Freightliner Cascadia DD13 DD15 ENGINE injectors cups replacement fuel in coolant coolant in fuel

No video

Freightliner Cascadia DD13 DD15 ENGINE injectors cups replacement fuel in coolant coolant in fuel

Рет қаралды 130,491

Күн бұрын

Now accepting support and donation to my channel.
accepting: personal check, business check, money orders, gift cards, gifts, tools, shop articles, etc,..
send your checks or money orders payable to Francisco Amaya
send your support and donation to:
Francisco Amaya
P.O. box 672
Fontana CA, 92334
OR
PAYPAL
www.paypal.com...
(remember to add your address at PayPal donation)
__________________________________________________
Warning
Don't do this job if don't have the proper tools, if you fail to do the job correctly the engine could suffer catastrophic damage.
This process will work with all DD13 DD15 DD16 OM 471 OM 472 OM 473 engine from 2008 and up
If the fuel in coolant is visible in the coolant drain the coolant multiple times and clean the coolant system with any cleaning additive to prevent any damage to other components of the engine
for details about the fuel system bleeding check my video FREIGHTLINER CASCADIA DD15 ENGINE OIL CHANGE • Freightliner Cascadia ...
Freightliner Cascadia DD15 engine playlist
Freightliner videos: • Freightliner videos
__________________________________________________
Radio station: 96.7 FM Kcal rocks IE
#franciscoamaya #franciscoamayaDD15

Пікірлер: 314

@js2380 3 жыл бұрын

Have no words to describe the good work you’re doing Francisco!! Incredible to have the heart to film while you’re working!!! Hope more people can appreciate what you’re doing with your time!! Just amazing

@usdpaulp 6 жыл бұрын

Amazing amount of detail. Thank you for your hard work.

@sergiocorres6822 6 жыл бұрын

If you plan to leave the injectors out of the engine for a long period of time or couple day ,make sure you cover them or leave them inside a diesel pan , if not you will have to replace an injector or more. Also make sure to prime the fuel system when you are ready to start the engine after this repair or you can damage the fuel pump since fuel cools down the fuel pump ,it is bad to overcranck engine with fuel pump dry.

@majedatiyyat3974 6 жыл бұрын

Just wanted to say thank you so much for getting back to me with your replies. Your help is very much appreciated and you are very generous to share your knowledge. I would definitely give you my business if only we were on the same coast!! Thanks again!!

@franciscoamayaYT 6 жыл бұрын

Thanks

@marioamaya578 4 жыл бұрын

Thanks so much Francisco. This information really helps. You are doing a really big favor to all of us who want to learn how to troubleshoot your truck and don’t really know. Your videos make me feel like a mechanics. Thanks so much again. Keep making this videos.

@alcidebutler 4 жыл бұрын

Phenomenal video! You've saved me butt on so many occasions. I kind of know what to do but I do not know the step by step by step by step and just one little mess up can do a lot of damage!!!!!! I am going to donate to your cause!

@NK-dh1mo 5 жыл бұрын

God bless you and your family eternally Francisco your one of a kind

@challengerm6127 2 жыл бұрын

What an Amazing guy I guess This Guy Born Different… He is so talented and Very Dedicated to His Job… Such an Amazing work .. I’m learning lots of things from all his Videos… Thank You for your hard work Francisco Amaya…

@martinsolis9671 6 жыл бұрын

Thanks, big bro you are a really good person God bless you

@Israel777 2 жыл бұрын

Best detailed video done the RIGHT way!

@nmmkkkk219 Жыл бұрын

This guy is good and showing ease job if you have skills you can do your self or dealer will reap you off

@danielmassey9799 3 жыл бұрын

Replacing cups, now I know the part number for the tool. Good information

@davidmoran8539 6 жыл бұрын

Very nicely done Francisco, detail work was easy to understand and performed.

@JasonweedQ3 6 жыл бұрын

Great video. Now this is how you explain something.👌

@brucecuster2575 3 жыл бұрын

Thank you for all your videos. Much appreciated.

@diaznevai8624 6 жыл бұрын

Very good video easy to understand all the details, thank you Francisco

@josegaribay5427 5 жыл бұрын

Primeramente darle Las grasias por sus videos mu bien explicados que hasta yo que soy aprendis de mecanico Los entiendo.siga asi de amigable y amable y le aseguro que tendra mucho exito en su vida y trabajo.y dios lo bendiga amigo..

@emmanuelajoseph977 3 ай бұрын

I just come across your video. I remove my hats out to you sir. Really great job. Where are you located? I really need a good mechanic that know what they’re doing.

@8300rpmallday 5 жыл бұрын

Great job to the detail of your work I’m proud and honored to see people take that much pride in there job On A DD15 how much would this job cost with replacing all injector as well with oem injectors

@franciscoamayaYT 5 жыл бұрын

Each injector cost around $600 +/- So you are expecting to spend $5000 +/- parts and labor, including the cups and seals

@cesarvargas7736 6 жыл бұрын

ready for a road test great job thanks for sharing!

@makincash3337 Жыл бұрын

Thank you

@ronfish8375 11 ай бұрын

pristine taste in music.

@josevillegas9029 4 жыл бұрын

Great vid, doing some on a clients truck. Take care !

@spiritualrealities999 5 жыл бұрын

What an awesome and very insightful video. I am currently experiencing this very issue with my tractor. You're video has given me the confidence to attack this task personally. I do have a few questions though. 1. What is the tool called to remove the injector cup o-ring? 2. What is the tool called to pry up remove the fuel injector? 2What did you use to clean the Injectors and injector cup holes? What type of lubricant did you use? I appreciate you sharing your expertise Fransisco. Thanks so much!

@yosephlakew3039 2 жыл бұрын

We want to see how you replace the whole proses details, thank you for showed us the straps

@Razor_36 6 жыл бұрын

Randy Rhoads at 4:24. Oh yeah sweet video!!

@codyhitchcock3443 5 жыл бұрын

I work at a fleet shop and we've done a couple of injector cups. We put something in dawn dish soap but I don't remember what it is the cups maybe? idk personally I haven't got to do any but you make it look easy idk what the other mechanics complain about maybe its the DD-13 in the day cabs since you dont have much space for 4 5 and 6

@balerman-kj1bv 5 жыл бұрын

Very nice explanation and video work

@joe197272 11 ай бұрын

When seals go bad on injector cups that's why I get antifreeze in fuel and get bog down and a back fire. I can tell it's in one cylinder because truck keeps running at 45 mph. Truck in shop and getting head gasket and all seals replace 😢

@shaotongli3343 Жыл бұрын

Very very good video, my brother. Recently I met these problems : diesel in coolant, coolant in diesel ! They changed all 6 injector cups . But after fix that. I feel my truck no power now ,lose power than before . Also high fuel spend. Before is 8.0 MPG, now drop to 6.6 MPG. Do you know what happened? I spend $6000 to fix. Then my truck becomes weak.

@benjaminperez8112 4 жыл бұрын

Muchas gracias por Tus videos para mi es muy importante por que aprendo mucho una Velma’s Gracias

@juliogomez4140 4 жыл бұрын

Good video CHICO 👍

@Marcusf250 4 жыл бұрын

I have a 2010 Cascadia and fuel is in the coolant tank and also overflows out of the small drain hose

@franciscoamayaYT 4 жыл бұрын

Replace the injectors cups

@hispanicuscorpus 6 жыл бұрын

Francisco,,,muy buen trabajo

@ahweeautomart6085 2 жыл бұрын

Very good video

@MrConstant1 4 жыл бұрын

Excellent video

@deloera68 5 жыл бұрын

Nuevo suscriptor, gracias por la buena explicacion paso a paso en el video ⭐⭐⭐⭐⭐

@jocker105 3 жыл бұрын

Good work keep up

@peterags2760 4 жыл бұрын

Insane in tha membrane 👍🏻🤣

@bigtrev6754 2 жыл бұрын

U are supposed to put the feed tubes in after u back off the injectors to make sure they are straight

@iraklirazmadze8952 3 жыл бұрын

Hi Francisco I tried to do the same and little bit coolant got into combustion chamber and now engine not cranking what should I do?

@sergiocorres6822 6 жыл бұрын

Do I have to listen to Cypress hill music to complete this job too???😁

@franciscoamayaYT 6 жыл бұрын

Yes, you have to. Metallica Avenged sevenfold Linkin Park System of a down Audio slave Etc,. This will help to perform a perfect job. 😁

@hectordeanda9133 5 жыл бұрын

Francisco Amaya you forgot AC/DC!

@josemateo2622 Жыл бұрын

My truck is shaking and when I started it up and trouwing a lot white smoke. They checked injectors and they're working properly, no leaks, no coolant consumed, what to do think is the probleme. Yoy think is the injectors cups?

@user-px1ws4xb7r 4 жыл бұрын

Some guy in irwindale charged me 800 dollars and he replaced them because of water in coolant and I never had a problem

@Gaaza11 6 жыл бұрын

Great video 💥

@firstname6208 6 жыл бұрын

a word of warning, snug down the injector, loosen the bolt- then install the fuel jumper line, after the fuel jumper line is snug then torque the injector as required. if you don't do it this way you cannot turn the injector so the threads for the fuel line will start. when all that is tight then tighten the inj line rubber seal to the cam frame. you want everything centered up before you tighten anything or it will leak. if you see any engine oil in the injector harness connectors replace the harness. you do not want oil migrating down to the ecm- much more expensive to replace the ecm.

@nealyville 5 жыл бұрын

What will happen if I can't calibrate the injector? I dont have the computer?

@franciscoamayaYT 5 жыл бұрын

Just put the injectors in the same place But, it you install a new one. There will be not fiscal issues if you don't calibrate the MCM with the new injection. It can only affect on how smooth the engine runs or economy of the engine.

@nealyville 5 жыл бұрын

Thank you sir you help me save 2000 bucks. How do I tip you

@franciscoamayaYT 5 жыл бұрын

send your support and donation to: Francisco Amaya P.O. box 672 Fontana CA, 92334 OR PAYPAL www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=6ZBD5RQTKC6X2

@nealyville 5 жыл бұрын

@@franciscoamayaYT I did something dumb I 4got to remove plastic tip off injector do you think I messed something up? Or do I just need to go back and remove the injector and correct the issue

@juntong651 Жыл бұрын

Hello I got a question. I did a replace a number 3 injector, replace the injector harness, replace the fuel line, and the after I replace it put everything back together and I try to start a truck. It will crank couple times, ( weak crank and stop cranking and it won't let me start a truck, did pump the fuel try to start the truck through there starter and it won't start, I didn't programmed the new injector in the computer, do you think it will be the problem that the truck won't start or could be anything else, maybe the starter but before I did this job, the truck start fine. I don't know, if you have any idea, please let me know. Thank you

@TroyP20 4 жыл бұрын

Hey great video can u talk about the injection line. I have a freightliner cascadia automatic 2015 and there is small traces of oil buildup on injection lines should I be worried

@franciscoamayaYT 4 жыл бұрын

Usually that is just the seals of the fuel lines

@jamesmewborn9671 Жыл бұрын

What is part # for tool u used to pop out injector

@juanolivares9256 3 жыл бұрын

Buen Video Francisco, pregunta cuantas horas aproximadamente es Este Trabajo Gracias

@franciscoamayaYT 3 жыл бұрын

Depende el que tan grande es la contamination. Entre 4 horas hasta 8 horas

@unkjason 4 жыл бұрын

Where did you get the injector cup oring remover tool? I'm thinking he took it from his utility belt. Because he is the Mexican Batman!. You my friend are amazing!!!

@DK-fq3hy 6 жыл бұрын

Excellent. You are incredibly knowledgeable. How long did the job take? how long was it supposed to take? how much was the total invoice bill? thanks!!

@franciscoamayaYT 6 жыл бұрын

Around 6 - 8 hours of labor, it will faster is there is not much fuel contamination in the coolant system. It is going to cost around $1,500 - $2,500 depending on the parts you have to replace.

@CarlosLopez-wf1wo 6 жыл бұрын

Damian Karras b

@peterl.1929 4 жыл бұрын

Wow..1500....to 2500 I have the same problem with my 2015 freightliner I took it to the dealer and they asked for $19000.00 ...

@franciscoamayaYT 4 жыл бұрын

They are crazy

@jovangill9530 5 жыл бұрын

Amazing content bro ! Really appreciate all the help ! How did you diagnose this problem to the injector sleeves?

@franciscoamayaYT 5 жыл бұрын

There is fuel in the coolant or coolant in the fuel

@musheghhayrapetyan8982 6 жыл бұрын

I have replaced them on my junk dd15 yesterday. It's so fucken hard to put the o-ring in #6 . If you are a fat guy you need to find skinny helper :-)

@robertpope3619 6 жыл бұрын

Great video! You may already know this but dealer always reccommends replacing injector lines when tampering.

@chick3nbig777 3 жыл бұрын

Some times they recommend thing just to make money off of you.

@lasaguilasmechanicdieseldeppv 6 жыл бұрын

Bueno el video salu2 desde Edinburg Tx. Podrias hacer vídeos en español? Seria grandioso gracias

@franciscoamayaYT 6 жыл бұрын

Si, ya estoy haciendo video en espanol Dele click a este link para que vea los que tengo Francisco Amaya en ESPAÑOL: kzfaq.info/sun/PL0kdrX_PXtdQ_XiJlkA2hGSDSKapPcbtR Casi Todos los domingos voy a poner un video en español

@waltergarcia4888 2 жыл бұрын

Hey Francisco I really like your videos. My name is Walter Garcia I have 2016 Freightliner Cascadia thanks to your great videos I'm doing all kind of maintenance on it. Brother I can't find where is located the coolant filter 😫 my question to you: it is possible for my truck not to have one

@vitaliykostenko2567 Жыл бұрын

Hi Francisco I have fuel in antifreeze replace everything like in your video filled up with new antifreeze still lots of diesel in system mine is 2014 is there anything else can cause that issue or just need to flush out the system cople times? Thanks

@charlesrobinson1897 6 жыл бұрын

Looks easy

@dannigirl419 2 жыл бұрын

after we did this were getting a random clicking noise and a high flow in the rail code going on and off. could it just be air in the system?

@johnramirez3613 2 жыл бұрын

I have a 2015 DD15 I done everything on your video (great) to replace cups. I replaced everything on video but now I have code spn 651 fmi 5 . It shows injector 1 short circuit. I Did not have no code’s to begin with.. I replaced cups,cleaned injectors ( soaked incarb cleaner and clean with air) all the rings and brass seal. All filters. What to do next??? I’m pushing on time limit.. please help if you can.

@jonvontapettigre 3 жыл бұрын

hi have a 2014 freightliner cascadia i have to prime my fuel every day

@adamabdullah4829 3 жыл бұрын

Hello Francisco, thank you for great videos! I have freightliner cascadia 2016, manual transmission, I’m having problem with something I have never seen, when I’m driving my truck it has a whistle when I push on gas and shake with that whistle, especially when it’s cold it’s more, also heavy load makes more that whistle, have you ever fixed that kind of problem? May it be injector or turbo? Whistle like when the water boils in the kettle with a whistle. Also can you share of your shop location please? I really want to come to you in these days

@unkjason 4 жыл бұрын

Operation game champion

@omartapiatapia3298 3 жыл бұрын

Por favor alguien me puede decir,si es necesario drenar el cooland si no esta contaminado con aceite,,solo por cambiar los cap cup por mantenimiento,agradesco su repuesta

@joegarcia5207 5 жыл бұрын

You are amazing sir. Quick question hope you don't mind me asking. I bought the tool from my local dealer looked just like the one you used but when I went to use it the cup got stuck on the end n wouldn't come off I couldn't use it. I don't know if maybe you moddified yours. If you have any insight about this I'd be much obliged

@franciscoamayaYT 5 жыл бұрын

My tool is OEM not mod. You have to rotate the top screw to release or hold it.

@boomanati8772 Жыл бұрын

Did you have to pressurize the fuel system before starting

@franciscoamayaYT Жыл бұрын

yes, you do by using the primer pump or the external fuel filler pump

@casixlogistics7464 2 жыл бұрын

Viejo cuando sale cambiar un injector ? Que recomiendas cambiar ya de a ver quitando la cabeza.? Me salió spn 654 fmi5 de código

@nkanyisogumede8217 2 жыл бұрын

Hey there.Im in South Africa my series 60 530 motor has jst started doig exactly this thing.Im worried abt wht could happen next?

@jsingh3052 2 жыл бұрын

I have a question. 2015 cascadia dd15. I took the injector cups out but there were no o rings. Am I missing something here? Any help would be appreciated.

@mohsunbashir 4 жыл бұрын

I have the coolant going in fuel filters. I don't see the fuel in coolant reservoir. This is probably the same problem right.

@jastonsmith33 Жыл бұрын

There was a cranking issue once all work was completed. I got the same issues. How do I fix this or what could be the issue?

@Jekeey1 3 жыл бұрын

Hello Francisco I have the same problems, my question is what are the chances for the coolant to go in to the Diesel tank, because I have almost a full tank of fuel. Did you also drained the fuel from the tanks too. Plz let me know. Thank you sir.

@pedal2dametal686 4 жыл бұрын

What tools/sockets do you use to to remove/torque the high pressure fuel lines especially going to the head?? Thank you

@letsgo243 6 жыл бұрын

Great video! Can you recommend a good fuel injector cleaner additive for the fuel tank?

@BillyBob-vz8ol 2 жыл бұрын

hey FA. i have a 2014 coranado 132 with 776k miles. my trucks using antifreeze. they pressure tested system it’s holding 1500 psi. they suspect this same issue. what are signs this is the issue ? and what’s the normal cost to have this fixed

@jonele2247 5 жыл бұрын

Hello Nice to see video like this Thank you! Just wanna ask how much cost amount for labor and parts?

@TheFaze732 3 жыл бұрын

Can you reuse the injector cups and just change the oil rings?

@michaelburneo8449 3 жыл бұрын

Que tal Francisco como detectas el problema del coolant en los injectores

@ramandogra9306 2 жыл бұрын

I got one question if coolant gone in engine then any solution

@vinnyddavis6328 2 жыл бұрын

great video! about how much in labor does this procedure cost? I am looking to buy a truck next month and through the research I have been doing says the cup seals go out in these engines at about 500k miles. The truck I am looking at has about 467k mikes on it. Also, do you take new clients?

@kobabymy23 2 жыл бұрын

Hi, can bad injector and injector cups O-ring cause to blow white smoke on dd15 engine? Also loosing coolant when engine is cold/off and some coolant leaks under between engine and trans. =(

@jayfive6971 2 жыл бұрын

My truck is a 2015 with 490,000 miles on it I don’t have any problems but the dealer is telling me I should replace my injector cups at 500000 miles as preventative maintenance what is your opinion what mileage should you have them replaced at if there is no issue they said if I don’t have them replaced and something happens it could cause the one box to go bad

@aleksandarefnushev8602 5 жыл бұрын

Hi Francisco. You have a really good information for us the truck drivers. I have a leak from the last 2 injector fuel lines and also my truck is not pulling that strong like before its not a big difference but I can feel it, its kind of struggling.What you think can be the cause of that happening and what can I do to fix that ? Thank you !

@franciscoamayaYT 5 жыл бұрын

Replace the fuel lines and test the truck, let me know if any changes.

@armandomeza5882 5 жыл бұрын

Francisco I have a Detroit dd15 and I noticed but there is diesel in the coolant reservoir do you have any suggestions

@andrezgomez8131 6 жыл бұрын

Great work! You are very knowledgeable with a dd15. Can you please give me the address to your shop if you're in California? Thank you

@franciscoamayaYT 6 жыл бұрын

I am in Fontana CA

@andrezgomez8131 6 жыл бұрын

Yes. I got your address from the internet. Thank you. See you soon.

@edwinsandoval9566 3 жыл бұрын

can you please tell me what part number to remove the injectors

@fabioborges6571 4 жыл бұрын

Francisco que tal yo tengo el mismo problema en mi camion es mucho el Diesel que esta en el tanker de agua y tambien en los tankes de diesel, tu cres que sea el mismo problema...muchas gracias

@CKWBama 4 жыл бұрын

Thanks for the videos. Please tell how to clean down inside the hole after cups are removed. I’m going to do this job as a prevention measure since I’ll be in there doing a valve adjustment. I have 735,000 miles on a 2014 DD13. Do you think that’s a good thing? Thank you for the advice.

@franciscoamayaYT 4 жыл бұрын

Just use a rag to clean it. Yes, it is good. You can prevent it.

@timothycarter5012 4 жыл бұрын

Great video. What was the correct torque for the fuel lines coming off the common rail? I know internationals are odd ball numbers, like 17 lbs/ft plus 60°

@franciscoamayaYT 4 жыл бұрын

That equals like 35 psi. That same can be applied to DD engine. If you give to much torque they get stuck and it is ready hard to remove them.

@grandeespiridolfo6759 3 жыл бұрын

Hey buddy how bad is to have a oil in the injector harness?

@extremevids3374 4 жыл бұрын

How many miles do have to replace the injectors cup

@jr996turbo 4 жыл бұрын

Awesome video, I need this done to my truck. Where is your shop located?

@antoniodavis6051 6 жыл бұрын

Hey what’s going on I have a 2011 freightliner cascadia I want to ask this question when I pull my parking breaks on my truck 2 min my motor start idle up to about 10 rpm when I push the parking break back in it stop so basically I can’t use my parking breaks because of that a friend of mind side it could be my camshaft what you think it could be

@majedatiyyat3974 6 жыл бұрын

All of your videos are very helpful. Thank you so much for posting them. I have a question---I have a Cascadia 2014 DD15 engine. The General vehicle warning light (check engine light) keeps coming on after about 30 min of driving each day. Then the check engine light will go off, and the low priority warning light comes on. It then stays on for a day or two then goes away. Do you have any idea why this happens or what I can do about it? I just replaced the DPF filter. Thanks for any help you can give.

@franciscoamayaYT 6 жыл бұрын

Can you pull any codes? I can give you a better idea if you can get a code number.

@majedatiyyat3974 6 жыл бұрын

Francisco Amaya I've got four codes for you: 3251, 168, 175, and 130. I really appreciate your help. By the way, what area are you in?

@franciscoamayaYT 6 жыл бұрын

The code 3251 is the most important. This code means DPF pressure out of range high. This could be caused by: Bad DEF pressure sensor DOC restricted flow DPF news service DPF restricted flow Broken DOC DPF module

@makincash3337 2 жыл бұрын

How do I I know if I have coolant in my fuel?

@willhoneycutt6315 4 жыл бұрын

Francisco, can I replace the fuel line seals and fuel lines without having to remove the valve cover? Should I remove the fuel rail to make it easier to replace the seals and new fuel lines?

@franciscoamayaYT 4 жыл бұрын

Yes, you just remove the line. Use a 19 mm wrench. And then you can easily remove the seal.