Front Axle Restoration/Rebuild (Dana 30)

  Рет қаралды 4,261,906

Restoration Station

Restoration Station

3 жыл бұрын

The rear axle video went really well and I'm happy with how it came out, but my restored and painted Chrysler 8.25 rear axle looked out of place next to the rusty Dana 30 front axle. I decided to try and repeat a similar process by restoring the front end.
Apologies in advance for the ugly welding on the track bar mount. At least it looks better than the one I cut off.
I'm really happy I did it, because I found out that one of the carrier bearing races was split and had destroyed the bearing. Setting up the carrier required a lot more tedious trial and error to set up than setting up the carrier in the Chrysler 8.25 rear axle restoration video. I cut out some of the shim swapping footage to make that part of the video more concise and less boring. I ended up having to buy 2 sets of bearings as well because I needed one modify one set to use as shim spacing setup bearings before pressing the real bearings on. Hopefully that part of the video is not too confusing for people.
I have a few more videos covering parts that connect to the front end of the Jeep that I've finished restoring and recording. You can probably guess what they are if you pay close attention during the end of this restoration video. They will be released as I get done editing them.
Instagram: restoration.station
Facebook: Restoration.Station.FB
TikTok: tiktok.com/@restostaysh

Пікірлер: 1 000
@tylerbrown9835
@tylerbrown9835 3 жыл бұрын
All that for a Dana 30
@LittleMikeStarCraft
@LittleMikeStarCraft 3 жыл бұрын
They are good axles if you don't want big tires... xD
@cablenowadays6586
@cablenowadays6586 3 жыл бұрын
It’s a great axle. I run 35s on mine with chromoly axles and it gives me a lot of ground clearance with a lot of stuff to beef it up made these days
@keenanp9045
@keenanp9045 3 жыл бұрын
Not everyone wants to axel swap lmao
@tylerr676
@tylerr676 3 жыл бұрын
@Jasper Dane what? why would you do that? thats like, Crappy relationship, no trust dude.
@sukheshkumartandan7842
@sukheshkumartandan7842 3 жыл бұрын
Uuuuuuuuuuuuuuu
@MarkMcCabeMarkMcCabeVideo
@MarkMcCabeMarkMcCabeVideo 3 жыл бұрын
I could watch this all day because there is no talking just the audio of tools clinking. Amazing.
@stevejette2329
@stevejette2329 3 жыл бұрын
Mark _ YES !! Excellent lighting, camera angles, sound etc
@serhiitaranchuk7348
@serhiitaranchuk7348 3 жыл бұрын
Nice men good job
@olkeriilremengesau5461
@olkeriilremengesau5461 2 жыл бұрын
You are right.
@ABZ49er
@ABZ49er 2 жыл бұрын
Exactly 🤙🏼
@JuanFlores-cm7df
@JuanFlores-cm7df 2 жыл бұрын
Pppp0p
@brycegrant1
@brycegrant1 Жыл бұрын
Did i actually just watch a mechanic asmr with no swearing or busting of knuckles… this man is a god
@bradhoff5035
@bradhoff5035 Жыл бұрын
Fantastic! Nice to watch someone actually do the work without loud music, and telling everyone how good they are! WELL DONE!
@kevinhoodless4206
@kevinhoodless4206 2 жыл бұрын
No commentary or stupid gags, no time filler, just a quality mechanic doing quality work. Subbed 👍🏻
@mistersean86
@mistersean86 2 жыл бұрын
This is excellent!! I wish more how-to videos were shot so eloquently simple. This is like watching art
@jamescole6846
@jamescole6846 3 жыл бұрын
I envy your tool collection. Very nice video BTW. I watched the whole thing which is very rare on YT these days but you had no BS, no click bait, no annoying music. Keep up the good work!!
@alphamale1717
@alphamale1717 2 жыл бұрын
After 35 years with me I have a lot of tools as well.
@pennypackmtb2542
@pennypackmtb2542 Жыл бұрын
Gotta love that straight edge he used.
@wyattandwill12
@wyattandwill12 Ай бұрын
Having quality basics (ratchets and sockets) is awesome. I have Snapon 1/4" and 3/8" stuff while I'm not even a professional and I wouldn't say I regret it. The 18" Matco 3/8" ratchet I have is awesome but it's broken right now, waiting to get ahold of the Matco guy or if I can't get it warrantied being a second owner the rebuild kit is only around $35
@NamNguyen-zv7zy
@NamNguyen-zv7zy 3 жыл бұрын
Let appreciate the amount of time and effort he put to have this detailed video .guys
@anibalbabilonia1867
@anibalbabilonia1867 3 жыл бұрын
I enjoyed every single minute of it! So satisfying to watch! Just straight to the point! No introduction or talking, just straight to do the job!👌😎👍
@johnmedeiros3252
@johnmedeiros3252 11 ай бұрын
I cannot begin to express how happy I am that you're an XJ owner. I'm the proud owner of a 97 with 267k miles and counting. Your videos are practically therapy lol
@RestorationStation
@RestorationStation 11 ай бұрын
Stay tuned! Mine is 97 as well with similar mileage
@oldstudbuck3583
@oldstudbuck3583 Жыл бұрын
Much respect to the incredibly talented mechanics out there. Always amazed watching this stuff.
@AvocatDude
@AvocatDude Жыл бұрын
Enjoyable to watch these old four by fours get restored and saved for future generations. Thanks for the video enjoyed it.
@badger305
@badger305 2 жыл бұрын
From a retired mechanic, you did a damn fine job.
@dkhallal
@dkhallal 2 жыл бұрын
I have devoured as many videos on this subject I can over the last 7 months as we purchased an 89 YJ back in May. This, as many have sad but I have to say it too, by far has been one of the most enjoyable, mesmerizing, and thorough repair videos I have watched. The time you took to do all the different camera angles and the lighting being just right is beyond well done. Thank you for doing what you do, I can say I would try and tackle this myself knowing I have this video to reference. Merry Christmas to you and yours.
@bryanmahon7866
@bryanmahon7866 2 жыл бұрын
Amen to the previous comment sent by Mark. I could watch this guy's videos all the time. No music, and no one liking to here themselves talk, just all action, and tremendous attention to detail. Thank you Sir.
@kritpitako
@kritpitako 3 жыл бұрын
Right tools on the right job. I'm satisfied with these restoration.
@Joannesyoga
@Joannesyoga 3 жыл бұрын
One of my favourite restoration channels. Talented filming. Fascinating when you know nothing about cars. Better TV than the BBC. The A-Team are lucky to have you. :)
@elev8j10
@elev8j10 2 жыл бұрын
If this is a personal shop it's insane. This would be a dream shop for me. I would probably sleep in it. Cherokees take a beating and seeing bits fully restored is great.
@cherylrosalis1948
@cherylrosalis1948 Ай бұрын
When I was in my mid-teens, my Daddy had us clean the parts with rags and gasoline. Oh, the fun times. I am glad you have all of these new products to work with.
@dustinlerch9272
@dustinlerch9272 3 жыл бұрын
Best video yet of a tear down. No fluff and great angles. An ASMR quality to boot Now do the rest of it and film every bolt and connector !
@psychocyrus2046
@psychocyrus2046 Жыл бұрын
Awesome work. it`s so relaxing to watch how someone rebuild thing`s from the scrap
@tombair1401
@tombair1401 2 жыл бұрын
He makes everything look easy sign of a master craftsmanship
@rossawood5075
@rossawood5075 2 ай бұрын
Appreciate the lack of usually appalling background music! Good workmanship displayed here, now at 70 years of age with arthritus, cordless impact drivers assist me immensely , a favorite tool of mine for seriously tight larger nuts'n bolts is a 230 volt AC impact driver, always use a spray lube on threads prior. A good clean area to work in and quality tools are the mark of a good tradesman. I enjoyed viewing this well done dissasembly of the Dana, I have a D 44 HD on hi boy F 250 that will be getting some new bearings and joints soon so this was a good preview. Thankyou.
@memyself7413
@memyself7413 3 жыл бұрын
First class video and work. The whole thing could not be improved. Many on this platform could learn much from it. “Well done, you fellas, keep up the good work.” 10/10
@stevejette2329
@stevejette2329 3 жыл бұрын
Me Myself - This is VERY good. I was almost a minute in before I hit SUBSCRIBE. Snap-On, MAC, DeWalt, clean hands ... a pro.
@user-ln4fb7yi3w
@user-ln4fb7yi3w 2 жыл бұрын
Israe is alyas ahead
@rpbishop3079
@rpbishop3079 2 жыл бұрын
Obviously, something you were meant to do. No more or less than what was needed. Very well thought of and carried out. Thanks ! Now, if I can only come close ... in my driveway, in the winter, with maybe just a few flakes of snow lol. Thanks again.
@genoory5090
@genoory5090 5 ай бұрын
This gave me so much insite when I do my solid axle swap project on my 2011 ford ranger fx4. I really appreciate this video. Its well out together, the editing is phenomenal! Shows all of every detail, as if you was riggt there. Excellent guys!
@harleyvanscoy94
@harleyvanscoy94 7 ай бұрын
Well done, that axle turned out great and you didn't cut corners slapping new parts on unpainted... Respect!
@thefamouslilyQ
@thefamouslilyQ 3 жыл бұрын
I try so hard to watch other restoration Channels but I find myself coming back to your channel and and rewatching videos because I love them so much! Every video i perfection I watch them all from start to finish it calms my anxiety and clears my head thanks for the superb content ! You’re my absolute favorite yt channel!
@buyamerican3191
@buyamerican3191 2 жыл бұрын
Superb video! No talk just great workmanship. Nice to see "all" parts replaced. You sir are a perfectionist and extremely knowledgeable. I want to see more of your work, I just subscribed.
@Jpassione58
@Jpassione58 28 күн бұрын
This shit just fascinates me. When you have the right tools to do the job, it makes it so much easier.
@maxwedge5683
@maxwedge5683 Жыл бұрын
No annoying music (except the sound of the engine) No words, perfect video. It's nice to see another professional mechanic with an assortment of tools ranging from Snap-On to Craftsman. Unfortunately, since I retired I've added a few Harbor Freight items...Sorry. I know you're professional because I saw blood.
@sonofculloden2
@sonofculloden2 3 ай бұрын
Beautiful job. I love how people make comments like - “All that for a Dana 30.” Point being not all people require a 12 inch lift and heavy Dana 60 or 70. Cheers!
@mr.zelice6924
@mr.zelice6924 3 жыл бұрын
A masterpiece of a video! Well done. Could watch for hours.
@theshadow4292
@theshadow4292 2 жыл бұрын
Nice mechanical work, nice presentation, nice commentary when needed, nice silence from all outside sources, nice video work. I am a fan already. Thank you, RS.
@DeanG55
@DeanG55 Жыл бұрын
Great video! I could never even come close to any mechanical skills and work done here. But, it is a joy to watch!! Keep the videos coming!!
@user-hu6mw4ez3v
@user-hu6mw4ez3v 2 жыл бұрын
Люблю смотреть на дробоструйную (пескоструйную) обработку. Магия ! Работал в молодости аппаратом раза в три побольше, обрабатывал ёмкости 4 - 6 - 10 кубометров, с целью придания красивого матового оттенка... I like to look at shot blasting (sandblasting) processing. Magic ! I worked in my youth with a device three times larger, processed containers 4 - 6 - 10 cubic meters, in order to give a beautiful matte shade...
@datswhatiwastrynatellyall7062
@datswhatiwastrynatellyall7062 3 жыл бұрын
Not 1 word said. Still highly informative and entertaining to watch💯
@jackschitt7783
@jackschitt7783 2 жыл бұрын
Surely anyone that took the time to do all this thoroughly tested it. Lets see what it can do! That's a wicked suspension! Show the flex crawling big rocks. The gearing...is a perfect overall! Gotta show that off! (some day?) -Bert
@davidblackwell7958
@davidblackwell7958 3 жыл бұрын
Awesome, watching those ball joints fill with grease is the most satisfying thing I’ve ever seen on KZfaq.
@justrelaxing1501
@justrelaxing1501 11 ай бұрын
I really like the way you did this! You put a lot of work into this build and it looks great.
@rufusmarmeduke
@rufusmarmeduke 3 жыл бұрын
I liked how your hands looked like the Tin Man's by the end of the video, with anti-seize all over everything. I enjoyed this and the other axle so much, I really hope you do more auto restoration videos in the future. Great work!
@jproma25
@jproma25 2 жыл бұрын
kzfaq.info/get/bejne/rrepe9Sp0MDMmmg.html
@DOLPHINATOR9778
@DOLPHINATOR9778 2 жыл бұрын
High Pinion Dana 30 is a really good front axle. Very meticulous and clean work. Love your channel. Only wish you had more videos🤣👏💪💪💪🍺
@yhwe100
@yhwe100 2 жыл бұрын
With such loving and tender care. Amazing.
@jonesallu
@jonesallu 3 жыл бұрын
OTC tools - the absolute best! Wow. Top notch work.
@firstdaddy
@firstdaddy 3 жыл бұрын
Antiseize is not an addiction, it is a way of life. 👍
@pakautowheels
@pakautowheels 2 жыл бұрын
Amazing work
@user-sk1lk9hk5m
@user-sk1lk9hk5m 3 жыл бұрын
Nice work, thank you for video! I often use powder coat for my axle details, when rebuilding it. Looks nice and strong surface, but covering unpainted areas are pain in the ass:) Ford Dana 35 particularly:) Greetings from Russia!
@dougwestphal7003
@dougwestphal7003 2 жыл бұрын
Dude, You gotta really awesome tool box. Not 1 single tool used incorrectly. And you fabed some parts better than new! Awesome 😎
@williamheary1700
@williamheary1700 2 жыл бұрын
Oddly satisfying, and vary helpful. My Dana 30 is basically rusted beyond reasonable salvation so I get to do all of this to a not so holy assembly from the junkyard. Between this and the book, shouldn't be too bad to get right the first time.
@jagmasters7392
@jagmasters7392 2 жыл бұрын
The silence is golden. Your work is art. Favorite YT vid of 2021 so far. Thanks!
@danaschoen432
@danaschoen432 Жыл бұрын
This was great. If you're up too it the Dana 60 would be a great project. Plenty of those out there as well! Thanks for the excellent videos.
@stefanitha
@stefanitha 3 жыл бұрын
I really enjoyed every bolt, nut and shim of it!
@markamick5452
@markamick5452 Жыл бұрын
Wish more diy videos were like this with not a peep and just the sound of the tools…..great video
@nandom3
@nandom3 2 жыл бұрын
And the big question is: would I trust this guy to work on my car? YES I WOULD!! Great job ... nice vídeo to watch!
@charlescastillo8870
@charlescastillo8870 2 жыл бұрын
The real question is would he trust you too work on your vehicle.
@mltrymn1213
@mltrymn1213 3 жыл бұрын
39:38 "I torqued these safely off camera".... 🤣 don't we all....
@saidulusattu3824
@saidulusattu3824 2 жыл бұрын
Of uih
@BBslider001
@BBslider001 Жыл бұрын
Just WOW....elbow grease and ingenuity. Love it.
@ramiroramirez2626
@ramiroramirez2626 2 жыл бұрын
Never thought it would find a most satisfying video 👌👍👏
@Dfull86
@Dfull86 3 жыл бұрын
That Xj is going to be mint! Great work!
@orgonomix
@orgonomix 2 жыл бұрын
A good job done there and very nicely shot and edited too well done man.
@waltersempticowski1794
@waltersempticowski1794 2 жыл бұрын
first video I watch from this channel. This was the most amazing restoration video I've ever seen in my life. From Brazil.
@chrisripp9560
@chrisripp9560 2 жыл бұрын
Wow! Just Wow! It’s so impressive to watch! Thanks for the great videos!!
@user-yi7cy2cc9s
@user-yi7cy2cc9s 3 жыл бұрын
Смотрю второе видео по восстановлению мостов и не могу понять -- заливную пробку на редукторе вижу, а сливной пробки нет??? Хорошая работа! С нетерпением жду продолжения! I am watching the second video on the restoration of bridges and I cannot understand - I see the filler plug on the gearbox, but there is no drain plug ??? Good job! I look forward to continuing!
@jaybee6970
@jaybee6970 3 жыл бұрын
I would love to work for or with this guy. Master restorations!
@juanmauricioneira7864
@juanmauricioneira7864 3 жыл бұрын
Thank you and congratulations, you show the process very clearly !!
@juanlopezpolanco3400
@juanlopezpolanco3400 2 жыл бұрын
wow, master, I don't get tired of seeing him! you are very good at your job!
@samiam7
@samiam7 3 жыл бұрын
Watching the boots fill up with grease is very satisfying
@jhonnySpecail
@jhonnySpecail 3 жыл бұрын
very good work, everything was professional
@chrischery2733
@chrischery2733 2 жыл бұрын
Wowww you are so amazingly on rebuilding, and now everything is new and certified
@charlesmartell4484
@charlesmartell4484 Жыл бұрын
You got the knowledge and the tools ; great job.
@LittleMikeStarCraft
@LittleMikeStarCraft 3 жыл бұрын
It is amazing what sand blasting can take off; damn.
@edgardopanameno3828
@edgardopanameno3828 2 жыл бұрын
Sorprendente todo el trabajo que se lleva, algun dia quiero hacer reparaciones asi por ahora estudio 2º año de mecanica automotriz
@rossawood5075
@rossawood5075 2 ай бұрын
I note that appropriate rubber and brass hammers being utilised, especially to locate joints, I regret not listening to the old timers who taught me not to use my hands as hammers and not to place too much pressure on a short spanner with my thumbs, use a longer spanner, I now have thumbs thar easily dislocate and arthritic fingers, there's an appropriate tool for any job! Having said do what you have to do when caught out , oh and gloves for solvents and grease, our skin is the largest organ in the body and will absorb chemicals readily to our long term detriment. Excellent video by a well trained tradesman.
@NO-background-music-in-videos.
@NO-background-music-in-videos. 2 жыл бұрын
Love hearing the tools work. no music
@toddperry9860
@toddperry9860 3 жыл бұрын
Excellent video, I loved the no talking just good workmanship!
@MichiganPeatMoss
@MichiganPeatMoss 3 жыл бұрын
Some folks play ambient noises and music for relaxation. I put this on my home broadcaster for "soothing" ambient sounds while working in the garage. :)
@afissurya4447
@afissurya4447 2 жыл бұрын
@fred dieckmann mnhu wajanganamsurata
@humantribe
@humantribe Жыл бұрын
Nice job. Did the same about 20 years ago on my XJ because I bent the original D30. I'm still driving the XJ.
@udi112
@udi112 5 ай бұрын
Im more impressed with the level of logistics and organizing you did
@cybergoth665
@cybergoth665 3 жыл бұрын
I am in the beginning stages of starting mine. Going to be adding a truss, chromoly axles, and just over all beefing the whole thing up. Everyone tells me to just do one tons. Im just trying to clean up a Dana30/8.25 and beef them up. I dont do any crazy rock crawling and what not. mainly lite trails and mud. If I ever do rocks though I should be ok with what im doing.
@hillbillyhicks8102
@hillbillyhicks8102 2 жыл бұрын
I would at least jump up to a Dana 44. But a Dana 60 would be ideal. The Dana 30 and 35's are so fragile and weak. We also see the knuckles bow in words at the top giving you negative camber. We all ways are putting off set ball joints in to correct camber. They are just week axles in general same as Dana 44. What's strange Is the Ford f250 and f350 we hardly ever have to put cams in them for camber. But a dodge 2500 and 3500 which I believe is close to the same axle assembly will need off set ball joints just like the jeeps. At least ford's you can use can bushings.
@freeslave8824
@freeslave8824 3 жыл бұрын
Watching this guy work is akin to watching someone manicure their Zen garden - Is it the technical skill, or the science, or the art or the love or...? I don't know. But it makes me feel good!
@juanlopezpolanco3400
@juanlopezpolanco3400 2 жыл бұрын
it's impressive that work! congratulations, you are a grand master of mechanical! i love it all your vídeo about mechanic! I'm López, from Dominican Republic?
@JacksonGuitarsPlayer03
@JacksonGuitarsPlayer03 2 жыл бұрын
Be doing FULL rebuild on a loved and much valued 2003 ram 1500 hemi with over 250k miles soon. Truck all original was well took care of and maintained throughout its life. 2 owner truck second being me obviously. Original owner a good friend that lives by my parents house. He kept maintenance up on it. Got it good tires, fluids, parts. Truck is not stock, it’s got a K&N air filter, hypertech tune, throttle kit, Gibson exhaust and headers stock catalytic converter. Powerhouse. Fast truck a lot of power. It’s got rough country 4 inch leveled. Rocking BFG all terrains with nice tread. Nothing ridiculous. Looks fantastic. Stock 17 inch alloy rims on it. No body mods. All stock body wise. Truck had rear fender and rocker panel rust (Northeast vehicle) i repaired all that. Left all the small dents it’s got it adds character. Just driving it and enjoying it. It’s more of a winter truck/ enjoyment vehicle now. Was a daily for many many years. The original owner drove it everyday. He didn’t have any other vehicle. I buy I drive it everyday. I let it chill though since it had 200k when I bought it. I basically put almost 60k on it. It still goes. I can get in it and fricken floor it and it’ll fly like a rocket. I’m driving it until it’s starting to loose power. It hasn’t been drove in a little bit. I just put high quality spark plugs in it. It’s chilling under my shed all cleaned up. Pretty soon it’ll get classic vehicle plate. Like your doing here I plan on giving that truck a full rebuild of all its mechanical bits. Everything on it still works and is good. Got plans for that old boah. Glad to see what your doing here with this ole jeep Cherokee
@user-hu6mw4ez3v
@user-hu6mw4ez3v 2 жыл бұрын
Хорошо поработал ! Может при очистке внутреннего пространства, где валы, нужно было добавить густой искусственной смазки ? Потом промыть консервирующим составом. Это бы значительно увеличило срок службы моста. Well done ! Maybe when cleaning the internal space where the shafts were, it was necessary to add a thick artificial lubricant ? Then rinse with a preservative composition. This would significantly increase the service life of the Front Axle. Сейчас выпускается столько полезной автомобильной "химии" но мало кто её использует и вообще знает о её возможностях. Прошу прощения за автоматический перевод, английский учил в школе. Сдал экзамен и забыл язык напрочь. There are so many useful automotive "chemicals" being produced now, but few people use it and generally know about its capabilities. I apologize for the automatic translation, I learned English at school. I passed the exam and forgot the language completely.
@ilyaderevtsov404
@ilyaderevtsov404 3 жыл бұрын
Cold pressing is possible, but this eventually leads to a change in diameter and reduces the required tightness and precision in the joint. Therefore, it is recommended to heat the bearings up to 80-90g, depending on the preload.
@Stefibiza
@Stefibiza Жыл бұрын
Thank you very much it will be very useful to me to motivate me and to redo my dana30 more cleanly this time....... A french guy
@jorgem6261
@jorgem6261 2 жыл бұрын
When the torch was pulled out, I knew the struggle was real with that rust 🥲😂
@dogleg6669
@dogleg6669 3 жыл бұрын
You should get a brass drift for knocking out the bearing raise will prevent the possibility of damage to the bore should the punch slip. All in all a great job didn't see anything wrong with the work based on my 30 years experience as a mechanic. Love the channel.
@RestorationStation
@RestorationStation 3 жыл бұрын
Thanks
@rodrigo415
@rodrigo415 3 жыл бұрын
Why is this the best thing to watch at 4am lol
@fyzmfz
@fyzmfz 3 жыл бұрын
Exactly what i'm doing RN lol 🤣
@moerizk3753
@moerizk3753 Жыл бұрын
this guy has every machine or tool or gadget in the entire world
@SimpleLife1971
@SimpleLife1971 Жыл бұрын
That Jeep axle now belongs in the Smithsonian Institute! Outstanding restoration!
@JoeShopper
@JoeShopper Жыл бұрын
Looks like such a big job, it's hard to believe it took you less than 45 minutes to do it! Wow!
@johnnyrocket6588
@johnnyrocket6588 Жыл бұрын
It didn’t
@JoeShopper
@JoeShopper Жыл бұрын
@@johnnyrocket6588 Look. The job is done and the video is 42 minutes long. All the evidence is there.
@johnnyrocket6588
@johnnyrocket6588 Жыл бұрын
@@JoeShopper He obviously cuts the video in parts when he is sand blasting for example. He speeds the video up in certain places. He doesn’t show him completely underhauling the underbody of the jeep before reinstalling the axle. He does an excellent job. But the whole job did not take 45 minutes.
@JoeShopper
@JoeShopper Жыл бұрын
@@johnnyrocket6588 Are you saying that it took less than 45 minutes? I don't understand. The video is 42 minutes.
@tacticalty9693
@tacticalty9693 7 ай бұрын
@@JoeShopperJesus Christ… after editing ALL of the footage and putting what he wanted in the video after all said and don’t the video is 42 mins long. This process will take you much longer than 45 minutes I can assure you. Just because the video is 42 minutes long don’t mean it took him 42 mins. If there were no cuts or edits and it was just a solid video from start to finish you’d see how long it took. I honestly hope you’re just joking around, or just generally don’t have an idea of how editing works and why it is done. It’s common sense to most.
@bakDp
@bakDp 3 жыл бұрын
Все отлично выглядит. Регулировка редуктора заслуживает уважения. Но смазка опор ступиц и наконечников рулевых тяг портит общее впечатление. Четко видно как во время смазывания выдавливается пыльник верхней опоры. Из за избытка смазки пыльник наконечников рулевых тяг значительно раздувается что приведет к его быстрому разрушению.
@starvingartist6754
@starvingartist6754 2 жыл бұрын
Looks like some real fun long as you got the tools to do it, that's where I have to step aside !
@joeywarren3207
@joeywarren3207 Жыл бұрын
Wow..this is art in motion, very well done.
@pqworks9019
@pqworks9019 3 жыл бұрын
That was awesome!!!!! You did a crazy good job sandblasting and restoring all of the parts!
@BigMikeRobinsonFJB
@BigMikeRobinsonFJB 3 жыл бұрын
That rusty axles looks exactly like a brand new axle on a 2021 Ford F-150.
@navvet4518
@navvet4518 Жыл бұрын
Anti seize is underrated and underused. I use it on any mechanical fastener that I know has to come apart again. I’ve never seen anyone preserve the inside of the axle tubes. Seems logical since the they fill up with water and debris. Just a thought. Refreshing to hear no narration. Great video sir!!
@robertoferrari5397
@robertoferrari5397 6 ай бұрын
...that's a lot of things to remember😮😮...really nice job.
@HBButler01
@HBButler01 3 жыл бұрын
What a beauty!
@pakautowheels
@pakautowheels 2 жыл бұрын
Amazing work
@adailtoncamposrochacamposr8759
@adailtoncamposrochacamposr8759 2 жыл бұрын
Excelente trabalho! Ótimo Profissional!👋👋👋
@jake-hy2zb
@jake-hy2zb Жыл бұрын
This is a really amazing video. Thank you for all of the time you put into making and sharing it with us! Subbed.
@al7ootsa
@al7ootsa 2 жыл бұрын
hello, you are an artist, I really enjoy your work! thank you.
Saginaw Steering Box Restoration/Rebuild
32:11
Restoration Station
Рет қаралды 1,7 МЛН
Rear Axle Restoration and Rebuild (Chrysler 8.25)
39:40
Restoration Station
Рет қаралды 9 МЛН
Өнер Қырандары - Мешіт 2024
34:59
ONER KYRANDARY
Рет қаралды 674 М.
Wait till the end 🫣
00:10
Lexa_Merin
Рет қаралды 43 МЛН
Cool and Fun Prank on a Thief 🤭 by Snack Chat
00:27
Snack Chat
Рет қаралды 27 МЛН
Что будет с моей рукой?😨
01:00
Аришнев
Рет қаралды 2,6 МЛН
Petrol Heads version of an e-bike 1960 ,1700 solex restoration  stage one
35:44
Rusty Rear Axle Restoration and Rebuild | Suzuki Jimny 1.3
47:55
Restore It
Рет қаралды 314 М.
Building a CAT 3126 swapped F350 in 30 MINUTES!
27:23
DEBOSS GARAGE
Рет қаралды 1,6 МЛН
ENGINE AFTER 1.5 MILLION KM. WHAT IS INSIDE? REPAIR D2066 LF70
43:54
RAZBORGRUZ - РЕМОНТ ГРУЗОВИКОВ
Рет қаралды 81 М.
Huge Excavator Gearbox Repairing 😲 The Indigenous Technique
18:14
Wow Things
Рет қаралды 1,3 МЛН
Rebuilding a 4.0L Jeep Straight Six to 242HP - Engine Power S2, E14
18:43
Amazing Repairing Process of Accidental Bus in Local Workshop ||
41:46
Discovering Skills
Рет қаралды 232 М.
Мгновенная заморозка! 🥶
0:25
Взрывная История
Рет қаралды 14 МЛН
Towards three million subscribers
0:13
Arthuzinhokriwat
Рет қаралды 19 МЛН
Немцы отмечают Наурыз🇰🇿
0:44
SAU BOL
Рет қаралды 974 М.