Рет қаралды 540,298
This video has been updated and is available here:
• Making a Simple Glove ...
We leave this earlier version on KZfaq so we don’t lose our overall views/likes (all hail the almighty algorithm), but we encourage you to check out the latest version, which has been updated with additional content, better on-screen graphics, and more.
This is part of our instructional video series for those making Parts, Patterns, Tools, & Molds. Originally available on DVD (remember those?), all of the updated videos are now available on FreemanVideos.com and on this KZfaq Channel.
Finally, Freeman Mfg & Supply is a material supplier. Therefore, the thousands of hours dedicated to producing this series was done in service to our industry. If you are looking for any of the materials shown, please visit us at freemansupply.com (our primary website for professionals) or miapoxy.com (for the DIY market).
Our video library now includes:
Moldmaking & Casting Videos:
1 - Using Rigid Fast-Cast Urethanes for Casting Both Molds & Parts
• Using Rigid Fast-Cast ...
2 - Making Flexible Molds with Urethane Rubber
• Making Flexible Molds ...
3 - Simple Silicone Rubber Molds (Without a Parting Line)
• Simple Silicone Rubber...
4 - Two-Part Silicone Rubber Molds (Forming a Straight Parting Line)
• Two-Part Silicone Rubb...
5 - Moldmaking With Clear Silicone Rubber
• Moldmaking With Clear ...
6 - Making Molds & Casting Thin Walled Parts (& Using Color Tints)
• Making Molds & Casting...
7 - Making Two-Part Silicone Rubber Molds with Complex Parting Lines
tinyurl.com/spf9z8hs
8 - Tips & Tricks for Moldmaking & Casting Parts with Intricate Detail
• Tips & Tricks for Mold...
9 - Making Simple Multi-Cavity Molds
• Making Simple Multi-Ca...
10 - Surface Casting Method #1 (featuring Gap Wax)
• Surface Casting Method...
11 - Surface Casting Method #2 (With Brushable Urethane Casting Resin)
• Surface Casting Method...
12 - Using Fillers & Pourable Foam to Lighten a Casting (& More)
tinyurl.com/2cav5em5
Laminate Toolmaking & Composite Parts Videos:
1 - Laminating with Fiberglass & Epoxy - The Basics
• Laminating with Fiberg...
2 - Building a Fiberglass & Epoxy Laminate Mold
• Building a Fiberglass ...
3 - Vacuum Bagging a Carbon Fiber/Composite Part
tinyurl.com/auf6d2d8
4 - Building a Laminate Tool with Epoxy Paste
• Building a Laminate To...
5 - Rapid Tool Making with the Repro Laminating System
• Rapid Tool Making with...
6 - Making a Simple Glove Mold
• Making a Simple Glove ...
Preparing Models, Molds, & Materials Videos:
1 - Prevent Your Castings & Models From Sticking to Your Molds
• Prevent Your Castings ...
2 - Weighing & Mixing Resins & Silicone Rubber The Right Way
• Weighing & Mixing Resi...
3 - Eliminate Entrapped Air in Molds & Castings
• Eliminate Entrapped Ai...
4 - How NOT to Ruin Silicone Rubber When Making Molds
tinyurl.com/32uwjv3z