By virtue of the Great State of Detecting & Relic Discoveries, we hereby appoint thee Dr. Calabash Digger, PhD (Physician of Digging) 😂

Great tutorial that explains single/multifrequency and the benefits/limitations that come along with each frequency. Easy for anyone to understand!

This is perfect just what I envisioned a way to get all involved.. brilliant starting points for everyone.. this will prove that there is no perfect machine and get to know your machine what suits your searching.. Well done 👌💪

Now these kind of videos are what I’m looking for. Much better than the same old , same old. Probably one of your best instructional videos I’ve seen. Good to see the big boys can all play together nicely too. Hope you continue this trend Calabash. I would like to also see the differences in park , field , beach and gold modes as well. This video on frequency was well explained and on point. Look forward to more.

Thanks for sharing!

Good stuff right there. Excellent video, very informative. Very appreciative.👍🍺

Great vid great denestration.Hope some class wil cover what is transmitted out of controll box of machine when you start hunting ,also how the coil come into play on transmission and reciveing a target .Why some coils consider hotter than other coils.Thanks again for vid and your time.

Big boys playing nice n great video 👍👍

Great video! Thanks

Good video brother....I don't understand why other channels don't talk about this subject much.

Excellent demo! Thanks for sharing👍

Thanks for the video. According to Andy sabisch the Legend on M1 is weighted as follows 4 kHz being the highest then 10 then 15 20 and 40 at the lowest end of the weight. It's the exact opposite on M2 it starts at 40 being the highest.I'm not sure about M3.

This is the kind of tutorials that I learn stuff from. Very well done Calabash. I'm still trying to figure out which program and why, using a notching system, would be the best program to use on a coin shooting program on the D2. I have one I believe set up in general now and it works great but always looking to tweek things better and still learning what causes clad to come in at a closer VDI reading in some settings over others.

Excellent video! Thank you!

Good job on this one Digger. I learned something that will help me run my Nox 900 to it's full potential.

Good info...👍

Thank you for sharing your knowledge.

Very Good Video.. 👍

Thank you for this video

Great information and no BS. Thanks

Excellent demonstration 🥳🥳🥳🥳🥳

I really appreciate this class. Continue doing great things like this. This is awesome.

Thanks for the video Calabash!😊

Good video. For legend users a dime mixed with foil will average around nickle signal 25 or 26 in multi 2

Observations from a youtuber’s video, testing frequencies with an oscilloscope: Equinox 800 & 900 frequencies (appear to be these on the oscilloscope, approximate): Park and Field modes run 7.75kHz & 38kHz, Beach modes run 7.75 & 38 (& possibly a 3rd of 17.95), Gold modes run 7.75 & 38kHz. Manticore: All Terrain General 7.75 28-29 50kHz, ATF same, ATLC same, ATHC 13kHz 48.5kHz, ATTR 7.75 28-29 50kHz, Beach modes (possibly 4 freq) 7.75 13 28 50, Gold modes 7.75 28 48. The big unknowns, are how much of each frequency response is actually being sampled or used in each mode, other than their "lower/higher weighted" mentioning (all controlled in circuitry/processing/algorithms/etc). Deus 2 is the only one that displayed 4kHz into the mix, in dive mode and in deep hc. The guy notes in his comments, the lack of an observed lower frequency with manticore mode ATHC, he tried to see it, but didn’t. Not sure if maybe his oscilloscope is maybe only two channel model, thus why it charts perfectly on D2 and the two frequency modes on the minelabs, not sure.

Love it thanks for showing us how to get more out our detectors these are the one to watch

Thank you brother, I didn’t understand frequencies mean before this. Greatly appreciated 🙏🏽

I look at your video again, you pretty much explained it....Thanks 👍🏻

great video calabash thanks for the info

Great information great videos thanks!!!!

Very helpful thanks !

This is great, really nice,

Learning more!!👍👍

very helpful! Thanks

this was a great lesson i never understood what the frequencys were good for until now.excellant job done.well exsplained.

Awesome video, Calabash! Thanks again for all you're doing for this great hobby. 👍

Nice education in metal detecting the useful variation in frequency, I found lots silver coins using intro level metal detector ( Platinum ) made by teknetics uses 7 khz was hot on silver up 11 inch. CD you are right lower the frequency better for silver

That’s a good one

Need that high here in Japan...Bronze Coins / Foil are the same. Thanks for review

nice presentation. Whats the ideal single freq for copper 1700-1800's coins?

Great Stuff from Professor Calabash and his magic Whiteboard. Just for information purposes, the abbreviation for Hertz is Hz and Kilohertz is KHz or kHz. 😀

Hey Big Cal Do you think it's better to stay in Multi or move to say a 40 for looking for objects that come in the foil to nickel range (Bronze) I will check it out when my MD gets here, Been working in the single frequency for the last 40 years, except for my CZ-21 I'm getting so old, I go back to the push button retune days, but not the BFO days thank God. Thanks, Have a nice thanksgiving 🦃

Well done! Very helpful and appreciate the lesson. What particular setting on the Deus 2 will eliminate iron grunt? Seems like no matter how high I discriminate, it still acts like an all metal mode.

Simplex win!!!!

Calabash would you try doing a land hunt in the Dive program. Salt sens 1 recovery speed 2 as this is the optimal setting for running this program. Also its better in full tones.

Great job CD. Really well done and informative. A couple thoughts: If you touch on this subject again compare signals on your gold coin to the silver coin - using the different programs. New detectorists might be surprised at what a difference the program choice can make. I find it helpful to go online and read the owner's manual for machines I'm possibly interested in buying, long prior to buying the machine. It helps me better understand that machine, and (hopefully) helps me make a more informed buying decision as to which machine is best suited for my soil conditions and the targets I most want to find. You might want to put a link to the owner's manuals for the machine(s) you are discussing.

PSA by Calabash.

Excellent video calabash thank you for being unbiased towards the metal detecting vendors. I've read some terrible comments that people have written about you and your videos. I guess these people are jealous or maybe they just like drama I don't understand them. Regardless everyone probably has their primary detector that best suits their ears soil ect. Like you said there is no perfect detector. I love my Deus 2 but for the price I feel XP could have given us a better lower shaft than that wobbly thing that comes stock. I love Minelab but there tonal nuances not so much and I feel the ergonomics could e better.Respectable Debates is a good thing.

Hey Calabash, how about doing a head to head comparison on newer pin pointers? I have the one that came with the Anfibio Multi. Works ok I guess. Would like to know how they compare, or which ones are good, better or best. Anyways, thanks for the great videos you produce.

Is there a frequency that falses less on nails and such? Any differences in hard to detect places like the ones that you have taken us to in the past? Excellent video, well done sir!

When in hunting in heavier iron sights with Legend would you notch anything out? I always leave it wide open. I like hearing all tones & iron. Also if you hear a nice high conductor and you also hear a iron object next to it. Then if the VDI is jumpy you know it could be a good target. Correct me if I’m wrong. Awesome video man!

If I want to just search for silver coins is there anything wrong with detecting in strictly the lowest frequency only? With the 900.

How come they don't have selectable frequency pinpointers.

This has been one of your best video congrats buddy you are in the right path , hope more people sees this and join to help your channel , just stay neutral and it will all work out

I can give you precise frequencies them all detectors works on