Shout out to my local bike shop for giving it their best guess as to how to set up a front derailleur. This video is exactly what I needed to fix the disaster I was sent home with, thank you.

Your "how to" guides are simply superb! Absolute lifesaver

This video is gold, went from 3 hours of frustration to getting it dialed in straight away after this, Bravo!!!

my bike shop didn't even do any of this, have had nothing but issues with my grx front mech, constantly catching, dropping chains, ripping through cables. Thank-you so much.

Just wanted to say a big thank you for your amazing job, old school and you nailed it. Your experience and knowledge are incredible, and I've learned so much from you. Really appreciate you shared this video with us!!!

A year or so later I need this video again, and wow! So thorough! Just perfect! So glad that it is available!

Nice relaxed and informative video. I hate the fact that Shimano has to keep changing and changing, my other bikes are so simple to adjust. Thanks for a great video.

One of the clearest, most complete, understandable how-to fideos I've ever seen. Thank You! You've saved me so much time and angst!

Huge help. Been having loads of trouble with my front derailleur. I didn’t know shifting this smoothly was possible. Thanks for the video! Saving it for when I’ll need to revisit.

Thank you! You have saved my sanity! I'd been following the Shimano fitting guide for this derailleur and could not make it work - 20 mins spent watching your video and it's shifting a treat. Great guide 🙏

I just install my GRX 810 by following this video. Nice clear instructions I watched it a couple of times and then followed several steps in one go. Worth noting that a cable pulling tool really helps getting the cable taught, and the cable pinch bolt needs to be screwed down quite hard, as the cable slipped through after I had installed the change and was tweaking the gears - so I had to restart.

Great video! Thank you for taking the time to make such a helpful and easy to follow guide. There is nothing like seeing someone doing it - and your attention to detail was much appreciated.

Greetings from Germany. After wasting serveral hours with other tutorials, you made my day! Thanks a lot

So many adjustment screws! I like that you can adjust tension on the cable with a screw. Quite easy to install

Thank you! this helped me after I stretched my derailer cable and no shops were open. Got me back on the bike! Only detailed GRX 800 detailed video I could find. Appreciate!

Wow, amazing video! I bought my bike in an official Cube store. The front derailleur was a mess. I took it to a local repair shop and it wasn’t much better. Thanks to your video I could fix all problems myself 🎉

This is very clear step by step video about how to get Shimano GRX front derailleur adjusted, if you have one. My derailleur was adjusted so so, it bothered me a lot and made me hating the gears in the whole. While I had to change cable I decided to adjust derailleur again with this video. Success was quaranteed!

This was so perfect. I stared at the service manual for so long not understanding what all the shift lever positions and such meant. This made it all so simple

Your videos have helped me on so many levels. You probably hear this a lot, but thank you for taking the time to do this.

Saved my sanity!..I've tweaked a lot of FD's in my day but I had fits with this one..Thanks..subbed

It's an awesome video guide, and it helped me to adjust the front derailleur on my bike. I've tried to adjust the front derailleur a few days, but after I've watched this video, the adjustment took only a few minutes! Many thanks!

Thank you! I've been battling for an hour with my GRX front derailleur for an hour. This helped a great deal.

Here's thanks from another (still learning) home-mechanic. Heard a loud snap when shifting from small to big chainring, thought my cable was broken. Shifter and outer cables looked fine which was weird, but no tension on the cable. Seems like cable tension was slowly decreasing the past 2 years, fixed it completely with just this video.

Great video. Thanks! The cable tension adjustment is by far the single best addition to Shimano front mechs. The Ultegra 6800 was an absolute nightmare to get right. Either too much tension or not enough.

Thanks, helpful. These are a little different than the stuff I am used to from 15 years ago.

Your videos allowed me to adjust both my front and rear derailleur. My LBS couldn’t even do it. Thank you!

Absolutely amazing video to teach me how to sort my derailleur from scratch. I’m a total newbie and this video got me sorted. So we’ll explained. A huge thank you!

Super helpful, was having a complete nightmare trying to figure this out. Thanks so much.

Hi this is Mat from Germany...Thank you so much for this video. It helped me to refit my derailleur and saved my weekendride. Your the neighbour I'd like to have!!! Perfect explanation! If you lived near me, I would bring a cold beer straightaway...Kind regards!!!

Hey I just wanted to say thank you very much! I am building my first bike from a frameset and also my very first 2x I was struggling till I found your Video

Very good video, saved me so many troubles from a poorly fitted groupset!

duuuuuuuuuuuude thank you so much for explaining how to install that stupid little cable clip thingy around 8:15... that thing came loose on a ride today and FOR THE LIFE OF ME I could not figure out how it should go back on! Cheers mate, thank you so much!

Videos are great and super helpful. This is my go to channel when I need to adjust derailleurs

Now this was a really fantastic video on how to install and adjust the derailleur! Thank you! I was alreay pretty desperate.

Thank you very much! First time for me working with GRX 810 of my new Grizl. This was really really helpful!

I have been struggling with this for so long. Thank you so much!!!

Well made. I just followed the steps and got out of a mess. Thanks.

You literally saved my life. I love you guys!

Wonderful video! Thanks for helping me fine tune my new bike’s GRX derailleurs.

Thanks. I just got mine installed and adjusted thanks to you and Sick Biker. You guys rock.

Great video very helpful my GRX front derailleur was not setup right after the lbs changed from my fsa to GRX crankset followed your instructions now it's all sorted 👍🏾

Great video! Easy step by step guide to perfection

Thank for for the GRX810 videos! They helped so much!!

Thanks, that was just the ticket. I fitted grx 600 rings to my 810 chainset for a little lower gears and had to drop the front mech a little and reset. I'vr had a lifetime of experience in bike setup with campag, suntour, shimano, simplex, blah blah. This showed me how much I didn't know about modern tech, excellent front mech tensioning, double trim settings which I've only seem on a triple before. So please to have gone with GRX and to have it's modern features so clearly explained by a pro. BTW if anyone contemplates the 600 46/30 rings on an 810 spider the anti chain jam pin on the 600 rings is longer than the 800 as yhe 600 cranks have a hollow inside face. A few seconds with a file shortens it and avoids distorting the big ring against the drive side crank.

Thanks for making life simple ;)

This was consistent with the the Shimano technical document... despite that I couldn't get my new GRX front derailleur to shift. And I have been working on bikes 30 years. Usually Shimano stuff is cake to work on.

Thank you so much for this video, concise and easy to follow. Most importantly each step is spot on.👍👍👍

Been wrestling for a while with a Badly setup GRX FD on a new Giant Revolt. After doing the steps in this video and I think most importantly getting the tension right by lining it up via the tension screw it’s working properly now.

amazingly clear explanation - thanks for this!

THANKS! Purchased a Trek Checkpoint ALR 5 new, front derailleur wouldn't shift up. They "fixed" it when I went in for my fitting. Still wouldn't shift to the big chain ring. Brought it to a different bike shop - same deal. This video and 20 minutes took care of it!

Excellent video. Thanks for posting. Very clear and really helped me sort out some adjustment issues and now all is good.

Very good explaining of the screws and setup. I've been fiddling with my GRX front of the new Grizl. Gonna try your setup method this afternoon.

Lovely clear videos. Still struggle like hell. I’m best with mechs from the 90s without trim. If I installed weekly be fine. It’s once every two years imposs remember process

This video helped me out a lot. Got my Canyon Grail delivered ago and the derailleur setting was horrible.. Managed to get it a lot better thanks to your video! Some problems remain: Being on the large chainring I can't use sprockets 1-5 (1= the largest sprocket) which seems to be wrong? I guess I should at least be able to use the sprockets 3-11 while being on the large chainring.

Your sharp explanation was able to make me understand and sort a factory bike delivered where too much noise and difficulty was coming from the derailleur. But please anyone help! ? My brand new bike with same GRX when I am on disc No 2 front, does not change in the back with gear 1( largest in teeth sprocket or the furthest out).All other combinations are fine! I have tried with H and L before seeing the video and had no luck. All other details are great by following the steps and adjusting. Thank you

Excellent video. My Revolt derailleur was so far out of proper setup.

Excellent video 📸 that is chaulked full of pro level mechanic tips.

Thanks for the help!

Hey you helped me resolve my chain rub issue, thanks!

Thanks mate just doing this, so glad I watched your video

Thank you very much! Nice, practical and very clear.

Thanks! I was wondering why I couldn't get mine to work, great video

Excellent. FWIW I followed this with the GRX 410 front mechanical and it was all the same.

Superb video - very clear. I'm very new to this and yours is the best video I've found! Many thanks from Canada!

amazing video! fixing all my drive train noise

This was great thank you so much

Great video , thank you so much 👍

Thanks for this excellent instructional video

Great instructional video! Thank you for posting! Love my GRX!

Thanks, very helpfull! Actually better than the shimano documentation.

Amazing, thank you!

Excellent instructions! Thank You!

Fantastic video, thank you! Installed and working so perfectly.

Awesome and clear instructions. Thanks for a great vid

I have this on my gravel bike. Quite a lot went into adjustment apparently.

Super helpful. Thank you so much.

Thank you sir! 🙏

Thank you!

Great video!

Fantastic video. Thank you very much!

Thanks for the video. When I got my bike today, the crank arm was hitting the mech and the chain was always clicking against the derailleur

That's really clear. Thank you!

Great help! Cable tension - I seem to be able to have a useful trim at the top, or the bottom, but not both at the same time…

Genius!

Thank you for the video very helpful. The Shimano installation manual is pretty hard to read…

Great video! I’m having a little trouble though, the screw that’s goes through and should push onto the frame... the derailleur is placed in a position so that when the screw goes through there is no frame to push on, it’s just in mid air. This is an issue because I need to straighten the cage because the chain is rubbing the metal side...

This video helped me alot, thank you, awesome channel in general, keep it up!

Thanks

Cheers!

Amazing, keep going! Best regards from Switzerland

Thanks for this!

Great video, thanks!

Thank you! This literally saved me during a ride in the middle of nowhere today. I have a question, the 2mm screw that goes through the middle, that is supposed to touch the frame is nowhere near the frame in my case (Giant Revolt carbon frame). It misses it by a whole centimeter. What should I do? Maybe put in a spacer in that covers this empty space so that the screw can touch that spacer?

Great video well done thanks

Thank you so much!!!

Great video. Thanks so much.

Fantastic video! Thanks! Just subscribed.

Thank you, did you have to put a ring/spacer between the frame/bearings and the chain set?

When attaching the cable through the pinch bolt, what position should the barrel adjuster be in?

Thank you for this it was super helpful. 2 questions: 1. If you want to use the clutch - will you have to dial limits even more potentially? 2. I've followed the video but in my grx 2x setup I hear rubbing when I'm in the large chainring in the front and if I try and get into the larger cogs in the back. Essentially about halfway it starts to rub. Small chainring in the front is pretty good with both extremes. Thanks!