FRONT Cherokee XJ Notch Customs Fender Flare Install

No video

FRONT Cherokee XJ Notch Customs Fender Flare Install

Рет қаралды 2,660

Күн бұрын

In part 2 of the Cherokee Resurrection Series we're going to be installing the FRONT Notch Customs Fender Flares. (In part 1 we installed the rear). These open up the wheel well quite a bit...perfect if you want to run a bigger tire. Stayed tuned till the end for a HUGE surprise.
As always thank you for watching! Be sure to subscribe as we have A LOT coming your way!
Dana 30 vs. 44 vs. 60 (Our previous video I mentioned in the video)
• Dana 30, 44, 60 - Whic...
Be sure to follow us on Instagram for real time updates!
/ backcountrybeagles
We'll see you out on the trail and we'll see you next time!
-The Backcountry Beagles
Ash, Ron, Bella, Natalie & Lilli
00:00 Intro
00:23 Part 1 Recap and FRONT Notch Customs Fender Flare Install
02:02 Cutting the fender to size
03:57 Ditching the Dana 30, Ford 8.8 and 35" tires
04:52 The decision to go One Tons and 40" tires...
06:45 Dana 30 axle swap to the red cherokee
07:55 Axle size comparisons
09:10 Why resurrect the red jeep too?
09:48 Switching the beadlocks to the 35" procomps
11:44 Outro

Пікірлер: 30

@backcountrybeagles 6 ай бұрын

We went from installing fender flares....to installing one tons? We're confused too but we're not complaining!

@dustinsnider1646 16 күн бұрын

I love that everyone else suffers from the "might as well" attitude I have when building a jeep. If you're going to notch the wheel well you might as well do a one ton swap and run 40's 😂 love this content!!

@backcountrybeagles 12 күн бұрын

LOL .... might as well!

@thebeautifulbookmethod9719 3 ай бұрын

Thank you so much for making these videos. So fun to watch. The quality of the film making, the work, and the inspiration level is just awesome, dude.

@backcountrybeagles 3 ай бұрын

Thanks so much for the kind words! More to come!

@cgtanker74 7 ай бұрын

Love y'alls videos keep it up! Green jeep is gonna be sweet on the tons & 40's.

@backcountrybeagles 7 ай бұрын

Thank you, can’t wait!

@nikthepunisher6255 7 ай бұрын

So excited for the green jeep!!!!! Love your build videos!

@backcountrybeagles 7 ай бұрын

Thank you!

@280Zombie 6 ай бұрын

How come it says 2 videos are unavailable and hidden? I'd love to see all 4 videos if possible. Keep em coming! 👍

@backcountrybeagles 6 ай бұрын

That was a problem with the playlist on our end, should be fixed now. One is still “unavailable” because it’s Wednesdays video, thanks for bringing that to our attention!

@fuego_jonny6528 2 ай бұрын

Great video bro

@backcountrybeagles 2 ай бұрын

Thank you!

@ginnyberube6951 7 ай бұрын

Great job as usual!

@Paper452 5 ай бұрын

Really enjoying this build, hate to ask but do you have any more info on your tire carrier.. If you built it which I think you did can you cover it in a video? Thanks

@backcountrybeagles 5 ай бұрын

There’s two videos about a year or so back on this channel where I started that rear tire carrier build. Never finished it or the videos. I can certainly talk about it in an upcoming video although I’m probably going to be removing it here shortly to go another route.

@abstract1dea 4 ай бұрын

I don't think a snorkel will work with these flares. Not without some "modifications" Does look great.

@backcountrybeagles 4 ай бұрын

I’ve seen one done with these flares, the snorkel was heavily modified to get it to work. I don’t think I’ll be going to snorkel route anymore. Currently looking in the “cowl” induction intake. A few company’s make them. Might be my only option because of my coilover towers/crossbrace now.

@DCarter355 7 ай бұрын

Man I love those fenders, I would love them but I think I would rip them off. I already have cut fenders and they would look pretty good.

@zb6618 6 ай бұрын

I would look up notch custom’s torture test for the flairs

@DCarter355 6 ай бұрын

@@zb6618 ⁠yea, since I posted that comment I went out and on a wet trail my jeep was covered in 5 mins. It has really made me rethink them.

@backcountrybeagles 6 ай бұрын

Bashing them up on the trail is my fear as well but after watching notch customs torture test video I was sold… obv these have a better chance of breaking compared to a steel fender flare/armor but that’s the chance I’ll take. Love the look of these.

@user-hq8wg4xe9r 7 күн бұрын

What is your lift kit 6"

@backcountrybeagles 5 күн бұрын

Yes, about 6” at this time.

@anthonyduran6637 Ай бұрын

Sick build! Would you be able to get me the dimensions of how far the front and rear render stick out from the jeep?

@backcountrybeagles Ай бұрын

Thank you! Front measure 4.75” off the fender and the rear at 3.75. Hope that helps!

@anthonyduran6637 Күн бұрын

How long did you wait for your fenders to arrive after ordering them? I just picked some up for the build!

@backcountrybeagles Күн бұрын

@@anthonyduran6637 Sweet man! It was awhile ago but I remember being surprised it was quick. I think 3 weeks and the website said it would be seven.

@NGWrenchin 3 ай бұрын

Hey man, can you measure how wide the Notch flares come off the fender? I'm considering getting a set to run some factory JK wheels and tires on my stock XJ while i build up the rest of it, but can't find anything online about how wide they actually are

@backcountrybeagles 3 ай бұрын

Sorry for the late reply, just got around to measuring for you, front measure 4.75” off the fender and the rear at 3.75. Hope that helps!