Freightliner Ride Height Adjustment

No video

Freightliner Ride Height Adjustment

Рет қаралды 44,620

Brackish Mongrel

Күн бұрын

Пікірлер: 55

@RadeStevanovicSrem Жыл бұрын

Short, and straight to the point! You should keep doing it this way! EXCELLENT!!!

@Savageking0000 Жыл бұрын

Yes it was! All the other videos just gave me a headache

@rss608 2 жыл бұрын

yes, first vid that explained the elongated slot adjustment method. excellent

@JS-jv6rg Жыл бұрын

You nailed it, this is the correct way of doing it.

@williefanning4965 2 ай бұрын

Thank you very much 😊

@raimey2929 2 жыл бұрын

Out of all the videos I've watched so far this has actually been the most helpful I just replaced my leveling valve today but I didn't understand the instructions by keeping the bolt loose now I understand thank you I'm going to try that later today thank you

@BrackishMongrel 2 жыл бұрын

Glad I could help.

@thebigboss1839 2 жыл бұрын

How did it went ?

@truckingwithcliff 4 ай бұрын

Excellent video

@bennyhall7444 2 жыл бұрын

Awesome video brother very very helpful please make more your a natural born you-tuber

@kevincolson5609 Жыл бұрын

Thank you brother! Best explanation yet!

@BrackishMongrel Жыл бұрын

Glad it was helpful!

@xMeTrOxStAtIoNxBaBeX Ай бұрын

Thx for the help driver.

@briankeefe6161 Жыл бұрын

Thank you sir since I don't weld I'll try your idea first be safe out there driver

@davidfs.6233 Ай бұрын

Thy..very big help.i was about to cut mine

@AJ-zg7sc 2 жыл бұрын

This is how I got freightliner Columbia to drive like a Cadillac. Most people don't know. Awesome video here.

@Unknown_305_Miami 2 жыл бұрын

Do you know the leveling hight

@BrackishMongrel 2 жыл бұрын

@@Unknown_305_Miami This isn't a very technical answer, but it's what I have found to work well on my truck... I just basically get it to where the top of my frame rails are even with the top of my tires.

@thowguandong3076 Жыл бұрын

@@BrackishMongrel I'm not sure what you meant, can you give easy words to understand

@DR-um2bv 21 күн бұрын

Front set of drives or rear set @@BrackishMongrel

@BrackishMongrel 19 күн бұрын

@@DR-um2bv an average between the two, as there is a bit of rake in the way the frame sits. But if you're that close, then you're in the right vicinity. It's best to just avoid extremes on one end or the other.

@NB-ed5qv 2 жыл бұрын

I believe my truck currently has this issue.thank you for information.feel like it to high than normal

@bertclement3010 3 ай бұрын

Great video man. Thanks for the info.

@esteban9250 6 ай бұрын

Good video 👍

@AmarjitSingh-ql2uv Жыл бұрын

Thanks a million brother 👏🏼👏🏼👏🏼👏🏼

@BrackishMongrel Жыл бұрын

Glad it helped

@vicpetrishak7705 4 ай бұрын

Do not cut the suspension rod . Check to see if the differential rod bracket is bent . Remove rod from air valve bracket arm . Chalk Steer tires and release parking brakes . Adjust air to air springs , bring frame level across the tops of tires . Place golf tee through air valve bracket into valve body . Connect rod to bracket and tighten valve , remove golf tee .

@therainmaka6455 Жыл бұрын

Cool brother thanks 🙏🏾

@BrackishMongrel Жыл бұрын

You bet

@DR-um2bv 21 күн бұрын

Thanks. Has a slot ,huh. Didn't know that, seems as if you are only who knows. Now where should it adjusted at , level to the earth or what?

@buzzbustillos3016 2 жыл бұрын

That is a great video.

@RayWimbley 9 күн бұрын

Thanks! You did great! For a rookie! Lol😅😂😂😅

@funtarig Жыл бұрын

Helpful video ❤👍🏾

@jocelynquintal2710 2 жыл бұрын

Bravo amazing smart ...wow it easy and change all the ride

@dragondesert1134 2 жыл бұрын

Thanks man ❤️

@elwaters4635 2 жыл бұрын

Thank you buddy

@deliusfrazier2685 2 жыл бұрын

Thanks for the information

@MadTruckaYo 11 ай бұрын

Should the shaking in the rear be intermittent or constant. I have a shake in the rear and it comes and goes

@BrackishMongrel 11 ай бұрын

I get that too. Sometimes it is the trailer that I am pulling, but I think overall it's a combination of worn engine mounts, suspension bushings, tires out of balance, etc. Any number of things. I don't think it can be nailed down to just one thing. My truck has almost a million miles, and I'm learning to live with the fact that it's not new anymore. So if your truck has a bunch of miles with original motor mounts and suspension components, it's probably all of it together when it comes and goes like you're describing.

@sofistk8ddd1 Жыл бұрын

What is the height supposed to be at and will it change when empty or you have a trailer attached?

@BrackishMongrel Жыл бұрын

I've always set my height to where the top of the tires, (assuming they are 295/75 22.5's) are even with the top of the frame rail. And yes, it should be at the same height loaded and empty. That is the purpose of the leveling valve. It adds our removes air from the suspension to maintain a constant height.

@josea.ortega1431 Жыл бұрын

Good info man thanks

@BrackishMongrel Жыл бұрын

No problem 👍

@thebigboss1839 2 жыл бұрын

I need to raise m my suspension a little bit so I would move the valve slightly up? Or down ?

@BrackishMongrel 2 жыл бұрын

You would want to move the valve down a little

@jorgefacio690 4 ай бұрын

whats the recommended height???

@BrackishMongrel 3 ай бұрын

You want to keep the top of the frame rails close to even with the top of the tires

@adrianiorin8896 Жыл бұрын

They self adjust,problem is they go bad

@BrackishMongrel Жыл бұрын

Yes, they do self adjust, that's their whole purpose, but they are still manually adjustable at the valve itself to raise or lower the maximum height.