No video
Free Wood & How to Dry It for Woodworking in a Small Shop
Рет қаралды 383,404
Күн бұрынFree wood is a cornerstone of my business model as I couldn't be competitive with a 20-50% cost penalty. Plus using what's available offers lots of diversity and fun experience. It doesn't cost much more than a little knowledge, planning and patience to dry wood even in a small shop.
----------------------------------------------------------
Referenced Videos:
20 Minute Bowl - • Make a $20 Bowl in 20 ...
Make a Kiln - • Make a Small Shop Kiln...
Rough Turning - • Rough'n Life - Rough T...
Shelving - • Design and Build Shelv...
Tree to Bowl - • From a Tree to a Bowl ...
Tree Butchery - • Tree Butchery
Wood and Moisture Relationships - Oregon State University (pdf download) - ir.library.ore...
----------------------------------------------------------
This channel is based on the value for value proposition. We depend upon patrons like you to fund our channel if you recieve value from it. The time away from 'real work' that is our biggest expense. So if you feel these videos and series are of value to you and others please consider shopping and patronizing these sites:
- wortheffort.com
- wortheffort.com...
- / wortheffort_ww
- / wortheffort_sg
- / wortheffort
Non-"Affiliate" Amazon list of recommended stuff - a.co/7lVnTSh
@AronStamnes 5 жыл бұрын
It's amazing to see someone on youtube just wanting to share their knowledge like you. A lot of usefull information in this video, keep up the good work.
@wortheffort 5 жыл бұрын
Thanks
@jesselafleur2728 4 жыл бұрын
I agree
@robertnew4507 4 жыл бұрын
Free training right inside your house instead of having to go to library or buy a video.
@KatieAndAri 2 жыл бұрын
I agree! It’s inspiring!
@ozarked2363 2 сағат бұрын
I went down the local species rabbit hole. I’m a hobbyist knife maker. I use small pieces for scales. I’ve been sealing the ends with duct tape. I write the date and species on the ends. I cut all my stuff to 1 1/8” thickness. That allows me to rip and plane it if needed for scales, or use it for a hidden tang handle. Redbud and wild plum are my favorites, but I ended up with some quartersawn sycamore that is absolutely gorgeous.
@joegee1699 7 ай бұрын
Arborist here 🎉 We take down maple, ash and red oak FREQUENTLY and a bunch of amazing stuff in between. I currently have a few hundred bdft of 12/4 butternut and 8/4 (5' long) walnut slabs drying now, as well as a bunch of hickory, beech, applewood, etc. Find an Arborist. They'll hook you up because we hate to see good wood turned into chips...
@captaincoyote1792 5 жыл бұрын
I have no pretense that I will ever get into this hobby to this extent, but I cannot tell you how much I enjoyed watching your video....and yes, learning something as well. I am a retired federal wildlands manager here in western Massachusetts.....and it never fails to amaze me how much beautiful lumber is felled by power companies, summer windstorms and winter blizzards. And for the most part, it ends up in a wood stove or simply left to rot. Maple, beech, oak, cherry....up to 15, 20, 25 dbh - and more - in some cases. You made a wonderful case of a personal connection to local species, amigo! Bravo-Zulu on a great presentation!
@pierredelecto7069 5 жыл бұрын
Im moving this weekend. A 60 ft redwood fell over in my yard. Im looking at that puppy with longing and regret now lol. Its a baby red, but still bigger than any tree where im going
@wortheffort 5 жыл бұрын
Thanks
@loriocallaghan636 3 жыл бұрын
That was a great video. I’m new to woodturning. I live in a very wooded area and I’m 58 yrs old, I don’t want to wait years for wood to dry before turning bowls. You make it look very easy and have inspired me to keep learning even though covid keeps slowing up my plans. Looking forward to finding more of your videos. Thanks
@totemgordwoodcarving4959 Жыл бұрын
I once contacted the local town office for tree cutting. Every time there was a wind storm I would look in my from yard to see multiple nice logs and large branches of nice wood like apple, cherry, maple, and basswood. They wood always make sure it was the perfect length and weight for me to carry. FREE is beautiful.
@user-rx8bn6xr7k 3 жыл бұрын
God bless you, sir! You share on all world! That's amazing! Thank you so much! We watch your channel from Russia!
@PrinceWesterburg 4 жыл бұрын
Wow, glad I saw this - I live in England and I have a rose tree we cut down 15 years ago and I got it sawn into slabs, I'd completely forgotten about it! Also, I build guitars and hadn't thought about seasoning my own wood - my neighbour can get wood all the time as she's a gardener! You might have just changed my life! :o)
@wortheffort 4 жыл бұрын
Thanks
@nealvaughn2340 5 жыл бұрын
If you don't have 500k followers by the end of the year, I'll cry conspiracy. GREAT content. GREAT presentation. GREAT editing. Keep it up, brother!
@wortheffort 5 жыл бұрын
Thanks, I'll be lucky to break 100k by end of year. Education will never be as popular as demonstration as it's a niche market.
@nealvaughn2340 5 жыл бұрын
@@wortheffort Don't you dare change either. Your education is INVALUABLE in the KZfaq culture and general culture of today. We need more of it!
@trreb1 5 жыл бұрын
@@wortheffort Great video. I just subscribed. This helps me a lot as I have to cut down a maple tree next to my barn and I really want to save some of this wood. My dad planted that tree when I was a kid and it was no more than 3" tall out of the seed. It was injured during a tornado about 7 yrs ago and most of it now needs to come down.
@blakeumthun8128 5 жыл бұрын
@@trreb1 sounds like dad planted your new workbench and coffee table and end tables and dining table.........
@MKRM27 5 жыл бұрын
Neal Vaughn Great presentation? You think. I don’t. It’s pretty average - especially the quality of the sound.
@jimbugs12 3 жыл бұрын
dude, you should be a motivational speaker. no excuses not to indulge our hobby .... great job
@cfuentesjr85 5 жыл бұрын
I used to work for a tree company and just recently in the last year went off on my own. You have no idea how much this video has just helped me. Thank you.
@wortheffort 5 жыл бұрын
Thanks
@mauiharward7897 4 жыл бұрын
I’ve watched a lot of channels, and found some beautiful stuff. But... information is key, and you sir are the man. Thank you. Sincerely!!
@wortheffort 4 жыл бұрын
Thanks
@johnnycorn7225 7 ай бұрын
Def feel like I made the right decision to limit the size of my products to portable and use repeatable templates to maximize efficiency. Love drying my own hardwoods for projects. A few months ago I found some perfectly cut cherry logs chilling on the side of the road and I mean BEAUTIFUL grain and color. They are very close to dry already and won't need long in my garage oven kiln to be ready. Just wrap the cookies in aluminum foil and it makes the moisture seep out to the edge before evaporating and cracks WAY less. Love me some FREE cherry and walnut yes !!!!
@Sebastopolmark 5 жыл бұрын
This is a GREAT video filled with to allow us to dry our own wood. Another thing by doing it yourself you can say I got the wood free AND dried it MYSELF! !! !!!
@wortheffort 5 жыл бұрын
Thanks
@matthewezell1911 5 жыл бұрын
Thank you for this. I've never had someone be able to explain drying wood in this manner. Everyone either wants to go into complex methodology or just says, "let air flow around it and it will be fine." You've answered why in terms I can understand. Thank you.
@wortheffort 5 жыл бұрын
Thanks
@allenwc 5 жыл бұрын
Its absolutely true. Free trees are everywhere, especially after a storm. Landscapers are always taking out "over grown" trees and replacing them with smaller trees. All my neighbours struggle to get rid of fallen trees. Here, we don't have much hardwood, Big Leaf Maple is pretty much it, but we get Fir, Doug Fir, Yew, Iron Wood Bush, Cedar, Pine (even pitch pine) poplar, Aspen, Birch, and smaller fruit trees. All of it free.
@wortheffort 5 жыл бұрын
Mmmmm... maple. Always what you don't have...
@jofloresz 3 жыл бұрын
You are so right I live in San Antonio, Texas and this is the 7th largest city in America and boom tons of trees fall all the time all you need is a small truck or small trailer and put a harbor freight truck crane a small one of course and the harbor freight pull system which looks like a rubber mat with a roller and put that on your trailer and you can grab them all over town, people want them off their yard and the city will only pick them up once a year but they fall down every time the wind blows so keep your eye on Craigslist and just drive around and get off the truck and ask hey you want all that wood? I get free wood all the time and dry it in the back yard or make a barn like i built!
@nitanice 5 жыл бұрын
My passion is growing trees, but I never thought much about what happens after they are cut down. My island was hit with two Cat5 hurricanes, and thousands of mature coconut palm and mahogany trees came down (we were all in tears....) But I've seen a few folks with coconut palm trees drying on their sides on racks. On a nearby island, people were scrambling for the mahogany. Thank you so much for taking the time to explain in such detail what to do to dry wood, how to process it. I appreciate how much work this was to produce. I will look around my broken jungle a bit differently now and not let those precious trees have died in vain!
@wortheffort 5 жыл бұрын
Thanks
@tomcanac850 4 жыл бұрын
man, honestly, your content is way above a lot of other wood-related chanels!! And it looks much more honest than all those bait click titles. You don't over simplify, you explain very well, and you have a lot of stuff to share. Very specific, but very usefull! Thanks for this knowledge sharing, it is very appreciated!
@wortheffort 4 жыл бұрын
Thanks
@2Langdon 2 жыл бұрын
Great stuff. Very useful, covering basic info that often gets skipped or left out, but makes a big difference. Thanks.
@Tufarock 4 жыл бұрын
That refrigerator kiln is genius!
@wortheffort 4 жыл бұрын
Not my idea, pretty common design. You can find a few videos online to make same.
@crackerjack3359 3 жыл бұрын
For single pieces the convection oven in the kitchen works great. Usually 3 times 1 hour sessions sorts it out.
@rorylarkin4669 2 жыл бұрын
This is the best explanation of this topic that I have come across on KZfaq. Thank you!
@Dennis-kj9qx 4 жыл бұрын
Man O Man what I would learn in a week with you ? You are a Artist as well ! So clear and confident ! Then your teaching skills . Top of the hill for me . Its been 45 years since I turned . Lots to learn again. You are making it a lot easier... THANX !
@wortheffort 4 жыл бұрын
You'd learn I spend half of every day making tops. Woodworking is monotonous.
@barryingarland 4 жыл бұрын
Thank-you for taking my knowledge of my hobby up a few notches! I wasn't sure if I had the patience to listen to your video, but I'm glad I did.
@wortheffort 4 жыл бұрын
Thanks
@careylogan8455 5 жыл бұрын
this video could not have come at a better time for me. I was able to pick up a bunch of free hardwood from landscapers that were pruning trees in my area. I actually got an entire pecan tree with a 28 inch trunk!!!! I was worried because I did not know how to dry it properly being a novice to wood turning. AWESOME!!! this is what I like about you...sharing your experiences with amateurs like me.
@wortheffort 5 жыл бұрын
Thanks
@lewisclark5694 5 жыл бұрын
I’m a woodworker.... and I learned a lot watching this video. Thank You, a new subscriber.
@wortheffort 5 жыл бұрын
Thanks
@diyhuntress 5 жыл бұрын
Love learning from other people with small shops too! Thanks for the insight!
@wortheffort 5 жыл бұрын
Thanks
@crackerjax4330 5 жыл бұрын
The desert has lots of trees. I’m high desert and have some of the best junipers like alligator juniper and cedars. We have crap wood like piñon pine too, but it’s great for medicinal teas, fat wood, and sap salves. Everything has a use. I’m just learning about woodworking for a hobby and I’m excited to get started. Thanks for sharing.
@wortheffort 5 жыл бұрын
Get Busy.
@benbirdsill4709 5 жыл бұрын
You always have good info, but I think this might be the best video of yours I've ever seen. A lot of valuable info packed in there. Thanks for teaching us.
@wortheffort 5 жыл бұрын
Thanks
@paramedialab Жыл бұрын
Thank you for the valuable information. I leave in Greece and the most common tree here is olive. It's also one of the most beautiful woods for bowls and stuff.
@131dyana 5 жыл бұрын
I do live in the desert, but we have high winds. Trees get blown down every year. I never thought of going to the blown tree area and asking for the wood. Thank you.
@wortheffort 5 жыл бұрын
free wood is best wood.
@gasmandl 4 жыл бұрын
I have cherry, almond and walnut orchards all around me here in California. Never thought much about it until I bought my lathe. Now I’m a big time wood hound.
@wortheffort 4 жыл бұрын
Lucky bastard.....
@stacyhall4374 4 жыл бұрын
Thanks for being a regular guy. You make this craft approachable and understandable.
@hugiguide1564 2 жыл бұрын
Loved to listen to those infos and you come into very good points about many things. Great thanks for all you put into this video.
@kevingowdy3651 4 жыл бұрын
I have been a carpenter to trade for over 45 years. I remember (with difficulty now) how this was explained when I was a 16yr old apprentice, and your way is so much more entertaining, interesting and inspiring. You need to be a teacher of teachers. Great video.
@wortheffort 4 жыл бұрын
Thanks
@anthonymarker4984 2 жыл бұрын
Super helpful. Thanks! Oh, and now I have an idea of how I'm going to use that small unused greenhouse on the side of my property: drying wood! Also, thanks for embracing the science and making it accessible to us. Knowledge is our friend. :)
@mattparsley4004 4 жыл бұрын
That was a great video. I learned a lot. I am a Utility Forester in Northern Indiana and have access to many different species of wood. I have brought home smaller logs and let them dry in the shed for several years before using them to make bowls or gobblets.With the information you presented in your video, I am going to gather larger pieces and process as you said. Thank you for sharing you knowledge.
@wortheffort 4 жыл бұрын
Thanks and I'm jealous.
@MikePeaceWoodturning 5 жыл бұрын
Thanks for some more great content, Sean! I appreciate how much effort it takes to produce and educational video. Keep it up.
@wortheffort 5 жыл бұрын
Thanks
@cyrilnorrie8450 Жыл бұрын
Your videos are always so informative and your methods are easy and practical. Thanks for sharing your knowledge!
@jefferywest9179 5 жыл бұрын
Just started getting interested in wood turning and your video is the best one I have watched. I have watched hundreds of them. Thank you for sharing
@wortheffort 5 жыл бұрын
Thanks
@joetolar 5 жыл бұрын
Thank you for this times 1000! Hurricane Michael put down so much wood in my area (Southeast Alabama) that it almost made me cry to think what was going to happen to it. There aren't enough portable sawmills around here to even begin to harvest what's on the ground. I have collected red and white oak, magnolia, cedar, pecan, and even a couple of Sycamore trunks. If you live anywhere around us, take a few minutes to go out and collect some blanks. Make stuff out of this wood, don't let it be destroyed. The storm did a lot of damage, don't let it all be a waste!
@wortheffort 5 жыл бұрын
make some money with it.
@pezmoz2835 5 жыл бұрын
I'm just starting on this process of milling my rough timber into boards. Mostly West Australian hard woods from my local area which I make into trinkets for my wife and our friends. I loved your video. You present in a no nonsense way, full of practical details and it feels like you're just sitting across the workshop from me. I'm still a novice and learning the woodworking craft, but thanks and keep sharing your knowledge. Cheers.
@wortheffort 5 жыл бұрын
Thanks
@archiehebron8944 Жыл бұрын
Great advice on how to get materials. I do have some acquaintances that are arbor care specialists. I would encourage folks to check their local codes before they go cleaning up after a storm. You need a license to do that in some places. Fines might cut into your profits and you could lose your haul as well. Good hunting 👍
@mikethompson5966 5 жыл бұрын
most arborists will be happy to share the wood and lighten the load if you stumble accross them. it happens to us pretty often.. im sure if someone was to call or email a few their local arborists with a finished peice to trade they might get some special attention. the company i work for has a yearly client that turns amazing peices. some of them in museums. we try to save him and afew other people some of the better things we come accross but a lot goes to waste unfortunatly. *thanks for the great video subbed*
@wortheffort 5 жыл бұрын
Thanks
@johnfisher437 5 жыл бұрын
We subscribe to the same ethos! It's always nice to find like-minded people with the same passion for natural materials, also a bonus (and a small victory) when one doesn't have to pay the big companies. Small victories are what life is all about. Be safe and take of yourself, and thank you for your contribution.
@wortheffort 5 жыл бұрын
Thanks
@TheSoloAsylum 5 жыл бұрын
A chipper can be heard running a half a mile away. If you hear one, that's free wood the guys will be glad to give you, less work for them.
@patriciusvunkempen102 5 жыл бұрын
when i hear a chipper i start running while tears run down my cheeks XD
@rosehavenfarm2969 4 жыл бұрын
Didn't see your comment before I posted mine. Chipper noise is how we've obtained yards and yards of chips for the garden, and huge logs for planks, blanks, and firewood.
@pr0faker 4 жыл бұрын
In our land you might get away with a bit of branche wood to take, but if the government is processing the wood, its money for them and they won't let you take it. thats in the Netherlands and we don't have much nature left, only a few parks and small forests here and there that are all managed by foresters, privately owned or companies. You might get a free tree if someone in his yard has one fallen over but that rarely happens here, we might have 1 or 2 storms that can do real damage.
@avrumisolaimani8546 4 жыл бұрын
good point
@lyntoncox7880 5 жыл бұрын
Love your kiln! Here in Europe most bulbs are now LED and heat producing filament bulbs are not to be had any more unless you buy special infra red bulbs which are not cheap and too darned hot so with a different solution for heating and a thermostat this kiln would be great in a small shop. I live in Switzerland where almost every tree is owned by somebody who doesn’t want to give it away!😁🙁 so free or cheap wood is very difficult to come by unless you get special permission. The USA is 50 time the population and with trees a plenty that seem not to have that many owners (or at least owners living near enough to hear the chain saw). But your point is really true for wood in general that is scrap from buildings and gardens. Keep up the great work!
@wortheffort 5 жыл бұрын
Thanks
@JEBavido 5 жыл бұрын
"...living near enough to hear the chainsaw" !! OMG, I'm so glad you live far, far away from me! :O There isn't any wood that doesn't have an owner, either private, corporate or government.
4 жыл бұрын
I live in Hawaii and if you pay attention and your patient you'll see a lot of trees being cleared for building. I have a portable crank hoist that locks onto the trailer hitch that I use to lift the heavy trunk sections. Appreciate your video and your direct, no fluff video. You've earned a new subscriber.
@wortheffort 4 жыл бұрын
Dad and I use similar lift device. Works well.
4 жыл бұрын
Paid for itself the first time I used it.
@donataspimpasas 5 жыл бұрын
3 years of drying? I can’t wait so long, I want it now!
@wortheffort 5 жыл бұрын
Millennials....
@blakeb4399 4 жыл бұрын
@@wortheffort ok boomer 😂 where are you located (could have been right in front of my eyes didnt notice) I know some local lumber mills they have any dimensions imaginable and 90% of the wood is local really nice guy will cut logs if i need a big round section to turn!
@blakejohn8374 10 ай бұрын
You’re a legend my friend thankyou for all you’ve taught me
@richardbruce8111 2 жыл бұрын
Thank you sir! I had a 160 year old apple blow down in a storm! Planted by the original pioneer on my farm ,30 foot high 2 foot thick , what a monster but what to do? Got a keen guy from far away to take the main big trunk... zoom ,got it, gone! Hell what do I do with the 2 big trunk lengths left behind? You have brought me up to speed Thanks SO much! Now I can cut & store bowl blanks & some for planks to do boxes ..Hell this tree was historic now thanks to you I shall be able to keep its story in useful artefacts! Thank you from far away New Zealand
@lesgoins5124 3 жыл бұрын
Just came across this, and I’ve missed your channel love all of your vid‘s especially like the one I think your dad was part of it- you’re a lucky guy! Les
@jeffreythree 5 жыл бұрын
Excellent information. The little tidbit of getting a pro chainsaw is spot on after having my old, abused, problem free Stihl 036 Pro while the 42 cc Homelite and little Poulan backup saws I had quit after a year or two.
@wortheffort 5 жыл бұрын
Thanks
@ideaguyinks Жыл бұрын
You really know how to teach, I enjoy all your videos. I hope you're making the money you deserve.👍
@beatsbydrew8930 5 жыл бұрын
Living in Maui, woods like Koa, Monkeypod, and Lychee are never available in the dimensions woodturners need from retailers and if they are, they're very expensive. You'd be surprised at how much of all of those woods I have that I got for great prices that are perfect bowl blank sizes, I just cut a piece of Koa into 4 6-8 inch blanks earlier today. It definitely helps to be involved in your community and what I did was join my local AAW chapter and every time we meet, we bring a few pieces of wood (if you don't have any you want to give, you don't have to) and have a raffle at the end. This helps raise money for the guild and helps new woodworkers like myself get great stock.
@wortheffort 5 жыл бұрын
That's nice stuff.
@ilawoodwyk1417 2 жыл бұрын
Extremely informative and I appreciate your helping save on my tiny budget. You have the best wood channel out here. Thank you!
@elif.9695 3 жыл бұрын
I do all of my turnings and drying in a greenhouse, so it is practically a kiln in there all of the time.
@reloadNshoot Жыл бұрын
I went in feet first, bought a dozer, a tractor with forks, a couple of chain saws, a sawmill and a big vertical bandsaw. I have several hardwoods varieties I fell on the ranch and make all kinds of things out of it.
@benjamingerow5650 2 жыл бұрын
Thanks for making this guide!
@roderickharvey1427 2 жыл бұрын
Thank You for all the Great information. Great job.
@flyingpigforge Жыл бұрын
I use coffee cup desk top warmers in my welding rod fridge. Dang lightbulbs would burn out but the coffee cup warmers have been on for 20+ years. IIRC, they’re 25 W resistance heaters.
@jennyharding6407 2 жыл бұрын
Just found your video and it was so useful. It was a very clear explanation of the hows and whys of wood drying and storage. Thank You.
@markchoitz443 5 жыл бұрын
great advice on this topic, I haven't paid for a piece of wood for 8 years, I have a friend with a sawmill and I will "Work for Wood", we are fortunate to have lots of bigleaf maple here in Oregon. Take Care my friend.
@wortheffort 5 жыл бұрын
Mmmmm... maple. You always want what you don't have.
@gardeningdianne 5 жыл бұрын
Very informative. You gave a lot of good ideas on how to collect and process your own wood instead of spending big money buying it in. Well done.
@wortheffort 5 жыл бұрын
Thanks
@toddharshbarger8616 3 жыл бұрын
Luv it luv it luv it! Soooo practical!
@spiritualkicksrt Жыл бұрын
Really, really GOOD information! Thank you! I shall just leave that one tree down in the back yard. The limbs are holding it up. It is still attached to the tree so that is holding it off the ground. And it is still kind of shady over there. Maybe I will get a paint sprayer, put something under the bottom of the trunk (to keep it off the dirt), cut it loose from the stump and spray paint the cut end.
@petermarsh4993 4 жыл бұрын
Dear Shawn, recycling is such a good idea in principle that I tried it at my local council recycling centre. I said to the guys on the front gate that all I want to do is to pick through the mountainous pile of garden cuttings that people bring in and saw off some logs suitable for drying and turning into some piece of woodworking beauty. No, I couldn’t do that because it was too dangerous was the answer. They instead intermittently feed the mountain of cuttings into the throat of a chipper and make a smaller mountain of wood chips and in six months would happily sell me the “recycled” wood to go on my garden. I tried to explain that wood-chips is not what I want but wood bits. My protests fell on deaf ears, citing the dangers of using a chainsaw. I don’t own one and rarely use one. I cut by handsaw by preference. Occupational Health and Safety has yet again closed off a useful and beneficial avenue and replaced it with a “Safe” boring and diminished output. What a great waste, all those small pieces of potentially beautiful timber, ground into chips.
@timfoster5043 4 жыл бұрын
And there's the threat of lawsuit. Most people would rather stick with StandardOperatingProcedures and avoid a potential lawsuit should someone thinking outside the box get hurt on their property. I tried salvaging some perfectly fine motors from a restaurant remodeler's trash bin, and they wouldn't allow it because I might hurt myself climbing over their mountain of metal.
@petermarsh4993 4 жыл бұрын
Dear Tim, the creeping fear of legal negativities is gradually stripping away so much that was once nice about living. One day the Lawyers will have their way with everything and all parks and gardens will be shut because of the risk of bees and spiders, all beaches permanently closed because of sharks, National parks deemed too dangerous to visit and nobody will be able to use machinery in their workshop because you may hurt yourself and so on. We’ll all have fantastic legal representation but be much the lesser because of it. I think the line of Danni De-vito in “War of the roses” with “What do you call 10,000 lawyers at the bottom of the ocean? A good start” comes to mind.
@larrywiltse6268 5 жыл бұрын
I found your video reassuring. I have been doing exactly what you discussed - even the bit about putting the wood in the attic of my garage. I had two good size cherry trees come down in a wind storm last. I have used a box fan to increase the air flow through the stacked wood.
@wortheffort 5 жыл бұрын
It works.
@richardgarrow9260 5 жыл бұрын
Great ideas that you would not normally think of. Thanks I will admit I wish more folks would grab up the trees that come down in the storms.A group in NYC after Sandy when to the town shires and offer to take as much as they could. They now have at least 10 years of wood to dry sell and use for good quality furniture.. Thanks for all the great info..
@wortheffort 5 жыл бұрын
Good for them. Thanks
@davidanderson5767 8 ай бұрын
I truly enjoy your teaching videos.
@jimgriffiths9071 5 жыл бұрын
Your instincts are right on target. Source locally, create value, keep capital investment to a minimum thru ingenuous innovation (fridge kiln) and maximize margins . You are terrific!
@wortheffort 5 жыл бұрын
Thanks
@aaronconner-dolgner1955 5 жыл бұрын
I watch a few different woodworking channels and this was on my recommendation feed. So glad i watched this. I am just looking to get into woodworking and found your video to be just an excellent source of information. I have subscribed and look forward to more great content.
@wortheffort 5 жыл бұрын
Thanks
@MichaelHartleyBambooStudio 4 жыл бұрын
Enjoy your way of sharing... Thanks
@wortheffort 4 жыл бұрын
Thanks
@Iyzdor 2 жыл бұрын
This video was exactly what I was looking for!
@ericwinckler5142 4 жыл бұрын
I have just finished making my workshop here in Tennessee. Thank you Sean for the different videos to help us beginners. I just got a lathe for my Birthday and even though it will be a while before I can afford the tools I am learning how to do things better when I get to start. Thank you again its been great. Eric
@wortheffort 4 жыл бұрын
Make a mess.
@nathanweese3812 5 жыл бұрын
Another great teaching video, this channel gets better every video I watch.
@wortheffort 5 жыл бұрын
Thanks
@jenskryth 5 жыл бұрын
Great video. I like that you revisited your kiln. Lots of building videos out there, but not many showing it actually works.
@russbowman6801 4 жыл бұрын
In a tiny shop, I got 55 gallon plastic trash cans, drilled a few holes in the bottom (the lids are intentionally venting), and put them out in partial shade on wood blocks, then let the wood dry in my 'kilns'. Like you say, make sure there are no areas of mutual contact between surfaces. Contrasting hotter and cooler air from day to night helps them to breathe, so do not let them get too hot!
@RichardKean_o7 4 жыл бұрын
I make bagpipes here in Texas. Awesome talk about drying wood. You totally schooled me :D I need to start looking for the free wood now!
@wortheffort 4 жыл бұрын
Thanks. Bagpipes... must be hill country.
@hardstylelife5749 Жыл бұрын
Very interesting and useful video, thanks for sharing it.
@MarcHarrisx 4 жыл бұрын
fascinating and informative! i learned more about maintaining wood chunks from you than i'd known even existed
@wortheffort 4 жыл бұрын
Thanks
@geoffcampbell7846 2 жыл бұрын
Cheers, I learnt a lot today. 👍
@rafaelramos1486 2 жыл бұрын
Thanks your videos are great great tips to use
@luisbarrueta8207 4 жыл бұрын
100%... Man... I live in SoCal Redlands, Ca. and there are trees everywhere... some times people just leave half/partial tree trunks on the street curbside hopping for someone to take it...
@flurng 4 жыл бұрын
Thank you, Shaun, for yet another fantastic video! I swear, as soon as I become President of the U-damn-Nited States, I'm putting you in for a Presidential Award for Excellence in the Arts and Education! Each of your videos is a TREASURE trove of invaluable knowledge and practical information in the craft of woodworking! Your dedication to sharing your wisdom and experience with others is truly inspiring, and your Webpage and KZfaq page are priceless resources for those among us pursuing the craft of woodworking! Cheers for now, & keep up the good work!
@wortheffort 4 жыл бұрын
Thanks
@theone614 5 жыл бұрын
Even in Las Vegas we have full grown trees and free wood every week
@richgilb 3 жыл бұрын
You were so excited it made me want to go out and find some trees!
@timcheatwood4550 5 жыл бұрын
Great video Shawn. I really appreciate the way you teach things on your channel. Keep up the great work bud.
@wortheffort 5 жыл бұрын
Thanks
@mcshawnboy 5 жыл бұрын
I have been away from woodworking for a number of years. I am a big gearhead and I cruise the Internet for flippers. I love KZfaq as I can indulge a bit of all of my interests, even without the time & at times the ability for that much time on my feet. If you are young avoid the dangerous occupations and fast vehicles! I still have most of my equipment, but when folks get into substance abuse, no matter how much they tell people, "That wasn't YOUR SAW! I was taking out MY saw. Well I like your plan & video as well as your down to earth ways. I used drive truck with a boy on the farm when we milked Holstein 🐄 back out of H.S. and we still get around a bit. He hauled logs for a broker to a small chair making shop in the Shenandoah Valley of Virginia. They had several hot air kilns & band saws, but the last time I went through the area to say hello they'd folded up! Anyhow for your efforts I have given you the KZfaq Trifecta. A Like, Subscribe and Hit The Bell and I guess will share it with a few people who are still hungry for something to do.
@argentorangeok6224 5 жыл бұрын
Spend about another $50 and you can get an STC-1000 temperature controller rigged to that fridge. It's super easy to set up if you have even a small amount of mechanical/electrical aptitude. I rigged mine to an old fridge for homebrewing and now pickling.
@wortheffort 5 жыл бұрын
Thanks
@williambrecht4501 Жыл бұрын
You're cool dude, I think I'll hang around! I might learn something!!
@OmarAhmad-gm1uc 4 жыл бұрын
You are a great teacher
@wortheffort 4 жыл бұрын
Thanks
@Blackobluna 5 жыл бұрын
You seem to be doing this for the joy of teaching, but I think it would be very beneficial for you to compile and expand on this in a resource book you could sell. It's dead simple information, but it could help a lot of people who might not run across it in this incredibly useful format.
@wortheffort 5 жыл бұрын
Books been in works for years... and will be for years more.
@alexanderdemenev4020 4 жыл бұрын
Hello from the Urals, Russia! This is a great starter guide, thanks a lot! Im only thinking about getting into woodworking, and im not in a hurry, so ill go and grab some free wood to let it dry at my place. Thanks a lot! Best video on topic!
@wortheffort 4 жыл бұрын
Thanks
@benbrubaker7896 5 жыл бұрын
Thanks for another episode of common sense advice I can use in my small shop. Keep turning.
@wortheffort 5 жыл бұрын
Thanks
@samsislewoodworks2489 5 жыл бұрын
Great info and lots of it. I find that a lot of the in-depth information you give is hard to come by elsewhere. This is just invaluable. Thank you very much.
@wortheffort 5 жыл бұрын
Thanks
@wolcottproject9971 5 жыл бұрын
Oh joy, another channel I'm need to binge. :) I'm glad I found your channel, especially this video.
@wortheffort 5 жыл бұрын
Thanks
@wolcottproject9971 5 жыл бұрын
@@wortheffort You're Welcome.
@Mr_Chuckles 2 жыл бұрын
Excellent video, thank you!
@prepperjonpnw6482 5 жыл бұрын
Hey There - love your videos. Always a wealth of knowledge and entertaining at the same time which is awesome. Back around 2007 I saw a short video on a public access station on the television while I was working the Oregon coast. It was two guys cutting down a massive old growth tree up in the mountains of Oregon. When their saw went in about a foot, suddenly a flood of sap started pouring out of it. There must have been at least 100 gallons or more lol. It was quite the sight. Lol
@wortheffort 5 жыл бұрын
Yuk, but it happens.
HeARTwood
Рет қаралды 700 М.
Kerry Corney
Рет қаралды 8 М.