Front Brake Pads and Rotors Replacement on Range Rover, LR4, Discovery and RR Sport in Step by Step

Рет қаралды 50,664

Күн бұрын

Hi! This is a step by step guide on how to replace brake pads and rotors (discs) on 2013-2021 Range Rover L405 HSE and Range Rover Sport L494 HSE, Land Rover LR4 2010-2016, Land Rover Discovery 2017-2021
Looking for a European car specialist in Southern California? I can help!
Click the link below to get a quote now!👇
app.shopmonkey.io/quote-reque...
✅Jack it from OFF Road Hight!
Torque specs for wheel bolts - 103 ft-lbs
OEM GENUINE BRAKE PADS:
amzn.to/32R53K6
TRW OE BRAKE PADS:
amzn.to/3LOqBOy
BRAKE PAD WEAR SENSOR:
OEM- amzn.to/3xy7bV1
AFTERMARKET- amzn.to/3ntaesX
FREONT BRAKE ROTORS:
OEM: amzn.to/49il8rO
Brembo: amzn.to/3PIprWm
The tools you need:
CAR JACK
C-CLAMP
HAMMER
SCREWDRIVERS
3/8in SOCKET WRENCH
STRAP
1/2in BREAKER BAR
17mm WRENCH
PICK TOOL
METAL BRUSH
13mm T50 3/8in SOCKETS
21mm 22mm 1/2in SOCKETS
JACK STANDS
BRAKE CLEANER
BRAKE & CALIPER GREASE
Any help would be greatly appreciated🙏 www.paypal.com/donate?busines...
Disclaimer:
Due to factors beyond the control of Land Rover Tech, I cannot guarantee against improper use or unauthorized modifications of this information. Land Rover Tech assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Land Rover Tech recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Land Rover Tech, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Land Rover Tech.
#landrover #rangerover #l405 #L494 #LR4 #disco5

Пікірлер: 137

@Alexfixty 20 күн бұрын

Hi! I provide mobile car repairs for European vehicles in Southern California. Request a quote here👇 app.shopmonkey.io/quote-request/e4c56803325fda668f1050eca12fba84?noExternalScripts=1

@jameslynch8029 23 күн бұрын

I Wish all Videos were like this,Superb step by step, missing out nothing on instalation, I did my front Brakes pads no problem,look forward to any other videos you make,Well Done You 🙂

@Alexfixty 11 күн бұрын

Glad you liked it!

@mikeg9712 2 жыл бұрын

great videos. dealership wanted $1200 to do a front brake job, with this video we did it for the cost of pads and rotors :)

@user-dn8nm9ie2y 5 ай бұрын

🎉 great step by step video. I wish everyone could be so diligent like this guy😊

@Alexfixty 5 ай бұрын

Thanks 🙏

@AdrianKurian 3 жыл бұрын

Nice demonstration

@bc3353 3 жыл бұрын

You forgot to tell us why it’s important to leave the trunk open... leave the trunk open so you disengage the suspension airbags or else you could blow the airbags wide open

@bc3353 3 жыл бұрын

But thank you for the video

@micahturner472 Жыл бұрын

Great help and superb camera quality 👌

@robbieguerrero3351 Жыл бұрын

THANK YOU SIR: ALWAYS A GREAT WATCHING YOUR VIDEOS!

@PADR 2 жыл бұрын

Good work Alex. Enjoying your vids👍

@tonifetuu4725 2 жыл бұрын

Very helpful thank you! Keep it up

@CRD020 3 жыл бұрын

Great step-by-step. Thanks!!

@Alexfixty 3 жыл бұрын

🙏🙏🙏

@mannyax7 Жыл бұрын

You’re a life saver Bro!

@jez032163 Жыл бұрын

That video was awesome, step 1 to the end complete. I'm ready to tackle my brake job.

@Alexfixty Жыл бұрын

Good luck 🤙

@anthonymorales6107 2 жыл бұрын

THANK YOU!... GREAT WORK

@marchphoto Жыл бұрын

Ok so just followed these steps exactly on my 2013 RR Sport HSE Lux and went without any issues. Thanks so much Aleks!! You saved me a lot of money. When I put my sensor back on (the old sensor) it fit kind of loosely. I was expecting it to be snug in there like when I took it off. Ok, tomorrow will be the rear brakes and rotors so I’ll comment on that video afterwards. Thanks again!!

@JoseCruz-ln7ow 7 ай бұрын

I like it , I always do my own , so it’s always good to check how other do , thanks 🙏🏽

@adriansermeno3767 2 жыл бұрын

Thanks for the video I have the exact same car and tried to do my brakes and could not find a video so just had to break down and get them done at the dealership. But I will attempt to change my oil thanks to you.. I appreciate your videos.

@edgarjimenez2965 Жыл бұрын

Alex is a legend. Teaches and saves us money, time, and our sanity. Keep up adding more videos!

@Alexfixty Жыл бұрын

🙏🙏🙏

@javiercabello3814 Жыл бұрын

Great video you just saved me a lot of money thanks from Odessa Texas

@baxterdown 2 жыл бұрын

GREAT VIDEO! Thank you so much for all the detailed information. Now I know what to do to replace my own brakes! 🙂

@Alexfixty 2 жыл бұрын

Glad it was helpful!

@davidwynne3289 Жыл бұрын

Excellent advice and great safety! 👌

@Alexfixty Жыл бұрын

✊🙌🤙

@elonmusk8667 10 ай бұрын

Thanks for the video.

@robertgibbs4449 Жыл бұрын

Excellent Videos

@davidgoulden3543 7 ай бұрын

excellent video

@RavinderSingh-yh4vd 4 ай бұрын

Very nice job

@rrshse6704 3 жыл бұрын

Great job Alex! Love your videos! :)

@Alexfixty 3 жыл бұрын

Thank you! 🙏

@phphlash 3 жыл бұрын

Nice. You should add torque specs for wheel bolts - 103 ft-lbs

@steeleroutwest769 2 ай бұрын

Thank you Alex, just finished the rear brakes after watching your video several times. Now going to tackle the front brakes after watching this video. Thank you again.

@Alexfixty 2 ай бұрын

🙏🙏🙏

@TheMzx124 Жыл бұрын

Fantastic. Doing this next week - my rotors warped and the braking causes steering wheel shudder. Great video...

@TheMzx124 Жыл бұрын

Done. It was indeed the warped rotors issue. Steering wheel vibrations completely gone, braking smooth even at 170km/h, when before the rotor changes steering wheel was shaking so bad that it made me nervous - only at light braking, though. Now it's all fixed. Thanks again for the great video...

@FS-ip2le 2 жыл бұрын

Great video! Is it possible to decide if I take the Brembo Disc 360mm or the 380mm or is there only ONE correct one? I think yours are the 360mm, right?

@princetonlomax6983 10 ай бұрын

Great Job 💪🏽💪🏽💪🏽

@juancarmona4819 Ай бұрын

Amazing! Thank you!

@Alexfixty Ай бұрын

You are very welcome!

@mvirdi2333 2 жыл бұрын

Hi. Very nice 👍 is it any chance to make videos about brembo brake pad replace. Thanks 😊

@nanakismtv 5 ай бұрын

Courage and effort = success.

@Alexfixty 5 ай бұрын

💯

@chajimckee9213 8 ай бұрын

Thanks Bro excellent Stuff!!!!

@Alexfixty 8 ай бұрын

Glad you enjoyed it

@filiepwauters 2 жыл бұрын

A great Thank you for this clear explanation. I replaced both front and rear brake pads with your help and this would have costed in Belgium 2 x 400 € = 800 €. I ordered them from Autodoc and costed me with new sensors 100 € for 4 wheels. Took me 1 hour per axis . Thanks

@Alexfixty 2 жыл бұрын

I’m glad to help

@brianxavier777 Жыл бұрын

Thanks!

@robertpetersen2905 2 жыл бұрын

Rear brake replacement. Do you have to replace rotors and sensors when you replace new pads. Great instructions!!!!

@otiojc 9 ай бұрын

saved me alot of money thank you

@Alexfixty 9 ай бұрын

✊

@davidemiorelli 2 жыл бұрын

Is it necessary to replace brake pads sensor when installing new brake pads and disc? Or i can keep the stock one?

@mvirdi2333 2 жыл бұрын

Hi 👋 Is it possible to make videos for L405 remove rear seat 💺 and electric seat control module please. Thanks

@stephenrobertdougherty802 3 жыл бұрын

Good job 👍

@Alexfixty 3 жыл бұрын

Thanks 🙌

@phanhoang1547 Жыл бұрын

Hello, for the 2016 Land Rover LR4 rear brake change, do I need to put to brake maintenance mode? Can you show how?

@startingtech3900 9 ай бұрын

Alex the goat I have discs and pads coming

@Alexfixty 8 ай бұрын

Good luck!

@freddygarrett 3 жыл бұрын

Thanks man super cool thanks

@Alexfixty 3 жыл бұрын

🙏🙏🙏

@obedchux987 3 жыл бұрын

@@Alexfixty Good Day! Pls I loosed and removed the two back brake callipers to compress them as the new pads wasn't entering, after fixing them back and bleeding, the brake pedal goes flat at first and comes a bit hard after several pumping but still goes flat when left for few minutes, had tried several means of bleeding, even changed the brake master and ABS Module but still having same brake failure. Kindly help urgently. It's a Range Rover 2014 Autobiography. Please help provide solution to me as I've been on this for two weeks now customer running out of patience for mare changing of Brake pads

@sattam222 3 жыл бұрын

Thanks a lot 👌💐👌💐👌💐

@BaljitSingh-zo5us Жыл бұрын

Nice

@vymerrem6268 3 жыл бұрын

Алексей, крутое видео снимаешь, профи

@Alexfixty 3 жыл бұрын

🙏 🙏🙏Спасибо!

@stevenscales4328 2 ай бұрын

Very descriptive.

@Alexfixty Ай бұрын

Thanks 🙏

@sistercalhoun4444 5 ай бұрын

Does the Brake mode procedure work for a 2017 Range Rover Evoque HSE ?

@Mike-ug3ui 2 жыл бұрын

Best Videos!!!! the mechanics at dealership are useless!!!

@princeg24 2 жыл бұрын

Is the velar model similar to this?

@grinellsmith 3 жыл бұрын

So clear. My good friend who had a 2016 LR4 just passed away a few weeks ago and before he died he asked me to give it a once-over for his wife. Going to do the brake pads, front and rear, in a couple days. Anything special about the rear pads? Also, do I need to replace the sensors? (BTW, the dealer quoted her $2850 for new pads, rotors, and sensors..!)

@Alexfixty 3 жыл бұрын

No way, so expensive. If the sensors are damaged and worn out by thin brake pad you have to replace them.

@culpyy Жыл бұрын

Hi Alex. Thx for the video. I couldn't get my car into maintenance mode. I started the engine and released the e brake manually. I could not compress the brake piston back. Looks like I need to replace the caliper now. It's seized. For the other rear, don't attempt to disassemble until in maintenance mode? Thanks for the time.

@Alexfixty Жыл бұрын

Hi! Not sure what you did, there is a step by step explanation on how to do the rear brake pads. If you are not sure what you have done, I better recommend to contact a specialist who can help you with that. Sorry to hear that!

@henrychavezoficial 2 жыл бұрын

Nice video! Helped me out a lot, one question though. How many brake sensors total? 2 or 4?

@Alexfixty 2 жыл бұрын

As I remember just 2

@mrkushykush1 2 жыл бұрын

Bleeding brakes requires?

@anxmatrix 3 жыл бұрын

Thank you for the video. Can you advise what size C Clamp you used for caliper compression step?

@anxmatrix 3 жыл бұрын

If anyone was wondering about this around @3:28 once the two bolts are removed I took off the caliper first then used a 4 inch c clamp to push in the piston.

@justdave5121 3 жыл бұрын

Just make sure your reservoir is opened and take some fluid out when pushing the piston back. Only if your brake fluid is full you need to take some fluid out or it will overflow when doing this piston retract.

@anxmatrix 3 жыл бұрын

@@justdave5121 I saw this step left out from video but I have done brakes before and did ensure the brake fluid reservoir cap was open. Good info for others though.

@marcos3ltrv6 Жыл бұрын

great video, is it necessary to change the wear sensor every time?

@Alexfixty Жыл бұрын

If it’s damaged

@ironhorsehero1988 11 ай бұрын

I’m going to change the discs on my daughter’s Range Rover Velar, I’m guessing the procedure will be very similar to the Range Rover you’ve just done, very helpful, thank you.

@Alexfixty 11 ай бұрын

Good luck!

@alexkatler 11 ай бұрын

Let me know how it goes if you can. I'm about to do front and back pads/rotors on my 2019 velar R dynamic Hse Good luck

@ironhorsehero1988 11 ай бұрын

@@alexkatler They didn’t require changing, the discs had some rust around the edges, I cleaned them with a drill and abrasive flap wheel and they were good enough to pass MOT. I couldn’t find a way of unlocking the hand brake as the Velar’s brake is fully automated ( no lever/switch) so I think some sort of OBD tool would be required to enable changing them.

@RC-gi5en 3 жыл бұрын

Alex, great channel. Have you considered using content from your customers vehicles, just love to see more repairs especially L405 air shock replacement. Keep up the great channel.

@Alexfixty 3 жыл бұрын

Thank you! I’ll be replacing front shocks later this year, I’ll make a video 👍👍👍

@RC-gi5en 3 жыл бұрын

Awesome thanks Alex, “Great channel”

@jimmysoto9617 2 ай бұрын

Can you put link for oem rotors pls. Great vid, thanks!

@Alexfixty 2 ай бұрын

In the description amzn.to/49il8rO or amzn.to/3PIprWm

@noway961 3 жыл бұрын

Hey Alex, do you know how to permanently disable Tire Pressure Monitoring and Stop Start on the L405 2017?

@Alexfixty 3 жыл бұрын

Hi! Most likely using sdd and changing configuration file

@shawnrogers116 3 жыл бұрын

Nice video. I’m in LA area. Are you available to hire?

@innovationpropertyatlanta 2 жыл бұрын

Do you have to replace the rotors every time you replace the brake pads? My rotors appear to be fine and dont vibrate but brake pad light came on.

@user-ym9wb2mk5e Жыл бұрын

Been a while since you posted, but you can also have your rotors “turned” at Oreilly s auto parts. I think they charge $20 per rotor. Drop them off in morning and haven back a few hours later. If the rotors are within spec, you have at least one “turn” you can do on a rotor, instead of buying new rotors . You DO want to turn or replace each pad replacement otherwise your pads get chewed up faster and possibly glaze (the rotors turn a bluish red tint from overheating) the rotors.

@Mike-ug3ui 2 жыл бұрын

Alex, we don't need to put the vehicle in service mode to replace front brakes pads?

@Alexfixty 2 жыл бұрын

We don’t 👍

@flashtothepast4816 Жыл бұрын

Can we get a channel where you change out the oil

@mvirdi2333 2 жыл бұрын

Hi 👋 do we need to change brake sensor wire every time change brake pad or can use the same old. Thanks 😊

@Alexfixty 2 жыл бұрын

Hi! If the sensor is good and there is no brake light on dashboard, no need to replace it

@mvirdi2333 2 жыл бұрын

Thanks 🙏

@jaspercurtis8439 Ай бұрын

Hi mate, i have an autobiography 2022 do you think these are similar ?

@Alexfixty Ай бұрын

It’s different

@brandenliu6595 8 ай бұрын

after I change the front pad and sensor. The brake warning light is still on. How do I get rid of the warning light?

@wilfreddzorgbenyuie404 3 жыл бұрын

I like your simple illustration but you forgot about the suspension button. Good job!

@Alexfixty 3 жыл бұрын

Thanks!

@obedchux987 3 жыл бұрын

@@Alexfixty Alex kindly respond to my comment asap please as I'm seriously under pressure, please come to my rescue urgently

@dustinolson7859 Жыл бұрын

So if you do put new rotary’s and pads do you have to replace the sensor? Could you not just put the old one on?

@Alexfixty Жыл бұрын

If it’s not damaged

@obedchux987 3 жыл бұрын

Good Day! Pls I loosed and removed the two back brake callipers to compress them as the new pads wasn't entering, after fixing them back and bleeding, the brake pedal goes flat at first and comes a bit hard after several pumping but still goes flat when left for few minutes, had tried several means of bleeding, even changed the brake master and ABS Module but still having same brake failure. Kindly help urgently

@Triplemyworth709 Жыл бұрын

Did you ever find out what caused your problem?

@blackvulcan100 Ай бұрын

Do you need a new sensor every time you change the pads ?

@Alexfixty Ай бұрын

If it’s damaged you have to replace it

@Biggest1ofthem 2 жыл бұрын

Here are some more torque specs 13mm Bolts - 26 ft-lbs, Rotor torx 50 bolt - 12 ft-lbs and caliper bracket bolts - 208 ft-lbs

@Makis0007 25 күн бұрын

Please, where can I find that information?

@markoradovanovic7255 9 ай бұрын

My rear passenger side brake is stuck what I need to fix I hear park brake engine bit this is stuck

@obedchux987 3 жыл бұрын

Please can anyone with an experience to my comment come to my rescue pls?

@rusbekdiushebekov3717 3 жыл бұрын

алекс сними еще на звдние как менять...

@Alexfixty 3 жыл бұрын

В ближайшее время планирую 👍

@easyerthanyouthink 3 ай бұрын

lol , the front connecting part of my sensor broke pulling it off ,also my bolts for the claliper bracket are like 12 bi point nut

@RobertWhittaker-ew4en 6 ай бұрын

The bottom splash sheid screws rust and are a pain to replace

@Pagemarks Жыл бұрын

Why put vehicle in access height? When jacking vehicle, shouldn’t it be in off road height?

@Alexfixty Жыл бұрын

You are correct ✅

@dkautollc 3 жыл бұрын

👍🏾👍🏾👍🏾

@nightwalker9828 3 жыл бұрын

13:11 that caliper is smiling

@marcoperez6952 2 жыл бұрын

Why did you disconnect the sensor wire then reconnect it? You didnt replace it. So why do it?!

@RobertWhittaker-ew4en 6 ай бұрын

Thr ground lug on the cradle can corrode and fall off. Happened to me.

@sikais66 2 жыл бұрын

Put a piece of wood on the rotor, then you can hammer it

@dilippatel3268 27 күн бұрын

excellent video

@Alexfixty 11 күн бұрын

Thank you very much!