FRONT CV AXLE DRIVE SHAFT REPLACEMENT REMOVAL MAZDA 2 3 5 6 CX-7 CX-5 CX-9 CX-3

No video

FRONT CV AXLE DRIVE SHAFT REPLACEMENT REMOVAL MAZDA 2 3 5 6 CX-7 CX-5 CX-9 CX-3

Рет қаралды 167,895

Күн бұрын

FRONT CV AXLE DRIVE SHAFT REPLACEMENT REMOVAL MAZDA 2 3 5 6 CX-7 CX-5 CX-9 CX-3
If you have Mazda and you need to replace cv axle drive shaft we will explain what needs to be done to remove and replace the cv axle drive shaft. Most front wheel drive cars will use this design of cv axle drive shaft even SUVs. We demonstrated how to remove and replace the CV axle drive shaft on Mazda CX-7 but it should work on multiple Mazda engines and models.
This video may be helpful on:
Mazda 2 CV Axle Drive Shaft Replacement Removal
Mazda 3 CV Axle Drive Shaft Replacement Removal
Mazda 5 CV Axle Drive Shaft Replacement Removal
Mazda 6 CV Axle Drive Shaft Replacement Removal
Mazda cx-9 CV Axle Drive Shaft Replacement Removal
Mazda cx-7 CV Axle Drive Shaft Replacement Removal
Mazda cx-5 CV Axle Drive Shaft Replacement Removal
Mazda cx-3 CV Axle Drive Shaft Replacement Removal
Mazda Miata MX-5 CV Axle Drive Shaft Replacement Removal
Mazda rx8 CV Axle Drive Shaft Replacement Removal
► CV Axle Drive Sahft Popper Kit: amzn.to/31ktWup
► CV Axle (Check for Your Model): amzn.to/33yGJuH
► Check out our Amazon Store for the tools and parts that we use: www.amazon.com...
► Our Website: mechaniclifesty...
► Our Baby Girl Channel: goo.gl/WiVs8Y
► Our Second Car Channel: goo.gl/XB6fHq
► Honest Product Review Channel: goo.gl/sMPQXk
► GoFundMe Link: goo.gl/pUife3
Our Most Popular Videos:
► Bumper Repair: goo.gl/XBe4Sh
► Missing Wheel Lock: goo.gl/5n4a5i
► Bearing Replacement: goo.gl/JSNDnZ
► Restore Headlights: goo.gl/qVhDkf
♦♦♦ Cameras & Gear Used For This Video ♦♦♦
•Cameras
Panasonic Lumix FZ300: amzn.to/2BNWtNA
•Tripod
Polaroid 72-inch: amzn.to/2iVTmP4
•Microphone
Polaroid Pro Video Condenser: amzn.to/2krpSsA
•Light
NEEWER 160 LED CN-160 Dimmable: amzn.to/2jjg9Bd
•Comuter for editting
Lenovo ideapad 310: amzn.to/2kqUNFl
♦♦♦ Other Equipment and Gear that I use ♦♦♦
•Camera
Sony HD Video Recording HDRCX405: amzn.to/2jk8nqB
•GoPro HERO5 Black: amzn.to/2ktNKfj
•Extra Computer For Editting
Lenovo Ideapad 510: amzn.to/2ktOuB7
► Like Us on FACEBOOK: / worldmechanicsofficial...
► LIKE & SUBSCRIBE for MORE DIY VIDEOS that could SAVE YOU BIG $$$$$$$ !!!
This is not a sponsored video. Everything is purchased by us!
The video is meant for entertainment purposes only. Do not Attempt!
AMAZON ASSOCIATES DISCLOSURE
Auto Repair Guys is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com
*Disclaimer
We, Auto Repair Guys, are not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information given in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not Auto Repair Guys.

Пікірлер: 73

@AutoRepairGuys 4 жыл бұрын

⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: kzfaq.info ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys

@wayneesau2047 3 жыл бұрын

Hi what is the spline count on the outer cv joint

@BradGryphonn 2 жыл бұрын

Just a hint: When you are removing those axle nuts, you can leave the wheel on, and lower the jack so the wheel is on the ground. Pop the little cap at the centre of the wheel and you can get a socket onto the nut. Make sure it is in park or in gear with the handbrake on, then crack the nut. Then you can jack the car and remove the wheel and continue on with the job. This is a good method if that nut has bound itself onto the thread.

@deez_venture Жыл бұрын

i put a big screwdriver in the fins of the brake disk

@ImAaronToasty Жыл бұрын

my wife's cx-3 clicks when turning. i thought it would be something i would have to take into the shop. Thanks to you guys, im confident i can do it myself 😚😚

@inee107 4 жыл бұрын

"careful not to damage anything..." *boom, hits the fender with hammer swinging up

@CTSSTC 2 жыл бұрын

9:30 that upswing has me flinching D: At least I'm not watching in 3D lol

@tampareellegendz8814 Жыл бұрын

😂😂

@kenttormanen63 9 ай бұрын

He calls his hammer "lightning", it never hits twice in the same place.

@HeavenReservation 2 жыл бұрын

I don't why, but I smile every time you use that hammer! Great job of explaining the inner and outer issues.

@Angels_z34 Жыл бұрын

With that rev up at the beginning of the video i was waiting on "REV UP YOUR ENGIIIINES!!"

@adzorart 2 жыл бұрын

Thank you for showing the axel pop tool , that’s what I need . But I found it much easier to remove the 2 bolts on suspension strut and retaining clip on brake line and just swing the whole lot out with steering hard right.

@adzorart 2 жыл бұрын

No need to remove the steering knuckle or ball joint

@isabelleanimalcrossing1896 Жыл бұрын

You are right. Did it by taking those 2 strut bolts off, too. Much easier.

@adrenalewie8135 3 жыл бұрын

6:41 Gently tap on it... *WACK! WACK! WACK!* Great video guys. I'll be using this video here next week on my car

@julioarias4160 3 жыл бұрын

You could of also put a flat head screw driver between the caliper and the rotor to hold the wheel from spinning

@danielhinchcliffe3559 Жыл бұрын

11 seconds in and I'm already glad I'm here

@MrFivepointfivesix 3 жыл бұрын

Milwaukee M18 impact will get that axle in that off in about 2 seconds believe me it's worth every penny of it I've got one and save the hours and hours of time grief 😉👍

@deez_venture Жыл бұрын

Thank you! I need to fix my mazda 5! great video! Now I have a weekend project! its making noise when i turn and vibrating my steering wheel so bad my hands go numb! Then slowing to a stop fast... yea thats hella sketchy!

@chrismullin3986 3 жыл бұрын

Do you need to empty gearbox of oil before removing cv axle?

@Back2Naturr 3 жыл бұрын

On my 2006 mazda3 2.3, I couldn't fit the axle tool inside so I had to tap it in just to fit. Thank goodness it popped right out. Went from changing the strut to replacing the axle to replacing the knuckle. Got hit by a semi truck

@peterzuehlke 2 жыл бұрын

I hammered on my axle for an hour and it didn't move cause of rust. Got a Front Wheel Drive Hub Puller (about $35 to buy and Autozone lends them out) and pulled the hub off the shaft. Cleaned the rust out of the splines and the new one slid right in.

@danthemanoftheland Жыл бұрын

Thank you! Another great video that will be very helpful! Great explanation and detail.

@orox2082 Жыл бұрын

Love your channel!! More cx9 please!

@rakeshmahadevan269 3 жыл бұрын

Live saver video for Mazda CV axle change 🙏

@endrihoxha2364 4 жыл бұрын

Hi guys great vidios. Can you guys make a video on how to remove the lower control arm on Mazda cx7? Thanks

@railerz101 2 жыл бұрын

Good job guys. Very informative

@clarkjoel 3 жыл бұрын

Like your videos, but for a 2020 cx5 awd, Just need to know what fluid came out when i pulled driver side axle out. More came out when i started vehicle with axle out.

@WesW3187 Жыл бұрын

Warts and all. That’s how we punters find it. It almost never comes perfectly. Thanks.

@MrFivepointfivesix 3 жыл бұрын

Dude if you could have thrown the name in Ricky Bobby every once in a while that would have been so cool 👍

@felixsantiago8230 3 жыл бұрын

Good video...keep doing the good job

@user-nr1pg5od5x 8 ай бұрын

I have a 2013 Mazda. CX9 that on the passenger side. Looks like it has a Carrier bearing like. And it's gonna long shraft. It goes from the CV joint to the transmission on the passion your side. How do you propose I Remove this ? Where can I find some of those CV pop out tools?

@pastorpatrick1077 4 жыл бұрын

Please, is the left front drive shaft of Mazda 5 the same with the left or are they different? Please, I'm waiting for your response. Thanks.

@carlosbanegas7577 Жыл бұрын

THANK YOU VERY MUCH

@drewbush6535 Жыл бұрын

i dont have those symptoms. mine makes bang noise manual transmission. mostly in reverse lift clutch bang when engages.

@larrymcgregor2277 4 жыл бұрын

Very good and informative video.

@HousesandCars Жыл бұрын

Nice gold ⌚ watch

@maranathacristovienepronto198 9 ай бұрын

I have a question, when you disconnect the tie rod, does the car misalign or nothing happen?

@user-ld5hu9mo9u 8 ай бұрын

Yes. You are recommended to get an alignment afterwards.

@andreabengoa9670 3 жыл бұрын

Could a broken CV Axle on Mazda 5 be the cause of transmission grinding , will replacing fix the problem or do you think i need transmission and CV axle ?

@terryfreedom9742 4 жыл бұрын

Mine is stuck like this and I've beaten the living shit out of it.

@dannydang5244 3 ай бұрын

Lol used the fry bar to push it down lower control arm

@t-b0nestream 3 жыл бұрын

Couldn’t you have made your lives easier by removing the sway bar links?

@ozarkcharlie9331 3 жыл бұрын

You guys are awesome👍🙏

@Devo1987 3 жыл бұрын

Do you need to drain the ATF fluid when changing CV AXLE ?

@TrapGodOfficial 3 жыл бұрын

@Eli_is_a_Lauver 4 жыл бұрын

Well done!!

@noraliasmat4878 4 жыл бұрын

great video, thank you for sharing it with us..

@LoveLivingLifeLaughing 2 ай бұрын

Be careful not to damage anything.... "bonk" 😂

@rapinncapin123 Жыл бұрын

Was the first step necessary?

@bullridermusic2054 4 жыл бұрын

will this be the same for my 2011 Mazdaspeed3?

@MaestroBass 4 жыл бұрын

I'm need to know the same thing my passenger side went out

@tristaylor5492 4 жыл бұрын

Great video, thank you

@Thabzalzk Жыл бұрын

My mazda6 make vibration noise when i apply brakes especially when I m driving at high speed. What could be a problem?

@stevensolis6507 Жыл бұрын

What brand of CV axles did you use for this car?

@evanepp 4 жыл бұрын

ANOTHER GREAT VIDEO! THANKS!

@vince_only_way_is_up 4 жыл бұрын

To get lower ball joint out, i screw a small bolt between the 2 sides to put apart and it comes out easily.

@michaeljensvold6160 3 жыл бұрын

Please include model years and or 1st generation, 2nd generation, 3rd, etc

@ExcitedCrayons-ff2tg 6 ай бұрын

Front right cv shaft cx7

@pitviper7924 9 ай бұрын

Was @2:42 that little puppy holding down the brake or was it the woman?

@josephfortier536 Жыл бұрын

08 Mazda cx-9 cluck when turning and vibration on acceleration

@radekw708 4 жыл бұрын

The ball joint bolt was not that easy, had to cut it dremel through it and then finally hammer it out while heating the knuckle with wet rag around cv boot and ball joint rubber. Pain! 4 hours! Seized by 5yrs of salt. Initial hammering on bolt how you had it, stripped the thread and eventually bolt bent. Other side , bolt stripped out.

@Taronenko1 4 жыл бұрын

Radek Woj literally the same exact shit happened with me, tried doing it myself ended up limping it to my mechanic

@radekw708 4 жыл бұрын

@@Taronenko1 That screw is a nightmare! I almost took it to the mechanic too but after 4 hours I ended up getting it, never gave up :)

@rapinncapin123 Жыл бұрын

Couldn't you just remove other easier things to get access Like the brake bracket Make the 2 shock bolts...

@ivettetorrales1556 Жыл бұрын

Rookies lol 😆 😂 🤣

@kennethdandurand3472 4 жыл бұрын

You need to show the 'driver' a little bit more.... He is cute.. Just sayin' guys.

@JuanGonzalez-vn7zg 4 жыл бұрын

I cant remove the flatten spot on the nut -.-

@miguelangelo5316 4 жыл бұрын

Okay

@rajendraverma4971 4 жыл бұрын

Sir india thanks

@ultimateundermountain8508 4 жыл бұрын

Thanks for doing these :) I noticed in your Jan 2017 version of this kzfaq.info/get/bejne/mZebequruK6olqc.html that you removed the tie rod, but this time you didn't. If you do not remove the tie rod, do you still need to have an alignment done afterwards?