Freightliner DD13 "power loss" here's what fixed my problem😵

No video

Freightliner DD13 "power loss" here's what fixed my problem😵

Рет қаралды 44,298

Күн бұрын

shop told me my TURBO was BAD 🤦🏾‍♂️come to find out my TURBO was like NEW.. these shops will run a train on you and not give one fucc! I'm glad that I'm mechanically inclined and own tools.. and wasn't scared to take on this job... other wise I would of been -5k 😑 I will be investing in my own personal scanner soon!

Пікірлер: 71

@ShadowMan-ks5vo 8 ай бұрын

As a mechanic I tell owner operators to buy a scan tool it will save you lots time and most importantly money but I am glad you got it running

@ivanivory3366 5 ай бұрын

My freightliner 14 DD15 does not go pass 55 and gauge reads at 70 then it stops working. You think it can be speed sensor or program my cpc4 since i replaced it after stolen one.

@HoldenDown 3 ай бұрын

@@ivanivory3366get your cpc reprogrammed at a dealer and have them update all your modules as well.

@corpusreyes1040 Жыл бұрын

Boss Good info. It came in handy. My issue was the Delta sensor. The the map sensor did not have to be changed. I just added on so that my sensors are new . new V-POD sensor did not need to be changed. I have a 2016 Cascadia evolution….

@mr.demoguy 6 ай бұрын

What code came up on your dash before you replaced the delta sensor?

@wisdom9195 3 ай бұрын

Whoever told you the background sounds were funny, sue them!

@gbcsanders9896 2 жыл бұрын

Right on 💪🏿 you a cold G for that

@GtPRiCH 2 жыл бұрын

Man that shit wasn't no joke.. easy joke turnt into a whole week of work and that wasn't even the problem

@EASTCOASTIMPERIAL 2 жыл бұрын

@@GtPRiCH Hi, did this resolve the issue?

@GtPRiCH 2 жыл бұрын

@@EASTCOASTIMPERIAL did you watch the whole video

@burtondorvil1383 Жыл бұрын

Backyard mechanic 🙋❤️

@loganblackGT 7 ай бұрын

Thank you my 05 has that same problem I’ve changed delta p turbo air to air and still havnt fixed it I did need a new turbo badly and air to air was cracked

@topshelf4176 2 жыл бұрын

Your air filter can cause this problem. Alot of shops want check or change your main air filter when you get a p.m. they always change your cabin air filter

@cheekydan4592 7 ай бұрын

I found the issue mine had. The wire hornets was bad had oil in it form the oil pressure sensor. I replace wire hornet and oil pressure sensor and it run great after.

@GtPRiCH 7 ай бұрын

Good catch

@101fish9 Жыл бұрын

Nice video. Thank you.

@Contreras-z4e 9 ай бұрын

This is the KZfaq yard dog 😂

@Dmtr909 5 ай бұрын

Simply bad diagnostic. Next time bring it to Fontana,CA 92335

@scottmocahbee2286 19 күн бұрын

Was it blowing smoke before you fixed it?

@GtPRiCH 19 күн бұрын

@@scottmocahbee2286 no

@reggieblack6605 Жыл бұрын

I got same issue and about to start taking the turbo off inspecting it and definitely replacing my vpod and possibly my actuator wastegate and crankcase ventilator (oil separator) where you get that tool box from that set up pressure 🔥??

@GtPRiCH Жыл бұрын

Take the turbo of last... it came from harbor fright

@reggieblack6605 Жыл бұрын

@@GtPRiCH Bet.....appreciate the response

@James-js6dx 2 жыл бұрын

Gtprich. Ftw. 👍🏿

@cheekydon2715 Жыл бұрын

I have the spn 102 fmi18 and can’t seems to figure out what’s wrong took it to Fraightliner and they change the boot and manifold temp sensor and said I should be good. But 100 miles down the road it came right back.

@GtPRiCH Жыл бұрын

What's the code reading when you look it up?

@evenorderas9526 9 ай бұрын

Were you able to fix it?

@amanjotsingh2686 7 ай бұрын

So brother what fix your problem because im having same issue

@evenorderas9526 7 ай бұрын

@@amanjotsingh2686 i needed to replace dpf filters. Were clugged. If you haven clean them in the past 2 years is always a good idea to do it.

@jestgetit8786 Жыл бұрын

Was this your first time doind this on your own. I'm thinking about doing mine myself

@GtPRiCH Жыл бұрын

Yup

@Docblogs Жыл бұрын

Parts numbers please

@buchanan7371 2 жыл бұрын

Did you have to do a maf flow sensor calibration

@GtPRiCH 2 жыл бұрын

@derrickw5660 2 жыл бұрын

Ok thanks what was the part you said to check or replace at the end of the video my sound went out on that part

@GtPRiCH 2 жыл бұрын

V-POD

@derrickw5660 2 жыл бұрын

@@GtPRiCH thanks

@choycampbell4303 Жыл бұрын

@@GtPRiCH Thank u

@SonuSingh-hr4mz Жыл бұрын

Bro i have also dd15 2015 freightliner cascadia The code is spn 102 fmi 18 Change new dpf one box Chnage new turbo charged Change all sensore or all hoses But code still on screen I have my truck pick uo problem

@steveaylas4711 Жыл бұрын

I have same code, could not find the problem. Please lmk if you figure this out

@cheekydon2715 Жыл бұрын

I have the same problem and can’t figure it out

@qb6570 Жыл бұрын

Have you tried the air intake manifold? That code is saying the manifold is low.

@Yycprince Жыл бұрын

I changed exhaust manifold

@gurpreetbhullar7407 10 ай бұрын

change crankcase filter

@mrbrankroll4885 2 жыл бұрын

Good shit driver. Stay on top of it. P.s where u get fuel from. Diesel higher then giraff pxssy. Can't wait to see that GN with 1k hp

@GtPRiCH 2 жыл бұрын

😭😭😭😭 sams club frw

@mrbrankroll4885 2 жыл бұрын

@@GtPRiCH my ninja 👌

@alpine6871 Жыл бұрын

What's a v-pod???

@keithtorbert9929 2 жыл бұрын

Hi I need help my truck went in the shop February just got it back no power

@GtPRiCH 2 жыл бұрын

Watch the whole video and check out what I replaced..

@jermaineroach976 4 ай бұрын

Was it losing power going uphill or just a lack of power all together? My DD13 is losing power going uphill only

@GtPRiCH 4 ай бұрын

All together

@EZNowTrucker 2 ай бұрын

Mines doing the same thing. Even with an empty 14000 lb tandem reefer. Mines rated for only 435/1550 but still should haul an empty no problem. Only light on is check engine. Your problem get fixed by any chance?

@EZNowTrucker 2 ай бұрын

Mine does same thing. Mine is the 435/1550 rating. Did you find the issue yet?

@jermaineroach976 2 ай бұрын

@@EZNowTruckercheck the air to air flow to see if it’s cracked. I had to install a new new turbo and that helped some but my issue is still there. Just have to pick the right time to put mine back in the shop but my mechanic said that might be the problem. Installed new software to increase the horses to 500

@jermaineroach976 2 ай бұрын

@@EZNowTruckeranother thing g I had my DEF deleted when I first purchased the truck. Not sure if you did that or not but… my turbo had a hole in it so it did increase the power but still not where it should be. My 435 hp truck pulls like a champ but not this 450hp one. My 2 trucks are 2013 and 2014 models DD13. Once I get the issue resolved I will definitely let you know. Good luck until then and check that air to air flow

@booyakashaboy7250 Жыл бұрын

Decent vid driver. Though I could do without the cheesey sound effects. Very distracting & made it hard to hear u at times.

@derrickw5660 2 жыл бұрын

Do you come out and run a complete computer diagnostic

@GtPRiCH 2 жыл бұрын

No I didn't.. this my first time working on it

@stratefacts9075 Жыл бұрын

Did freightliner say check v pod ???

@GtPRiCH Жыл бұрын

@buchanan7371 2 жыл бұрын

Was the issue fixed big g

@GtPRiCH 2 жыл бұрын

Did u watch the whole video lol

@buchanan7371 2 жыл бұрын

Yes

@buchanan7371 2 жыл бұрын

At the end i saw it running i got the same truck i have loss of power change the 3 things maf flow sensor,the othe sensor and vpod but code 411 pops up is asking for maf flow sensor calibration

@buchanan7371 2 жыл бұрын

I deleted the. Def im located in phx az where you at