Free Mini ATV Budget 212 Swap!

Рет қаралды 159,141

5 жыл бұрын

Dumpster fire engine build gets swapped onto a mini atv!
In this video we swap the engine we made out of spare parts onto a free kids atv frame for less than $30 worth of parts we actually had to buy. Putting the predator 212 harbor freight engine onto the mini atv was a pretty easy job, all we needed to do was weld on a go power sports engine mount plate and run a chain. We had to do a slight tune up on the brakes and the steering but after that we had a really fun time ripping it around and trying not to hurt ourselves!
Thank you guys for watching and be sure to subscribe to see the rest of this thing!
*Be sure to check your local laws before driving any non-registered motorized vehicle. Do not attempt these activities at home. All content produced by Build Break Repeat is for entertainment purposes only*
---------MUSIC --------
INTRO SONG: andrewapplepie.bandcamp.com/t...
Music - Lakey Inspired
Blue Boi
/ blue-boi
-----------MERCH------------
MERCHANDISE CUSTOM DESIGNED BY YOURS TRULY
teespring.com/stores/build-br...
------------PARTS--------------
Engine Mount Plate - www.gopowersports.com/predato...
Chain Brake Tool - www.gopowersports.com/deluxe-...
++++GPS- www.gopowersports.com/?...

Пікірлер: 96

@nicholas_scott 5 жыл бұрын

I have a mini ATV. I have an extra 212. I originally put it into a mini-bike, but it was terrifying.

@deetoxinz7252 3 жыл бұрын

The one I'm riding in my video I lost my leg on pretty much....

@scottymac6911 3 жыл бұрын

"It was terrifying" lmfao pretty much sums up most of these swaps!

@bls1989 3 жыл бұрын

@@deetoxinz7252 how?

@toddsmith3110 3 жыл бұрын

I did the same. But governed mine to where I liked it. At seriously around 50 percent lol

@JuanGarcia-hi9gc 3 жыл бұрын

@@markjenko3117 in my case the throttle got stuck and I went 50+ mph and couldn't stop lol I had to jump off and roll out on the ride near cars that was fucking terrible lol I have since used the motor for a xr250 I had laying around

@charlesparson1331 Жыл бұрын

Man I got the same 4 Wheeler for free to! They got the predator engines at harbor freight for 99 bucks. It's meant to be ty for the video man. 👍👍👍

@emmanuelhalagigie5543 3 жыл бұрын

That smoke be looking like Paul walkers nitros on his r34

@naturechanel209 5 жыл бұрын

I need that starter off that old quad motor

@isaacvoeller3208 4 жыл бұрын

Why they are like 25 bucks max off Amazon I burned mine out and had to buy a new one.

@sensisensei5201 2 жыл бұрын

@@isaacvoeller3208 some people like original

@34bartm 5 жыл бұрын

Awesome build. One of the best on KZfaq.

@mingusbreeze 5 жыл бұрын

Thanks, guys, nice build.

@datraktorman69 5 жыл бұрын

Im about to be building one like this for a 9 year old kid. Keeping the stock sprocket and running a torque converter though. It should rip, really with him on it

@sittinlow6787 5 жыл бұрын

Did one of these builds a few years ago. Turned out pretty cool but needed a different sprocket like this one. Aside from that was super fun

@minimotogarage6752 5 жыл бұрын

Cool!i actully have one these,and was thinking of swapping a 212 in it.Thx for sharing this vid!👍

@theamazingdefault972 5 жыл бұрын

Great video

@El_Chompo 5 жыл бұрын

Green and gold paint. Green for the money, gold for the honies.

@samurboi8007 5 жыл бұрын

Thats pretty mint 👌

@ryan14r95 5 жыл бұрын

Sam ur Boi this ain’t 2 vintage 😂

@tommyyoboi2951 5 жыл бұрын

Karts And Cameras 😂😂😂😂

@samsgarage1716 4 жыл бұрын

Great job.Im in the middle of building one my self.

@Jalapenogoesintight 2 жыл бұрын

I'm an old guy and I use mine to run errands around town

@GGaievski 5 жыл бұрын

you guys should make a bigger atv with go kart wheels and a 2 stroke engine, my dream is making one with a rd 350 ypvs engine

@Matthew-wj8cm 5 жыл бұрын

Basicly a homemade Yamaha Banshee😺

@tommyyoboi2951 5 жыл бұрын

Matouš Litera haha yes

@rosstempletonogskater 4 жыл бұрын

Why don’t you make it, and make a video

@patrickhurenkamp3547 5 жыл бұрын

Thats a 110cc engine they run good on a small atv

@bendover5902 3 жыл бұрын

@Trevor Ober there's different models. They're all pretty much the same size but they vary in prices with engine size.

@gavincarroll2553 2 жыл бұрын

I had a 110 put diesel in it blew the transmition clutch something but it doesn't run so I'm going to put a 212 in in it

@steven-sl6zj 5 жыл бұрын

I did that same exact atv build

@chrishilder3543 5 жыл бұрын

Me and some buddies RM85 swapped one of those quads and it is wild

@rustyprojects1545 5 жыл бұрын

Drag quad!

@mcpeake78 5 жыл бұрын

Ive already built one. Very easy build.

@valleycoastlawns 3 жыл бұрын

Awesome

@BSSMALLENGINES 5 жыл бұрын

I been wanting to do that with a taotao 110 that a customer left here with a blown engine.

@Rattus-Norvegicus 5 жыл бұрын

Can you guys try to get bigger tires for this and try to make a mini super-swamper?

@Slane583 5 жыл бұрын

I was thinking on doing a similar idea with my old three-wheeler since NOS parts are hard to find and I don't want to destroy the original engine in it. Of course I'd have to find a way of adding in an engine plate that doesn't involve frame cutting because that's one thing I won't do is cut into it. As for your brand of engine, You should call it a Hondabishi Carnivore. :P

@SubePelayo928 5 ай бұрын

The Chinese quad I have has the sprocket on the opposite side. Any suggestions

@letsplaywithlego3337 5 жыл бұрын

Cool

@marvinmarin9324 3 жыл бұрын

What size of mounting plate you use

@froggersgarage5127 5 жыл бұрын

I was going to do this last week on my channel but my quad frame is smaller

@stevenjohann5435 5 жыл бұрын

looks fun as all hell....... kinda sketch on vertical stability...lol .....are you sure you want to go faster without widening the axles? a lot.....

@rdooski 5 жыл бұрын

With the gearing that little thing has it should be doing backflips. Maybe a better clutch?

@AntimatePcCustom 5 жыл бұрын

remember some ear protection! xD easy to forget. but tinnitus you won't forget. :)

@derbydetailing9614 4 жыл бұрын

I had a 600cc motor with no muffler ringing in my ear for a few months.... dear God I regret that. My ears never stop ringing.

@jamesonstead5154 2 жыл бұрын

in the middle of doing a 90cc swap to predator 212 on small eton quad - going to go with the stock gearbox and torque converter first, see how it rides - the box counts 9:1 when I spin input and output - will the predator crank high enough rpms like the 90cc polaris or do will the quad run slower?? If i do ot like performance, is it worth flipping the drive shaft and fabricating new rear shock placement in order to run the chain straight off the torque converter and forget about the 9:1 gearbox? quick google search saying the polaris 90cc tops out like 12k rpm... predator cant hit that...

@tommyyoboi2951 5 жыл бұрын

4:14 cars and cams reference

@kartssource5467 5 жыл бұрын

Y'all should put it on Kartfab's dyno. That engine might make more or less power than a 212. Who knows?

@IForgotMyOthrPasswrd 2 жыл бұрын

Swag test track

@16driver16 5 жыл бұрын

I managed to do this without replacing the stock rear sprocket, i just used a torque converter($55ebay) and a 8 tooth torque convertor sprocket($8ebay) im super happy with my setup, wish we could get together and see whats better. What size are the tires on yours?

@scottrobinson9666 5 жыл бұрын

Do you have the link for the torque converter and was it a 420 chain?

@16driver16 5 жыл бұрын

@@scottrobinson9666www.ebay.com/itm/Go-Kart-Torque-Converter-Kit-CVT-Clutch-1-Comet-TAV2-30-75-6-Driven-10T-40-41/302596511513?hash=item4674285719:g:xdoAAOSwHGJcNk2a its a #40 sprocket its compatable with 420 chain.

@16driver16 5 жыл бұрын

@@scottrobinson9666 i had to buy the smaller 8 tooth sprocket separately off ebay as well it didnt have enough torque with the 10 tooth they come with to pull wheelies or really steep inclines.

@scottrobinson9666 5 жыл бұрын

@16driver16 thank you for all the info. Just ordered the torque converter for it and gonna order the 8 tooth after this. Off had do you remember what size your rear sprocket is? I had a 34 tooth and put a 42 tooth on.

@16driver16 5 жыл бұрын

@@scottrobinson9666 iirc 35 tooth rear sprocket and 16" tires

@madscientist6869 2 жыл бұрын

How come they Predator engine is so much slower than a China engine but it's bigger ?

@ggzboyz5828 2 жыл бұрын

I build one with a built 212 and tourqe converter it went 50mph and it got unstable and flipped on me

@jif.6821 5 жыл бұрын

Call it Franken-Quad

@Awesomevideos51 5 жыл бұрын

What happened to the rotaryyyyy

@BuildBreakRepeat 5 жыл бұрын

ApexGaming Sunday my dude, sry to keep y’all waiting but I promise it’s gona deliver

@famousboi6580 Ай бұрын

Put a 39 series torque converter on it

@bram1568 5 жыл бұрын

What kind of muzic

@DonovanGoodwin 5 жыл бұрын

Try a yanmar diesel swap?

@davidyarbrough2197 3 жыл бұрын

See the Jesuit sweat shirt. Is that from the dfw area? My dad graduated from there.

@Legittkultch 5 жыл бұрын

I just subbed, you should have more subs. So I gave you A 1 up mushhy lol

@adamdomonski1619 Жыл бұрын

Hey you don't need the jackshaft

@rosstempletonogskater 4 жыл бұрын

Nice, but it’s tiny

@memphisrains1008 2 жыл бұрын

I build kazooma quads all the time and the tao-tao.i get them from £20-£60 max...i restore them and sell them from £250 ^

@spedC00kie 4 жыл бұрын

i’m a broke highschooler i have a 50cc quad same thing no gears nothing and now it ain’t running can i pay y’all u put a 212 into it? u can also take the old engine i’ll pay to ship it out and everything else parts and labor i don’t have the tools or space to do this i work in a little shed with a impact and socket set and some other basic things

@trecedaves3159 5 жыл бұрын

I need parts for a mini 50cc motor anyone have a parts motor? I need a timing gear

@janonymous-uj2vx 4 жыл бұрын

Jesuit! You boys from nola?

@subie_fan8865 5 жыл бұрын

i had one of that type quad whit a 72cc, stole the topend of it to my 50cc masai db, the masai orginaly went 50kmh whitout restrictors, whit the 72cc it went 80kmh(14:48 sprockets), then i put the masai engine whit the 72cc into the atv whit now 14:38 and it probpably would go 90kmh or something like that, whit half trothle it went 60kmh on 4th gear and it was swerving crazy

@steven-sl6zj 5 жыл бұрын

An it had a 70cc stock motor

@AaronFlach 4 жыл бұрын

Your in Florida Tampa area I know that school and I know all the baties like Shane and dd

@bryduhbikeguy 5 жыл бұрын

9:4514:25.Now you're laughing...

@bryduhbikeguy 5 жыл бұрын

You supply us with fun Montages..I thought I'd give you guy's a return..

@seanclay4188 5 жыл бұрын

That’s a 110, 125 engine or like 107 for sure not a 90 it’s a automatic engine that why no gear those thing will suprise you I have a few

@greghines9004 3 жыл бұрын

Aye wssup i hve a couple questions , if you guys can answer them for me . I hve something im trying to mod . Do you guys have any contact information

@noroadneeded8072 3 жыл бұрын

That 110 motor has more power than eny 212 build wheels for days. Don't no what you are doing

@viewfromtheroad2656 5 жыл бұрын

Speaking of Predator 212s.. this is cool! kzfaq.info/get/bejne/eMeVrLmd0LKnpmQ.html Predator 212 in a 5 speed truck!

@captainjerk 2 жыл бұрын

Twerk Monster

@goofygoodpasture8511 5 жыл бұрын

I'm sorry but your sprocket was not at all centered

@Lahemi347 5 жыл бұрын

Sell me that engine

@666puggsy 5 жыл бұрын

lol stealing catchphrase hear kid

@naxxx44 5 жыл бұрын

Lol cars and cameras reference

@lifeofjayden5592 5 жыл бұрын

the back tire is flat thats why the top speed is trash

@jamesdap7608 2 жыл бұрын

That a 212 clone that’s not a Predator stop saying predator