would you post the third video of helmot motorization
@SynysterGoose Жыл бұрын
Plastic welding. Smart.
@maxHeadroom325rayxerin2 жыл бұрын
0:47 nice rhino jungle fury helmet
@Jes91192 жыл бұрын
I wonder if this method could be used to cut up Warframe tennogen models to make life sized suits similar to your Iron Man one. The only issue I've been running into when playing with the mesh of those models is they are mostly solid once you separate the shells for the head and torso. I want to make these into ball joint action figures but it would be way more awesome to do up a whole frame as a cosplay.
@jonahtaylor9338 Жыл бұрын
Do you think an easy threed is a good starting printer
@andrewmagee34132 жыл бұрын
Perfectly Frank! 😂
@kaylaambriana11012 жыл бұрын
🤣
@alexandreprado10582 ай бұрын
Its possible print this helmets in a resin 3d printer with this small base?