In this episode, repairing a badly damaged French Horn's bell stem/throat. Thanks for watching.
Пікірлер: 76
@shubus5 ай бұрын
It just seems like magic seeing these repairs take place right under your eyes. Wes's gentle work with the hammer is absolutely amazing This horn now "look like a bought one"
@HankScallyАй бұрын
This gentleman is the most patient person that I have ever seen. His work is the anthesis of the average 'rush-itll do' job.
@keithschwartz73185 ай бұрын
Years ago, I was a metal shop teacher in a high school. Whenever I had a student doing a project that required all the tapping with a planishing hammer, I would put him in the hall so the academic teachers could enjoy the tap, tap, tap. Listening to your work takes me back to a happier time of my life. Thanks for the memories. 😊
@Ronsonic5 ай бұрын
I am amazed at the way you can push metal around, especially ironing out that crease. Good camera work from the apprentice.
@auralsonicwaves71705 ай бұрын
I was fortunate to live very close to Walter Lawson and watched him remove dents from my horn using some of the same techniques you used in this video. I was mesmerized and was glued to the monitor watching you work on that horn. Thank you for these videos.
@NORTHERNROVER15 ай бұрын
I really enjoy your work Wes. You are a real craftsman and this looks like a very satisfying career. Perhaps I am naive but I didn't even know people did this until I started watching your videos. I have worked in car restoration for over 45 years and it is also satisfying, just very slow with some projects taking years to complete. Relatively speaking your work is pretty close to instant gratification. Cheers!
@kthwkr5 ай бұрын
Your ability to take out those dents just amazes me.
@TheMrAshley20105 ай бұрын
It's SO helpful to see your process. Thanks for the education! Great work as usual.
@samc58985 ай бұрын
Many have said it already but watching that damage and imperfection just melt away is incredible.
@ForestSchweitzer0220975 ай бұрын
Been watching for a while! Your video quality has gotten a lot better. Nice job, Wes! You are a fine KZfaqr.
@dabarons0015 ай бұрын
That’s awesome. I know the owner of that horn and have seen those dents in person. Can’t wait to see it again now that it’s like new
@Tocsin-Bang5 ай бұрын
Sixty years ago I had a dream of playing the French horn, after my music teacher played us recordings of the Mozart Horn Concertos. Sadly it never happened, but when I saw what had happened to this horn, I was close to tears.
@grumpikinsstinkamus91345 ай бұрын
I want to thank you again. Your videos are very helpful. I just successfully silver soldered a crack on a sousaphone. Your repair vids are great.
@jeffpuras75015 ай бұрын
Watching these repairs: 98 lb weaklings need not apply. My dad was a woodwinds guy. Thanks to you, I finally know what those strange tools are that were in his tool box. 😁
@buenaventuralife3 ай бұрын
Wes I have to thank you for what might seem repetitive videos, but do not. Watching someone with skills like yours is why I will watch your videos. Do not ever get discouraged. You are making things so cool. Plus we get to see instruments, like this French horn, into the details. Thank you!!!
@michaelbuchholz21645 ай бұрын
The only way to do this is huge experience. It is so easy to ruin an instrument finally. Great job! 😊
@DirkDwipple5 ай бұрын
Nothing like watching a pro in action.
@lietz135 ай бұрын
This is pimple popping content for band geeks.
@Meister15515 ай бұрын
I've said it before, You Sir are a Magician. You made that French Horn look fantastic.
@spike61925 ай бұрын
Wes Lee is my favorite instrument repairman!
@kristimiller-lee233827 күн бұрын
How many others do you know?
@djasge38935 ай бұрын
Thanks for sharing the « magic »!
@SeasideASMR15 ай бұрын
Incredible job. As a horn player, myself and basically everyone I know dented their instrument in this same place. Usually not THIS badly though. 😂
@belfastpaddy21695 ай бұрын
I appreciate your skill Wes. Hello from Ireland 🇮🇪
@Yakaduce5 ай бұрын
Thanx Wes. From Hawaii
@rogerhodges76565 ай бұрын
It is always fun to watch a craftsman at work.
@CraigRodmellMusic5 ай бұрын
One wonders what happened to that poor instrument that caused it to be in that condition! The owner of that instrument will be mighty glad that you could work your magic on it, Wes! Just as we were mighty glad we could watch you working your magic.
@nytestar40355 ай бұрын
If it's a school horn, marching band probably happened to it 😂😂, kids run into each other, horns get dropped or knocked into things. French horns are made of thinner metal so they take a little more of a beating because of their design.
@jadedpython5 ай бұрын
As a horn player and as other comments say, it's very easy to accidentally hit that part of the instrument. Pretty much every school horn I've handled has at least some damage to the bell stem, although I've never seen one as bad as in this video.
@nytestar40355 ай бұрын
@@jadedpython I have but usually it's from middle schools.
@jadedpython5 ай бұрын
@@nytestar4035 Fair enough. When I was in seventh grade, someone left their french horn on the ground and someone else tripped over it and completely totaled the thing. I never saw the aftermath but it was apparently really bad.
@DanielCoffey675 ай бұрын
When I had my French Horn it didn't have a removable bell. I am so glad you had that luxury otherwise it would have been more cumbersome to handle.
@imm3115 ай бұрын
What incredible work! God bless you and yours. Praying for you!
@lotsabirds5 ай бұрын
I've tapped on horns so many times that Taylor, one of my African grey parrots, makes the same sound!
@tomcook71335 ай бұрын
Thanks Wes, from Canada
@Renville805 ай бұрын
Clearly, the top requirement of such a job is patience...!
@apfelsnutz5 ай бұрын
BOY, i WISH YOU'LD TAKE ON MY 8d-RS. IT SLID OFF THE DRESSING TABLE JUST BEFORE OUR PERFORMANCE OF MAHLER 2 IN SAN DIEGO SYM. . I KNOW IT'S A LONG WAY TO SEND THE HORN, BUT YOUR WORK IS EXCELLENT, AND THE BELL IS JUST MANGLED. THANKS FOR THE VIDEO...
@BruceBoschek5 ай бұрын
Patiently and masterfully repaired. Thank you.
@persydiangelo84615 ай бұрын
It's nice to see the video format that got me into your channel making a return! Just simple, methodical dentwork. A little bit of commentary here or there, but mostly just honest dent-balls and hammer taps and "magically" the instrument is restored!
@steve_weinrich5 ай бұрын
Amazing every time!
@Davidjb377215 ай бұрын
Thanks for your input
@phooesnax5 ай бұрын
Fantastic job Sir!
@grahammorgan96355 ай бұрын
Outstanding repair once again , thank you Wes.
@ms-mac5215 ай бұрын
👍👍👍 tremendous work !
@geoffbuss36995 ай бұрын
Awesome work as usual, Wes. Nicely filmed too. I agree with the previous comment about the sparese commentary and even the sounds from outside are soothing.
@brucematthews64175 ай бұрын
You've got all the COOLEST TOOLS! ! ! I know it's all to suit the job but it's brilliant how the solutions come up and the tools take their shape. But still... I'd watch your channel even just to see the solutions in the form of the tools. And yeah, I'm a toolaholic.... Not only buying them but making them as well.
@colinetsegers23 күн бұрын
Nice demonstration. Thanks man :0)
@dzntz15 ай бұрын
Seek and Destroy! 🤘🏻
@benloyd19705 ай бұрын
Amazing
@phooesnax5 ай бұрын
Most techs would not have gone that last Mike.
@becassier4105 ай бұрын
Quelle patience !! 👍🙏💪 et comme l'on dit en France " bon outil bon travail " 👋🇨🇵🇨🇵🇨🇵🇨🇵🇨🇵
@ShainAndrews5 ай бұрын
The one instrument I never cared for. Challenging when you can't keep some pressure on the internal low spots while massaging the external high spots down. A guy only has so many hands....
@wesleemusicrepair98205 ай бұрын
That’s why you use your belly muscles as the third point
@rogerharris80815 ай бұрын
Those dents looked intentional and malicious!
@nytestar40355 ай бұрын
Probably not. French horns just can get dented easily because they're thin. They get dropped, knocked into things and if they're used in marching band it's definitely worse.
@jetsetsc5 ай бұрын
It's nice to see the specific tools you have on hand. Have you done a video about making burnisher from a file?
@James_Hough5 ай бұрын
I got about 690 hammer strokes on camera (probably more off)...sure I missed a bunch. I didn't slow it down to count...I'm not a weirdo.
@johns31065 ай бұрын
I assume that this French horn (like much of what Wes works on) is a school instrument, which makes me wonder, “How long until Wes’ careful handiwork becomes a moot point and the horn has significant dents again?”
@muramusan5 ай бұрын
Wonder how many times you can bend brass or the strength lost till it gives up 😢 but glad it's looking good and will sound great.
@mikerichards63115 ай бұрын
👍👏🏻
@terrydoberstein67425 ай бұрын
Was wondering if the temperature of the metal, plays any part on how easy it can be worked?
@funwithmadness4 ай бұрын
With that much tapping, do you ever have trouble with the brass work hardening? If so, how do you anneal it without trashing the finish?
@nytestar40355 ай бұрын
What are you rubbing on the dent ball? Is that for lubrication? I usually spray a little pledge (furniture polish) on mine.
@bobstevens61535 ай бұрын
Is the repaired area weaker after all the damage and repair work?
@geoffmoore78745 ай бұрын
I have a 1954 Julius Keelworth Alto Saxaphone made in Germany. It has plastic guard over the C#, B and Bb keys and it has been damaged and glued together over the years.We have contacted Keelworth in America and Germany and they have suggested a metal guard as they dont have a replacement for the plastic. Would you have any suggestions so I can keep the original look with a plastic guard? Any help would be appreciated.
@adenoidhinkel345 ай бұрын
Dear master!!! When the alarm clock rang and you looked at your watch, was it a signal to have lunch?
@Tomchannel-uz7vr24 күн бұрын
What do you use to clean pipes that have limescale buildup?
@incy555 ай бұрын
Do you see a change with each hammer stroke?
@twinsmm15 ай бұрын
Probably not worth it but have you tried using one of those paintless dent repair lights?
@ShowCat15 ай бұрын
Tap, tap, tap, tap, Tap, tap, tap, tap, Tap, tap, tap, tap, Tap, tap, tap, tap.......Sounds like music to me.
@davidwood3515 ай бұрын
Question: does a dented body tube distort the sound of an instrument? It seems to me that the sound waves would be impeded, and the tonal qualities would be altered.
@johns31065 ай бұрын
Short answer…yes…when dents are bad enough it impedes the airflow through the instrument, often resulting (if I’m not mistaken) in the pitch becoming sharper.
@thatairplaneguy4 ай бұрын
This has chiropractor vibes
@richardhoffman97295 ай бұрын
You might try bees wax instead of paraffin, it is a little easier to use and friendlier to the workpiece.
@fireantsarestrange5 ай бұрын
Honestly I have no idea how that kind of damage happens. Blows me away. Disrespect and just negligence.
@nytestar40355 ай бұрын
Drops, knocking against stuff. Running into each other on the marching turf.